Code To Filter One In One Column
Feb 14, 2009I am using the following code to filter one in one column.
View 8 Replies
ADVERTISEMENT
Advanced Filter Code - Criteria Range More Than 1 Row Breaks Filter
May 1, 2014I found a great bit of Advanced Filter code that works great, and fixed a problem of clearing a cell breaking the filter.
But if I want to increase the criteria from 1 row to 2, so you can start to include And , Or operations, it breaks the filter. Even an attempt at a manual one fails, until you put the criteria range back down to one row, then it's fine again.
I've tried changing the Target Row to >2 but that didn't work. how to make the criteria range bigger, and no problems of breakage if you clear the cells? It makes for a very useful automated Advanced Filter.
Here's the code :
[Code] .....
Database = the named area of raw data.
DATA is the name of the raw data worksheet
The criteria range should be AZ1:BC3, but of course royally breaks it...
Sum And Filter VBA Code
Feb 17, 2010I got a job in hand and do not know how to solve. 1.º Part of the problem
I have a table that is exported to excel from a program, and this table is always different sizes so I really need a VBA code.
In column F i need to have the difference between the values in column G and column C
Ex: G1 - C1 = Goes to M1
G2 - C2 = Goes to M2
and so on
2.º Part of the problem
With the values in column M and column L. I need the sum of all column values in Column M where L is the value of 2. These data are to Sheet2 - cell A1
Filter Column A To Include Multiple Cells Of Data In Column D?
Mar 31, 2014Is there a way to filter column A but ensure it includes multiple lines of data in a different column.
I have attached an example of what I am looking for:
I need to filter by community but keep all the information listed in columns, B, C, & D.
So when I filter to Thunder Bay I would still see the 5 members listed in column D.
I realize the easy solution is to fill all the empty cells in column A to pick up the data in the other columns, but I do not want to Fill all the empty cells to include the name "Thunder Bay" (not the look I want for this spreadsheet).
Code To Filter, Sum And Return A Value From Data Set
Nov 26, 2008I deal with large amounts of data. For a score card I need find a way to filter data based on two constraints, sum it and display the output in a table. The two constraints are: Business Unit and Maintenance Type. I played around with recording filters, but the code becomes very unwieldy. From past experience with this site, where I used 10 lines, there's a way to do it in 2. take a look at the attached example book, a truncated data set and the output.
View 3 Replies View RelatedCode For Advanced Filter Function
Dec 5, 2008I have an Excel sheet with a few thousand rows which I would like to filter by a column with the name TrackingID. This column contains values like:
12AA1
23452BA2
234AA1
345635CA2
...
I would like to filter this column by the third character from the end (which is always a letter from the range [A-Z]). In the example above, this would be:
A
B
A
C...................
Advanced Filter Code Re Automation
Jun 19, 2009I'm trying to automate advanced filter but can't get past having just 1 critreria.
I have attached an example spreadsheet where the download dump is on "Data" sheet and the result of the advanced filter is on the "Result" page. I would like, if possible, for the result to come up every time the criteria is put in (they are all data validation lists).
so for example, if i select account code, all those codes come up then select period and the list dwindles down and again for cost centre. Is it possible to do this without using macros. I have found the following code butnot sure what to do with it (sorry).
Creating VBA Code To Filter By Dates
Jun 3, 2012I have a macro I am using that uses several date filters. There are filters for the previous month, previous 6 months, previous year, all dates in the future, etc.
Every month I have to edit the macro and change the dates in the macro so it remains accurate. Is there any way I can modify the macro so that the dates are stored in a cell within the workbook and not in the macro?
What I would like is to type the date ranges in a sheet within the workbook and have the macro look to those cells for the date filter instead of typing in exact date ranges within the macro. This way the actual macro code does not need to be modified every month. I would like to only have to change cells within the worksheet and not touch the macro code.
VBA Code To Select All Values Except 0 In A Filter
Jun 25, 2013I have a workbook and have created a filter across range A1 - BU1. I want to filter column BQ. In this column I want to use the filter to show all values except for 0.
View 2 Replies View RelatedFilter By Non-Blanks Macro Code
Mar 18, 2008I have just started trying to learn VBA as its pretty cool but I am getting stuck on how to filter by non-blanks. It's probably something easy:- here is what i have got so far, but its not working
With ActiveSheet
.AutoFilterMode = False
. Range("A1:V1").AutoFilter
.Range("A1:V1").AutoFilter Field:=22, Criteria1:=0
.Range("A1:V1").AutoFilter Field:=5, Criteria2:="<>"
End With
Filter Data Macro Code
Mar 30, 2008I do not know VB coding but is in need of help on data filtering/matching. I have 2 very big excel workbooks with a few thousand lines and am trying to do some filtering/matching. Example below.
