I have a big table with a lot of data in it. I basically want to get rid of all of the empty cells, so that all the data that is there for the one person is all next to each other.
All the people's names are in a row for themselves so the empty cells would have to move to the left.
I am trying to write a macro that will take data from column A and use it as a column header in column C, and then take the corresponding data in column B and list it under the column header in column C. When the value in column A changes it will move on to column D and then list the corresponding data from column B underneath it in column D until all of the data in the 2 columns is spread across the worksheet. Example:..............
View 2 Replies View RelatedData is input into my spreadsheet. It is not always in the same cell, and is not always the same length vertically. I want the user to select the top left of the data and then automatically do text to columns. Here is my code that is not working! :
Sub TextToCol2()
Dim rng As Range
Set rng = Application.InputBox(prompt:="Select a cell", Type:=8)
ActiveSheet.Range("rng:A" & Range("A65536").End(xlUp).Row).TextToColumns DataType:=xlDelimited, ConsecutiveDelimiter:=True, Space:=True
End Sub
Column A is numbered 1 -100 successively Column B thru D contains data that goes with the assigned number in column A. I need to be able to move rows of data in column B through D to a different set of rows all at the same time (not one cell at a time) without disturbing the set numbers in column A. And with that, have all the other rows of data automatically adjust accordingly(not to be deleted or replaced).
View 1 Replies View RelatedI need to move characters from the end of a string to the beginning.
I have a list of Exact stings that are allowed. I need to move this allowed string to the beginning.
JAN
JANS
JANTX
JANTXV
If "TR" or "T/R" are at the end of the allowed Exact string, I need that removed completely.
i.e.
JANTR = JAN
JANT/R = JAN
JANTXT/R = JANTX
PN
Desired result
1N3595UR-1JANTX = JANTX1N3595UR-1
1N4992JAN = JAN1N4992
2N1711JANS = JANS2N1711
1N4148UR-1JANTXVTR = JANTXV1N4148UR-1
In a large database with a large portion of cells that contains a flag to the left of a number "<LD 2.0" what would be the quickest way to move the flag to the left of the number so that it reads "2.0 <LD". This seems like it should be simple to do. I would prefer not to have to use a second cell and formula to do the modification if that makes sense. I'd rather do a "Find and Replace" if possible.
View 5 Replies View RelatedDate
Product
Pass
Fail
Repair
Group Product 1
P
F
R
Group Product 2
P
F
R
Group Product 3
[code]....
I currently have raw data in Sheet 2
On sheet 1 would like to get the summary of the data as posted in the picture... unfortunately there are "groups" in the raw data and I need them separated and conformed to get an accurate picture.
This formula tells me the highest number: =LARGE((G36,O36,W36,AE36),1)
The result is AE36. The answer is correct. I get the highest number. I want the formula now shows Y3 instead of AE36.
In my situation Y3 is the name of 1 of my tables. In my case I get from this table, the highest number.
These are 6 cells to the left side. These are 33 cells to the upper part. In the future I will work with more tables. So the answer must always move
I've been busy this few days to investigate. That is why I know it works with offset. Anyway, I still do not know how it goes.
My goal is to have my comment indicators on the top left of the cell like an error indicator and when you hover the comment appears on the left too instead of everything on the right. The reason for this is that I have a floating userform on the right and the comment always appears under it on hovering.
View 2 Replies View RelatedI have a large spreadsheet converted from pdf whose data still appears in A4 reading format.
I need to move part columns of data from 6 columns to form 1 large column in column A.
For example, move range B8 to B76 beneath range A8 to A76 and range C8 to C76 beneath that etc, page by page working through all 270 pages !
Also need to delete unnecessary 'page headers' throughout as in rows 2-6
So, I have a column with data on rows as follows below. I need to arrange the data below in such a way that I have on first column the company name, second column the contact person and so on depending on what data is found (tel, e-mail, website).
The data is on rows and I have separated each company/group of data with a row between them. There are in total aprox 200 companies/groups of data that I need to arrange as explained above.
I have tried with transpose but I have to manually do it 200 times. I have tried with an indirect formula but the companies/groups of data do no have same amount of info/rows e.g. some lack the phone number or other data.
if there is a method to save the time and not arrange them manually.
Actinote
Contact: Toine Kets
Managing Director
Str. Tache Ionescu 3, Et. 5, Apt. 10
[Code]....
