Filter Column From Cell Value
Oct 16, 2009
I have been trying to filter a column from the value entered in to a cell and hide all rows not matching.
I would like to have a macro button that will look at cell C2 and then filter column E from cell E5 down to the end of the sheet since the row count will change often. I have attached the sheet I'm working with.
So I enter HCLU into C2 hit the filter button and all rows with HCLU in the E column stay visible and all not matching HCLU become hidden or deleted.
View 6 Replies
ADVERTISEMENT
Apr 23, 2013
conditional Macro or filter? Easy to record a Macro which filters, but choosing what (column) to filter based on values of a cell I'm not sure how to go about that. It means implementing IFs into a Macro, or..?
Data on "Staff List" sheet I have a list with all staff details including availability. I need to filter their availabiltiy and copy values over to another sheet. The availabiltiy shows Monday to Sunday and states for which of our offices they are are available. Here the columns BS to BY
Available Location Monday
Available Location Tuesday
Available Location Wednesday
[Code]....
Now I need the Macro to choose which column to filter based on the office set in cell C3 on the "Availability" sheet. And then filter that column for YES.
View 9 Replies
View Related
Jun 28, 2014
I want a macro which can filter the data on the basis of active cell
View 1 Replies
View Related
Feb 25, 2014
I work on an excel spreadsheet all day and I'm constantly cuting and pasting a value to filter another column. I would love to have a macro button that would automatically do this.
The job card sheets are labled 'Page 1' through to 'Page 175'. As I am working on each job card sheet I need to filter column on another sheet within the same workbook. This is indicated on the attached picture.
So in a perfect world as I would enter in the PLANT ID number on to any job card, then hit a macro button on the toolbar and the Pole No column would then be filtered by the value in the PLANT ID cell.
As there are multiple job cards the macro would probably need to use the 'active cell' value to filter by. But as you can probably tell I'm no expert so you judge the best way to do it.
MWTS034G22 Job Card Sheet
[URL] .....
Windows 7 (32bit)
MS EXCEL 2010
View 2 Replies
View Related
Jun 23, 2006
I've have and autofilter in the heading of a column that allows me filter on All, NonBlanks, Blanks, Cell Entries, Etc.....But for some reason when I filter on all a number of rows are hidden or the row height is set to 0 and I can't view the cells unless I change the row height.
View 2 Replies
View Related
Sep 23, 2006
I have many sheets which I am using the advanced filter to filter the data to a single summary sheet. Everthing works great with one exception. I have cell comments added with relevent info to to cell values. When the advanced filter is performed the cell comments are not transfered to the summary sheet with the cell values. Is there a method to filter the data to another sheet and keep the comments?
View 5 Replies
View Related
Mar 31, 2014
Is there a way to filter column A but ensure it includes multiple lines of data in a different column.
I have attached an example of what I am looking for:
I need to filter by community but keep all the information listed in columns, B, C, & D.
So when I filter to Thunder Bay I would still see the 5 members listed in column D.
I realize the easy solution is to fill all the empty cells in column A to pick up the data in the other columns, but I do not want to Fill all the empty cells to include the name "Thunder Bay" (not the look I want for this spreadsheet).
View 2 Replies
View Related
Aug 7, 2010
How to filter certain row when column contain certain value using vba? i try to manually add in filter using Excel, but it doesn't works, how to write vba code to filter out rows of which some of its columns contain certain value?
View 5 Replies
View Related
Oct 13, 2009
I have set of data(attached example file) in which i have to categorize the data depending on the LOC (column C) which is below 1000,between 1000-3000 and greater than 3000.
Once i have filtered data i need to get the counts for each impacts.
I have put the sample output in next tab(sheet 2)
View 6 Replies
View Related
Oct 9, 2012
I am trying to macro a filter for column C & D to hide rows that contain blank values in BOTH columns.
In other words..keep row if value in column C OR D OR BOTH.
Original Data Set;
table.tableizer-table {border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif; font-size: 12px;} .tableizer-table td {padding: 4px; margin: 3px; border: 1px solid #ccc;}
.tableizer-table th {background-color: #104E8B; color: #FFF; font-weight: bold;}
ABCDE 1WH4_BL_STKTRUE 1 2JBS_BL_STKTRUE 1 3Total [Mill]TRUE10001,7001 4Total [Waste]TRUE50000 1 5Total [Stockpile]TRUE 1 6Total [Mill+Waste]TRUE 15,0001 7RPG4_CR_DST {WH4}TRUE 2 8CR_DST {WH4}TRUE 2 9JB_CR_DST {WH4}TRUE 2 10RPG4_CR_DST {WH123}TRUE 2
Desired Filtered Data;
table.tableizer-table {border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif; font-size: 12px;} .tableizer-table td {padding: 4px; margin: 3px; border: 1px solid #ccc;}
.tableizer-table th {background-color: #104E8B; color: #FFF; font-weight: bold;}
ABCDE 3Total [Mill]TRUE10001,7001 4Total [Waste]TRUE50000 1 6Total [Mill+Waste]TRUE 15,0001
View 4 Replies
View Related
Sep 20, 2006
Filter Even The Coloumn No Changes
how to Filter Even When Coloumn No Changes
i have a macro to filter various coloumns on various criteria assuming the headings are same everyday.
