Consolidate Multiple Workbooks Into The Master Workbook?
Jun 12, 2013
how to consolidate multiple workbooks into the master workbook? I need to consolidate 12 workbooks into the master workbook every month. The subsidiaries will report me their figures monthly. Hereby attached one of the subsi, "B Co" reporting package, and the master copy "XYZ Holding Co" how it look like. Hence, may I know how to write a macro so that it will auto update monthly when the subsidiaries return me their reporting package, so that I can auto update in my master copy for tab BS and tab PL.
I need a macro that would consolidate all data in multiple worksheets of multiple workbooks in one Master file.
All the workbooks will be in one particular folder. The macro should search for data in all the workbooks and consolidate it in one master excel workbook.
I am currently using both excel 2007 and excel 2010. This macro would really reduce manual work as currently consolidating data from 45 to 50 sheets takes an ample amount of time...
l need to consolidate up to 3 columns of data from a varied number of worksheets within the same workbook. The sheets are (format/layout) structured in the same way. The columns need to get added next to each other in the consolidation sheet.
I need to consolidate a lot of information from multiple workbooks all the workbooks are located in a folder, i am not bothered about running each one separately or a group at a time, each work book has ten sheets with each sheet in the workbook being different, it needs to add to the next blank row on each sheet.
I would like to merge multiple workbooks into a master workbook. All the individual workbooks are identical and only have 1 sheet, and I would like to append them to the master as worksheets then sum them all together. The front sheet showing the totals from all the merged ones.
At our small firm, each staff member keeps a small excel spread sheet on the network that contains their "work in progress." This spreadsheet is roughly six columns wide and roughly twenty lines long.
What I am attempting to do is have one "master" spreadsheet with a tab for each staff member that links their "work in progress" so that partners and managers can easily see how much work each of the fifteen or so staff members have.
I can create fifteen different tabs and fifteen different files on the network and link =[Staff1.xlsx]Sheet1!$A$1:$G$25 =[Staff2.xlsx]Sheet1!$A$1:$G$25 =[Staff3.xlsx]Sheet1!$A$1:$G$25 and so on.
If I make a change to the layout of the work in progress sheet, I have to delete and copy the file fifteen times, then go back through and re-link fifteen tabs to fifteen workbooks in order to keep it uniform.
I want create a macro which will extract 6 values (see below) from a workbook tab called summary to an master workbook for reporting purposes. Each workbook has a unique file name e,g ACI1150.
Values on sheet SUMMARY: A1 A2 A3 G21 G24 G26
I tried to adapt the below to get one item copied/extracted. However it would no work.
I am new to using macros
Sub GetG26s() Dim MyDir As String, FN As String, SN As String, NR As Long Application.ScreenUpdating = False
I'm trying to take a single worksheet from a workbook and merge them all into one workbook. In that master workbook I'm looking to have each of the worksheets on different tabs and the tab names as the original workbook name.
So if I have Workbook1, Workbook2, Workbook3, Workbook4 in a folder. I want to open a new spreadsheet, run this macro, select the folder with the Workbooks in, and have it take the range selected from the worksheet 'other' from each of the workbooks and generate a 'master' Spreasheet where each tab would be called Workbook1, Workbook2, Workbook3, Workbook4 and the contents would be from the 'other' tab
I found some of Ron de Bruin's code online which I've tried to customise.
Currently this takes a range from the tab specified, puts it into an array and then pastes it all into different columns on one worksheet. change this so that it creates a new worksheet for each original workbook, and names it after that workbook.
Is it possible to VLookUp Data between multiple workbooks (12 different workbooks to be exact) in one master sheet?
I would like the master sheet to find the empty data for the item number. Basically, how can I automatically populate the empty data for each item number in the master sheet. Every item will be different. The 12 workbooks are invoices throughout the year (Jan, Feb, Mar, Apr, etc) and these workbooks have the data needed to fill the master sheet. How is this possible? Or is it not?
Master sheet.xlsx -Contains item number -Purchase Date -Sell Date -Purchase Price -Sell Price -Profit Price
The 12 workbooks are the 12 months out of the year, which are invoices.
- Contain the data needed in the master sheet such as sell date, sold price, and profit.
