I want to track winning football teams by highlighting the victor. So lets say I have a cell that contains
Raiders @ Niners
and another cell containing "home" or "away" indicating the winner.
Based on the home/away cell, I want to either highlight Niners/Raiders.
I want to enter a unique ID into an input box which will tell which row that id is available and then it will again ask me which column the cell needs to be highlighted. Once i enter the data, it will then ask me what is the change in data (again via input box). i can then enter the change data and then it stops.
View 1 Replies View RelatedJust "upgraded" my Excel to the 2007 version. In the old Excel, I could superscript part of a cell by highlighting the part I want, then going to "Format" and "Superscript."
In Excel 2007, it doesn't work. Yes, I can highlight the part of the cell I want to superscript, I can right-click and select "format" and "Superscript", and it even then shows as superscripted in the cell. That is, until I hit enter or move to a new cell. Then the superscript is no longer there. The cell is in "general" number format.
By the way, it did work in another cell: mg/l3 (3 superscripted) works. 742 (2 superscripted) doesn't work.
I want to highlight part of a row ie I25-P25 if a specific cell in that row is 0 (O25) Cant figure out a formula to do this.
View 1 Replies View RelatedI'm creating a worksheet that gives a list of part numbers based on the product part code. In most cases I can use the following.
=LOOKUP(O6,{0,1,2,3,4},{"NONE (M25)","SMP-55-001","SMP-55-004","SMP-55-008","SMP-55-014"})
so this gives a part number depending on what number is placed in O6. What I need to do know is look at 2 different cells and for each combination of numbers give a different part number. so if A1 is 2 and B1 is 3 give a certain result.
VBA code to use input box result in a Concatenate function.
Sub test()
Dim DistName
DistName = Application.InputBox("Enter District Name")
ActiveCell.FormulaR1C1 = "=CONCATENATE(R[-2]C[1],"" Diabetes Dist"")"
End Sub
I want to replace R[-2]C[1] with the result from the input box.
i have a column of data part number part text e.g 7w1,8b1 in the next column i want to write a function that will look at the other and dependant on whats in it place a word e.g. for 8b1 i need it to look at the "b" and enter beauvale if theres no "b" but a "w" enter wollaton, i have tried an if function and used "*b*" but it doesnt seem to like wildcards ....
View 9 Replies View RelatedI am using excel 2000. I want to apply conditional formatting to a range of cells if they contain (V) as part of the cell contents. The cells will generally look like this : 09.00-6 (V) or 9-5.30 (V). I want to shade any cell if part of the contents of that cell is (V).
View 2 Replies View RelatedWhat I would like to do is remove part of an email address from a cell.
Ex. if the was a cell that contained "someone@somewhere.com" I would like to make that cell only contain "@somewhere.com"
I have a paragraph that i am trying to change a number in the paragraph. example
John has 3 kids he sells one kid he has 2 kids left. Later John's wife figures out and kills John 4 times.
I am trying to replace the "4" to an imputed on an user fourm imput box can i do this?
I have a macro that already works well but I need to make a change to it and I can't figure out how to do it.
I need so when the macro is run it will prompt the user for a date. After they enter the date it will highlight cells A:K on each row that data appers.
A little background for this. It is a schedule for a call centre which can show two to three weeks of schedules per agent. We rerun the macro each day to update break times and I would like it so it will highlight todays line.
I have a spreadsheet with four columns of text.
In column A, i have multiple levels followed by a letter (i.e. Level 1A, Level 1B etc).
In column B, i have some other details and then so on and so forth.
In column C/E/G lets say, i want to copy the information from column A to show only items that appear as "Level 1" (not "Level 1A", i only want it to check for things without the letter at the end). Then the same in column E but with "Level 2" and so on and so forth.
