I have a spreasheet with one locked collum that I don't want to be edited. Is there any way of filtering while this collum is locked? It seems to be that once it locks the collum it also locks the filters?
View 6 Replies
how to create two buttons so that I can have a data entry specific protection and then a lock all button. Here's the link to the thread:
http://www.excelforum.com/excel-prog...-a-button.html
And here's the code I'm currently using:
I recently launched a model that uses filtering on protected worksheets. The model was developed in Excel 2000, and everything works perfectly for the users who are also on 2000, but my Excel 2003 users get an error on opening the workbook.
The error asks for the password to unlock the sheet and is difficult to clear. Users have to hit Cancel 8 times to clear the error, at which point, the model appears to function perfectly. (There are 12 worksheets in the model, 2 with filters, all locked and password protected.)
The follwoing code is in the 'ThisWorkbook' module:
Private Sub Workbook_Open()
With Worksheets("Initiatives")
.Protect DrawingObjects:=True, contents:=True, userInterfaceOnly:=True
.EnableAutoFilter = True
.Protect contents:=True, userInterfaceOnly:=True
End With
Because the error occurs when first opening the model but not at other times, I'm thinking that there's something in the Workbook_Open procedure that is causing the error.
I have a formatted budget vs actual income statement that has subtotals in the appropriate spots. I would like to be able to paste over the entire column with updated data, but not write over the formulas. For instance, in one spreadsheet I have the data for the month of June and in another I have the data for the month of July. Both have the same number of rows, but are formatted slightly differently. I want to be able to replace the June data with the July data. My first thought was to lock the cells with the formulas, protect the sheet and then paste over the entire column, but I get the following error:
The cell or chart that you are trying to change is protected and therefore read-only.
To modify a protected cell or chart, first remove protection using the Unprotect Sheet command (Review tab, Changes group). You may be prompted for a password)
Is there a way to filter column A but ensure it includes multiple lines of data in a different column.
I have attached an example of what I am looking for:
I need to filter by community but keep all the information listed in columns, B, C, & D.
So when I filter to Thunder Bay I would still see the 5 members listed in column D.
I realize the easy solution is to fill all the empty cells in column A to pick up the data in the other columns, but I do not want to Fill all the empty cells to include the name "Thunder Bay" (not the look I want for this spreadsheet).
How to filter certain row when column contain certain value using vba? i try to manually add in filter using Excel, but it doesn't works, how to write vba code to filter out rows of which some of its columns contain certain value?
View 5 Replies View RelatedI have set of data(attached example file) in which i have to categorize the data depending on the LOC (column C) which is below 1000,between 1000-3000 and greater than 3000.
Once i have filtered data i need to get the counts for each impacts.
I have put the sample output in next tab(sheet 2)
I am trying to macro a filter for column C & D to hide rows that contain blank values in BOTH columns.
In other words..keep row if value in column C OR D OR BOTH.
Original Data Set;
table.tableizer-table {border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif; font-size: 12px;} .tableizer-table td {padding: 4px; margin: 3px; border: 1px solid #ccc;}
.tableizer-table th {background-color: #104E8B; color: #FFF; font-weight: bold;}
ABCDE 1WH4_BL_STKTRUE 1 2JBS_BL_STKTRUE 1 3Total [Mill]TRUE10001,7001 4Total [Waste]TRUE50000 1 5Total [Stockpile]TRUE 1 6Total [Mill+Waste]TRUE 15,0001 7RPG4_CR_DST {WH4}TRUE 2 8CR_DST {WH4}TRUE 2 9JB_CR_DST {WH4}TRUE 2 10RPG4_CR_DST {WH123}TRUE 2
Desired Filtered Data;
table.tableizer-table {border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif; font-size: 12px;} .tableizer-table td {padding: 4px; margin: 3px; border: 1px solid #ccc;}
.tableizer-table th {background-color: #104E8B; color: #FFF; font-weight: bold;}
ABCDE 3Total [Mill]TRUE10001,7001 4Total [Waste]TRUE50000 1 6Total [Mill+Waste]TRUE 15,0001
Filter Even The Coloumn No Changes
how to Filter Even When Coloumn No Changes
i have a macro to filter various coloumns on various criteria assuming the headings are same everyday.
But my parent co employee sometimes changes the heading order('exceed' heading changed like 'u' clumn to 'v')
how to cope with this in macro/VBA
I am using the following code to filter one in one column.
View 8 Replies View RelatedI have been trying to filter a column from the value entered in to a cell and hide all rows not matching.