The reason I would like to keep the 12 invoices as workbooks instead of worksheets in 1 big file, is due to the high capacity of item numbers each monthly invoice would have. For example (approximately 500 items in each workbook)
I have for hours and weeks, actually months, But I haven't found any sources on the internet, although I have seen the VLook Up how to's on youtube between 2 workbooks, but not the 12 I would like.
I am trying to combine several workbooks containing data in multiple sheets into a master workbook. All the workbooks have the same number of worksheets. I would like to combine all data in Sheet1 into a new Sheet1, all data from Sheet2 into a new Sheet2, etc.
I got a master format in xl2010 to collect data, which is being circulated between my team. members fill in their respective data n mail back the file with their name attached to file name. i want to creat a macro which can copy the data from every members file to master file.
I have 17 workbooks which contain similar data and formatting. The only variance is the number of rows of data in each. I want to write a macro in the Master worksheet that will accomplish the following
1. Create a worksheet name in the master workbook with the same name as the workbook that it's pulling data from. 2. Copy over the column headings from columns A:P to the newly created worksheet on the master workbook 3. Copy over all rows that contain the word "down" under column D titled Operational status
The naming convention for the master workbook will be titled "All Switches". The naming convention for the worksheets containing the data are titled Port_Map_on_tiegcsw01, Port_Map_on_tiegcsw02, Port_Map_on_nypgcsw01. There are other names , but I can reference the code an update accordingly.
I found some searches on the forum for creating a macro to copy data between workbooks, but not quite sure how to write the macro for the three functions.
how to loop through workbooks in a certain directory and copy the rows in sheet1 where column B contains numbers greater than zero, and then pasting them into a new master workbook. The sheets will be named differently each week but will always be in the same directory.
I am trying to automatically transfer data from nonadjacent cells (C1, B5,B10,B16,B22,B28) from multiple workbooks in a masterworkbook folder from A2:F2. I am a novice at VBA. I am not able to copy as Range("C1,B5,B10,B16,B22,B28") and the way it currently is coded only the last copied range (B28) is pasted to the master workbook. The data pastes to A2 in the master workbook instead of F2 where I want it. I need copying the cells from the workbooks into row 2 in the master bookbook. Here is what I currently have:
Sub LoopThroughDirectory() Dim MyFile As String Dim erow MyFile = Dir("C:ToolFolderWorkObjectives")
I have created timesheets for employees that work in our shop. Our company manufactures products for different industries, such as mining, wind power generation, general industrial applications, and so forth. I modified some time sheet templates I found for excel to accommodate our company's actions. Each employee has their own workbook, in which the months are separated into different worksheets. Each sheet is divided further into weeks and in each weekly section the areas of information are divided as follows:
A / B / C / D / E / F / G / H / I / J / K / L / M Work Sector / Workshop or Fieldservice / Scope of Work / Job # / Reg or OT / Mon / Tue / Wed / Thu / Fri / Sat / Sun / Total
There are 7 workbooks (one for each employee), each with 12 sheets (one for each month). I want to create a master sheet that will pull information from everyone's timesheet if they worked on a particular job. In other words, I would like to type a job number into a cell, then have excel look through everyone's timesheets and pull over only the rows of information that contain that job number
VBA Macro to work through a worksheet that consist of static data (tab 4) cost centres and to populate a new work book per cost centre consisting of three tabs for every cost centre found in the static data.
The master Workbook has the following tabs:
Tab 1 is called travel and consist of column a which is the cost centre number (plus 14 other columns)
Tab 2 is called Mobile and consist of column a which is the cost centre number (plus 14 other columns)
Tab 3 is called Expenses. and consist of column a which is the cost centre number (plus 14 other columns)
Tab 4 Static Date column 1 cost centre number and consist of column 1 which is the cost centre number (plus 14 other columns).
If no information found on a specific cost centre, the tab will include the headers and return the words "No transactions for this period"
Whilst splitting data into Tabs the workbooks should check against the Static Data table and include cost center description in Column B of each tab in the new workbook.
If master workbook consist of the following....