Column A...Column B-Column C...Column D--Column E...Column F--Column G...Column H
Level 1A....Metals----Level 1A....Metals ---Level 2A....Integral---Level 3A....Television
Level 1B....Energy----Level 1B....Energy--- Level 2B....Flowers---Level 3B....Kitchen
Level 1C....Synergy---Level 1C...Synergy--Level 2C....Full
Level 2A....Integral---Level 1D....Orders
Level 2B....Flowers
Level 1D....Orders
Level 3A....Television
Level 3B....Kitchen
Level 2C....Full
I also have data in Column B that is to do with column A (i.e "Level 1A" - "Metals") and so on with the following columns. I want the items that are in column B to also move over to column D when the things from Column A move to Column C, so at the end it will appear as below so it appears as above.
I want to highlight A1 red if C1 is greater than 55. Is this possible?
View 3 Replies View RelatedFrom what I understand this is a simple process but since I am new to programming and I am in need of help. I am trying to write into one of my macros that as it is searching in the sheet if it finds CRL in column C and if it finds a value between -1 and 100,000 in column K, then it will highlight the entire row green.What can I do to add this into my macro?
View 14 Replies View RelatedHow can I highlight data based on another cell in the same row?
Ex. I only want to Select data in Column C only if Column B = Rm2
A B C D
1 Bob Rm1 x 0
2 Jack Rm1 x 0
3 Dean Rm2 n 0
4 John Rm2 n 0
5 Barb Rm3 x 0
I am seeking assistance with code for column H to be highlighted when I have a value of "Pending" or "Work In Progress" is present in column E?
View 3 Replies View RelatedI'm wondering if it is at all possible to have a cell comment automatically update depending on what data is input in the cell (via user input, VLOOKUP, etc.)?
For example, if cell A1 contains the text "CHARLES" with a comment saying "Employee of the Month", and is then subsequently updated with the new text "JOHN" (again, via direct input, a VLOOKUP, data validation, etc.) is there a way to have the comment automatically update to say something else, such as "Team Lead" for example?
I've considered using VBA to accomplish my goal, but am unsure how to compose an effective code to do so. I've also considered perhaps creating a named table filled with all the different comment possibilities I would like to have used in this cell and then inputting a formula in either cell A1, or the comment contained therein, that would then call the corresponding text from that table based on the data in cell A1. Honestly, I'm not sure that what I'm trying to do is even possible;
I have a spreadsheet where if Cell A2 says "Deposit", Rows A2-E2 would be formatted with a Blue background.
I've tried conditional formatting, but I can't built it into a Macro (I can't make it run), and it only highlights the cell that has that value. I also tried having the spreadsheet filter down to only the values I want highlighted, then highlighting all cells and un-filtering the column- this didn't work either.
It would basically say :
If (any cell in Row A) has text = "Deposit" (it needs to be exact, it can't be "containing"), set cell with the word "Deposit" and 4 cells to the right as Blue (I'm not picky about the color).
Looking to use conditional formatting to highlight a cell based on the value of another.
I.E. Highlight Cell B2 if Cell A3 is 4 or greater.
INVENTORY-TRACKER.xlsx
I have a attached an inventory spreadsheet that I use at work. The only active column that gets data entered into it, is column E "Qty (Pcs)". I enter quantities of inventory in this column.
In column B is the part numbers for product. The letters at the end of the part numbers are associated with certain colors that you can see in the small chart to the right of the report. H=Yellow, M=Blue, S=Green, V=Orange and P=Purple.
What I am trying to achieve is when I type a value in the Qty (Pcs) row. I would love for the entire row that contains data to highlight in the respective color based on what letter is at the end of the part number in column B.
Example - I type 100 in E2 and the entire row of data turns Orange because the V at the end of 13001 is associated with Orange.
How do I make a row highlight based on a given number in a cell...
For example my spreadsheet has a balance column...when the balance shows 0.00 for that line i would like it to hightlight gray
I need a macro to highlight a cell based on other cells.
For example:-
1. I wants to highlight A3 in red if all the cells from I3 to Y3 are empty.
2. I wants to highlight A3 in yellow if I3 is filled and J3 is empty
3. I wants to highlight A3 in green if if I3 is filled and J3 is also filled.
Actually I am having a grid which shows all the components of watch like KIt, case, dial , strap,hands.
