VBA To Highlight Cells Downward Based On Column A Number
Aug 26, 2013
I would like to highlight the cells in Column A the have numbers in them. Starting with that number shift down based on the number that many rows and highlight them.
HTMLSheet1 *AB154020842*4020843*4020844*4020845*4020846*4020847*40208483
5010909*50109010*50109011*50109012*50109013*50109014*501090153
50112016*50112017*50112018*50112019*50112020*50112021*501120222
50206523*50206524*50206525*50206526*50206527*50206528*50206529450212430*50212431*50212432*502124
View 3 Replies
ADVERTISEMENT
Feb 25, 2008
I am attempting to have a cell highlighted if the adjacent cells are visible, but no highlighting when the cells are hidden. For example, Cell D1 is highlighted when cells A1:C1 are visible, but not when cells A1:C1 are hidden. (this is for the group/outline feature)
View 3 Replies
View Related
Jul 28, 2014
need to understand the easiest way of highlighting the highest and lowest number in a range of cells several times in the same column.
As I said the cell range will be in the same column. So highlight the highest number green and lowest number red in cells a3 to a9 and then repeat the same process again in cells a11 to a17 and so on.the cell references are an example.
So I have several separate sets of numbers in the same column.
View 3 Replies
View Related
Apr 14, 2014
I am trying to find a solution for highlighting cells in a column that are repeats, ie. >3. I also need these cells to only be highlighted if the adjacent cell in the next column contains specific text. I have tried using conditional formatting with a countifs formula to no avail.
View 2 Replies
View Related
Sep 5, 2013
I need formatting to highlight the dates in Column H if they are a greater than a week or more from Column G. Tried some different ways of doing this with the conditional formatting but cannot get it to work yet
View 12 Replies
View Related
Nov 10, 2011
How do I make a row highlight based on a given number in a cell...
For example my spreadsheet has a balance column...when the balance shows 0.00 for that line i would like it to hightlight gray
View 1 Replies
View Related
Sep 16, 2005
I have 18 columns of numbers, I need to figure out how to highlight the lowest number in each column, only if it is a unique value... in other words, only if it doesn't match any other number in that column. I'd also like that number somehow paired up with it's row's indentifier and put somewhere in a report.
View 9 Replies
View Related
Jan 19, 2014
I am trying to highlight a cell based on two randomly generated number, one is the column and the other is the row. Based on those values I want to change the color of a cell in a range of data. The formula I am using does not work like I intended. It only changes the cell once I enter a value in the cell not until. =OFFSET(A1,B27,B26). B26 and B27 are the cells housing the random numbers and A1 is the base reference.
View 1 Replies
View Related
Aug 24, 2013
I have sheet 1 and in c3
d3
1st
copy
[Code]....
this two column compare for duplicates and I manage to highlight (actually not bold) the number that is duplicate but I dont want to highlight the 2nd, 3rd & so on duplicate number in c3 (highlight 1 only from the 3 numbers most of the times got 2 only) . (row start from c3 to c2000 and d3 is up to d2000 also). I already use CF for highlighting the duplicate in C3 which my formula in CF is
=IF(ISERROR(MATCH(c3:c3,$c$3:$c$780,0)),"",c3:c3) I just try to do this formula and it works, but I dont know how to command not to highlight the 2nd, 3rd & so on duplicate number in C3 (C3 only can have duplicate number within the column; D3 doesn't have any repeat number in the D column.
I need to do the same formula command for other 2 partner columns (compare for duplicates this two columns & the 1st column if have to many duplicates highlight the first number that have more than 1 duplicates only) cells need to do again is for E3 & F3; G3&H3; until AU3&AV3..
is it possible to count how many highlighted cell (not bold) there is in a column (I mean total highlighted cell) and put the answer in cell C1, E1, G1, I1 ... AS1 , AU1. Tq again..
View 9 Replies
View Related
Aug 23, 2013
I have sheet 1 and in
c3
d3
1st
copy
1347
0934
[Code] .......
This two column compare for duplicates and I manage to highlight (actually not bold) the number that is duplicate but I dont want to highlight the 2nd, 3rd & so on duplicate number in c3 (highlight 1 only from the 3 numbers most of the times got 2 only) . (row start from c3 to c2000 and d3 is up to d2000 also). I already use CF for highlighting the duplicate in C3 which my formula in CF is
=IF(ISERROR(MATCH(c3:c3,$c$3:$c$780,0)),"",c3:c3)
I just try to do this formula and it works, but I dont know how to command not to highlight the 2nd, 3rd & so on duplicate number in C3 (C3 only can have duplicate number within the column; D3 doesn't have any repeat number in the D column.
I need to do the same formula command for other 2 partner columns (compare for duplicates this two columns & the 1st column if have to many duplicates highlight the first number that have more than 1 duplicates only) cells need to do again is for E3 & F3; G3&H3; until AU3&AV3..
is it possible to count how many highlighted cell (not bold) there is in a column (I mean total highlighted cell) and put the answer in cell C1, E1, G1, I1 ... AS1 , AU1. Tq again..
