I have found an older thread that explains how to determine if a date falls in DST or not. See here Daylight Savings Time Funcitions. It does not follow the DST rules we use here in Canada and the formula is very confusing to me as it uses arrays, something I have yet to fully understand. DST in Canada begins the 2nd Sunday of March and ends on the 1st Sunday in November. I have a date in one column and a time in the next. What I would like to do is have a formula that checks to see if the date falls in DST and if so adds 1 hour to the second column. The result will show up in a third column.
How to create a formula to determine the longer period of time between two date calculations and enter the longer period of time in the cell.
My Spreadsheet: Cell M2: Birthdate (entered in cell as 11/1/2004) Cell J2: Last date of service (entered in cell as 10/31/2011) Cell G2: Calculation to enter the longer period of time between (M2 (year) + 21) and (J2 (year) + 7)
Example using information from above: 2004 + 21 = 2025 2011 + 7 = 2018 2025 is the result I want added to G2
If there is any way to include the month/year in G2 that would be ideal.
how many debits can take place in my Savings Account if I provide the Current Balance and the No of Debits,Amount of Debits,Frequency of Each Debit.
Lets say, I have Rs 42978/- in my savings account at this moment and I have 2 different Debits taking place on different dates of the Month.
First Debit of Rs 750/- (12th of Month)
Second Debit of Rs 584/- ( 27th of Month)
I am also planning to add one more debit EMI (Equated Onthly Installments)for Rs 1127/- every month.
I need to know the No of Months I can go without paying my Savings Account as well as the Month and the year.
I have tried doing it the regular way but it becomes quite cumbersome, I am looking for help in terms of a better design or a Template as some single-cell (hopefully) formula which can incorporate the number of Debits,Amounts etc.
One very important thing is to also keep a track of the Balance not going below an "X" amount and that is Rs 1500/- as thats the Bank's Minimum Balance requirement..
The no of Installments are as mentioned below: Debit--- Amount--- Start Month--- No of Installments
I Debit--- 750--- Jan-09--- 36 II Debit--- 584--- Feb-09--- 27 III Debit--- 1127--- Mar-09--- 60
I am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize() If Not Range("dDate").Value = "" Then TextBox2.Value = Range("dDate").Value TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM") Else TextBox2.Value = "" TextBox2.SetFocus End If End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
I am trying to create a spreadsheet to determine hrs per time interval
i.e 06:00 - 14:00 14:00 - 22:00 22:00 - 06:00
So a start time of 06:00 and finish time of 14:00 would show 8hrs in first interval and 0 in the other 2 and a start time of 10:00 and a finish time of 18:00 would show 4hrs in first interval and 6 in second and 0 in last
I've currently got start time in A1 , finish time in B1 and want hours for interval 1 in D1 , interval 2 in E1 and interval 3 in F1.
I'm trying to sort column G for any "Approved" or "Denied" outcomes then find the time difference between columns E and F then divide that difference by the number of approved or denied in column G. I've tried a number of combinations of SUMIFS, IFS, COUNTIFS, and Ave formulas but can't come up with one that works. Here's an example of what I'm trying to do:
Sum E-F if G= "Approved" or "Denied" / the number of "Approved" or "Denied" outc
I am trying to determine a formula to know a period time for example i started to test a unit at 10:20 am of 10/02/2011 and i would like to add 52 hours of test and i would like to know when and at what time will finish the test?
I'm trying to calculate when a waiting time falls outside and exceptable time period. This is based on two colums of data. The first column contains a number from 1 to 5 and the second a time period. (see attached example) in column "C" I need a formula that looks at the value in "A" and if it equals (1) and the time period in "B" is > 00:02 it should show "EXCEEDED". If "A" does contain a (1) then the code stops otherwise it does another loop of "A" looking for a (2) and a time in "B" of >00:10 etc.
I have loaded a .csv file in which the first column contains date/times, e.g. 01/12/2012 00:00. How do I now tell Excel (2010) that this is in fact a date/time format? If I select one or more of the cells, click on the Number dialog box launcher and try to pick a suitable format tghe cells resolutely refuse to budge from being text (i.e. left-justified, still allows me to edit the 'seconds' component to a number > 60). Also which data type should I be using? The only one that appears to have a full date/time format listed is Custom (not Date or Time).
I need to calculate the final balance of a savings account. Thought this could be done using the function FV. However I had not used this function before. Therefore to make sure that I had set up the formula correctly I checked it manually with a small example. The results are set out below. You will see the function FV fails to include the final interest payment. (£2620.32 - £2472.00 =£148.32)
The data to be used will be: A regular payment of an identical amount on first day of every year. Compound interest calculated annually and credited to account on final day of every year. Period of years.
Example of Saving Regular Amount every year at Compound Interest Using =FV(A1,A2,A3)
Amount of Saving per annum £1,200.00 A1 Rate per Annum 6.00% A2 Period of Years 2.00 A3 £2,472.00
Manual calculation of example:
Payment at start of first year£1200.00 Interest at end of first year 72.00 Balance at end of first year 1272.00 Payment at start of second year £1200.00 Balance at start of second year 2472.00 Interest at end of second year 148.32 Balance at end of second year £2620.32
I'm attempting to build a Mortgage payment calculator which calculates interest semi-annually. The goal of the calculator is to determine how much interest you would save if your payments were set to Accelerated Bi-weekly, and Accerlerated Weekly vs. Monthly.