Tab 1 is called travel and consist of column 1 which is the cost centre number (plus 14 other columns), cost centres, 555,557,
Tab 2 is called Mobile column 1 cost centre number and consist of column 1 which is the cost centre number (plus 14 other columns) cost centres, 555, 78689,
Tab 3 is called Expenses. column 1 cost centre number and consist of column 1 which is the cost centre number (plus 14 other columns), cost centres, 555,
tab 4 Static Date - column 1 cost centre number and consist of column 1 which is the cost centre number (plus 14 other columns). cost centres, 555, 557,78689
It should output 3 workbooks by cost centre number.
One for 555, which consists of 3 tabs, travel, mobile and expenses.
A second for 557 which has 3 tabs travel, mobile and expenses, but only with data in the travel tab.
A third for 78689 which has 3 tabs travel, mobile and expenses, but only with data for mobile data.
The workbooks will be replicates of the contents within the tabs where column a wil be the cost centre plus 14 additional columns.
I think this needs a For Each loop, but I am stuck on how to get it accompished. In the folder I will have about 26 workbooks with all different titles, but the beggining is always the same for the workbook and the worksheet (Bldg). There will be only one ws per wb and the wb I am using to collect all of the worksheets is Final.xls. The code attached works fine, but the only way right now I know how to capture the next wb/ws is with a call.
My task is to consolidate 4 Excel Project Lists (Workbooks) to a Master Workbook. The Project Lists has a different structure and almost different content. The relevant information is always on Sheet1 but it has completely different ranges. The only constant is the Project Number, which should be used to sort the information. Every Project should be listed only once with all the existing information.
I found a code written by Ron de Bruin which has already some components that I want to have in my VBA but I think there are still a lot of necessary adjustments to do.
Code: Sub MergeSelectedWorkbooks() Dim SummarySheet As Worksheet Dim FolderPath As String Dim SelectedFiles() As Variant Dim NRow As Long Dim FileName As String Dim NFile As Long Dim WorkBk As Workbook
[code]....
The Master Project List should has the headers in Row1 and the information listed below. The Macro should automatically places the correct information to the correct column. Some of the information are in 2 or more of the lists but they should be listed only once in the Master List.
Project Number
Project Description ... 1111E.000000001
[code]....
I guess a problem is that the structures of the Lists are quite different so there must be a kind of sorting process.
In the end I want to have an Excel File with the Macro and a Command Button and by clicking the Macro creates a new Workbook with the Master List.
It would be better if there is a variable range instead of a defined. Like the Macro searches the last row and starts at this row and column.
I have three source workbooks that needed to be consolidated into a master workbook pasting the data with values & formatting.
The Master workbook also contains 6 additional worksheets that link to the data pulled in from the source files. My question is how do I write the code so the source files populate the master in a specific order. For example, the 3 source files are named "Central" "NED" and "WEST" and I need them to populate the master workbook in that order.
This is the code I am using to consolidate the data:
Option Explicit Sub ConsolidateSheetsFromWorkbooks() 'Author: Jennifer Starr 'Date: 7/12/2013 'Summary: Open all files in a folder and merge data (stacked) on all
I came across the following code, which does exactly what i want. It opens up all workbooks in a specified folder, and consolidates these into one. Each worksheet data is added below that of the previous workbook.
[URL]....
I have changed this to suit my workbook which has the header rows starting in row 6, but is now giving an error due ot the copy area not being the same size as the past area. It appears to be copying columns A:M and trying to paste this into the main workbook in columns A:N.
I have same kind of file stored in a folder every day. For example an expense statement that is being pulled every day has sheet tabs Mon, Tue, Wed, Thu, Fri. Every day it gets stored in a particular folder. I need to consolidate for say 4 weeks. All sheet tabs look alike. I need to consolidate all mondays, all tuesday sheets ... in a master work book.
I have been working on this project for some time and still haven't got anywhere with it. What I am essentially trying to do is create a master summary workbook where by you press a button to activate a chunk of VBA that will grab the same range of data from multiple workbooks but also multiple sheets in those workbooks, only problem is the number of sheets in each workbook are constantly changing so I need first find some way of accessing a closed workbooks, then I need a way of looping through a segment of code that will look into approximately 10 workbooks all with a different number of sheets and taking a fixed range of cells out of each sheet and for every workbook make a new tab and paste the information in that tab then move onto the next workbook, find the number of tabs (missing out the first 3 tabs of every workbook) and copy and paste the fixed range from each tab onto a new tab the summary workbook. I will then have a summary workbook with a number of tabs, each one a different workbook with all the data from all the tabs in that workbook, I can then pull that information using formulas or some more VBA into a summary tab on the summary workbook, consolidating all of the information.
