to create a button,then I choose the row that I want the data to be move down..For example,when I choose the row 20,the data from row 21 to 30 will move down,and 31-40 will move down and so on....so that from row 21-30,there will be empty....
View 9 RepliesI have two worksheets. Sheet 1 has 2 columns, Column A the restaurant's name and Column B contains the review score. So sheet 1 is kinda like this:
Restaurant |Score
Ruby Tuesdays 80
TGIF 78
Outback 92
Sheet 2, Row 1 column B-E contain restraurant names (only on the top row, like field names).. i.e. I manually put the date in because typically the projected date is different from the actual review date.
-A----------- B ----------------C ------D-------- E-----
Date |Ruby Tuesdays|Olive Garden|TGIF|Ruths Chris|
I need the data from Sheet 1 Column B moved to sheet 2 in the next open row (i currently have data in row 1..the field names and down to row 35). This will be continuous so each time i need it to add the score as a new row in the correct field (restaurant name), IF the restaurant isnt listed, I want a new field named with the restaurant name and then place the score in the correct row and column. So, in the example I'd need Outback added.
I am working on a project and would like to see if there is a solution for it. i have a workbook that has data entry that is summarized at a master level but I need to automatically use a formula to update another sheet after clicking an udpate button. The data from the data entry sheet needs to be allocated to all the lines that has the same master item based on the formula. A test workbook is attached ...
View 1 Replies View RelatedI have an month input in cells B2 (user can enter values from 1-5)
I then have a data table that has month 1,2,3,4,5 running across range G9:K9. the data is held in range G10:K19.
So if user types in 4 in B2, what should happen is that months 1,2,3 and 4 the data for these months should be cleared and data in month 5 moves forward into month 1.
So basically, anything left of the month entered is B2 should be cleared and replaced with anything right of the month in B2.
1
2
3
4
5
£11
£133
£29
£193
£100
[Code] ........
formula to make data on same line.On converting data2 is above data 1. I insert a column on left . Need to use mouse right click shortcut delete manually shift cells left and then delete shift cells upto have both data on same line but should be in different cells and same sequence per attached ALSO TO REMOVE "/ -DASH HYPENS.
What I need is formula to move the data2 on same alignment and to delete the two empty rows between both data.
See annexed file for expected results.I have preference to have a formula much more.
I have names is Column A (about 200) and names in Column B (about 800) along with additional info in other columns. Column A was just added to an existing spreadsheet and will be deleted once I accomplish my task. The goal is to come up with the 200 names in column A along with the additional info in the other columns (address, phone) and to delete all of remaining names in B (about 600, 800-200) I'm trying to figure out the most efficient way to do this. I'm not sure if there is a function to match the text in Column A to Column B and at the same time move the row in Column A to match the row the name is located in Column B.
For example John Smith is currently in A1 and John Smith is in B7 and then John's phone number is in C7. I want the John Smith in A1 to move to A7. If I can make that happen for all 200 names I will then delete all rows with no entry in column A.
I have an excel spreadsheet,I have a problem and I need a macro , in sheet1 I have several values of 7 numbers in a cell, example 1|2|3|4|5|6|7| up to 93|94|95|96|97|98|99|, which can be found on the columns A, B, C, D, E, F, G, H, I, and I want for example to extract all values that begin with the number 1 ,and to put all the values in the worksheet 2 columns A, B, C, D, E, F, G, H, I,,
For example 1|2|3|4|5|6|7| ,,,,,, up to 1|94|95|96|97|98|99| moved in sheet2 from sheet1.
I tried to extract the filter from the data tab .... sort and filter,,, filter,,,, filter by number,,,, starting with,,,, we apply the filter, but when we selected data values and take that were among the selected what was not good.
I like this :
column A 1|2|3|4|5|6|7| , 21|25|32|43|51|60|73|, 1|2|3|4|52|69|78| ,11|12|30|45|50|61|79| ,3|5|70|74|75|77|79| , 1|22|33|44|50|63|75|, 1|22|33|44|50|63|75|................
column B 1|2|3|4|5|6|23| , 1|2|3|4|5|6|8| , 1|2|3|4|5|6|9| , 1|2|3|4|5|6|10| , 11|21|31|40|52|61|70| , 9|2|3|4|50|68|70| , 1|12|13|24|51|60|77| ,.........
column C 1|2|3|4|50|65|70| , 2|5|7|9|10|16|37| ,5|8|9|14|15|26|67|,,,,,,,,,,,1|94|95|96|97|98|99|.
In these columns I want to extract all values that begin with nr1 .....1|2|3|4|5|6|7|,,,1|90|91|92|93|94|95| from sheet1 in the sheet2, I mean these...
column A 1|2|3|4|5|6|7| ,1|2|3|4|52|69|78| ,1|22|33|44|50|63|75| ,1|20|31|43|55|60|71|
column B 1|2|3|4|5|6|23| , 1|2|3|4|5|6|8| , 1|2|3|4|5|6|9| , 1|2|3|4|5|6|10| ,1|12|13|24|51|60|77|
column C 1|2|3|4|50|65|70| , 1|94|95|96|97|98|99|
I am having problems placing data from one worksheet into another. I have 3 worksheets named, VAT Sales, VAT Purchases and VAT Return. I need to place data from VAT Sales worksheet cell L54 into VAT Return worksheet A1.