But my parent co employee sometimes changes the heading order('exceed' heading changed like 'u' clumn to 'v')
how to cope with this in macro/VBA
View 3 Replies
View Related
Jul 30, 2014
I have a spreasheet with one locked collum that I don't want to be edited. Is there any way of filtering while this collum is locked? It seems to be that once it locks the collum it also locks the filters?
View 6 Replies
View Related
Feb 14, 2009
I am using the following code to filter one in one column.
View 8 Replies
View Related
Feb 19, 2013
I've managed to use the following VBA to filter a sheet based on the value of cell B1:
Private Sub Worksheet_Change(ByVal Target As Range)
If (Intersect(Target, Range("B1")) Is Nothing) _
Then
Exit Sub
End If
Cells.AutoFilter Field:=1, Criteria1:="=" & Range("B1")
Range("B1").Select
End Sub
I have tried to use this for a different sheet with "fixed head data" that needs to stay at the top of the page (range B1:K7), for printing purposes.
How to modify the above code to filter column A (from row 8 downwards) depending on what's entered in the cell A1.
Also - if possible, "if A1 is empty - display all rows".
View 3 Replies
View Related
Jan 30, 2014
I would like to determine using VBA which Column or Range-of-Columns have a filter applied.
I need to change filters, depending what part of the sheet the user is looking at.
Not sue why, but in my IE browser, I cannot Paste code anymore .
Code:
View 4 Replies
View Related
Jul 24, 2012
i have attached a book with a column of data in it.
This column can change from month to month, i.e. it can contain more or less data.
I need to filter the column "Prog Provider" for "SIN" and copy all of the data to a new sheet.
This is a tiny sample as this usually contains over 25000 lines and I need to grab everything in col G related to SIN.
I attempted to record a macro, but as different data was put in it missed parts out!
View 4 Replies
View Related
Feb 24, 2011
I have a question regarding filtering of columns. I have set up Excel 2007 so that I can click on the drop-down menu in each column to filter them.
However, in my data set there is one blank row separating two set of rows. Now, when I apply the filter on a column, all the rows above the blank row filter correctly, but all the rows below stay un-filtered.
I guess Excel only looks at the consecutive rows, then stops when it hits a blank row. Is there any way of applying the filter beyond a blank row (i.e. the whole column)?
View 4 Replies
View Related
Dec 4, 2012
I have a column named length and values are in different units ie few values in mm, few in cm, few in m. i have to filter out columns having range from 9mm to 6cm. How to do this task.(10mm = 1cm and 100cm = 1m)
Consider sample data as:
4 m
8 cm
9 m
3 mm
9 mm
6 m
6 cm
3 cm
2 m
View 6 Replies
View Related
May 15, 2013
how to filter by the year only in a column where I have dates specified as dd/mm/year.
This is being done through VBA and I tried the following (relevant code posted), but it doesn't seem to be working:
[Code].....
View 2 Replies
View Related
Jun 20, 2013
How can i filter a column to show me all the cells containing the word "on" when i try to filter i still get results like canyon or ontario etc which i dont need.
View 7 Replies
View Related
Oct 6, 2011
I need a little macro that will filter for the lowest value in a column
View 5 Replies
View Related
May 1, 2012
I have 2 date values in excel spreadsheet ( i must use it by the sheet) and i want to flter table by the date column and AutoFilter, when the start date and the end date will be taken from the sheet itself.
but when i defined date variable like starta and edit the filter (Criteria1:=">=starta") it didt work (the value was starta and not the date in the starta) how to edit it?
sub abcd
Dim starta As Date, enda As Date
starta = Worksheets("periods and options").Range("a1").Value
enda = Worksheets("periods and options").Range("b1").Value
Sheets("DATAF").Range("a1:p1325").Select
Selection.AutoFilter Field:=1, Criteria1:=">=starta", Operator:=xlAnd _
, Criteria2:="
View 1 Replies
View Related
Jul 24, 2013
I have a database that includes a column containing dates which include a decimal time value e.g 2013/07/31 16:14
VBA that will allow me to filter to the records where the time element of the date is between two values e.g. between 12:00 midday and 17:59.
There will be many thousands of records covering a wide time period, so the code needs to ignore the date part and just concentrate on the time.
Probably dead easy but it's 17:04 and I have brainfreeze.
View 3 Replies
View Related
Aug 1, 2013
I am trying to use a combo box with a defined list I have in another worksheet.
I was able to name and populate the list into the combo box, but am trying to work a macro into it.
I have a large data sheet with with many columns. In this worksheet, I also placed the combo box. What I would like to do is to be able to click on a name in the combo box and have it filter Column H, where there are many data points.
