I have a userform that should open a file and then figure out if a integer meets a condition. All this works.
My problem is that i want to run another sub from this userform after the file is open(this will be the active file).
I want to open a file (Sam) if a a condition is fulfilled.
So, my file Sam.xls has a sheet named "Control" (veryhidden), the cell A1 has value (A1=5)
When I open Sam file, the code checks another file DOT.xls (the user should not see this process) and if it finds the same value in Sheet2 (veryhidden), cell A1=5, the file Sam to be opened.
If the code does not match the values the Sam file to be closed, Sheet "CHIO" to be deleted and the application closed.
formula to find the last number in a cell and if that number meets a condition put a letter in the adjacent cell.
In cell A1 I have numbers as such 254671 (these numbers vary in length but not normally more than 8 in length). I want to know if the last numeral on the right is a 1 and if so then enter in the adjacent cell (B1) the letter y if not then leave blank.
I have a spreadsheet with about 225 sheets or so containing data. The date is in column J. I am needing to delete all the Rows that have a date greater than or equal to 06/06/08 and loop through all of the sheets.
I recorded a macro to find the date 6/6/2008, then highlight the row, then select the next 450 rows and delete them and it worked ok, but I don't know how to get it to loop through the sheets to the end.
I currently have a report that I have code on that will change the color of a cell based on whats in the cell.( Code posted below) However I also need to look at $J and if the first letter of the value in that column is a "z" then I would like to change that whole row to icolor 13 (purple).
For example J14 might be "Z-Thomas". if it does I would like that row 14 to change to purple.
Also I would prefer that the solution be in VB, so that we do not have to do something in VB with the fix below AND do something in Conditional Formatting.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("$A:$E")) Is Nothing Then
Select Case Target
Case "y", "Y"
icolor = 4
Case "n", "N"
icolor = 3
Case "?"
icolor = 6
I'm setting up a spreadsheet for work and i have a question. I'm not familiar with the formulas. If i want to set up a formula to where if i type "complete" in the cell it will move the entire row over to the next sheet.
View 2 Replies View RelatedI have 5 cells on a sheet. When one has an X in it the other 4 go blank. It so I can keep track of who has ownership of a job.
View 6 Replies View RelatedI'm trying to Multi-Select rows in order to format all rows, in "One Step" if the cell in col. "A" = 1. I managed to write the hereunder code but I'm still frastrating because I don't like the first RNG setting command. How can I avoid declaring RNG as row(1) and still be able to run the code. I assume I need some other Range set for RNG which, unfortunately, I could'nt find and the command I used includes row1 in RNG although cell A1 = 5.
Sub Conditional_Multi_Rows_Select()
Set RNG = Rows(1) ' this is my problem
LR = [A65536].End(xlUp).Row
For R = 1 To LR
If Cells(R, 1) = 1 Then
Cells(R, 1).EntireRow.Select
Set RNG = Union(RNG, Selection)
End If
Next
RNG.Select
Selection.Font.Bold = True
Selection.Font.ColorIndex = 3
End Sub
I had in mind to use:
Set RNG = Rows(65536)
but this will not make it a "neat" vba code, either.
I have 2 sheets, sheet1 and sheet2. On sheet1 I have a cell (w,3) which displays either "OK" or "Needed". It will be like this for every row on the sheet. On sheet2 I have more information. I have been trying to create a macro or VB function that everytime the workbook is opened will scan the entire column W for any that say "needed" and if/when one is found copy the data in the cell in column A of the same row from sheet1 to column A of the first blank row in sheet2.
So say cell w,6 displays "needed", I then want to have cell a,6 copied from sheet1 to sheet2 into the first column A that is blank. I don't really care if when w,6 changes to "OK" it removes the entry on sheet2 or not, in fact if it does that would be great.
Here is the code that seems to be not so complicated and has copied information from one sheet to another, can't get it to work consistantly. I copied it off a similar post on this site and am not sure what the last value = "1" is doing but I doubt its helping my cause. The cell I need to trigger the action is in the 23 column, the cell I need copied is always in the first and the cell I need it to be copied into on the 2nd sheet is always in the first column as well. I'm pretty good with regular logical statements but I feel that a lack of knowledge about all the available commands is really whats hurting me on this....
Two Sheets:
1) Top Sheet
2) IRA
- Cells A4:A10 of sheet "Top Sheet" contain dates. i want B4:B10 to show the IRA value as of the date in column A:
____A__________|_B______________________
4 | 09/22/2005 | $ Total as of date in A4
5 | 10/06/2005 | $Total as of date in A5
6 | 10/20/2005 | $Total as of date in A6
7 | 11/03/2005 | $Total as of date in A7
8 | 11/17/2005 | $Total as of date in A8
9 | 12/01/2005 | $Total as of date in A9
10| 12/15/2005 | $Total as of date in A10
- Cells A6:A12 of sheet 'IRA' also contain dates but not in the same sequence (some date ranges had several transactions), B6:B12 of sheet 'IRA' contains the transaction values during the date range:
____A__________|_B______________________
6 | 09/22/2005 | $100
7 | _ _ _ _ _ _| $200.................................