View 4 Replies
View Related
Mar 17, 2014
Please see attached sample worksheet. Column A will be generated by the user manually.
I'm looking for a way in VBA to have A1:D20 in Sheet2 copied and pasted in the "Bank Reconciliation" Sheet based on how many "Markets" there are in Column A. Then, once that's complete to have A22:D30 (the smaller box in Sheet2) copied and pasted directly below those results.
I have what the macro would hopefully generate to the right in "Bank Reconciliation" (B6:E54) as an example. So if there's a market in A1, copy and paste the box to B6. If there's a market in A2, copy and paste the box directly below the first (B26) etc. etc. until it's done, then paste the smaller box directly below whatever the macro generates.
Book2.xlsx‎
View 3 Replies
View Related
Dec 7, 2008
I'm really struggling to achieve the following:
I have 75 rows and 10 columns populated with numbers (assume its A1 to J75 but it could be anywhere).
Firstly, if any of the numbers in a column are > 10 then I want to highlight all of the numbers in the column (even those
View 9 Replies
View Related
Mar 17, 2008
How can I use conditional formating to produce the following:
if cells are between 0 and 10 OR they have text(or an error) = red
if cells >10<25 = orange
if cells > 25 = green
View 3 Replies
View Related
Jun 21, 2014
I want to enter a unique ID into an input box which will tell which row that id is available and then it will again ask me which column the cell needs to be highlighted. Once i enter the data, it will then ask me what is the change in data (again via input box). i can then enter the change data and then it stops.
View 1 Replies
View Related
Mar 13, 2008
I have been reading and searching on how to get around Excel's limit of 3(or 4) conditional formatting rules with VBA.
I have a pretty good grasp of what the code is telling the system to do, however what I am not understanding is how can I have the Code check multiple sets of columns?
ex Columns A,B and C Rows 1:100 need to be checked if they are between a particular range and clolums D,E, and F need to be checked against a completely different set of criteria.
I tried cutting and pasting the Sub, changing the Range values and the conditions, but it always errors out.
View 5 Replies
View Related
Jan 16, 2014
I have a spreadsheet with month names in column A10 and down and want to highlight the row based off a cell(which will be A3) so if cell A3 = Nov it would highlight all rows that have Nov in column A. I don't want to highlight the entire row just columns A.
View 5 Replies
View Related
Aug 23, 2007
I need VBA help. I know how to highlight every other row but what I can't do is highlight a row if column values are the same. For example I have 5 columns but only the first one has the data I'm interested in. If the data in the first column looks something like this:
1
2
3
4
4
5
5
5
6
6
6
7
.
.
I want to highlight every other row that has similar values therefore I want to highlight row 2, both row 4s, and three 6s...etc.
I also want it to start on the 2nd row of every page until the last row of every page which is row 37 in my case.
View 9 Replies
View Related
Mar 28, 2014
I hope this can be done through conditional formatting because I am not familiar with macros.
Column A - order #
Column B - shipping method (this will only be air, sea, or blank; I get this through VLookup)
Column C - order ETA
I want to highlight Column C..... if Column B=Air highlight if ETA is in 2 weeks or less; if Column B=Sea or is blank highlight if ETA is in 5 weeks or less.
View 14 Replies
View Related
May 29, 2012
I am trying to write a procedure to highlight entire rows in VBA based on a entry in column A.
I have the below which works for say 1000 rows but breaksdown when I have 58,000 rows which is the usual amount of data I will have.
Below is the code I have so far. It appears when I debug it breaks on the red line with type mismatch.
Option Explicit
Sub RemoveBH()
Application.ScreenUpdating = False
Dim intcount As Long
For intcount = Cells(1, 1).CurrentRegion.Rows.Count To 1 Step -1
[code].....
View 7 Replies
View Related
Jun 9, 2009
I want to highlight an entire column based on whether a cell in that column is equal to today's date.
I know how to write a loop that cycles through all of the columns until it finds today's date and then modify the column's properties, I was wondering if there was an easier way to do it. Also, I want the highlighting to be temporary meaning it should not save.
View 9 Replies
View Related
Aug 31, 2012
I need a macro to highlight a cell based on other cells.
For example:-
1. I wants to highlight A3 in red if all the cells from I3 to Y3 are empty.
2. I wants to highlight A3 in yellow if I3 is filled and J3 is empty
3. I wants to highlight A3 in green if if I3 is filled and J3 is also filled.
Actually I am having a grid which shows all the components of watch like KIt, case, dial , strap,hands.
The A row is purchase order no and then I3 and J3 belongs to KIt means if a po is not then I3 and J3 are empty so A3 is high Lighted in REd and if a po is placed then we put supplier name in I3 and it changes the color to yellow and when a po is confirmed we put confirmation date in J3 so A3 turns to green.
So in this way we can see if any Po is not yet placed or not yet confirmed based on cell color.