The two workbooks I have contains same data in column A and also column D from the first data set is the same as column B in the 2nd data set. I am trying to add column C and D from the 2nd data set to the 1st data set and need to make sure they match up to column D from 1st set and B from 2nd set. It is quite strenuous to do this manually,
A1 2 3 100A
A1 2 3 100B
A1 2 3 100C
A1 2 3 100D
A1 100A AA BA
A1 100B AB BB
A1 100C AC BC
A1 100D AD BD
Filter Macro Code For Dates
Apr 30, 2008I have a set of data that I need to sort and filter and create pivot tables with 2-3 times per week. Example data sheet attached (confidential data removed). I will insert the code that I am using for reference. The issue is that when the data is filtered for 'Approved Timesheets' I need the filter to be based on 2 criteria; If myBaseRow.Cells.Item(1, 21) <> "Approved" Then If myBaseRow.Cells.Item(1, 44) <=StartDate And myBaseRow.Cells.Item(1, 44) >=EndDate Then
The first If statement works fine, but the second appears to be ignored?? I have tried to colour this part of the code blue to make it easily visible.
Private Function PTSubtotals(ByRef PTField As PivotField)
PTField.Subtotals = _
Array(False, False, False, False, False, False, False, False, False, False, False, False)
End Function
Sub Timesheets()
'
' Timesheets Macro
' Timesheet Filter 4/22/2008 by Richard Francis
'
Dim myWorkBook As Workbook
Dim myBaseWorkSheet As Worksheet
Dim myBaseRange As Range
Dim myBaseRow As Range
Dim RowsCounter As Long
Dim StartDate As Date
Dim EndDate As Date
StartDate = Format(Date, "mm/dd/yyyy")
EndDate = Format(Date, "mm/dd/yyyy")
On Error Resume Next
StartDate = Application.InputBox("Enter start date", Type:=2)
On Error Goto 0
If StartDate > 0 Then.................................
Macro Code Using Advanced Filter
Jun 28, 2008This is quite a easy one. I am a begineer so I don't know how to do it. I keep getting a runtime error. I want create a macro that does the following. I have this data(it is made up).
NameSchoolFee
JohnFDU700
MarkeyNYIT400
NickNJIT500
SamBU100
I want it to autofilter school njit
NickNJIT500...........
What would be the code for this? I want use the code for bigger data?. Also if you have a file which is 100 lines long and your macro does a series of steps for that file. Then you have another file and you want the same steps done but it is 500 lines long. How would you write a macro thatrun the steps taking in the last line and not just a 100 lines.
Code To Filter And Search For Criteria And Cut And Paste To Another Tab
Feb 19, 2014What I have is a workbook where I have to filter on a column called "Code" in a worksheet called "Current" and search for varies criteria and then copy these filerted rows and paste into a worksheet called "Past" and then delete the orginal rows form the "Current" tab.
e.g. filter on a column called "Code" and filter on the criteria that match "Monday", "123" and "Customer Accepted" and paste at the bottom of the "Past" tab and then delete from the "Current" tab. A message should then be displayed saying "Data Transferred OK" with the curser then highlighting "A1" on the "Current" tab.
The only cavat is that the code may find none, some or all of the required criteria, however, in the event of finding no matching data then a message should then be displayed saying "No Data Found" with the cursor then highlighting "A1" on the "Current" tab
As I have to repeat this to filter on various columns for various criteria I intend to modify the code accordingly, however, in once instance I will have to filter on a column called "Code" and filter on the criteria 1,2 and 3 etc but then I have to do second filter on column called "Code Extra" and then do a filter on the criteria 4, 5 and 6 so the additional code would also be good.
VBA Code To Filter Listbox As You Type In A Textbox
Nov 26, 2008I have a list of customers in listbox1 (the text values of which come from a spreadsheet), that I want to refine as I type in textbox1. I'm not sure if it's possilbe, but I would like it to work similar to the itunes search (if you're familiar with it) where it searchs for any occurance of the text within the list as opposed to just searching for the letters at the beginning of the word.
View 9 Replies View RelatedFilter Function Not Returning Correct Results In The Code?
Mar 20, 2013In an excel sheet, I am using a macro to filter. Macro code is as follows. When I run this macro, it returns 4 rows matching the criteria from 560 rows in the excel sheet.
VB:
ActiveSheet.Range("$A$1:$I$566").AutoFilter Field:=1, Criteria1:= _
">=11/11/2012 22:13", Operator:=xlAnd, Criteria2:="<=11/12/2012 6:47"
I want to use the same criteria in the vb.net code, to do same thru vb.net. But, when I run the same code in vb.net, it just returns only 1 row (1st row only).