Can you suspend a userform after open an excel file from the userform? I have a userform that allows the opening of excel files (one at a time), but the user has to close the userform to access the excel file. Can I work with the file while the userform is still active?
View 2 Replies View RelatedI have a Userform in Excel.
My requirement, is whenever I open the Excel file, it should open the userform and should not show the excel file at all. And the form is closed, the excel file should be saved and closed.
Also, I need the minimize button on the form and in the taskbar, it should not display the Excel file, it should display only the Userform.
Hi, I'm trying to use a userform to open a previously saved file to avoid having the users dig through the folder and maybe work on the wrong file.
I have a file I have created to test if the code works, but the macro keeps giving me the reponse I set in case it doesn't find the file.
The data for Account (Account1 and Subaccount1) is coming from a text box, as well as for category (Category1). The data for Company is an optionbutton frame with 4 options for the user to select from.
I am working on a project where i am having 8 excel files saved at diffrent location so i want to create userform which will open particular file location and from that user can select the file which he want and then can go further. so i need a coding so that user will be prompt 8 times with file location. for eg. once user select particular file from location then again this code route him to select next file from file location. is it possible??
I tried using below code but in this code when i run userform file is not opening but when i run this code mannually by pressing F8 desired file is opening i dont know what is glitch in this ? another problem i am facing is not able to understand how to repeat this steps again to open another file using this code??
VB:
Private Sub Commandbutton1_Click()
Dim f As FileDialog
Set f = Application.FileDialog(msoFileDialogFilePicker)
With f
[Code]....
how I can make a textbox on a userform an Integer? So that I can add all the variables.
View 1 Replies View RelatedI am planning to use a userform to input various figures, and come up with a total.
How do I get the user form to display a figure as currency?
Also, how do I get the user form to display a figure as a date?
I am currently doing a spreadsheet and require cells in column f (which have monetry values entered) to colour in different colours depending on whether there is a yes or no value in column e.
View 2 Replies View RelatedI have a tool file which contains Excel VBA codes. When I click button it asks to select a file. I want that anytime I click the button the dialogue box should open in the folder containg the tool.,
View 1 Replies View RelatedI've got a spreadsheet with several rows and the numbers within those rows are totalled up at the bottom. Is there a way where i can highlight the cell within the spreadsheet and it takes it off the accumulative total at the bottom? or something similar to this effect? I just don't want to have to remove figures from this spreadsheet and highlighting will be a good way of seeing what has been done
View 1 Replies View RelatedI am trying to create a user form that will allow the user to type int values in boxes. Then when the user clicks the submit button the code needs to add the values from each user input box to the existing values in specific cells accross multiple worksheets. Then the form needs to be cleared after the cell values are updated. I can create the form it is the code on the submit button i am lost on. Also it is important that some boxes may be left blank.
If you click the Grey "Qty Form" button on sheet1 the form will open. User data numbers can be entered in the blank boxes. When the submit button is pressed the form needs to add the user entered numbers to the numbers in the corresponding cells in sheet 1 and sheet 2. How to code the submit button to do this properly. Also after the data on the spreadsheet is updated the form needs to be cleared and start the cursor back in the Item 1 box on the form.
I learnt that " " & can combine the text and figure. However, when it comes to a negative numbers, i dont know how to maneouver it. Eg, Cell A1 is USD(50,000.00) and the comment in Cell B1 is Cost is USD(50,000.00). So the function in B1 = "Cost is "& what to put here?
View 3 Replies View RelatedI want to create a macro that will “open the look in list” and stop so I can pick a file to open. I’ve tried to use “record a macro” and “ctrl-o”, but the record a macro won’t stop until I pick a file or cancel the file list. I also tried to use “o” in the short cut key box
View 5 Replies View RelatedWhat I would like to do is to be able to open a second workbook from a user form, preform some work on it then save and come back to the same place in the original user form.
So in steps:
1 : user clicks command button to open user form
2: user then clicks on command button on userform that opens 2nd workbook via a yes / no message box, but closes userform on 1st workbook (would be ideal if this could stay open, but hidden)
3: user then does work on 2nd workbook,
4: userform on 2nd workbook saves then activates the 1st workbook and reopens the userform
This is where no matter what I try I cant get the command button on the 1st userform to be clicked automatically so the yes / no message box appears.
This is part of the code in the 2nd sheet commandbutton that saves / closes / opens
Code:
Unload Me
ActiveWorkbook.save
Windows("ABC.xlsm").Activate
Sheets("Request Sheet").Activate
Call Sheets("Request Sheet").ForceClickOnBouttonXYZ
Call UserForm1.CommandButton6_Click 'this is where I cant get it to work!!
