Macro To Move Data From Data Entry Update Master Sheet Using Formula To Allocate
May 12, 2013
I am working on a project and would like to see if there is a solution for it. i have a workbook that has data entry that is summarized at a master level but I need to automatically use a formula to update another sheet after clicking an udpate button. The data from the data entry sheet needs to be allocated to all the lines that has the same master item based on the formula. A test workbook is attached ...
View 1 Replies
ADVERTISEMENT
Apr 17, 2014
In the attachment you will see an example of what I am trying to accomplish. What I am trying to do is find VBA code that will move data by date from an (Entry) sheet to a (Historical) sheet. I want to enter a date in B3 on the (Entry) sheet. I then enter data into C3. What I would like to happen is when the data is entered into C3 the sheet goes and finds the same date that I entered in B3 and copies that data from C3 into Column E of the (Historical) sheet.
Test3.xlsm
View 5 Replies
View Related
Mar 28, 2014
I have two worksheets. Sheet 1 has 2 columns, Column A the restaurant's name and Column B contains the review score. So sheet 1 is kinda like this:
Restaurant |Score
Ruby Tuesdays 80
TGIF 78
Outback 92
Sheet 2, Row 1 column B-E contain restraurant names (only on the top row, like field names).. i.e. I manually put the date in because typically the projected date is different from the actual review date.
-A----------- B ----------------C ------D-------- E-----
Date |Ruby Tuesdays|Olive Garden|TGIF|Ruths Chris|
I need the data from Sheet 1 Column B moved to sheet 2 in the next open row (i currently have data in row 1..the field names and down to row 35). This will be continuous so each time i need it to add the score as a new row in the correct field (restaurant name), IF the restaurant isnt listed, I want a new field named with the restaurant name and then place the score in the correct row and column. So, in the example I'd need Outback added.
View 9 Replies
View Related
Dec 6, 2006
I have one source spreadsheet, where are columns NAME, DATE. I read these data by ADO to other spreadsheet, where I can change/delete data and then run macro for update data in source spreadsheet. The problem: In source spreadsheet is column "NAME" and column "DATE", with values e.g. "Joseph"; 1.1.1980. I read this data to other spreadsheet, then I delete in it value 1.1.1980. When I run macro Update, it messages error.
Sub UpdateItem
...
.Fields.Item(1).value = activecell 'activecell value = "Joseph"
If Not isempty(activecell.offset(0,1)) Then
.Fields.Item(2).value = activecell.offset(0,1).value
Else
.Fields.Item(2).value = "" 'I tried Empty and 0 too but when I read data again then, it displays 0.1.1900, nothing works
End If
...
End Sub
It seems that in source spreadsheet has data in column "Date" format Date and when I try to update data in format String ("") in source spreadsheet by Update macro, it messages error. When I used
.Fields.Item(2).Value = Empty
' or
.Fields.Item(2).Value = 0
after rereading data it displays 0.1.1900 What I want to get is that if the cell with date (in other spreadsheet) is empty, the cell in column Date in source spreadsheet after updating will be blank (contains no values).
View 2 Replies
View Related
Jul 15, 2009
I want the script to find if the value entered in the form is matching the values in column 'A' in the database and if it matches then it needs to select the cell as active cell - to populate the form details. And if there is no matching value found, the script needs to select the last empty cell of the column 'A' to populate the data entered in the form.
1) Form has 10 different fields that needs to be filled by the user.
2) Field 1 - is a text box for 'Request #' to be entered by the user.
3) After filling in all the fields - once clicked on OK, the form should search for the the 'request #' entered on the form in the database (Form and the database are in the same workbook).
4) If the 'Reqeust #' in the Column 'A' matches the the 'Request #' entered in the form, then the matching cell should be selected (Activecell -Were the data can be overwritten, with the new entry)
5)If there is no matching 'Request #' found in the database, the script should loop to select the next available blank cell in column 'A'. So that the form data can be entered.
View 14 Replies
View Related
Feb 21, 2009
How do I setup one "master cell" to be used as the permanent entry point for dollar values of all entries performed as needed....and have that value be automatically added to the cell of the month reflecting the day the data was entered?