In the selected cell, A1 in VAT Return worksheet I have typed in the formula =VAT Sales!L54 but when I press return the My Documents window pops up. If I cancel, the error #NAME appears.
I have experimented just using the worksheet names Sheet1, Sheet2 and Sheet 3.
Using the formula =Sheet1!L54 in Sheet3 the data from Sheet1 L54 is placed in the selected cell with no problem.
Does this mean my spreadsheet cannot recognise my own worksheet names unless they are the default names of Sheet1 , Sheet2 etc??
The attached workbook has formulas that will return data from category sections that will grow and contract over time.
While it tells me that the total price of the "Active Overdue Customers to be Scheduled" section is 4119...I would like to determine how many in that section also have "Dunn" under the "Company" column.
Every section does not have the "Company" column, and "Company" is located in different columns in different sections.
I have large information scattered all over worksheet. If I want to move all data in one column "A" how can I do it?
View 2 Replies View RelatedI'm trying to adapt a macro written elsewhere on this forum for my purposes. I need to move 127 rows of data into one row. The macro written does exactly what I would like, except that it only works for 3 rows, rather than 127. How do I get this to work?Here's what I have so far:
[Code].....
I need a macro to take data from A2:F47 and clear this data. Then move it to A49:F235. I will be doing this several times and I want to save all of the data to A49:F235. I'm very new to Excel and VBA. I can move the data and clear it, but it writes over the data already there in A49:F235.
View 4 Replies View RelatedI have data in multiple columns like this:
http://spreadsheets.google.com/ccc?k...rEspkRfQWMOTUg
I'd like to move all data to one single column (like column #1)
Can someone help me out with a VBA macro ?
Date
Product
Pass
Fail
Repair
Group Product 1
P
F
R
Group Product 2
P
F
R
Group Product 3
[code]....
I currently have raw data in Sheet 2
On sheet 1 would like to get the summary of the data as posted in the picture... unfortunately there are "groups" in the raw data and I need them separated and conformed to get an accurate picture.
I have a file which contains multiple worksheets. The applicable worksheets for my question are: "NJSS", "NJSS2","NJSS3 and SHORT FORM." NJSS is pictured below. NJSS2 and NJSS3 look identical.
NJSS
******** ******************** ************************************************************************>Microsoft Excel - Trial5.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutK15L15M15N15O15P15Q15R15S15=
KLMNOPQRS11Luminaire*Description#*of*LuminairesWatts*per*LuminaireConnected*Watts[K*J]Composite*Connected*Watts/Square*Foot[SL/SB]Incentive*margin*[F-M]*(If*less*than*zero,*enter*0;*no*Incentive)*Lighting*Level*Incentive[SB*N*$1]**Fixture*Maximum*Incentive{SJ*$30]*Program*Incentive[Enter*lesser*of*O*or*P]121314*********1500#N/A#N/A#N/A#VALUE!#VALUE!*$********-***#VALUE!NJSS*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
I have a spreadshhet with values in columns D to G. I would like VBA code that will move the values in columns E to G to column D, up to the row before where the text Current Month Total appears in column B. No data must be moved from the rows after where the text "Current Month Total" appears in column B.
if i have data across multiple rows than is it possible to analyze that data in say row 1 and once row 1 ends move to row 2. example
Array Data
Colmn A B C D E
Row1: 3 1 4 6 8
Row2: 6 7 8 9 10
Row3: 4 5 1 2 8
Row4: 6 4 3 2 1
Row5: 2 4 1 2 2
OutPut Format
Colmn F
Row 1: Age is 3
Row 2: Always Same - Note this appears even though not part of data
Row 3: Year is 1
Row 4: Time is 4
Row 5: Hour is 6
Row 6: Minute is 8
Row 7: !
!Not Part of Output Comment: Now row 1 data has ended. Move to Row 2!
Row 8: Age is 6
Row 9: Always Same - Note this appears even though not part of data
Row 10: Year is 7
Row 11: Time is 8
Row 12: Hour is 9
Row 13: Minute is 10
!
etc
etc
etc
also note that the text that comes up in each row is not part of the data portion. Its just the number or string that gets pulled from the data portion.
I copy data from word document to Excel and it will look like this:
Name
Address1
Address2
phone
fax
e-mail
website
I have like 500 sets of this above data.
When I copy & past to Excel, it is all populated into Column A.
But I wish to put Name in Column A
Address1 in Column B
Address2 in Column C
etc.