VB:
[FONT=Consolas][SIZE=2][COLOR=#0000ff]xlsRange1.AutoFilter(Field:=1, Criteria1:=">=11/11/2012 22:13", Operator:=Excel.XlAutoFilterOperator.xlAnd, Criteria1:="<=11/12/2012 6:47")
This returns 1 instead of 4 expected.
VBA Code To Filter On Specific Two Dates (Pivot Table)
Jun 20, 2014I am trying to Auto filter on a pivot table "dates" via VBA coding.
Where:
Startdaycomp = 11-May
Finishdaycomp = 18-May
Rather then this showing all values between these dates, I was hoping to see only those two dates. This will enable my to compare weekdays for a Dashboard.
Is this possible?
Macro Code To Filter Out 'Exact Matches' In 2 Columns
Nov 29, 2006I have a large worksheet in drive C: called 'hits.csv' that has manufacturer part numbers in column G and column L.
I need macro code to find all rows in the worksheet where the part number in each cell in column G is exactly the same as the part number on the same row in the corresponding cell in column L. The macro should then delete/remove all rows where there is no exact match.
Note: The part number in every cell in column G is the only thing that is in each cell in that column. However just to warn you that the part number in every cell in column L is at the beginning of each cell, followed by a space and then a description of the part.
Once it has done the above, I would also like this macro code to open a worksheet called 'partnumbers.csv' in drive C:. It should then compare the part numbers in column A of this file with the part numbers in the above worksheet ('hits.csv'). The cells in Column D of the file 'partnumbers.csv' all contains a price. Where the macro finds an exact match on the part numbers in these 2 files, it should copy the price from the cell in column D in the file 'partnumbers.csv', into Column K of the other file, 'hits.csv' where the match exists.
Advanced Filter Active Sheet Macro Code
May 9, 2008the macro mentioned below has been assigned to a combo-box form. I have 2 different datasets in the same sheet, they have the same headers (but named differently, myhead and myhead1) and the same adv filter criteria range (named as "dcrit") is applicable to both datasets. So, if an item is selected from the combo-box, both the datasets should get filtered according to same criteria. how i can combine the 2 IF LOOPS mentioned in the code?
Sub myfilt()
Application. ScreenUpdating = False
If ActiveSheet.FilterMode Then ActiveSheet.ShowAllData
If Not (Range("indsignal")) Or Not (Range("countsignal")) Then
Range(Range("myhead"), Range("myhead").Offset(1, 0).End(xlDown)).AdvancedFilter _
Action:=xlFilterInPlace, CriteriaRange:=Range("dcrit"), Unique:=False
End If
If Not (Range("indsignal")) Or Not (Range("countsignal")) Then
Range(Range("myhead1"), Range("myhead1").Offset(1, 0).End(xlDown)).AdvancedFilter _
Action:=xlFilterInPlace, CriteriaRange:=Range("dcrit"), Unique:=False
End If
Application.CutCopyMode = False
Application.ScreenUpdating = True
End Sub
Filter Range Multiple Times In Macro Code
Jun 11, 2008I've taken data from a fixed-length text file and the records are identified using the first two characters on each line of the text file. I've managed to identify these in each row with other bits of code so that was fine.
Now, I have 56 string variables (identifying my record types), which I'm assigning into an array. Then, I want to go through each variable in the array, performing the same action by way of a For Next Loop where, by taking this particular RecIDNo (see my code) string variable I will get the code to copy/paste the data into the relevant worksheet (where later on I will apply a text to columns using another array). But first, this set must work before I can do that! To avoid confusion, note that the record types i.e. 01 through to 56, will be filtered, then copied into the corresponding worksheet with the same number.
The problem I'm getting is the autofilter I'm applying, then the array I'm trying to reference (to avoid repetitive coding!) doesn't work as the code doesn't compile (I've not worked a lot with Arrays but I'm learning all the time!)
Option Base 1
Sub test()
'The array is declared here:
Dim RecIDNo(56) As String
'The arrays are assigned the string variables below:
RecIDNo(1) = "01"
....
RecIDNo(56) = "56"
'This worksheet contains my data:
Sheets("DATA").Select
For RecIDNo(1 To 56) '<--I THINK THIS IS WHERE I'M GOING WRONG!!
'Filter and select arrays:................
VBA Code To Change Pivot Table (Report Filter) From Userform Textbox / Combobox
Aug 16, 2013I've prepared an excel file with a pivot table. Now I would like to change the Pivot "Report filter" by using Textbox on Userform. I've attached an excel file as an example.
