The attached workbook has formulas that will return data from category sections that will grow and contract over time.
While it tells me that the total price of the "Active Overdue Customers to be Scheduled" section is 4119...I would like to determine how many in that section also have "Dunn" under the "Company" column.
Every section does not have the "Company" column, and "Company" is located in different columns in different sections.
I have an month input in cells B2 (user can enter values from 1-5)
I then have a data table that has month 1,2,3,4,5 running across range G9:K9. the data is held in range G10:K19.
So if user types in 4 in B2, what should happen is that months 1,2,3 and 4 the data for these months should be cleared and data in month 5 moves forward into month 1.
So basically, anything left of the month entered is B2 should be cleared and replaced with anything right of the month in B2.
1
2
3
4
5
£11
£133
£29
£193
£100
[Code] ........
I have 1 column with a varying amount of rows (around 2000+ rows) with data that is about 10 chars long. Since I cannot print it all on a few pages, I would like a way to re-orgnize the data into cells so I can print on as few pages as possible such that the qty of columns isn't wide then an 8.5 x 11 page.
One idea is the following.
Here's what i have.
Col1
1
2
3
4
5
6
7
8
9
10
...
Here's what i want.
Col1 Col2 Col3 Col4 Col5 Col6 Col7 ...
1 2 3 4 5 6 7
8 9 10 ...
Ive spent a few hours adding email hyperlinks to data in column B.
I now want to sort the data in the worksheet into ascending order using the data in column A.
The problem is, none of the hyperlinks from column B sort with the data in column A, they are still in the cell locations I had originally entered them.
I have a sheet which I need to arrange and it looks like -
Column A
Column B
Column C
Column D
[Code]...
the values in Column B, C , D , E & F need to be in new columns based on what we have in Column A associated with "1"
Output should be -
Column A
Column B
Column C
[Code]....
so whatever is in Column A associated with "0" should remain in place whereas whatever is in Colimn A associated with "1" should get added to the new columns. 0 and 1 resembles the 1 Records which are used as a split to normalize the data.
is there a way to stick a few row of cells together so that when i move one they all move.. i have some rows that when i sort them i want them to move together with the other ones..
View 9 Replies View RelatedI am trying to move the data in a row from cell D thru I (eye) to cell H thru M.
Simply move it all over a few cells. Well not so simply.
The line in RED fails.
I have rows of data starting in row 4.
I have row Headers taking up columns A:G.
My data, which is downloaded, can be anywhere between H4 and IV900.
I need a macro that will go to G4
Then do the equivalent of arrow right to the first cell containing data
Select that cell and all cells to the right of it
Copy the selected range
Cut and Paste it back to H4
Move to G5 and repeat all the way down the worksheet so that I end up with al of the data starting in column H rather than spread all over the worksheet.
I have two worksheets. Sheet 1 has 2 columns, Column A the restaurant's name and Column B contains the review score. So sheet 1 is kinda like this:
Restaurant |Score
Ruby Tuesdays 80
TGIF 78
Outback 92
Sheet 2, Row 1 column B-E contain restraurant names (only on the top row, like field names).. i.e. I manually put the date in because typically the projected date is different from the actual review date.
-A----------- B ----------------C ------D-------- E-----
Date |Ruby Tuesdays|Olive Garden|TGIF|Ruths Chris|
I need the data from Sheet 1 Column B moved to sheet 2 in the next open row (i currently have data in row 1..the field names and down to row 35). This will be continuous so each time i need it to add the score as a new row in the correct field (restaurant name), IF the restaurant isnt listed, I want a new field named with the restaurant name and then place the score in the correct row and column. So, in the example I'd need Outback added.
I have some code below that moves pasted data to the left and then pastes it to another page. Trouble is: 1) When the data is moved to the left I would like the spaces in the text to remain e.g.
1 2 2
would become
1 2 2
instead of
122
(as is the case currently).
Range("A3:IK34").Select
Selection.SpecialCells(xlCellTypeBlanks).Select
Selection.Delete Shift:=xlToLeft
Range("A3:IK34").Select
Range("A34").Activate
Application.CutCopyMode = False
Selection.Copy .................
I am working on a project and would like to see if there is a solution for it. i have a workbook that has data entry that is summarized at a master level but I need to automatically use a formula to update another sheet after clicking an udpate button. The data from the data entry sheet needs to be allocated to all the lines that has the same master item based on the formula. A test workbook is attached ...
View 1 Replies View Relatedformula to make data on same line.On converting data2 is above data 1. I insert a column on left . Need to use mouse right click shortcut delete manually shift cells left and then delete shift cells upto have both data on same line but should be in different cells and same sequence per attached ALSO TO REMOVE "/ -DASH HYPENS.
What I need is formula to move the data2 on same alignment and to delete the two empty rows between both data.
See annexed file for expected results.I have preference to have a formula much more.