I have a spreadsheet that I need to "relocate" data in. I need to take all of the narratives and want to move it to the far right so that it shows up in column "Q" I was hoping to be able to insert it and fill down, can this be done? ...
View 9 Replies View RelatedHow can I move data from one worksheet and place in another worksheet in the appropriate column? I exported data from Access to Excel in order but I need to group the data in excel.
View 3 Replies View RelatedI created a macro that is supposed to copy the contents of about 500 rows, and move them all up one row. One of the things that is contained in those rows are a bunch of links to Microsoft Word documents. When I try to move the 500 rows up manually (just copying, and pasting one row higher), it works fine. The link remains entact.
However, when I use the macro I recorded, the link no longer works. It looks like it is there (the text used to represent the link is there), but when you click on it, nothing is there. Here's my code....
I have attached a sample file and would like to have the expected format as shown in the attached. Would greatly appreciate if someone could show me the faster way of reformating the data instead of doing it manually.
View 3 Replies View RelatedI have a spreadsheet with when column K is Yes I need to move the data on that appropiate row to the corresponding worksheet in the same workbook. I have the button working but it moves the data in the row if No is in column K which is what I don't want. It also moves - removes the variables but I guess that is another question for another day.
View 6 Replies View RelatedTrying to solve a problem. I have two excel files one called test.xls and the other is test1.xls. I want to transfer the contents of a worksheet in test.xls called data to test1.xls and onto another worksheet called data1 (within test1.xls). I do not want to overwrite the test1.xls file but simply move
test.xls!data to test1.xls!data1, keeping any existing formulas etc on other worksheets within test1.xls intact. Anyone konw some vba code as a macro that could do this for me? Version of Excel is Mac 2004
I would like to move the current row of data to another sheet when I change a value in the row from an x to an s. I think I could use an If statement, but if you can move data from one worksheet to another, I don't know the syntax to use.
View 9 Replies View RelatedIs it possible to create a cell in one sheet, where after data is entered, will move it to another sheet. Additionally, the data in the cell, after the transfer to another sheet is made would delete itself. Once the data is entered, sent to another sheet and deleted, next time data is entered into the same cell, it would be sent into a row below the cell that the first piece of data would be in. Therefore, after I enter data, [for example] press enter, then go back to input some more data, after a while there would be a long list in another sheet. The last feature of the problem (it would be something extra really) is that the function/macro is to be time dependent - during one month the data would stack up in one column, after the next one begins, the next column will automatically start all over.
The idea is to create a budget book - where on the main page I would only have to enter the value in a specific box, the value then would be automatically sorted into the right row and column in another sheet, after the month/week ends, data would start to stack up in a column devoted to a new month/week.
Of course the data could be entered manually in different sheets, but it proved to be too complex to be useful.
I have a big table with a lot of data in it. I basically want to get rid of all of the empty cells, so that all the data that is there for the one person is all next to each other.
All the people's names are in a row for themselves so the empty cells would have to move to the left.
Currently i hav list of info that is long like this.
A 1
B 2
C 3
D 4
E 5
F 6
G 7
H 8
I 9
J 10
How to move row to column example below. Because i want the data to be printed on an a4 paper which can fit around 3 row to save space . If i manually copy paste page by page it is too much.
A 1 D 4 G 7
B 2 E 5 H 8
C 3 F 6 I 9
===
Currently i have macro code which roughly does this.
A 1 B2
C3 D4
E5 F6
G7 H8
I9 J10
Sub test()
Dim rng As Range, m As Integer, c As Range
Columns("c:E").Delete
m = 2
Set rng = Range(Range("a1"), Range("a1").End(xlDown))
Set c = Range("a1")
Do While c <> ""
'MsgBox c.Address
Range(c, c.Offset(m - 1, 0)).Copy
Cells(Rows.Count, "c").End(xlUp).Offset(1, 0).PasteSpecial Transpose:=True
Set c = c.Offset(m, 0)
Loop
End Sub
So I have a sheet that has 9 columns A - I sheet is called "Door Switch Times"
Basicall when column F gets data in it I need then a macro to automatically Copy B, C, D to a
new sheet called "Main". I need B to be copied to C on Main, "C" on Door Switch Timse to be copied to "D" on main and "D" on Door Switch Times to be copied to "E" on Main. I cant post the sheet as my work computer will not allow me to transfer or share files.
I'm looking for a macro to select data from a larger data set, and then put it in another worksheet. Basically, I want to select any cell in column A that contains "SO5" and move those to the column A of a separate worksheet. Then, for each cell that contains "SO5" would like to move to the right 5 columns and down 3 rows and select from that cell all the way to the end of the table. There may or may not be data in all of the table cells, so the selection should be based off of the column headers which will always have values. I would like to take that data and put it with the corresponding "SO5" in the new sheet.
Here's a sample:
MacroSample.xlsm
This is a simplified version, but I'm trying to get the data from sheet1 into the format in sheet2. Keep in mind that the number of columns and rows may change so it needs to be as dynamic as possible.