I was searching through the internet to look for some help with regards to consolidating data from multiple workbooks from different directories into a single worksheet called Summary.
I would like to copy the entire worksheet from different workbooks in different directories into this workbook I like to call Summary. To manually do it I have to open the workbook I want to copy the worksheet from. Right click on the tab and select Move or Copy, select the sheet I want to copy and select the workbook I want to copy this sheet to. Repeat this process for all the workbooks.
The next step is to copy and paste from these sheets into a main summary sheet. The data range from these sheets are starting from row 13 onwards and they may be of different size between Column A to Column W.
For example the workbooks are coming from :
S:Area 1West.xls from worksheet Andy S:Area 1East.xls from worksheet Bill S:Area 1North.xls from worksheet John S:Area 1North.xls from worksheet Albert etc...
I have multiple workbooks in a particular folder. Each workbook has only one worksheet named "Data". I need a VBA script that could open each file in the folder, copy only particular pre-defined cells that have been mentioned in the script, and then place it one below the other on a new sheet.
Ex, if the pre-defined cell is A2, C6, and D7. I want the code to open all the sheets in the folder one by one, copy A2, C6, and D7 of each workbook opened, and paste it one below the other on the new workbook that is running the macro.
As an add-on, it would also be great if the next column cud carry the file name of from which workbook the information was picked out.
The result thus in the new workbook wud be like...
A2's data | C6's data | D7's data | File Name Andrew Male Married march3.xls Peter Male Un-Married march4.xls Susan Female Divorced april2.xls
Is it a good idea to merge xls workbooks in to one master workbook?
I have read online that some say it is ok and nothing will happen and others say it isn't a good idea because macros and formulas will not work right once merge in to one workbook.
So I have many workbooks with 2 - 4 worksheets in them. All have formulas as well as macro's and everything is working fine just as it is. But I would like to have 1 Master workbook with all workbook/worksheets combined in to 1, so that I can stop opening so many workbooks.
I wish to be able to get data from several workbooks (.xls), and gather all the data in one master workbook.
As I said, I've got a number of workbooks with data I wish to copy and merge into one master worksheet. Each workbook contains a sheet called "MILESTONES" (project) in which I want to pick up data. The data ranges from A5:J88, but I think this can be expanded by the users (more rows). There is no guarantee that the users will enter data in all the columns. Columns A and B occur frequently blank, so the users usually starts entering in information in column C (heading = description).
The Master workbook contains of exactly the same headings, except that the columns has been expanded by 1. Column A1 has the heading "Workpack" which is the name of the workbook the information has been gathered from (description is in column D1). This name can be found in a sheet called "REPORT" in all of the workbooks, and I want this to be copied over, row by row so it matches the data. I don't know if it can cause any trouble, but the names are merged through C to J in row 12 in all of the workbooks.
The workbooks (or workpacks) and the master workbook (summary) are placed in the same folder. Let's say C:Project. The workbooks also changes names frequently (each month). Lastly, if there is a way to automatically update the master workbook every time it is opened.
I have 600+ variations of the same workbook. Contained within each workbook is a worksheet, from which I need to copy and paste a range of cells into one "master" workbook. For example, in workbook 1 I need to copy rows 2:5 and paste that into the master workbook in cells 2:5. Then I need to open workbook 2, copy rows 2:5 and paste them into the master workbook starting at row 6. I have fumbled my way through everything except the pasting part into the Master workbook.
I have a workbook that links out to numerous other workbooks for current data. After one of the supporting workbooks gets up dated, I return to the master workbook.
Here, I need to see the updated results. The only way that I can find a way of updating the master is to close and save it and then re-open.
Is there a way of updating the master workbook using a macro?
I have got a file with a lot of different workbooks
What i want to do, is open each one of them, copy a range of cells, for example E4:E15, then open the "master" workbook, look in row 4 which cell is empty and then paste the data there
i know how to copy-paste from one workbook to another, i am just not sure how to do it for more than one workbook.
