How do I make a row highlight based on a given number in a cell...
For example my spreadsheet has a balance column...when the balance shows 0.00 for that line i would like it to hightlight gray
I am trying to highlight a cell based on two randomly generated number, one is the column and the other is the row. Based on those values I want to change the color of a cell in a range of data. The formula I am using does not work like I intended. It only changes the cell once I enter a value in the cell not until. =OFFSET(A1,B27,B26). B26 and B27 are the cells housing the random numbers and A1 is the base reference.
View 1 Replies View RelatedI want to enter a unique ID into an input box which will tell which row that id is available and then it will again ask me which column the cell needs to be highlighted. Once i enter the data, it will then ask me what is the change in data (again via input box). i can then enter the change data and then it stops.
View 1 Replies View RelatedI have a large spreadsheet with many pieces of equipment in it. There are a few piece that I would like to highlight should thier computer license go out of date, or even better 30 days prior. I have a Feild with the Expire dates but it is at the end of the spreadsheet not in plain sight. Is there a way to make my Equipment description column highlight when the date in the other column reaches the current date (or 30 Days before). I have cut and pasted the part of the spreadsheet into a new file to make it easier to read and hid all the none important feilds.
View 5 Replies View RelatedI would like to highlight the cells in Column A the have numbers in them. Starting with that number shift down based on the number that many rows and highlight them.
HTMLSheet1 *AB154020842*4020843*4020844*4020845*4020846*4020847*40208483
5010909*50109010*50109011*50109012*50109013*50109014*501090153
50112016*50112017*50112018*50112019*50112020*50112021*501120222
50206523*50206524*50206525*50206526*50206527*50206528*50206529450212430*50212431*50212432*502124
Ive been trying to figure this out for a couple days with no luck. I have searched all over the internet but cannot find an answer.
I have a series of columns, and at the bottom of each column I have a cell (which ill call the Total Cell) which automatically adds up the 10 or so cells above it.
What I am trying to do is create a function so that if one of the Total Cells amount drops into the -1000 range Excel will highlight that particular cell or give an error or do something to draw attention to it.
I have a macro that already works well but I need to make a change to it and I can't figure out how to do it.
I need so when the macro is run it will prompt the user for a date. After they enter the date it will highlight cells A:K on each row that data appers.
A little background for this. It is a schedule for a call centre which can show two to three weeks of schedules per agent. We rerun the macro each day to update break times and I would like it so it will highlight todays line.
I have a cell that is going to be used for the quantity of a certain item. I would like to dummy proof this sheet as much as possible so that if someone puts in 21.5, that it will do something like change the value to either 21 or 22, since there can't really be a .5 of this item.
View 5 Replies View Relatedi want a macro that make acircle around number in acell in excel debending on the nuber that the student given that under 14 has take acircle over is none
like that
this is another example code i fill acell with gray color
----------
For Each cell In Range("q6:q580")
Select Case cell.Value
Case Is >= 16
cell.Interior.ColorIndex = 2
Case Is < 16
cell.Interior.ColorIndex = 15
End Select
Next cell
------------------
how to make a cell a color depending on a number in a different cell? Example...if A2 is 92.6 how would I make D2 blue? But if A2 were 91.9 how would I make D2 red?
View 5 Replies View RelatedIn a column in which there are repeating numbers is there a formula I can enter into conditional formatting that will highlight a cell when the number doesn't match the value from the value above it?
So in this example the values with an * would be highlighted.
1*
1
1
2*
2
2
2
3*
4*
4
5*
5
I want to highlight A1 red if C1 is greater than 55. Is this possible?
View 3 Replies View RelatedFrom what I understand this is a simple process but since I am new to programming and I am in need of help. I am trying to write into one of my macros that as it is searching in the sheet if it finds CRL in column C and if it finds a value between -1 and 100,000 in column K, then it will highlight the entire row green.What can I do to add this into my macro?
View 14 Replies View RelatedHow can I highlight data based on another cell in the same row?
Ex. I only want to Select data in Column C only if Column B = Rm2
A B C D
1 Bob Rm1 x 0
2 Jack Rm1 x 0
3 Dean Rm2 n 0
4 John Rm2 n 0
5 Barb Rm3 x 0
I am seeking assistance with code for column H to be highlighted when I have a value of "Pending" or "Work In Progress" is present in column E?
View 3 Replies View Related[Code].....
I am running a time series linear regression on a credit card company. The left most column is the amount of cards they had on a certain year and the prediction is the cards the regression formula predicted. The + and - are the columns added or subtracted the standard error which is 3.25. I am trying to highlight the closest +/- number to the original cards. For example, in the first Row 76.98 is closer to 78 than 83 is so i would like to have 76.98 highlighted...showing that subtracting the standard error gave us the closest prediction. The second column the 87.085 cell should be highlighted because adding the standard error gave us the closest prediction to 86.4.
I have a spreadsheet where if Cell A2 says "Deposit", Rows A2-E2 would be formatted with a Blue background.
I've tried conditional formatting, but I can't built it into a Macro (I can't make it run), and it only highlights the cell that has that value. I also tried having the spreadsheet filter down to only the values I want highlighted, then highlighting all cells and un-filtering the column- this didn't work either.
It would basically say :
If (any cell in Row A) has text = "Deposit" (it needs to be exact, it can't be "containing"), set cell with the word "Deposit" and 4 cells to the right as Blue (I'm not picky about the color).
I am doing a spread sheet for to enter the times that i do in a rally.