I am looking to keep track of purchases on a monthly basis. (e.g. I have 35 receipts for today...I just want to grab one at a time, enter the total for each receipt in one cell and have it add the value to which ever month's value based on the day I enter it.
View 9 Replies
View Related
Apr 22, 2013
How to get updated data from connected 3 XL workbooks.(files)
1= ODBC connection ( This brings data from a Basis Query) it will updated 1 or max 2 times a day.
2= Manuel input ( It will update after inserting new data, many times a day) Password protected
3= This One is my master file which brings data in 2 different sheets from above mentioned files. Password protected
My problem is started when i want to see latest updates from file 1 & 2 in my Master file then i have to re-open my Master file, Is it any option which fulfill my requirement that i will keep my main file update just by clicking <save> & I will not re-open file at all times ?
I can't have a shared file. & my all these 3 files are in the same folder.
simple Formula used to bring results are =[Book1]Sheet1!$A1
View 2 Replies
View Related
Jul 12, 2013
I am trying to create a worksheet that you fill in data on the master tab, and it copies to the appropriate secondary tab based on set of criteria
I have one worksheet with multiple tabs.
Tab 1 - Master
- This tab is updated by admin with new contacts
Tab 2 - Customer service rep 1
- This tab will have all the listings that have the CSR1 in a column in the master table.
Tab 3 - Customer Service rep 2
- This tab will have all the listings that have the CSR2 in a column in the master table.
Each table has the same columns of data which all need to be copied to the sub tables if the CSR column matches.
Is there a formula that would work to auto copy data from the master to the appropriate sub tab or maybe its needs to be done in VB?
View 1 Replies
View Related
Apr 15, 2013
I need to create a macro to copy the data from time sheets of different employees into the Master sheet. ie., each employee's time sheet details in to a separate sheet. If any employee fails to provide his/her time sheet details. a mail must be sent to the respective employees regarding the Time sheet submission. I am providing the sample data of my files too.
Intentionally TS_Employee5.xlsx timesheet isn't provided. In which case, I have to send a mail to the respective employee, in order to remind him about the time sheet.
View 12 Replies
View Related
Jul 11, 2014
Attached is a master metrics deck, where data needs to be refreshed every week, from two different workbooks.
The catch is, the two parent workbooks would be new versions every week (data would be same format, and style within), but file name would change each week, for eg: for 1st workbook, 'XXX_Weekly_Week24.xlsx' to 'XXX_Weekly_Week25.xlsx' and so on.
for 2nd workbook, 'YYY_Weekly_Week24.xlsx' to 'YYY_Weekly_Week25.xlsx' and so on.
In the master metrics deck, a consolidated vew of some of data from workbook 1 and workbook 2 is presented for each week.
This master file would remain same, and only be refreshed each week (preferably with a button on its sheet "REFRESH!!")
Next, need to manually change cells C2:G2 each week to reflect week titles correctly.
For e.g.: week6 would show week 1 through week 5, but during week7, it needs to show week 2 to week 6. Only last five weeks of data any given time.
The first datarows of each set are conditionally formatted (they are compared with other rows in the set and need to reflect danger values, good values etc) (I have done that already).
View 1 Replies
View Related
Dec 19, 2012
consolidating data from 3 worksheets which contain same data fields but each representing 1 brand. I like to have a summary/mastersheet to contain data from all 3 worksheets and then when the data in each worksheet is added or updated, the summary worksheet should reflect the changes (adding new data to the last row).
Project Submissions.xlsx
View 2 Replies
View Related
Mar 25, 2014
I have a worksheet that has time clock information. I also have a resource on the web to see some information and even export it. In the exported data it looks as follows:
A1 contains an individuals name
B1 says times i.e. "8am to 5pm"
I would like a macro that takes the data from A1 and moves it to another worksheet in the B4 position down, and take the times from B1 and move the first time to the C4 position and the last time to H4.
View 9 Replies
View Related
Nov 5, 2009
I have had several intro programming classes, but not with visual basic. I've noted the problem lines with comments below. The problems are probably very easy syntax error.