If the row contains a text like ABC in multiple columns in a sheet it has to copy the whole column from that sheet and paste special into another sheet.
View 2 Replies View RelatedI am trying to move information that is pulled from a database to look cleaner and easier to read. All of the information exports out into column A only. The attachment is a brief example of what it looks like, and what I’m trying to get it to look like.
I want to move the data in col A to 5 columns C through G in groups of 16 rows. Once the last column is filled with a group of 16, it needs to fill below the first group of 16 in column B onward to column F. It should repeat this process until there is no more data in A. The attachment shows it much better than i can explain it.
I have some basic experience with formulas and macros, but I haven’t had any luck trying to manipulate any of them to give me the information the way I have shown. I would prefer to not have to manually type or cut and past the information in if possible.
I have an excel spread sheet and on the last column on the right hand side I have some comment boxes but when I hover over them they pop up to the right of the cell, and then they are off the screen.
Can I alter it to make the comment box pop up to the left side of the cell.
[Code] ....
Is it possible to adapt this code to get me the desired results or will it have to be a separate one.
Also i'm not sure if I have the code right because if I run the macro then open a comment box in the (M) column as in the code the comment box is the default size then if I run the macro again once I have the little red tick in the corner of the it changes to what the code says.
Need a way to switch the default positioning of pivot table row totals? I would like to left justify them insead of always having the totals on the far right side where they are often out of view to the user without scrolling. I end up having to place 2 pivot tables side by side so that I can make the totals appear first.
View 3 Replies View Related=IF(AND(EOMONTH(TODAY(),COLUMN()-2)<TODAY(),(TODAY()<EOMONTH(TODAY(),COLUMN()-1))),Sheet2!C10,"NO VALUE")
The above formual resides in each cell in row 1 column g inclusive.
The question is when I move over columns the previous column with figure is wiped out because false "no value" becomes true.
How do I stop the previous data from being wiped out once I move on in columns?
I have a table with one column of data. The data in this column repeats with 4 relevant pieces of information that I want to put in 4 different columns (fields) in a different spread sheet (or the same would work better and I would just delete the first column when done) keeping the same order the data is now in.
The data currently repeats in a regular pattern (i.e. 123412341234 with no other data in between). I would like to do this with a macro. Could someone help write a macro that will do this
I saw this thread from June Cut & Paste Macro: Move Address From Column To Row and I think this what I would like to have my macro do. I have one column which is copied and pasted as text in excel and there is several blank rows.
I attached the spreadsheet example - it has 40 lenders, with the top row being the lender name (A1), followed by address(A2), city-state (A3), two blank rows(A4-A5), lender type (A6), approved date (A7), one blank row (A8), lender specialty (A9), telephone (A10) , e-mail address(A11) and two blanks rows (A12-A13) and A14 starts over again. For this example there should be 8 columns and 40 rows (lender name, address, etc...). As I mentioned I think the previous thread's macro would work with some minor tweaks. I couldn't figure out the best way to handle the blank rows and or remove the blanks and what to add or take out of the macro code.
I have names is Column A (about 200) and names in Column B (about 800) along with additional info in other columns. Column A was just added to an existing spreadsheet and will be deleted once I accomplish my task. The goal is to come up with the 200 names in column A along with the additional info in the other columns (address, phone) and to delete all of remaining names in B (about 600, 800-200) I'm trying to figure out the most efficient way to do this. I'm not sure if there is a function to match the text in Column A to Column B and at the same time move the row in Column A to match the row the name is located in Column B.
For example John Smith is currently in A1 and John Smith is in B7 and then John's phone number is in C7. I want the John Smith in A1 to move to A7. If I can make that happen for all 200 names I will then delete all rows with no entry in column A.
I am using Excel 2010 and need a macro that can convert data from rows to columns. I have read several posts about this subject but have no experience with macros and don't know how to change the macros to fit my scenario.
Here is what I currently have:
Account...Vehicle1...Loc1...Vehicle2...Loc2...Vehicle3...Loc3...Vehicle4...Loc4
11111......2008........FL
11111......2000........FL
12121......1999........GA
33222......2000........AL
33222......2011........AL
33222......2001........MS
Here is what I need it to look like:
Account...Vehicle1...Loc1...Vehicle2...Loc2...Vehicle3...Loc3...Vehicle4...Loc4
11111......2008.......FL.......2000........FL
12121......1999.......GA
33222......2000.......AL.......2011........AL......2001.......MS
There are up to 4 vehicles/locations per account number, and I need 1 account number per row (the dots above are for spacing only and not part of the actual data).