I would like to have a macro button that will look at cell C2 and then filter column E from cell E5 down to the end of the sheet since the row count will change often. I have attached the sheet I'm working with.
So I enter HCLU into C2 hit the filter button and all rows with HCLU in the E column stay visible and all not matching HCLU become hidden or deleted.
I've managed to use the following VBA to filter a sheet based on the value of cell B1:
Private Sub Worksheet_Change(ByVal Target As Range)
If (Intersect(Target, Range("B1")) Is Nothing) _
Then
Exit Sub
End If
Cells.AutoFilter Field:=1, Criteria1:="=" & Range("B1")
Range("B1").Select
End Sub
I have tried to use this for a different sheet with "fixed head data" that needs to stay at the top of the page (range B1:K7), for printing purposes.
How to modify the above code to filter column A (from row 8 downwards) depending on what's entered in the cell A1.
Also - if possible, "if A1 is empty - display all rows".
I would like to determine using VBA which Column or Range-of-Columns have a filter applied.
I need to change filters, depending what part of the sheet the user is looking at.
Not sue why, but in my IE browser, I cannot Paste code anymore .
Code:
i have attached a book with a column of data in it.
This column can change from month to month, i.e. it can contain more or less data.
I need to filter the column "Prog Provider" for "SIN" and copy all of the data to a new sheet.
This is a tiny sample as this usually contains over 25000 lines and I need to grab everything in col G related to SIN.
I attempted to record a macro, but as different data was put in it missed parts out!
I have a question regarding filtering of columns. I have set up Excel 2007 so that I can click on the drop-down menu in each column to filter them.
However, in my data set there is one blank row separating two set of rows. Now, when I apply the filter on a column, all the rows above the blank row filter correctly, but all the rows below stay un-filtered.
I guess Excel only looks at the consecutive rows, then stops when it hits a blank row. Is there any way of applying the filter beyond a blank row (i.e. the whole column)?
I have a column named length and values are in different units ie few values in mm, few in cm, few in m. i have to filter out columns having range from 9mm to 6cm. How to do this task.(10mm = 1cm and 100cm = 1m)
Consider sample data as:
4 m
8 cm
9 m
3 mm
9 mm
6 m
6 cm
3 cm
2 m
how to filter by the year only in a column where I have dates specified as dd/mm/year.
This is being done through VBA and I tried the following (relevant code posted), but it doesn't seem to be working:
[Code].....
How can i filter a column to show me all the cells containing the word "on" when i try to filter i still get results like canyon or ontario etc which i dont need.
View 7 Replies View RelatedI need a little macro that will filter for the lowest value in a column
View 5 Replies View RelatedI have 2 date values in excel spreadsheet ( i must use it by the sheet) and i want to flter table by the date column and AutoFilter, when the start date and the end date will be taken from the sheet itself.
but when i defined date variable like starta and edit the filter (Criteria1:=">=starta") it didt work (the value was starta and not the date in the starta) how to edit it?
sub abcd
Dim starta As Date, enda As Date
starta = Worksheets("periods and options").Range("a1").Value
enda = Worksheets("periods and options").Range("b1").Value
Sheets("DATAF").Range("a1:p1325").Select
Selection.AutoFilter Field:=1, Criteria1:=">=starta", Operator:=xlAnd _
, Criteria2:="
I have a database that includes a column containing dates which include a decimal time value e.g 2013/07/31 16:14
VBA that will allow me to filter to the records where the time element of the date is between two values e.g. between 12:00 midday and 17:59.
There will be many thousands of records covering a wide time period, so the code needs to ignore the date part and just concentrate on the time.
Probably dead easy but it's 17:04 and I have brainfreeze.
I am trying to use a combo box with a defined list I have in another worksheet.
I was able to name and populate the list into the combo box, but am trying to work a macro into it.
I have a large data sheet with with many columns. In this worksheet, I also placed the combo box. What I would like to do is to be able to click on a name in the combo box and have it filter Column H, where there are many data points.
For example, In column H I have Apples, Watermelons, Peaches, etc.
In the combo box list, I would like to click on Apples and Column H list only the Apple names. Then if I want to click on Watermelons, it would filter Column H to only those which have Watermelons listed...
I'm applying a filter in a sheet that's something like this, after applying the filter it looks like this (Example Item 999)
Item
Inv. Qty
Avi. Qty
Flag
BOX
999
12
9
N
X1
[code]...