I have an Excel sheet with several columns of data, each containing the link to a website. To the far right of this data, I have a column called "Official Source" in which I'd like to copy over any website links containing the phrase "sec.gov" (if there are any, if not than leave the cell blank).
For example, if I have the following data in my sheet:
Column A Column B Column C
[URL].... [URL].... sec.gov/Ar
Than I would want the last source to move to column D -
Column A Column B Column C Column D
[URL].... [URL].... sec.gov/Ar
how to do this?
I have whats going to be a very large "Input" worksheet that has several headings of columns. One of these columns is "category" as in parts of a vehicle, i.e. steering, wheels, rod-ends and so on. Now what I would like to do, is once I type a new row of information in, to have the filter go through and copy said category row into another worksheet where I can have all of them separated on there own.
Here is a picture of my current spreadsheet. So basically I want to be able once I save the file, that it goes through and where it detects Rear-End in "B18" I would like it to select row 18, copy all of its cells and move them into the worksheet Rear-End
I have a task that I need to perform every now and then. And even though I normally find my ways around in Excel, I can't find a working solution for this one.
I have a list of features that I need to match with another list and place them on the same rows in my sheet. The attached file contains 2 worksheets where "Before" shows my normal input, and "Wanted" shows what I need to do.
Cols A-E contains info for the first set of features, cols G and H is the cells I want to move. Please note that sometimes the G and H columns contains info that are not present in A-E, and then I need to move those features around as well. An example is present at the bottom of the "Wanted" sheet.
I have to move formulas from cells without the changes ?
Then i use copy-past it changed the rows and collums numbers, but i need to keep absolutly the same formulas
way to find all the cells in range A1:A200 that partly contain the string "FindThisWord", and then cut & paste each of those cells 1 row above and 2 columns to the right?
View 8 Replies View RelatedIn my current spreadsheet I use Offset to change the values of various cells. The problem is that if I make any changes to the columns it throws the whole offset thing off. So, instead of using offset to paste all the data is there an alternative that would work better?
I was thinking maybe I could name a column as a range and then have the cell in that row equal a value.
What solutions are there?
ActiveCell = TextBox1.Value
ActiveCell.Offset(0, 1) = TextBox2.Value
ActiveCell.Offset(0, 2) = ComboBox9.Value
ActiveCell.Offset(0, 3) = ComboBox2.Value
ActiveCell.Offset(0, 4) = ComboBox3.Value
ActiveCell.Offset(0, 5) = ComboBox11.Value
ActiveCell.Offset(0, 12) = ComboBox1.Value
ActiveCell.Offset(0, 13) = TextBox6.Value / 100
ActiveCell.Offset(0, 16) = TextBox4.Value
ActiveCell.Offset(0, 17) = TextBox5.Value
ActiveCell.Offset(0, 18) = CostBasis
ActiveCell.Offset(0, 19) = NumberOfShares
ActiveCell.Offset(0, 59) = DividendFreq
I have designed a form for my wife to use in school to help teach fractions and decimals.
The children will enter the numerator into a cell (say D2) and the denominator into another cell (say D6) and the decimal equivalent is then displayed to 2 decimal places in a third merged cell (say C8 - E8).
What I would like to do is this:
When the worksheet opens, the only cell that I want the children to be able to enter data into is the first cell (ie D2). When they enter a value (say 1 for the numerator) I'd like the return key to move the data entry to the next cell (which is D6). After this, when they have entered another value (say 3 - they are invesigating thirds for example), I'd like the return key to move to the next numerator cell (which is H2), then denominator cell (H6) and so on.
How do I do this? I have never created forms or macros and I suspect that this is how to do this.
For the first set of fractions that they are investigating, thirds, I'd like to limit their data entry in the denominator cells only (D6, H6, L6, P6, etc) to 3 and reject any other number. Later in the worksheet, they will be investigating quarters, fifths and so on.
How do I do this? I don't want then to use any list or drop-down, simply to type a value into the cell and it be accepted (if it is a 3 when investigating thirds) if it is correct or simply ignored if it isn't. Is this possible?
way, especially if it involves anything complicated like macros. Being active on lots of forums it is quite depressing when I see that someone has answered a poster's question but the answer seems to either assume a high level of knowledge or tends to assume that certain steps are taken without actually stating them.
I got a sumif formula, where I sum the hours if a certain person is represented. =SUMIF(K12:R12;"TW";K11:R11) Hours in row 11 and the person in row 12.
The patern in my excel document is that every second row is hours and persons. Hours on odd row number and persons on even.
My problem is that when I want to copy my formula down, it goes one row down to =SUMIF(K13:R13;"TW";K12:R12) I want it to go two rows down to =SUMIF(K14:R14;"TW";K13:R13)
Is there a way to automatically move cells down after I entered data in it? This way I do not have to scroll all the way to the bottom of the list to add new data.
