Texts Automatically Change The Currency Depending On The Choice Made In The Previous Userform

Jul 3, 2008

I have options buttons in a userform, first is "$" the other is ""

When somebody chooses one of them, it writes the choice to a cell in the data sheet. But when clicked on the next userform I want some of the texts automatically change the currency depending on the choice made in the previous userform.

The formula below was is example

=""&Data!$A$2&" / m"

=""&Data!$A$2&" / kWh"

View 9 Replies


ADVERTISEMENT

Automatically Fill Data Depending On Choice From Drop-down Menu

Dec 28, 2007

I have three lists in the first sheet 'Food', 'Quantity', 'Points Value'
Each food (i.e. tuna, pasta, anchovies) has a quantity (i.e. 40g) and a points value (i.e. '50'). The first list ('Food') has been copied as a drop down list in the second sheet. When selecting a food, I would like the cells 'quantity' and 'points value' to pre-fill - taking the data from the first sheet.

i.e. if say Anchovies has the quantity value '30g' and Points Value '2' on the first sheet, then in the second sheet if anchovies was selected from the drop-down menu, these values would add themselves. how to do this? I have attached a sample file shwoing what I want to do.

View 2 Replies View Related

Automatically Change Currency Format

Jul 13, 2006

AutoLinked keywords will cause extra spaces before keywords. Extra spacing is NOT transferred when copy/pasting, but IS if the keyword uses "quotes".

USD 100
EURO 100

Is it possible to automatically make it:


USD $100
EURO 100

View 9 Replies View Related

Excel 2007 :: Automatically Converting All CURRENCY Symbols To ONLY Currency Selected

Mar 11, 2012

How to make EXCEL 2007 Automatically convert all my CURRENCY symbols in all cells formatted for CURRENCY in THE SAME SHEET to the one and ONLY currency selected in JUST ONE cell ? (i mean, after conversion, all of them are Not just display currency symbols, but Calculable monetary values like regular Excel's built-in currency format)

I am a dummy in VBA so I really am not familiar at all if the solution is really one of VBA. I don't even know how to start programming VBA at all in Excel.

View 3 Replies View Related

Preventing The Same Choice Being Made In Two Drop-downs

Dec 11, 2008

I am building a template in Excel and I want an error message (or any message) to appear to the user if they select from a static drop-down the same option in column I as in column J (i.e. they have to pick something different in each case).

Issue is I can't exclude any options from the second validation because, essentially, it's the same list. So if, on one row, a person picks "Bill" in column I, they can't pick "Bill" in column J. However, if they have picked "James" in column I, they can pick "Bill" in column J.

Don't know if this is well explained enough but would appreciate any tips on this - I've tried messing about with validation, conditional formatting, putting an IF statement in the next column and so forth but I haven't found a method that isn't convaluted and easy for the user of the template...

View 9 Replies View Related

Linking A Choice Made In The Listbox To A Variable

Apr 19, 2007

In my interface, I have a listbox with the numbers 1 to 100. In my macro, I need to link the selection made in the listbox (from 1 to 100) to a variable. With that variable I perform simple calculations. Also, do I need to declare a variable for both the selection made in the listbox and the listbox itself?

View 5 Replies View Related

Graph To Automatically Change Format Depending Upon Lookup Information

Mar 9, 2012

I have a graph which displays information from a vlookup.. The vlookup can bring either numbers which are in percentages format or ordinary number format.

The question I have is is it possible for the graph to automatically change format depending upon the information who is looked up..

If so how can this be done..

View 1 Replies View Related

How To Sum Amounts In Column Depending On Currency

Dec 19, 2013

I am creating jet report, however am having to use Excel formula to create totals.

I am trying to sum the amounts in column I depending on the currency, although as it's a jet report it needs to update when the report is run.

My formula: =SUMPRODUCT(SUBTOTAL(9,OFFSET(I4,ROW(I4:I6)-ROW(I4),0)),(F4:F6=Options!B4)+0)

View 2 Replies View Related

Creating Spreadsheet Of Dropdown Menus Each Affected By The Previous Choice?

Jan 11, 2014

I am trying to build a complex equation that has multiple parameters filled by several choices from several different dropdown menus.