View 9 Replies
View Related
Sep 7, 2009
I have 3 data series, which are each futures contracts. Each of these futures contracts (the one on the left expires soonest) has an expiration date and as that date approaches, one will need to replace it with a new futures contract (the data series immediately to its right) having a later expiration date. This process is called a ‘roll’. I am seeking to create a continuous data series, which will incorporate the appropriate ‘roll’ based on two rules.
The rules are as follows:
1) Where the volume of the 2nd contract exceeds the volume of the 1st contract for 10 consecutive intervals, roll on that date.
2) Once the roll date has been identified, roll at the specific time interval on that date that has the highest aggregate volume (between the 1st and 2nd contract).
I have laid out the original data in a tab entitled ‘original data stream’. This is how the data will appear at first. In the tab entitled ‘Roll Example’, I have shown what I would like to happen to the original data streams. You will notice that in this tab, the data series are the same as the previous tab, except that they are not aligned as before. The data series to the left ( cells B4: D808) expires ..................................
View 9 Replies
View Related
Aug 4, 2014
Abc500
abc-500
bbb300
bbb250
cac100
cac-100
ddd200
ddd300
fff-500
I want to be able to highlight data in column B where amount is identical (ignore negative sign) only where data in column A is identical.
In this particular case it should highlight 500,-500 where data in column A = ABC & also 100,-100 where data in column A =CAC.
View 2 Replies
View Related
Jul 9, 2009
I have a worksheet with 20+ columns. For this macro, I only need to focus on 4 of them. However, none of these columns are ever in a fixed position so the macro would need to find them by name and NOT by column position. Here they are...
1. Vacation Type (will only have a text value of either "Cold" or "Warm")
2. Vacation Started (will always have a date *x/xx/xxxx)
3. Vacation Ended (sometimes it will have a date '*x/xx/xxxx' and sometimes it will NOT have a date and will be truly blank)
4. Number of Days (currently has ALL truly blank cells)
THIS WHOLE MACRO SHOULD NOT BE CASE SENSITIVE ANYWHERE
Here's what I would like the macro to do...
Scenario 1 - for "Cold" values
Find "Cold" text values in the "Vacation Type" column
"Cold" values WITH a date in the "Vacation Ended" columnIF there IS a date in the "Vacation Ended" column in the same row, put the number of days difference between the "Vacation Started" column and "Vacation Ended" column in the "Number of Days" column.
The amount of days in the "Number of Days" column will determine whether these cells should be highlighted GREY or RED.
A) IF the number of days difference is 7 days or less, highlight the cells in the "Vacation Ended" column and "Number of Days" column RED.
OR..............................
View 12 Replies
View Related
Mar 9, 2013
I have a list of names in Column B (Starting at B5) with assignments to them in Column A. I want the people who receive the file, to enter their name in B1 exactly as it appears multiple times in sheet. And hope to use conditional formatting to highlight (change the back ground color) of each cell their name appears in.
I've used a number of formulas in the Conditional formatting including "=(ISNUMBER(MATCH($B5:$B100,$B$1,0)))", Countif's and "Not(isnumber)..." but can't find a formula that picks up the whole text.
View 3 Replies
View Related
May 27, 2014
I am trying to find a way to automatically highlight all the cells specified by the cell references in a column on another worksheet (which will constantly have new values added).
On the attached sample, the 'Data Before' tab shows the base data before any highlighting. As cell references are added to the 'References' tab in 'column A' I want the respective cell to be highlighted on the 'Data Before' tab resulting in the 'Data After' tab and each time a new cell reference is added to the 'References' tab, the respective cell is then highlighted on the 'Data Before' tab.
I would like to have control over the highlight colour so that a different highlight colour can be specified for each date change, i.e. all cell references that are shown on the same date are the same colour but where the date changes a different highlight colour can be specified.
Highlight by Cell Reference.xlsx‎
View 9 Replies
View Related
Apr 6, 2014
How do I get the cells in column "F" to highlight all negative numbers UNLESS the following 2 conditions are met: the number in column F = "-105" AND there is an "@" corresponding in column "C". In the attached file F5 & F7 are highlighted properly according to what I want, but F6 is not (since F6's value is "-105" AND C6's value contains an "@").
View 7 Replies
View Related
Jul 2, 2014
How do I select or highlight cells from row 1 through row x (a numeric variable) in column A? I'm eventually hoping to shift those cells in column A (from row 1 to x) to the right by one.
View 1 Replies
View Related
Feb 28, 2013
I would like to know how I can have a macro run on an excel sheet of mine.
I have a little database with a few names and email addresses submitted to me via web.
But some people tried to register to my services TWICE with a different name, but same email address (not smart eh)
I would like to run a macro on a column and have it search for duplicate values and highlight them in... blue perhaps.?
P.s. the column format is set to 'TEXT'
View 2 Replies
View Related
May 1, 2014
how to highlight C2 IF any cell in C4:C20 contain a certain value. if so, what is the formula for the rule?
View 1 Replies
View Related