So if i post a time of 00:49.3 and the target time is 03:54.3 i want the cell to turn red, or if the set time is less then the target time it should be green.
How can i do this in excel
Looking to use conditional formatting to highlight a cell based on the value of another.
I.E. Highlight Cell B2 if Cell A3 is 4 or greater.
INVENTORY-TRACKER.xlsx
I have a attached an inventory spreadsheet that I use at work. The only active column that gets data entered into it, is column E "Qty (Pcs)". I enter quantities of inventory in this column.
In column B is the part numbers for product. The letters at the end of the part numbers are associated with certain colors that you can see in the small chart to the right of the report. H=Yellow, M=Blue, S=Green, V=Orange and P=Purple.
What I am trying to achieve is when I type a value in the Qty (Pcs) row. I would love for the entire row that contains data to highlight in the respective color based on what letter is at the end of the part number in column B.
Example - I type 100 in E2 and the entire row of data turns Orange because the V at the end of 13001 is associated with Orange.
I need a macro to highlight a cell based on other cells.
For example:-
1. I wants to highlight A3 in red if all the cells from I3 to Y3 are empty.
2. I wants to highlight A3 in yellow if I3 is filled and J3 is empty
3. I wants to highlight A3 in green if if I3 is filled and J3 is also filled.
Actually I am having a grid which shows all the components of watch like KIt, case, dial , strap,hands.
The A row is purchase order no and then I3 and J3 belongs to KIt means if a po is not then I3 and J3 are empty so A3 is high Lighted in REd and if a po is placed then we put supplier name in I3 and it changes the color to yellow and when a po is confirmed we put confirmation date in J3 so A3 turns to green.
So in this way we can see if any Po is not yet placed or not yet confirmed based on cell color.
I want to track winning football teams by highlighting the victor. So lets say I have a cell that contains
Raiders @ Niners
and another cell containing "home" or "away" indicating the winner.
Based on the home/away cell, I want to either highlight Niners/Raiders.
Let's assume Cell A2, A3, A4, etc, only contain names/text.
Then let's assume I have set up cell B2, B3, B4, etc, to contain a percentage value based on a formula and some other entries I have made.
It should be simple, but I'm having trouble - how do I set up A2, A3, A4, etc, to highlight into different colours based on Column B's data/percentage falling into a certain range?
ie: - if B2 is between 0% - 25%, then highlight A2 green
- if B2 is between 26% - 50%, then highlight A2 orange
- if B2 is between 51% - 100%, then highlight A2 red
Say I have (cell A1) 10 salespeople and they each sell a (A2) $100/month membership, so I have (A3) $1,000 monthly revenue.
(A4) is an assumption about how many months the average person will stay a member.
So if A4 = 6, (6 month membership assumption) how would I get Excel to output $1,000 (the result from A3) into cells B3 through B8
but then for instance if A4 = 3 (3 month membership assumption) it would only output the the $1,000 result from A3 into cells B3 through B5
So like A1 through A4 of...
10
$100
$1,000
6
would output $1,000 into B3 through B8
but
10
$100
$1,000
3
would output $1,000 only to B3 to B5
Not very good at this but I have the basic sheet attached. All I want is a way to highlight the first cell when the date is within 30 days of the "Due date".
Calibration Record-example.xls
I am trying to find a way to automatically highlight all the cells specified by the cell references in a column on another worksheet (which will constantly have new values added).
On the attached sample, the 'Data Before' tab shows the base data before any highlighting. As cell references are added to the 'References' tab in 'column A' I want the respective cell to be highlighted on the 'Data Before' tab resulting in the 'Data After' tab and each time a new cell reference is added to the 'References' tab, the respective cell is then highlighted on the 'Data Before' tab.
I would like to have control over the highlight colour so that a different highlight colour can be specified for each date change, i.e. all cell references that are shown on the same date are the same colour but where the date changes a different highlight colour can be specified.
Highlight by Cell Reference.xlsx
I need a macro that will highlight a row based on a cell criteria. I have used conditional formatting but there is a lot to format and has dramatically slowed the sheet down. However, I know nothing about macros/vbas.
E.g. If it states JI sent then I want the whole row to be highlighted light green.
App form needed = peach
Waiting list = light blue
Cancelled = red font strikethrough
DNA = purple font strikethrough.
Also - it could well be that in the row it has App form received, JI Sent and DNA all in 1 go. So ideally I would want that row to be highlighted light green with purple font strikethrough.
Booking Status
JI Status
Date JI Sent
Attendance
Cancellation date
Chargable / non chargable Cancellations
Chargeable / non chargeable DNA
Date taken
Time taken
Event Title
Start Date
Time
App form received
JI Sent
[Code] ......
I looked around at some date functions and could not find one to work.
I have a sheet that has 365 days. When I load the sheet I want to cell for today to be highlighted in some way..... color or just active.
If date = 05-10-2007 then
BackgroundColor = 17
else
BackgroundColor = 9
end if
I want to highlight an entire column based on whether a cell in that column is equal to today's date.
I know how to write a loop that cycles through all of the columns until it finds today's date and then modify the column's properties, I was wondering if there was an easier way to do it. Also, I want the highlighting to be temporary meaning it should not save.
I trying to require data entry in Cell 2 if Cell 1 contains text. Normally Cell 1 is blank but once the user enters data (its a text field) I want Cell 2 to then become mandatory for data entry. (Cell 1 is actually C5 and Cell 2 is actually DK5. So formula I am thinking if is: If C5 contains data then DK5 must also contain data. If C5 is blank, the DK5 is also blank.
View 4 Replies View Related