I've already calculated what the payments would be for each payment type, however I'm not able to determine what the interest savings would be.
I import data from a program that exports dates and times as text. I have been successful using "text to columns" to separate the time from the date and then using =text(A1,"00:00")+0 to get the time to show as serial time but I'd love to be able to do the whole date/time string in one step. In cell A1 there is data that is general format and is in this format:
01/01/13 00001
No matter how you try to format it, it is not a date or time. For this project I need the serial number for the date/time. Any formula that will format it as date/time and then allow it to show as a serial date/time?
I have 04/02/08 12:00:01 AM (mm/dd/yy hh:mm:ss AM/PM) in text format in a cell. I need to convert this to date/time custom format as given above so that I can make comparisons with NOW() output.
I have a pivot table for which I load data from a .csv file. Is it possible to include a timestamp on when the .csv file was last loaded. If I do it above the actual pivot table, it just shows when the pivot table was refreshed, but not when the .csv file was last loaded.
The code is ok until I hit a month with 4weeks in it and days left over. The code puts a week total in place of a Sunday, but as some months end before a Sunday appears the code just builds a Month end total sheet.
What I need in this case is a Week total even if there is no Sunday before it builds the Month end Total.
I hope i'm being clear
Sub NewSheets() Dim Dte As Date, Dy As Date Dim i As Long, j As Long, Dys As Long Dim CountWeek As Boolean Dim Shts As Long...
I have got a spreadsheet that needs filling in by 3pm everyday. The workbook has a worksheet for each day e.g. Mon to Fri. What I am looking to do is fill the worksheets in for whatever day it is e.g. if it is monday then select monday data from required file and paste into monday worksheet. I was going to create five macros for each day and then select the required one on the day, but rather than doing this is their a way that i could write one macro that runs by checking what day it is? e.g. if monday run monday code...
I have a formula that tries to determine if a date is between two dates. The formula I have is =IF(AND(A1>=A2,A1<=A3),"yes","no")
a1 = 7/31/2009 a2 = 8/1/2008 a3 = 3/31/2010
If the date is between those two dates then "yes", if not then "no". I tried this formula a couple times and it works when a3 is 3/31/2010 but when I try 3/31/2009 for example it does not work. So it seems like there is something wrong with the second date I am referencing.
I am using Excel 2013. Anyway, the first issue is that I need to pull a date and a time period from text. So, for example, if I see something like Sunday Prime Time 7/6/14 8:37PM, I would want to pull ONLY the "7/6/14 8:37PM" out of it. Each text box could potentially be different, so it might not always be in the same format as "Sunday Prime Time 7/6/14 8:37PM" it might only show just the date and/or the time without all the extra text i.e. 7/6/14 8:37PM. Some of the cells will have text, others might only have just the time or even just the date and the time. The only thing that I am worrying about in each cell is extracting just the date and time. If this is too much to ask of excel, I would be ok with extracting ONLY the time - 8:37PM and not the date, but I would much rather be able to get both the time and date.
THEN, onto part two of my question. After I would pull the dates and times, I need to compare them with each other. So, when I have the same date with two separate times on that date, I need to write a formula to show if those times on that date are less than 30 minutes apart. So, if I have 6 times on 7/6/14, I need to know if any of them are less than 30 minutes apart.
I would need to have the formula say something like "Problem" if the times on 7/6/14 would be 5:30PM, 5:48PM, 7:00PM, 8:00PM, 8:15PM, and 9:00Pm for example. I would like to see the word "Problem" since 5:30PM and 5:48Pm is only 18 minutes apart, and "Problem" after 8:15PM since that is only 15 minutes past the 8:00PM which is obviously under 30 minutes. The times that are more than 30 minutes apart such as 7:00PM and 9:00PM for example are more than 30 minutes apart from any of the other times that were extracted.
I am trying to determine if a specific date is what week in a 4-4-5 accounting month. See attached file. Is there a formula that can be used to do this???
I'm trying to write a batch file that connects to a database and passes in an SQL query. One of the conditions of this query is the date. I need the batch file to figure out what todays date is and pass that in.
This is what I currently have.
ws_tran_date between to_date( '&datefrom 08:30:00AM', 'DD-MON-YYYY HH:MI:SS AM') and TO_DATE('&dateto 08:30:00am', 'DD-MON-YYYY HH:MI:SS AM')
When I run the batch file, it asks me to input the dates manaully in the format DD-MON-YYYY (eg 7-NOV-2006). I need the batch file to figure this out on it's own.
I am attempting to create a template to input specific dates. If a student submits an assignment on the due date, I have set up the spreadsheet to conditionally format whether the assignment was late or not. In addition, I have a column for when feedback is to be submitted and whether it was on time or not. My problem is this...
I cannot figure out a formula or a way to determine: If the student submits the assignment late, when will the feedback be due? For example, if submitted one day late, the instructor has an extra day to submit feedback.Two days late is an extra two days to work on it etc..
I am looking for a macro that will run on worksheet activation. it needs to run only if the file had been saved from the previous week. would something like this work?
Private Sub Worksheet_Activate() If application.worksheet.lastsaved = msolastweek Then range("RANGE").clearcontents End If End Sub