I could do this manually but because I have so many rows of data it could take days or weeks. Is there a macro out there that can do this??
I am using excel 2007. I have data which, instead of being posted on multiple columns, is all within 1 column. The data most simply has the characteristics of:
AAA
AAA - description
BBB
BBB - description
CCC
CCC - description
and so on..
I would like to move the descriptions from column A to column B:
AAA AAA - description
BBB BBB - description
CCC CCC - description
and so on...
What would be the best way to accomplish this?
I have a sheet which I need to arrange and it looks like -
Column A
Column B
Column C
Column D
[Code]...
the values in Column B, C , D , E & F need to be in new columns based on what we have in Column A associated with "1"
Output should be -
Column A
Column B
Column C
[Code]....
so whatever is in Column A associated with "0" should remain in place whereas whatever is in Colimn A associated with "1" should get added to the new columns. 0 and 1 resembles the 1 Records which are used as a split to normalize the data.
i need a code that moves down a column and for every empty cell in the column the cell to the left is cleared and then it moves on to the next cell down. the column is not always the same and will start from a selected cell, and the column will contain no more than 5 rows
View 3 Replies View RelatedI found this code on Ozgrid to sort all columns of a worksheet that were continuous with no gaps or spaces that works well:
Sub CopyToA()
Do While ActiveCell <> ""
Range(ActiveCell, ActiveCell.End(xlDown)).Cut Destination:=Range("a65535").End(xlUp).Offset(1, 0)
ActiveCell.Offset(0, 1).Select
Loop
End Sub
However, I've tried to manipulate the code myself to 1) find all columns that aren't empty then 2) sort each column individually (WITHOUT expanding the sort to other columns) and 3) combining all the numbers into one seperate column. There are many posts concerning sorting but not one that addressed this particular situation.
I have 12 columns of numeric data in cells AA80 through AL80. Beginning with the cell on the far right (AL80), return the value if >0. Otherwise, proceed to the cell to the immediate left (AK80) and return the value if >0, otherwise proceed to the next left cell...all the way to AA80. I tried this by nesting IF functions, but have too many IF functions to nest. Lintcoop posted a similar thread in 2008 but with text data.
View 2 Replies View RelatedI am trying to find any way possible to freeze left side 3 columns and 3 right side visible columns on the screen. and the rest columns in between these freeze columns scrollable on left or right arrow keys as normal.
View 4 Replies View RelatedIs it possible to re-order entire columns based on cell values? For example, row A gives values of 1 thru 10 to the first 10 colums. I would like a macro that reorders the entire columns based on that value.
View 6 Replies View RelatedI recently installed 'windows 7 ultimates' , and after i insalled Excel 2007 .. the columns start from right to lfet (..., C, B, A), I want to reverse it to start from left to right (A, B, C, ...), I don't know whether the new ystem 'windows 7 ultimates' has some effect on it to be modified like this. moreover, the language of system is English. so how to solve it
View 3 Replies View RelatedDoes anyone now if it's possible to freeze left and right hand columns simultaneously eg. cell C3 above and left AND cell DB3 above and right?
The columns on between would then scroll left or right, until the static column was reached?
I'm trying to write some code to Hide columns if the first 3 characters of cells in a range equal the contents of another (formula equivalent would be something like this =IF((LEFT(A2,3))=A1,"HIDE COLUMN", "SHOW COLUMN"). I have gotten this far but cant get it to work;-
Private Sub Worksheet_Change(ByVal Target As Range)
Dim r As Range, cell As Range
On Error GoTo ErrHandler
Set r = Me.Range("B7:CG7")
Application.ScreenUpdating = False
Application.EnableEvents = False
Row = 1
col = 1
For Each cell In r
If cell.Value = "" And Left(cell.Value, 3) = cell(Row, col).Value Then
cell.EntireColumn.Hidden = True
Else
cell.EntireColumn.Hidden = False
End If
Next
ErrHandler:
Application.ScreenUpdating = True
Application.EnableEvents = True
End Sub