View 2 Replies View RelatedCode To Delete Rows Based On Status Code In Column
Jul 24, 2009I'm trying to write a VBA script which will delete all rows in my Excel spreadsheet where Column I (which contains a status code) does not contain the word "Completed".
At the moment, I'm doing this the other way round: my script is able to search for entries in Column I which contain the status codes "Pending", "Awaiting Authorisation", "In Progress" etc and delete them. The idea is that when all those rows are deleted, I'll only be left with rows which have a status of "Completed". This works fine at the moment. However, the concern is that if a brand new status code is added to the data file, my script would be unable to pick it up and delete it. This is a small sample of the code I'm currently using (which deletes all the rows with statuses other than Completed):
How To Filter Row When Column Contain Value Using Vba
Aug 7, 2010How to filter certain row when column contain certain value using vba? i try to manually add in filter using Excel, but it doesn't works, how to write vba code to filter out rows of which some of its columns contain certain value?
View 5 Replies View RelatedFilter Using Row And Column
Oct 13, 2009I have set of data(attached example file) in which i have to categorize the data depending on the LOC (column C) which is below 1000,between 1000-3000 and greater than 3000.
Once i have filtered data i need to get the counts for each impacts.
I have put the sample output in next tab(sheet 2)
Filter Row If Value In Column C Or D Or Both?
Oct 9, 2012I am trying to macro a filter for column C & D to hide rows that contain blank values in BOTH columns.
In other words..keep row if value in column C OR D OR BOTH.
Original Data Set;
table.tableizer-table {border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif; font-size: 12px;} .tableizer-table td {padding: 4px; margin: 3px; border: 1px solid #ccc;}
.tableizer-table th {background-color: #104E8B; color: #FFF; font-weight: bold;}
ABCDE 1WH4_BL_STKTRUEÂ Â 1 2JBS_BL_STKTRUEÂ Â 1 3Total [Mill]TRUE10001,7001 4Total [Waste]TRUE50000Â 1 5Total [Stockpile]TRUEÂ Â 1 6Total [Mill+Waste]TRUEÂ 15,0001 7RPG4_CR_DST {WH4}TRUEÂ Â 2 8CR_DST {WH4}TRUEÂ Â 2 9JB_CR_DST {WH4}TRUEÂ Â 2 10RPG4_CR_DST {WH123}TRUEÂ Â 2
Desired Filtered Data;
table.tableizer-table {border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif; font-size: 12px;} .tableizer-table td {padding: 4px; margin: 3px; border: 1px solid #ccc;}
.tableizer-table th {background-color: #104E8B; color: #FFF; font-weight: bold;}
ABCDE 3Total [Mill]TRUE10001,7001 4Total [Waste]TRUE50000Â 1 6Total [Mill+Waste]TRUEÂ 15,0001
Filter Even The Column No Changes
Sep 20, 2006Filter Even The Coloumn No Changes
how to Filter Even When Coloumn No Changes
i have a macro to filter various coloumns on various criteria assuming the headings are same everyday.
But my parent co employee sometimes changes the heading order('exceed' heading changed like 'u' clumn to 'v')
how to cope with this in macro/VBA
How To Filter With Locked Column
Jul 30, 2014I have a spreasheet with one locked collum that I don't want to be edited. Is there any way of filtering while this collum is locked? It seems to be that once it locks the collum it also locks the filters?
View 6 Replies View RelatedFilter Column From Cell Value
Oct 16, 2009I have been trying to filter a column from the value entered in to a cell and hide all rows not matching.
I would like to have a macro button that will look at cell C2 and then filter column E from cell E5 down to the end of the sheet since the row count will change often. I have attached the sheet I'm working with.
So I enter HCLU into C2 hit the filter button and all rows with HCLU in the E column stay visible and all not matching HCLU become hidden or deleted.
VBA Filter Part Of Column
Feb 19, 2013I've managed to use the following VBA to filter a sheet based on the value of cell B1:
Private Sub Worksheet_Change(ByVal Target As Range)
If (Intersect(Target, Range("B1")) Is Nothing) _
Then
Exit Sub
End If
Cells.AutoFilter Field:=1, Criteria1:="=" & Range("B1")
Range("B1").Select
End Sub
I have tried to use this for a different sheet with "fixed head data" that needs to stay at the top of the page (range B1:K7), for printing purposes.
How to modify the above code to filter column A (from row 8 downwards) depending on what's entered in the cell A1.
Also - if possible, "if A1 is empty - display all rows".
Determine Which Column Has A Filter?
Jan 30, 2014I would like to determine using VBA which Column or Range-of-Columns have a filter applied.
I need to change filters, depending what part of the sheet the user is looking at.
Not sue why, but in my IE browser, I cannot Paste code anymore .
Code:
