From what I understand this is a simple process but since I am new to programming and I am in need of help. I am trying to write into one of my macros that as it is searching in the sheet if it finds CRL in column C and if it finds a value between -1 and 100,000 in column K, then it will highlight the entire row green.What can I do to add this into my macro?
View 14 RepliesI want to highlight an entire column based on whether a cell in that column is equal to today's date.
I know how to write a loop that cycles through all of the columns until it finds today's date and then modify the column's properties, I was wondering if there was an easier way to do it. Also, I want the highlighting to be temporary meaning it should not save.
MS Excel 2010, WinsXP
how to highlight an entire record based on the value of a single cell?
I would like to highlight all records grey where cells in a column = "closed".
I am trying to write a procedure to highlight entire rows in VBA based on a entry in column A.
I have the below which works for say 1000 rows but breaksdown when I have 58,000 rows which is the usual amount of data I will have.
Below is the code I have so far. It appears when I debug it breaks on the red line with type mismatch.
Option Explicit
Sub RemoveBH()
Application.ScreenUpdating = False
Dim intcount As Long
For intcount = Cells(1, 1).CurrentRegion.Rows.Count To 1 Step -1
[code].....
What I want to do is select all rows that contain the word conveyor in it. So far I have managed to select all the cells, I have also managed to select the entire row but one row at a time, I have even been able to turn all the cells a different color but I just want to highlight them for other formatting, copying, and several other things that need to be done. I have other documents this could be very useful in too so i want to make it a generic multi-line highlight rather than adding the formatting into the formula.
View 9 Replies View RelatedIs there a way to highlight and entire row automatically every time we select a cell on that same row?
I have 20 columns of data and it's a mess when when need to scroll to the left or right since I lose sight of the selected cell and then I can't see which the row I want to check.
i have it to where is highlighting a single cell i will like the macro to highlight entire row base on a single cell value.
View 2 Replies View RelatedCode that will highlight a entire row when a cell from a column has a value of 0. It will check all the cell from Column C1:C100 and check all the cells that contains a 0 value. Need to highlight the entire row that contains this cell value and fill it in orange color.
View 9 Replies View RelatedThe problem is when I highlight a row with some color the original color of the row is gone, so I tried this code, and again, it's removing the original format and color for the row This is the code from McGimpsey & Associates : Excel : Highlight row with background colors
Code:
PrivateSub Worksheet_SelectionChange(ByVal Target As Excel.Range)
Const cnNUMCOLS AsLong=256
Const cnHIGHLIGHTCOLOR AsLong=36'default lt. yellow
Static rOld As Range
Static nColorIndices(1To cnNUMCOLS)AsLong
Dim i AsLong
IfNot rOld IsNothingThen'Restore color indices
[code].....
How can I retain the range's historical color so that when I deselect the row it reverts properly?
Here's what i am trying to do... I have a workbook with lots of info, i believe there is a way to highlight an entire row and then run a macro that will then collect the info from certain columns (along the specific highlighted row) say, columns A-F and M & P for one example, the collected data will then be copied to a new pre-designed template, and pasted into set cells. The cells that the data will be pasted into will not be along one row though, the pre-defined template will resemble say, an application form Can this be done, I understand macros only at a basic level currently but am trying to understand the VBA way of creating them too now.
View 9 Replies View RelatedI want to see If A1 contains 0 or any number, and B1 or C1 has number greater than 1 it should highlight the entire row.
View 9 Replies View RelatedI am wanting a Macro or a VBA to look at all of my rows and completely highlight the row after 2 text values are found.
Example: Range A3: P:28, Find in Row A3:P3 that has "Text1" and "Text2"
in order to perform conditional formatting for entire row, if one condition satisfy for particular Cell then entire row should get highlighted.
View 5 Replies View RelatedI want to highlight an entire row of data if the text in column A begins with "ABC". I can't seem to get the conditional formatting formula correct. My data goes from column A to column O.
View 3 Replies View RelatedI have a range of data in Sheet1- if in column D the cell contains the word "Everyday" I need the entire row to be cut and pasted to Sheet2. Does anyone know of a way in which a macro could do this? I would need the entire row to be cut from Sheet1 and pasted into Sheet2.
View 3 Replies View RelatedI would like to sort rows from Sheets 2-6 based on the value in Column G into Sheets with the same name. For example, if a cell in column G states "BluePrint", I would like the entire row to be copied into the tab labeled "BluePrint".
however I have been unsuccessful in adapting the coding to my specific wording.
Based on the example and solutions from one of our friends post
http://www.excelforum.com/excel-prog...ell-value.html.
i want to know the code with the same data as posted in THAT example,changing the data slightly like adding "TODAY" & "TOMMORROW" as other key words which will be Cut/Copied as seperate groups one beneath the other.
I had attached the worksheet with the actual data & the final Required format.
I want to highlight an entire row based on the contents of of a particular cell. For instance, if c4 contains data, highlight the entire row 4. If c5 is blank, do not highlight the entire row 5...and on and on...
View 2 Replies View RelatedI have got a vacancy tracker spreadsheet and I need it to move an entire row from the 'Open' to the 'Closed' sheet based on the status in column K, i.e. 'Closed +', 'Closed -', and 'Closed + Achieve'. Once this has been done I want it to delete the entire row in the 'Open' sheet. At the moment it just cuts the entire row and then it is left blank and when I delete it manually the macro stops working completely.
Also I can only get it to move 'Closed +' and 'Closed -' and seem not to be able to add a command to move 'Closed + Achieve' rows.
This is what I have got so far:
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Columns("K")) Is Nothing Then Exit Sub
Application.EnableEvents = False
If Target.Value = "Closed +" Then
[Code] .......
I used this macro to find the duplicates in column B:
Sub KryDups()
ScreenUpdating = False
FirstItem = ActiveCell.Value
SecondItem = ActiveCell. Offset(1, 0).Value
Offsetcount = 1
Do While ActiveCell <> ""
If FirstItem = SecondItem Then
ActiveCell.Offset(Offsetcount, 0).Interior.Color = RGB(255, 0, 0)
Offsetcount = Offsetcount + 1
SecondItem = ActiveCell.Offset(Offsetcount, 0).Value
Else
ActiveCell.Offset(Offsetcount, 0).Select
FirstItem = ActiveCell.Value
SecondItem = ActiveCell.Offset(1, 0).Value
Offsetcount = 1
End If
Loop
ScreenUpdating = True
End Sub
The duplucate cells are now red in color. (RGB(255, 0, 0)). How do I now code VB to delete the rows in column B where the cell color is red? Here is some of the code that I tried:................
I have a macro that already works well but I need to make a change to it and I can't figure out how to do it.
I need so when the macro is run it will prompt the user for a date. After they enter the date it will highlight cells A:K on each row that data appers.
A little background for this. It is a schedule for a call centre which can show two to three weeks of schedules per agent. We rerun the macro each day to update break times and I would like it so it will highlight todays line.
I am using Excel 2010. I have a pivot table where I want to highlight the ENTIRE row where a certain cell value equals something.
In essence I want all the Material Subtotal Rows highlighted "Orange" But as you can tell from the picture below I am having issues with the Body of the Pivot table. I have the formula checking to find whenever it finds the word total to highlight it.
The example below is showing how I need the row to be formatted. I can get the Data (Units) section formatted no problem. It is just the other part of the pivot table that I cannot format.
For the columns from Material to SAP # I have been trying to use Dynamic Name ranges using the Offset function. However, excel turns that Name range to a range and if I filter the pivot table, it adds extra ranges to the Applies to box and starts to really mess it up.
I have a large set of data regarding the activities going on in particular rooms. The data contains activity name, start time, day, duration, room and size.
I would like to select all rows that contain a cell in the activity name column which contain the words 'VideoConference'.
I have tried to Search, Select All then index the remaining data using =iferror(index(etc. However some activities occur in more than one room and all variables apart from 'Room' are the same. Thus when I have tried to index the room column I get the same room for both rows.
ps the raw data set consists of +28000 rows so I can not simply look through and copy.
Monthly, I get a CVV of data with associated statistics. I'm generally only interested in rows with the first cell (A) containing specific words.
The cells (column A) are those such as below:
make a webpage free create web page free make a website with yellow pages how to create web page
So, if I wanted to take copy the rows where the cell contains the text 'create web page'. I want it to take 'create web page free' and 'how to create web page' and the cells in their respective row.
I would like these rows to be copied into a new sheet.
I have two sheets:
1. Not yet printed
2. Printed
My data is in sheet 1 (Not yet printed). I would like to move automatically entiry rows (sometimes more then one) to sheet 2 (Printed) based on one cell's value. Here is a screenshot:
For example when I enter into Sheet 2 '264450' then row 2 would have been moved to Sheet 2.
And also with multiple rows, if I enter '264461' then row 4 and row 6 would have been moved to sheet 2 as well. I wouldn't like to enter a value more than once.
I am trying to copy an entire row to another tab based on when a cell changes. The column where the change will come from in colum N. I am using this code based on what I have read on this board, but cannot seem to get it to work correctly.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim LC As Integer, iCol As Integer, Found As Range
iCol = 14 'column containing K
LC = Cells.Find(what:="*", SearchDirection:=xlPrevious, SearchOrder:=xlByColumns).Column
If Target.Column = iCol Then
Select Case Target.Value
[code]....
In the end what I would like to do is everytime there is a change in column N, the macro copies the information from that row into the other tab. I would like the information to overwrite anything that is alraedy in that tab as well. So if someone accidentally putc in a C instead of a K, it will not keep that information in the wrong tab.
Ok so Im working on Christmas functions and this is how my data base looks
Date
Name
Address
Seats
Price
Total
1/12/2013
James Fran
1 Bold street
4
£20
£80
[Code] ......
What I need to do is move all the dates onto their own worksheet, so every row containing 1/12/2013 would move to the worksheet 1.12.13, the 6/12/2013 would move to the worksheet 6.12.13 and so on.
Currently I have to copy and paste each row manually, which takes time. Any macro or formula which would do this automatically every time new data is entered. The main database, like above, will contain around 200 entries.
I need to make an entire column formatless if the cell in row 3 contains no text. I want the whole column to just appear like a normal formatless column, but if there is text in the row 3 cell, I want it to be the way I have it formatted right now.
View 1 Replies View RelatedI'm trying to come up with a macro that can delete an entire column based on formatting of the cells. Basically what I have is a range of cells, and if all cells in a particular column have no fill color, then delete the entire column.
View 9 Replies View RelatedI know it can delete entire rows based on the value of single cell, I just don't know how to do it. So what I need is a macro that will delete an entire row if the value in a particular column = 0.
More details: ....