Sub list()
Dim counter As Integer
Dim counter2 As Integer
Dim id As Double
Dim id2 As Double
Dim palletnum As Integer
ActiveSheet. Name = "Pallet Detail"
Sheets.Add
ActiveSheet.Name = "Pallet Summary"
Sheets("Pallet Detail").Select
View 7 Replies
View Related
Mar 7, 2013
I have a worksheet designed to look like a form. That worksheet pulls data from an "Application Data" worksheet using INDEX and MATCH formulas. That part works great. The user enters an Application number on row 8 and it populates all of the other cells. In fact, in cell O7 (not pictured), I have it generating the row number the data came from (based on a MATCH function).
Here's my question--if they go in and change a value in one of the other cells, they should be able to press an "Update" button. That will then kick off a macro that goes to the "Application Data" sheet, finds the row that has the Application Number (from row 8) and updates the values based on what the user entered on this form.
How do I write the statement that selects the row based on the Application Number?
View 5 Replies
View Related
Nov 19, 2009
I already have various dependent validation lists established using the INDIRECT function.
Now I want to figure out how I can automatically change the selected values given the selected list. For example:
Cell D11 is a validation list with options: Boat/Car
Cell D15 is a validation list where if D11 = Boat the options are Catamaran/Sailboat/Tugboat. If D11=Car the options are Convertible/Sedan/Midsize.
The problem is that if D15 is preselected as Sailboat, for example, and you go back and change D11 to equal Car, cell D15 remains an option from the Boat validation list. I would like it to automatically update as the 1st item on the car validation list.
View 9 Replies
View Related
Apr 12, 2006
I've been updating all the charts manually each time I update the entries in the worksheet which charts are created from in the same workbook. Is there any way (eg. by use of macros or VBA) that I can have all the charts updated automatically when data ranges are updated each time?
View 2 Replies
View Related
Jul 18, 2014
I have written code for a userform, and after I enter in valid data, the cursor will not move on to then next field. I cannot even click on another field with my mouse. I changed some of the code around to add validation to it, and now I am unable to move on once a valid entry has been made. If the user enters in the value "9999" the userform works just fine, it only freezes when they attempt to enter in an employee number. I've tried a few different ways to resolve this, but nothing is working. This is the code I have written.
[Code] .....
View 2 Replies
View Related
Jul 4, 2012
I have a workbook that includes 4 seperate sheets that are used to record time and expenses for 4 members of staff. I want to write a macro to select the data I need from each sheet and colaberate together in a 'data' sheet so I can combine all the info to run time and expense reports per client showing combination of all time and expense incurred from all 4 staff.
I have named cell ranges in each of the 4 time-sheets. I proceed to record a macro, select the first named range, copy and paste into my data sheet, do a control home then control down arrow, then one more down arrow to get to the first blank cell and repeat the process for all four time-sheets.
This works until I add a new line and then the data will only appear for the last time-sheet (last row of data).
View 2 Replies
View Related
Feb 15, 2010
this are function which button needs to be able to do after clicking on it.
• When the value of only one of Description or Unit/Price is entered, a warning message appears.
• When the message is confirmed, return to the entry status for the new data.
• When the values of both Description and Unit/Price are entered, save the values in the list of product (worksheet Product), and increase Product No. by 1 and erase values from NewProduct worksheet this is the screen how it should look but button which should be able to do all the thing above at once is called List Entry
[url]
after creating this function all the values from the table product need to be update into another table which sould look like that:
[url]
Is there anyone how could write code which will do thing above?
in the attachemnt is the excel file which shows what I have done so far, as i am not a good programmer,so I do not know if it's right
View 7 Replies
View Related
May 5, 2009
Now that the calculations are working, with the press of a button, I need to be able to select a range of dates and copy all lines within the range to a seperate sheet with the desired name under the same headings they currently reside under. I have included some modified code that is being used in another spreadsheet that was created for me, but I do not pretent to understand all of it and I no longer work with the creator of the spreadsheet. How do I use a button to open the form for date selections and entering the name of the new sheet, and then use the start button on the form to begin the matching and copying to a new sheet? If there is an easier way I am all for that too.
View 14 Replies
View Related
Jun 10, 2008
i have facing a big problem nowadays.problem is that, i have to regularly update manually(copy & paste) "oil filling", " stock" & "meter reading", coming from every day by the supervisors of our company for verious sites spreading accross the our state, nearly 1305 site. i have attached the master file(which should be updated) with the reports coming from the supervisors(Rosan & Jhon) in another sheets. the master file is same form as i given. is their any way of automatic update by any macro.