The A row is purchase order no and then I3 and J3 belongs to KIt means if a po is not then I3 and J3 are empty so A3 is high Lighted in REd and if a po is placed then we put supplier name in I3 and it changes the color to yellow and when a po is confirmed we put confirmation date in J3 so A3 turns to green.
So in this way we can see if any Po is not yet placed or not yet confirmed based on cell color.
Let's assume Cell A2, A3, A4, etc, only contain names/text.
Then let's assume I have set up cell B2, B3, B4, etc, to contain a percentage value based on a formula and some other entries I have made.
It should be simple, but I'm having trouble - how do I set up A2, A3, A4, etc, to highlight into different colours based on Column B's data/percentage falling into a certain range?
ie: - if B2 is between 0% - 25%, then highlight A2 green
- if B2 is between 26% - 50%, then highlight A2 orange
- if B2 is between 51% - 100%, then highlight A2 red
Not very good at this but I have the basic sheet attached. All I want is a way to highlight the first cell when the date is within 30 days of the "Due date".
Calibration Record-example.xls
I am trying to find a way to automatically highlight all the cells specified by the cell references in a column on another worksheet (which will constantly have new values added).
On the attached sample, the 'Data Before' tab shows the base data before any highlighting. As cell references are added to the 'References' tab in 'column A' I want the respective cell to be highlighted on the 'Data Before' tab resulting in the 'Data After' tab and each time a new cell reference is added to the 'References' tab, the respective cell is then highlighted on the 'Data Before' tab.
I would like to have control over the highlight colour so that a different highlight colour can be specified for each date change, i.e. all cell references that are shown on the same date are the same colour but where the date changes a different highlight colour can be specified.
Highlight by Cell Reference.xlsx
I need a macro that will highlight a row based on a cell criteria. I have used conditional formatting but there is a lot to format and has dramatically slowed the sheet down. However, I know nothing about macros/vbas.
E.g. If it states JI sent then I want the whole row to be highlighted light green.
App form needed = peach
Waiting list = light blue
Cancelled = red font strikethrough
DNA = purple font strikethrough.
Also - it could well be that in the row it has App form received, JI Sent and DNA all in 1 go. So ideally I would want that row to be highlighted light green with purple font strikethrough.
Booking Status
JI Status
Date JI Sent
Attendance
Cancellation date
Chargable / non chargable Cancellations
Chargeable / non chargeable DNA
Date taken
Time taken
Event Title
Start Date
Time
App form received
JI Sent
[Code] ......
I am trying to highlight a cell based on two randomly generated number, one is the column and the other is the row. Based on those values I want to change the color of a cell in a range of data. The formula I am using does not work like I intended. It only changes the cell once I enter a value in the cell not until. =OFFSET(A1,B27,B26). B26 and B27 are the cells housing the random numbers and A1 is the base reference.
View 1 Replies View RelatedI looked around at some date functions and could not find one to work.
I have a sheet that has 365 days. When I load the sheet I want to cell for today to be highlighted in some way..... color or just active.
If date = 05-10-2007 then
BackgroundColor = 17
else
BackgroundColor = 9
end if
I want to highlight an entire column based on whether a cell in that column is equal to today's date.
I know how to write a loop that cycles through all of the columns until it finds today's date and then modify the column's properties, I was wondering if there was an easier way to do it. Also, I want the highlighting to be temporary meaning it should not save.
I am using data validation to restrict the number of Characters a user can input in a range of cells. The number of characters in this however can vary based on which selection they selected in a different cell.
To put this as an example, if the user selects "hello" in cell a1, the data validation would allow 10 letters in the cell range c1:c20. If the person selects "goodbye" in cell a1, then the validation would only allow 7 characters in cell range c1:c20. I have been using the worksheet Change function, however it updates the validation regardless of what cell is changed.