I was trying to get the "Flag" Column value, (inside the filter and it crashed)
Code:
With InventorySheet
.AutoFilterMode = False
LRowOnQ = .Cells(Rows.Count, "Q").End(xlUp).Row
.Range("B1").AutoFilter Field:=2, Criteria1:=Project
.Range("D1").AutoFilter Field:=4, Criteria1:=ContractNumber
.Range("N1").AutoFilter Field:=14, Criteria1:=Code
.Range("Q1").AutoFilter Field:=17, Criteria1:=">0"
Set rangeFilteredInventory = .Range("Q1:Q" & LRowOnQ)
ControlFlag = .Range("L2").Value
End With
After the filter, it always take the same value.
Code:
With InventorySheet
.AutoFilterMode = False
LRowOnQ = .Cells(Rows.Count, "Q").End(xlUp).Row
.Range("B1").AutoFilter Field:=2, Criteria1:=Project
.Range("D1").AutoFilter Field:=4, Criteria1:=ContractNumber
.Range("N1").AutoFilter Field:=14, Criteria1:=Code
.Range("Q1").AutoFilter Field:=17, Criteria1:=">0"
Set rangeFilteredInventory = .Range("Q1:Q" & LRowOnQ)
End With
ControlFlag = InventorySheet.Range("L2").Value
Is there any way to take the most common letter of the result range?
I'm aware there's a average option in subtotal, but I think it's just for numbers.
Code:
With InventorySheet
.AutoFilterMode = False
LRowOnQ = .Cells(Rows.Count, "Q").End(xlUp).Row
.Range("B1").AutoFilter Field:=2, Criteria1:=Project
.Range("D1").AutoFilter Field:=4, Criteria1:=ContractNumber
.Range("N1").AutoFilter Field:=14, Criteria1:=Code
.Range("Q1").AutoFilter Field:=17, Criteria1:=">0"
[code]...
And it doesn't even do the loop.
I have written some code that will allow me to filter and delete any rows where there is a value in a column ( column J in this instance ) more than 2500. The problem is that it only wolrs when i press F8 and step through the code, and not when i press the commnd button and run it.
Sheets("CAIZOLY9").Select
Range("A1").Select
Do Until ActiveCell = "Payment Amount"
ActiveCell.Offset(0, 1).Select
ActiveCell.Select
Loop
Do Until ActiveCell.Value = ""
ActiveCell.Offset(1, 0).Select
If ActiveCell > 2499.99 Then
Selection.EntireRow.Delete
Else
End If
Loop
Range("A1").Select
End Sub
I currently use this filter to display rows with exact values as shown in this example:
Sub New_SheetUnpaidInvoices()
Application.DisplayAlerts = True
Worksheets("Closed Yr. 07").Activate
Columns("S:S").Select
Selection.AutoFilter
ActiveSheet. Range("$S$1:$S$1127").AutoFilter Field:=1, Criteria1:= Array( _
"BOB JONES", "JIMMY SMITH", "SUSAN LEE", "JONES SMITH LEE"), Operator:=xlFilterValues
End Sub
Sometimes, however, the worksheet cells contain simply combinations of last names like "JONES SMITH LEE" or other combinations. And, the last names appear in random order. So, I'd like to able to filter all rows that contain portions of the string without having to worry about the order and the exact string, etc. If the autofilter can return rows anytime it finds Jones, Smith or Lee regardless of order, that's be great.
I'm trying to use the advance filter for multiple criteria in one column. It works fine if the criteria is ="*10*" (ie where the cell in the range has 10 in the string) plus other = criteria. What I cannot get to work is where the range doesn't equal 10 in the string. I've tried ="<>*10*" and other variations to no joy.
View 4 Replies View RelatedI'm trying to make a column to use as a filter for mail merging. The filter is based on a result entered into one column which is compared with a range of values in an adjacent column. I managed to get the nested IF formula to work but only when entered into a blank spread sheet or if I correct the error as prompted. I've attached an example of the spreadsheet.
View 2 Replies View RelatedI have a database (ATTACHED) which contain name, roll number, courses taken etc. I want to create different file for different courses showing the roll number and name of the student who have written their name as REGISTER in the course.
View 3 Replies View RelatedI have columns on Sheet 1 with a filters and I want a way to make a list on Sheet 2 of each item (with out repeating) that is in the corresponding column on sheet 1.
This will be programmed in a userform to create the list when the form is loaded.
The end result being this: CopyFilterList.png
This is an example and there could be up to 50 or more options.
i try to create vba code, which will filter blankc cell in column where is cursor. this is my try, but it doesnt works.
View 4 Replies View Related