View 2 Replies
View Related
Feb 6, 2008
I have a master spreadsheet that list several columns about employees(name, date, event name, etc.). Then I have an indivdual sheet for each employee. I am trying to import the column information for each employee onto their individual sheet based on their name. It is possible to import the individuals data from the master sheet to the individual sheet based on the employee name?
View 9 Replies
View Related
May 26, 2013
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
View 2 Replies
View Related
Aug 28, 2013
I want vba code to pull data from two sheet in workbook, code has to pull all data from first sheet , then pull data from second sheet and paste some particular column only below first column sheet
e.g i pull data from two sheet(ONSITE&CCI)
SHEET-1ONSITE CONTAINS HAVE 57 COLUMN
SHEET-2 CCI CONTAINS ONLY 19 COLUMN
FIRST I PULL 57 COLUMN DATA ONCE FINISH MOVE TO SECOND SHEET CCI CONTAINS 19 COLUMN BUT ITS HAS TO PASTE DATA BELOW DATA OF ONSITE TO PARTICULAR ASSIGNED COLUMN'S ONLY BUT COLUMN NAMES IN BOTH SHEET IS TOTALLY DIFFERENT
View 1 Replies
View Related
Apr 7, 2011
I have multiple sheets all of which are identical except for the number of rows containing data. I have been trying to create a macro to update these sheets into one 'Master' sheet but I'm having great difficulties due to me needing to leave Column A and Row 1 blank.
I have uploaded example data of what I am after, sheets 2 - 6 need to be automatically updated to the 'Master' sheet when the macro is run.
View 6 Replies
View Related
Mar 1, 2014
In this attached example, this is a portion of a actual work procedure. The yellow highlighted cells are the same work element within the master procedure but one is for one type of machine while the other is for same model but added options. This is a pattern throughout the entire worksheet. Basically 1 model with several different types of options. I don't want to have unnecessary elements in a work procedure.
So what I am trying to accomplish, I want to create a userform or dashboard which will allow selection of model #, model type #, then based off those selections have excel populate a worksheet with all correct procedures based off model type choice.
In this example there is 6 model variations, all share same basic procedure, but all have their own work procedure based on options, so my above approach will allow me to make changes to the master procedure only instead of changing 6 procedures.
View 6 Replies
View Related
May 16, 2014
So, I'm setting up an accounting book. There's a master sheet that needs to pull from the other sheets that are made. The problem is, with each new sheet that is made, I have to update the formulas on the master. I would like that if I made a new sheet, the master would automatically pull from it.
Example:
Master pulls renter fee info from May 3rd, May 7th
I create sheet (May 15th)
Master pulls renter info from May 3rd, May 7th, May 15th
View 1 Replies
View Related
Jul 17, 2014
formula to make data on same line.On converting data2 is above data 1. I insert a column on left . Need to use mouse right click shortcut delete manually shift cells left and then delete shift cells upto have both data on same line but should be in different cells and same sequence per attached ALSO TO REMOVE "/ -DASH HYPENS.
What I need is formula to move the data2 on same alignment and to delete the two empty rows between both data.
See annexed file for expected results.I have preference to have a formula much more.
View 7 Replies
View Related
Jan 30, 2014
I am trying to create a "Master Sheet" where I enter in the column data and after I have entered my data for each row, I can select the button which toggles the macro to run. I have it built to build new sheets as new clients are obtained. My problem is after I have a sheet that has client's data I cannot get new data to add itself below the data that is already there. I want each client's sheet to keep adding rows as more data comes in. My current macro is :
[Code] .....
Attached File : Data Entry Macro.xlsx
View 3 Replies
View Related
Mar 27, 2013
transfer data from several sheets to a master data sheet. The problem I am having now is there are couple blank cells. My code just ignore the blank cells on the master data sheet and paste next to the last cell with content. For example I attached a test excel. with my code. I want to leave the blank cell as it is to keep the same product in one row. below is my code.
VB:
Sub Copypaste()
'
' Macro8 Macro
For Each ws In Worksheets
[Code].....
View 1 Replies
View Related