Windows("xyz.xlsm").Close
ABC is the 1st workbook
xyz is the 2nd workbook
This is the code on the 1st workbook I use to call on the 2nd workbook
Code:
Public Sub ForceClickOnBouttonXYZ() Call CommandButton1_Click End Sub
I have two workbooks. One is a no-nonsense form interface that my bosses will use to enter safety information. I'll call this workbook "Form". This file is stored locally on each of their computers. The other workbook is stored on a common drive. I'll call it "Master".
When my bosses fill out the Form and click "Submit", the Master file is opened, and certain cells are populated based on information entered in the Form. This is the code I am using to make this happen:
I'm doing the following:
Dim myname As String
myname = Application. GetOpenFilename
I use it to attempt to open first a QuickBooks file and then an excel workbook.
The Quickbooks file opens fine. The Excel workbook never appears to open but
I do get the full file pathname to my excel workbook returned which I then
parse off to get just the workbook name.
Why would it behave this way? I open both these files manually all the time.
Also, I'm trying to use a filter as follows:
myname = Application.GetOpenFilename("*.QBW")
I get a compile error saying that I'm calling the function wrong.
I would like to have a popup appear on the opening of my spreadsheet that warns me of things that are past due or due today. I would like it to be in list form...
For example my source is:
Customer 1 Customer 2
Topic Expected Complete Expected Complete
One 05/18/2007 05/10/2007
Two 05/12/2007 05/15/2007 05/18/2007 05/18/2007
Three 05/12/2007 05/17/2007 05/16/2007
Four 05/21/2007 05/17/2007
What I would like to see is a popup that analyzes this data with the result of:
If run today...5/18...................................
I am trying to open a website, then for excel to download the csv file, then for it to save it in a specific folder under a specific name and file format (excel).
I am successful at opening the website with the following code, but how to do the rest.
Sub Searchez()
Dim IE As Object
Set IE = CreateObject("InternetExplorer.Application")
IE.Navigate "http://quote.morningstar.ca/Quicktakes/stock/keyratios.aspx?t=clwr®ion=USA&culture=en-CA&ops=clear" 'load web page google.com
IE.Visible = True
While IE.Busy
DoEvents
Wend
'IE.Navigate2 "javascript:SRT_keystuts.exportcsv()"
'this is the name of the download link as from when i hover my pointer over download link.
End Sub
I'm working on the following
Workbooks.Open Filename:= _
"D:CommondataIBMmainBRANCHBURG-PRODUCTS-BOM-ALUMINUM-UPDATE-" & Ucase(Format(DateAdd("y", 0, Date)), "YYYY-MM-DD")&".XLS"
ChDir "D:CommondataIBMmain"
ActiveWorkbook.SaveAs Filename:= _
"D:CommondataIBMmainBRANCHBURG-PRODUCTS-BOM-ALUMINUM-UPDATE-NAFTA.XLS", _
FileFormat:=xlNormal, Password:="", WriteResPassword:="", _
ReadOnlyRecommended:=False, CreateBackup:=False
ActiveWindow.Close
Date: 2009-06-03
What I'm trying too do is open a file, make an exact copy and save it under a new file name.
My problem is in the date formula the day is not always the same. In the sample case it's 03 at other times the day will change.
is there a way too get this too work irregardles of what the day might be?
I want to open a specific sheet and refresh only said sheet when i open another sheet for example x.xls
So opening x.xls will automatically open y.xls
I've tried this in the workbook code area but it doesn't do anything.
[Code] .....
Actually i've downloaded Tracking report of my SPO and this report is on 4-5 csv files (1 file per week). I have to gather data from these 4 files into one Worksheet. I have to do this with command button on my worksheet; with Open file dialogue box (i want to locate the csv files).
CSV files are something like that (I need only first 4 columns):
ABCDE1Name MSISDN Date Location MapLink 2M. Younus Safi "923***550577" "2011-10-07 20:36:18" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com" 3M. Younus Safi "923***550577" "2011-10-07 19:36:26" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com" 4M. Younus Safi "923***550577" "2011-10-07 16:39:58" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com" 5M. Younus Safi "923***550577" "2011-10-07 15:37:23" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com" 6M. Younus Safi "923***550577" "2011-10-07 14:37:05" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com"
and my Worksheet is like that (With a command Button):
I want to import first 3 columns of csv file on first 3 columns on my worksheet; leave 2 columns blank and then import the 4th column... now for example i have done importing data from 1st csv file and the data is on 50 rows.. i click the command button again, locate the 2nd csv file.. do the same thing (import 1st 3 columns, 2 blank, then 4th) --from 51st Row-- and so on...
ABCDEF1NameMSISDN DatedBlankBlank Location2
3
4
5
6
7