For example, In column H I have Apples, Watermelons, Peaches, etc.
In the combo box list, I would like to click on Apples and Column H list only the Apple names. Then if I want to click on Watermelons, it would filter Column H to only those which have Watermelons listed...
View 1 Replies
View Related
Nov 1, 2013
I'm applying a filter in a sheet that's something like this, after applying the filter it looks like this (Example Item 999)
Item
Inv. Qty
Avi. Qty
Flag
BOX
999
12
9
N
X1
[code]...
I was trying to get the "Flag" Column value, (inside the filter and it crashed)
Code:
With InventorySheet
.AutoFilterMode = False
LRowOnQ = .Cells(Rows.Count, "Q").End(xlUp).Row
.Range("B1").AutoFilter Field:=2, Criteria1:=Project
.Range("D1").AutoFilter Field:=4, Criteria1:=ContractNumber
.Range("N1").AutoFilter Field:=14, Criteria1:=Code
.Range("Q1").AutoFilter Field:=17, Criteria1:=">0"
Set rangeFilteredInventory = .Range("Q1:Q" & LRowOnQ)
ControlFlag = .Range("L2").Value
End With
After the filter, it always take the same value.
Code:
With InventorySheet
.AutoFilterMode = False
LRowOnQ = .Cells(Rows.Count, "Q").End(xlUp).Row
.Range("B1").AutoFilter Field:=2, Criteria1:=Project
.Range("D1").AutoFilter Field:=4, Criteria1:=ContractNumber
.Range("N1").AutoFilter Field:=14, Criteria1:=Code
.Range("Q1").AutoFilter Field:=17, Criteria1:=">0"
Set rangeFilteredInventory = .Range("Q1:Q" & LRowOnQ)
End With
ControlFlag = InventorySheet.Range("L2").Value
Is there any way to take the most common letter of the result range?
I'm aware there's a average option in subtotal, but I think it's just for numbers.
Code:
With InventorySheet
.AutoFilterMode = False
LRowOnQ = .Cells(Rows.Count, "Q").End(xlUp).Row
.Range("B1").AutoFilter Field:=2, Criteria1:=Project
.Range("D1").AutoFilter Field:=4, Criteria1:=ContractNumber
.Range("N1").AutoFilter Field:=14, Criteria1:=Code
.Range("Q1").AutoFilter Field:=17, Criteria1:=">0"
[code]...
And it doesn't even do the loop.
View 1 Replies
View Related
May 5, 2006
I have written some code that will allow me to filter and delete any rows where there is a value in a column ( column J in this instance ) more than 2500. The problem is that it only wolrs when i press F8 and step through the code, and not when i press the commnd button and run it.
Sheets("CAIZOLY9").Select
Range("A1").Select
Do Until ActiveCell = "Payment Amount"
ActiveCell.Offset(0, 1).Select
ActiveCell.Select
Loop
Do Until ActiveCell.Value = ""
ActiveCell.Offset(1, 0).Select
If ActiveCell > 2499.99 Then
Selection.EntireRow.Delete
Else
End If
Loop
Range("A1").Select
End Sub
View 7 Replies
View Related
Sep 25, 2007
I currently use this filter to display rows with exact values as shown in this example:
Sub New_SheetUnpaidInvoices()
Application.DisplayAlerts = True
Worksheets("Closed Yr. 07").Activate
Columns("S:S").Select
Selection.AutoFilter
ActiveSheet. Range("$S$1:$S$1127").AutoFilter Field:=1, Criteria1:= Array( _
"BOB JONES", "JIMMY SMITH", "SUSAN LEE", "JONES SMITH LEE"), Operator:=xlFilterValues
End Sub
Sometimes, however, the worksheet cells contain simply combinations of last names like "JONES SMITH LEE" or other combinations. And, the last names appear in random order. So, I'd like to able to filter all rows that contain portions of the string without having to worry about the order and the exact string, etc. If the autofilter can return rows anytime it finds Jones, Smith or Lee regardless of order, that's be great.
View 7 Replies
View Related
Sep 25, 2008
I'm trying to use the advance filter for multiple criteria in one column. It works fine if the criteria is ="*10*" (ie where the cell in the range has 10 in the string) plus other = criteria. What I cannot get to work is where the range doesn't equal 10 in the string. I've tried ="<>*10*" and other variations to no joy.
View 4 Replies
View Related
Jun 14, 2009
I'm trying to make a column to use as a filter for mail merging. The filter is based on a result entered into one column which is compared with a range of values in an adjacent column. I managed to get the nested IF formula to work but only when entered into a blank spread sheet or if I correct the error as prompted. I've attached an example of the spreadsheet.
View 2 Replies
View Related
Jan 5, 2013
I have a database (ATTACHED) which contain name, roll number, courses taken etc. I want to create different file for different courses showing the roll number and name of the student who have written their name as REGISTER in the course.
View 3 Replies
View Related