View 5 Replies View RelatedI've been trying to figure out how to use a formula that would enable me to copy/copy & move a range of cells right one column if a certain criteria is met.
Basically, if a criteria is met, I want to 'copy' everything from a row to another row, but offset it by one column (so that what was in, let's say, a1 would be in b2).
I've been tinkering with index(), if() and offset() in various combinations but think I must be missing something.
I have come across a format issue I need to deal with it at work.
I have a list of data like this:
A
1234567
8956423
4561237
7531596
8524561
In Column A, I have about 2,000 lines of information. What we want to do at work is create this information to be held in one cell at the top of the excel and in numerical order.
Like this:
A
1234567, 4561237, 7531596, 8524561, 8956423.
In Sheet1 is 11 headings.
In column I, titled 'complete?' the user simply puts an x to show that the order is complete.
Once this happens, I would like the information in the row containing the x from columns A to I (but not J and K) to be copied to the next empty row in Sheet2. Then to clear the information from the cells in the row of Sheet1 from columns C to I, but have the data in columns A,B,J,K remain for the next order.
I have the following code that will go down through column "L", look for the value "ATS", and if found will move it to the right 1 cell. this works find,
My need is to also move the 2 cells directly below the cell containing "ATS", then clear the contents of the "Original" 3 cells before going to find the next instance of "ATS".
Sub Move_Values()
Dim myrange, cell As Range
Set myrange = ActiveSheet.Range("L4", Range("L5000").End(xlUp))
For Each cell In myrange
If InStr(cell.Value, "ATS") > 0 Then
cell.Offset(0, 1).Value = cell.Value
cell.ClearContents
End If
Next cell
End Sub
I have 2 col A & F. F col associate with date values & Col A has some color cells.I want to move down those color cells to a selected non-color cell row when run a macro.
I have code which perform to move color cells down to selected cell but problem is, if i have A4 & A6 color cells and i selected F2 cell & run macro then color cell A4 & A6 move down to cell A2 but cell A3 move to place A6. The sequence is
A1A2A4A6A5A3A7A8 & so on but i want cell A3 just push down the order & sequence will be
A1A2A4A6A3A5A7A8 & so on My code is as
Code:
Public Sub Move_colored_cells_rows()
' Instead of moving the entire row , 10 columns will be moved
Const NUMBER_OF_COLUMNS = 10
[Code]....
Every day we receive a text report via email (only way it can be received), so we take this text report print it out and manually type it into an excell sheet.
I believe this is a waste of time. Is there any way I could take this info and automatically place in the the excell?? Until know I found a text to excell converter and was gonna create a macro to automatically convert this info into the excell report.
I need to move a portion of info over 4 columns. I need to do this after a certain criteria is met.
A B C D E
1 Mem# Mem Name Sta Area
2 123C Joe Smith G bev
3 4 Wine 4.95 6
4 5 wine 5.95 6
5 2 food 6.95 5
6 124G Fred Choi C Bev
7 4 Wine 4.95 6
8 5 wine 5.95 6
9 2 food 6.95 5
A3, B3,c3,d3 need to shift over 4 clmns then when nxt member #(a6) is met rows below need to shift over 4 clmns until nxt mem #, so on and so forth. Please Help. New to the macro scene.
There are a series of input cells in a protected worksheet and when the user hits an enter, tab or arrow key, the selection cycles through them in order. The cycle also restarts when the mouse clicks one of the cells out of order. After I switch worksheets and return to the first worksheet with the code, first it says there is a "Compile Error: Sub or Function Not Defined" and the code "Call SetKeys" in Sheet1 is hilighted. When I ignore that and stop the debugger, there is a "Run-time error '13' Type mismatch" and the code line "If arrIndex > 0 And arrIndex < UBound(arr) Then" is highlighted.
My question is: why doesn't the code work after I switch worksheets? especially given that it works perfectly before I switch worksheets. (ie the file opens on sheet 1 and everything is perfect, click sheet 2 tab and back to sheet 1 - nothing works) I also have yet to figure out why it seems to be necessary to post the same code in both ThisWorkbook and Sheet1.
Private Sub Workbook_Open()
'This code allows the user to change the unlocked cells, but protects each worksheet
Dim wSheet As Worksheet
For Each wSheet In Worksheets
wSheet.Protect Password:="mypassword", _
UserInterFaceOnly:=True
Next wSheet............................
I have a very large spreadsheet that I imported from a Text File into .xls. I need help changing some of the cells around. there is a macro that change the format into the desired look. It takes me about 4 hours a week to clean up this spreadsheet. This is what is the spreadsheet looks like after importing:
Row 1Column AColumn B
Row 2340 Name
Row 3
Row 4
Row 5Actual
Row 6Activities
Row 7AAAAAA16:34
Row 8BBBBBB35:08
Row 9CCCCCC0:02
Row 10DDDDDD57:25
Row 11EEEEEE8:56.....................