For instance:

I'm building a set of 5 dropdown menus, that each lead to filling certain boxes with a number created from a formula. I've provided a small sample to explain what I'm trying to do.

My problem is, I'm unsure of how to make it so certain drop down menus affect the information inside of the next. Like, I want to have someone select "Oscar" under the characters, and have the "Lances" list come up in the Weapons column menu. I don't want the Weapons menu to be selectable in any way unless a "Character" has been selected.

View 4 Replies View Related

Sort Depending Of Previous Selection?

Jun 12, 2014

Attached is a copy of a spreadsheet that im working on, im trying to sort staff on their correct locations depending where i originaly select them.

The attachement will have more info

View 8 Replies View Related

Automatically Goal Seek Whenever Changes Are Made

Oct 18, 2003

I have created the following in an effort to automatically goal seek whenever changes are made to the cell C2.

Sub Worksheet_Change(ByVal Target As Excel.Range)
If Target.Row = 3 And Target.Column = 2 Then
Range("D19").GoalSeek Goal:=Range("C2").Value, _
ChangingCell:=Range("D3")
End If
End Sub

As far as I know, the Macro is running all of the time? When I use goal seek manually it works fine. Assuming the above is running, when I change the value in C2 nothing happens. Does the fact that I have a three sheet workbook make any difference? I am sort of lost. By changing the value in C2 I want Excel to change the value in D19 to match C2 by adjusting D3.

Application.EnableEvents = False
Sub Worksheet_Change(ByVal Target As Excel.Range)
If Target.Row = 3 And Target.Column = 2 Then
Range("D19").GoalSeek Goal:=Range("C2").Value, _
ChangingCell:=Range("D3")
End If
End Sub
Application.EnableEvents = True

Doesn't seem to work either. However, I don't really know if other settings in the workbook are correct.

View 9 Replies View Related

Dropdown List Depending On Previous Values?

Jan 3, 2013

see attached document - this is a stock record sheet. what i want it to do is when Bed is seleceted in column B - i want colum C to show the BedSize list which is in the lists tab. and the same with Chair i want it show ChairSize

View 14 Replies View Related

CheckBox To Automatically Get Checked If A Selection Is Made In The Listbox

Oct 14, 2008

I have a userform with a CheckBox and a ListBox. Is there a way to have the CheckBox to automatically get checked if a selection is made in the listbox?

View 9 Replies View Related

Running Macro When Change Made To Worksheet

Feb 16, 2012

The intent of the code below is to run the marco HideCol when a change is made in cell C10. If I actually change the value in C10 it works. However, I have C10 linked to another worksheet (=anotherpage!A13). When the value changes, my macro is not executing.

Here is the code:

Private Sub Worksheet_Change(ByVal Target As Range)
Dim changed As Range
Set changed = Range("C10")
If Not Intersect(Target, changed) Is Nothing Then
HideCol
End If
End Sub

View 3 Replies View Related

Currency Format In Textboxes Of Userform?

Feb 11, 2014

I have a userform that one textbox takes it's value from a cell in sheet3.(k2). The format of this cell is currency. How the textbox takes the same format as the cell?

In the same userform i have a series(prcase1,prcase2..) of textboxes that i want to have currency format as the user type numbers on these.

How can i do this?

View 11 Replies View Related

How To Get Userform To Display Figure As Currency

Dec 30, 2012

I am planning to use a userform to input various figures, and come up with a total.

How do I get the user form to display a figure as currency?

Also, how do I get the user form to display a figure as a date?

View 3 Replies View Related

Multiple Currency Format From UserForm?

Feb 26, 2013

I have a UserForm with a ComboBox for the currency (30-35 items) and a TextBox for the amount.

The currency codes are displayed like this: EUR, USD, RUB, GBP etc.

How do I paste the result of TextBox in a selected currency format in a cell in worksheet?

Example:
ComboBox value is "USD"
TextBoxValue is "500"

Cell A1 value should read "500 USD" as currency not text.

View 3 Replies View Related

UserForm - Keep User In Textbox If They Made Format Input Error

Oct 27, 2012

I have a userfrom with a text box which is used to receive a telephone number from the user. The 'Event' code that checks the formatting of the telephone number is "tbCustTel_Exit". If my user enters a format other than what is acceptable for a tel number, they get an error message telling them to re-enter.

My problem is they still end up EXITING that text box they made a mistake in? How can I override them exiting the text box if they make a mistake - and keep them in the text box so they can try and re-enter the tel number again?

View 6 Replies View Related

Excel 2013 :: All Sheets Being Automatically Changed To Currency Format

Dec 2, 2013

We have 3 PCs, all running MS Office 2013. On 1 of these machines, it is doing strange things with formatting. If you open a document or try to paste anything into certain documents, it decides everything is currency format and assigns all sorts of wrong formatting to the entire sheet, or the entire document. There may be some cells in the doc that are indeed currency, but only a small proprtion. If I open a new, fresh document and paste into that document, it does not do this, it seems to work normally, only applying currency formatting where it might be applicable. On some larger docs that have this issue, no matter what I do, it just continues to apply these strange settings.

View 2 Replies View Related

Make A Choice Between And $ In The Userform

Jul 24, 2008

I have 2 option buttons and 3 userforms. The passage between those userforms are made with "next/back" command buttons.

Options buttons are and $ and they are in the first userform.

If the user make a choice between and $ in the userform1, the following macro plays

If Me.Dollar Then
Sheets("Data").Range("B2").Formula = "$"
Else
Sheets("Data").Range("B2").Formula = ""
End If
Problem

The other 2 userforms contains texts that depends on the choice made in the first userform/option buttons ( or $)

Private Sub UserForm_Initialize()
Application.ScreenUpdating = False
Text1.Caption = Worksheets("Data").Range("B2").Value
Text2.Caption = Worksheets("Data").Range("B2").Value
Text3.Caption = Worksheets("Data").Range("B2").Value
End Sub

so in theory userform initialize should change the text and get what s written in Data Sheet.B2 cell automatically and INSTANTLY. But it only gets the initial choice and when I go back/forward between userforms and even change the to $ or vice versa the inital choice remains in the next userforms.

View 9 Replies View Related

Identify The Cell Address Of Last Change Made In Sheet Using VBA?

Aug 13, 2012

I am using an event macro to trigger a set of calculations. In the spreadsheet, users have a choice of 3 input cells to work out an answer; these 3 cells work out the same cost from different angles depending on the variables available to the user.

Users only ever need to fill in one of the three cells to work out the answer as the event macro I designed, should (upon input by the user), work out the remaining two input cells using logical arguments.

The macro and calculation work fine, except in the event of users amending a value in an input cell previously updated; in other words, if all 3 cells contain a value and 1 of them is being changed by a user.

The issue: I need the event macro to recognise the location of the last change made by the user in order to determine which 2 of the 3 cells need to recalculate. However, users will invariably press enter or tab etc... upon making changes and this has caused me issues so far.

What I have tried already:

1) running another event macro "on selection change" to record elsewhere in the model all cell selections as and when the user interacts with the model

EFFECT: it made the "on change" event macro very slow and clunky; so I need to avoid
2) declaring a range as set r = activecell.address

EFFECT: this did not work as the active cell's address would in fact be the address on the last cell; e.g. the one selected further to pressing enter (often the one directly below the cell recently changed)

A solution to add to the existing "on change" event macro that identifies the last edited cell

View 8 Replies View Related

Change Text Colour When Entry Made In Another Cell

Jan 10, 2010

I am using Excel 2003, my problem is that I have cells D4 & E4 with red text, when an entry is made in B4 (say $640, the amount can vary) I want the text in D4 & E4 to turn black. I have attached a section of the document in question.

View 5 Replies View Related

Automatically Trigger Formatting Code On Drop Down Choice

Apr 6, 2008

I'm building a Excel 2003 workbook that needs more than 3 conditional formats. I've tried the code given in the FAQ: Get Around Excels 3 Criteria Limit in Conditional Formatting but this only works on cells being modified directly. I've also tried the code in the post: VBA Conditional Formatting - Refresh when data changes but neither does the job I need.

I'm using a Format Control to present the user with a list of choices. When the control changes the target cell I want to apply a conditional format to that cell. This image shows the form. When the Format Control selection (in B2) is changed I want to apply conditional formating to the target cell (A2).

There will be up to 10 choices and therefore conditions.

View 9 Replies View Related

Can One Item Be Made To Stand Out In Dropdown List Combobox On Custom Userform?

Oct 12, 2013

I have a list of employees that can be assigned to tasks, the list is large enough that I cannot remember who is assigned to what.

All the employees assigned major tasks are automatically filtered out but these are employees with administrative tasks that should only be assigned as a last resort. I would like to assign the employees with administrative tasks a gray, italic, strike-out or some other font to indicate that they are different.

I assume this is done during the Add Item process...

View 2 Replies View Related

Change Currency Symbol From List

Sep 18, 2007

I have attached a file: I want to select the currency in Data!F7 and based upon the selection I want the number formats in Prices!D17:D19 to dispaly the relevant currency symbol.

View 3 Replies View Related

Pop Up Form Within Userform To Confirm Choice

May 11, 2009

pop up form within userform to confirm choice. I have a button within a userform that clears the form:

View 5 Replies View Related

Make Chart That Will Constantly Change As Different Selections Made By Person?

Jun 18, 2014

I have created a spreadsheet which uses data validation to allow a user to select a company, start Date, end date, and projected months in order to output different figures. I have attached a spreadsheet to this post in case that was hard to understand.

Since there is data validation, indexing, and matching going on, as different selections are made, various tables change as a result. What I mean as you open the example sheet and start messing around with the data validation boxes.

The problem I am encountering now, is creating a chart that will also keep changing as the user changes their selections in the data validation boxes. I am unsure if this is even possible, but I figured it was worth a shot to ask. On the example sheet, I have included a graph similar to the one I want, but it only contains data in a certain range of cells, rather than dynamically changing to accommodate whatever data is outputted.

Here is what I am looking for in the graph:

1. Whatever dates are selected by the user in the data validation boxes, along with the projected dates will be on the x-axis.

2. The PMPM figures associated with the selected dates, and the projected dates on the y-axis.

3. Ability to make different selections from the data validation boxes and still have a dynamic chart that keeps updating itself.

View 2 Replies View Related

Storing Userform Textbox Inputs As Currency In Array?

Jun 23, 2014

I have a userform where the user enters prices for up to 12 items in textbox controls, and these prices are stored in an array. The textboxes are titled tbPrice1, tbPrice2, etc. I'm having an issue with the line of code I am using to store the values in an array. Every time I attempt to store them, I get runtime error 13 type mismatch, but I don't understand why.

dim PartPrices(1 to 12) as Currency

For x = 1 to 12PartPrices(x) = IIf(Trim(Me.Controls("tbPrice" & x).Value) & vbNullString = vbNullString, CCur(0), CCur(Trim(Me.Controls("tbPrice" & x).Value)))Next

A little more explanation here. Not all 12 parts will have prices, so I use the IIf statement to store the value 0 whenever the user has left a price field blank. I use trim in case they leave spaces in the price textbox or something. When the field is not blank, I take the value entered in the textbox, convert it to currency and attempt to store it in the relevant element of the array.

View 2 Replies View Related

Change Currency Formatting Based On Value Of Another Cell

Jan 6, 2010

I have a conditional formatting issue in Excel 2007.

I have a drop down list which shows 4 countries; UK, DE, FR and NL

I would like to change the format of a number of cells to or dependent on what the dropdown box has chosen.

I have a number of vlookups, so it pulls the right amount, and the right SKU, but I cannot get it to change the formatting correctly. I have even tried to simplify it to say, if UK use and if <> UK then use , but that doesn't change either. If I change it, so it colours red for UK, and clear for not UK, that works.

View 12 Replies View Related

Currency Format To Change Based On Country

Feb 26, 2008

I am struggeling to format a column to display currency values formated with a different currency mark than the local system currency. Right now, when I run the macro on my machine I get my local currency (Israely Shekel), and on the Client's machine I get Euro. (I need it to be in dollars)

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved