I want to move to the next row but i don't want to make another format just when i begin to write in the next row the format appear automatically like previous row ?
Note : format include formulas ,borders and colors every thing in previous row ...
I have a spreadsheet that I need to rearrange to improve readability. I have an example attache, which is easier to understand than describing it, but I'll try:
I want to start in a1, move to a2
copy a2 to b1
delete line 2 (the previous lrow 3 now becomes row 2
if a2 > 0.01, skip it and
move & select cell a3
... and repeat the above logic, on the next series of cells...
E.g.
copy a3 to b2
delete line 3 (the previous lrow 4 now becomes row 3
if a3 > 0.01, skip it and
move & select cell a4
...and repeat the sequence again.
=IF(AND(EOMONTH(TODAY(),COLUMN()-2)<TODAY(),(TODAY()<EOMONTH(TODAY(),COLUMN()-1))),Sheet2!C10,"NO VALUE")
The above formual resides in each cell in row 1 column g inclusive.
The question is when I move over columns the previous column with figure is wiped out because false "no value" becomes true.
How do I stop the previous data from being wiped out once I move on in columns?
do a conditional format rule that will highlight every other row of my excel spreadsheet when the value in a specific Column (say Column A) differs than the previous.
I've attached a sample worksheet with what I want it to look like after the conditional format rule is applied (every other row highlighted in light blue). The rule needs to apply to all rows in the worksheet beginning with ROW 2 (I don't need the rule to apply to the column header which is in ROW 1).
I have a row with values in successive cells. Some cells are blank. I want to conditionally format the cell text colour based on the value compared to the previous populated cell (i.e. compare A3 to A2. If A2 is blank, compare it to A1).
View 9 Replies View RelatedI have a goal set for the year. With conditional formatting, each month will be set to either red or yellow based on where it stands in relation to the goal. I would also like to show an increase or decrease in productivity for each month. I tried to use conditional formatting with the formula:
=IF(C2=D2, "", IF(C2<D2,"↗","↘")).
The formula works on its own without the conditional formatting so I am not sure what I am doing wrong. I've attached a sample with all the conditional formatting and formulas in place.
I'm looking for a macro to select data from a larger data set, and then put it in another worksheet. Basically, I want to select any cell in column A that contains "SO5" and move those to the column A of a separate worksheet. Then, for each cell that contains "SO5" would like to move to the right 5 columns and down 3 rows and select from that cell all the way to the end of the table. There may or may not be data in all of the table cells, so the selection should be based off of the column headers which will always have values. I would like to take that data and put it with the corresponding "SO5" in the new sheet.
Here's a sample:
MacroSample.xlsm
This is a simplified version, but I'm trying to get the data from sheet1 into the format in sheet2. Keep in mind that the number of columns and rows may change so it needs to be as dynamic as possible.
I've got a workbook with a sheet named Data that has the information laid out in a single row. The data can't be fit onto a single sheet for printing / viewing so I've got a second sheet named Presentation that the data get's laid out to 2 rows so that it can be viewed / printed on a single page.
I'm handing this off to non-technical people so I need an easy way to populate the presentation sheet with the data. I've layed the data out using =Data!A1 however, the drag auto-fill doesn't properly fill it down since it's single row to double row.
Example of Data Sheet
Patient
Chart
[Code]....
see attached file. Need to find latest non blank value - in attached file it is highlighted in yellow. From there, want to summarise 26 weeks back so, in the attached file:
Row 2 would be finding 750 and summarised back 26 weeks from 30 sep 2012
Row 3 would be finding 2250 and summarised back 26 weeks from 2 dec 2012
Row 4 would be finding 5000 and summarised back 26 weeks from 4 nov 2012
is there a way to stick a few row of cells together so that when i move one they all move.. i have some rows that when i sort them i want them to move together with the other ones..
View 9 Replies View Relatedi use a worksheet.change() sub in the vba of the worksheet itself, not a new module.
I want to check that when a certain value is deleted, the user really wants to do this (and attach a routine to this to delete the entire row, shift etc). so far piece of cake, but where the .... can i find the previous value of the cell in case the user decides he made a mistake. the standard VBA sub creates a target as range, but there doesn't seem to be a target.value.previous, or something to that effect, or for that matter something like a worksheet.beforechange() sub
how to find and restore a value which has been deleted in excel in the worksheet using VBA?
is there a way for a udf to return the cell's original value instead of an error.
ie. the UDF in the cell returned a value from a database. now if i move the database and reopen this sheet, excel will try to recalculate and if it doesn't find the database it will return an error. instead of that i just want excel to return whatever was in the cell, before it had to be recalculated.
I have an excel document which I am trying to automate using VBA. I have two headings which have the same text every month but the month value must change.
Basically I’m looking for the last day of the previous month. So if it was 05th April 2007 I want to return 28 March 2007. I just need to obtain the last day of the previous month in the following format ’28 March 2007’.
I need to paste Entire row in one sheet( Sheet1) to the previous row in other sheet(Sheet2) ex: If i copy 3rd row from one sheet(sheet1) than it must be copied to 2nd row in other sheet(sheet2)
Sub try()
Sheets("Sheet1").Select
Range("b2").EntireRow.Copy
Sheets("Sheet2").Select
Range("b2").EntireRow.Previous.Select
ActiveSheet.Paste
End Sub
I have built a compiled a workbook which figures out the daily business in my club, Staff Rota, business done, wage slips, and everything else I need. Well, everything except the stock element.
I need the current week to look up the previous weeks stock levels on each item, when the previous weeks workbook changes it's name every week. At present I name the sheets by the week ending date, i.e. 12-04-14.
I have a data table with dates and marks by 0 and 1.
I need a formula, if a date selected from data table, to find first next or previous matched date.
At attached table you can see all detail and explanation.
match dates.xlsx‎
I've got a workbook that increments in sheets for each new week. I have a cell showing the current week number for that sheet ( lets say cell C1) and any formulas that need to reference data from the previous sheet do in 'indirect' function which basically looks at the current week number ( lets say week 20)in cell C1 and minus's 1 to navigate to the previous week (week 19).
I was wondering if there was a way to reference the previous sheet purely by the order they're in.
So say i have 5 sheets named "1,4,5,8,9" and these represent week numbers so the sheet named '8' in cell C1 would have '8' standanding for the week number but cells that wanted to reference the previous sheet couldn't do the 'indirect' C1-1 as there is no 'week 7'.
The weeks used could vary alot so a formula to reference the directly previous sheet is needed.
ok, thought best if i show you the actual formula
=IF(ISBLANK(C12),"",IF(ISERROR(VLOOKUP(C12,INDIRECT("'"&($AG$2-1)&"'!$C:$AG"),28,FALSE)),G12,SUM(G12,VLOOKUP(C12,INDIRECT("'"&($AG$2-1)&"'!$C:$AG"),28,FALSE))))
the '$A$G2-1' part is the bit that redirects to the previous sheet based on it's name, what i think i really need is to replace this part with a 'PrevSheet' function but i'm unsure how.
If I erroneously saved over an excel document that is stored on an external drive, is there any way to restore the previous saved document, or am I screwed.
The thumb drive is plugged into a computer that gets backed up onto a network server, but I assume that the external thumb drive is not backed up with the c drive and r drive on the server.
Sheet summary2 has the table. And I am looking to compare and add the data (from all sheets Date 1 to Date31) . I am looking to add those values (yes as 1) in my summary 2 sheet for the range E3 to H14 ...if it mathces as MF8330 or x543 or c5045 or x940.
View 4 Replies View RelatedIn Excel VBA, is there a way to get the beginning date and the last date for the previous month from TODAY()?
i.e. If TODAY is Jan 3, 2014, then I would like to have the beginning date as Dec 1, 2013 and the end date as Dec 31, 2013.
i.e. If TODAY is Mar 18, 2012, then I would like to have the beginning date as Feb 1, 2012 and the end date as Feb 29, 2012 (yes 29, not 28).
So basically, I need to have the AI to know the beginning of the year (January 2014 - takes Dec 2013) and if it happens to be February, the 'end date' is either 28th or 29th depending on the year.
I have a report that is run everyday showing a list of orders, on separate tabs based on facility code, that has all kinds of information. I want to be able to take today's file, and have it lookup any comments I posted on the previous day's file.
I've been messing with code all morning and can't get it right. I think my problem is the vlookup part, and I don't think my loop is right either. Here's a little bit of the code i'm trying:
I've found on this newsgroup a function to get the previous sheet
name
Function PrevSheet()
On Error GoTo EndFunction
Application.Volatile True
PrevSheet = Application.Caller.Worksheet.Previous.Name
Exit Function
EndFunction:
With Application.Caller.Parent.Parent.Worksheets
PrevSheet = .Item(.Count).Name
End With
End Function
when i put =PrevSheet() i get the previous sheets name
What i want to be able to do is use this in place of directly
referencing the sheet name in my code as follows...
=IF(G4-J4<0,G4-J4,G4-J4)+'Week 1'!H4
So i want to be able to replace Week 1 with PrevSheet but i've tried
and falied on this. eg...
=IF(G4-J4<0,G4-J4,G4-J4)+PrevSheet()!H4
Could someone show me the correct syntax for this.
I would like to have a "PREVIOUS" navigation button in a workbook that goes back to the previously activated worksheet, which may or may not be physically the previous worksheet in the workbook. In other words, if I go from Sheet #1, to Sheet #3, to Sheet #5, I'd like to return to Sheet #3 from Sheet #5 (rather then navigating back to Sheet #4).
"Open VB editor and double click 'Thisworkbook' and paste this code in on the right:
Private Sub Workbook_SheetDeactivate(ByVal Sh As Object)
lastsheet = Sh.Name
End Sub
Then right click 'ThisWorkbook' and insert module and paste this code in
Public lastsheet As String
Sub Select_Last()
Sheets(lastsheet).Select
End Sub
Whenever a user changes sheets, the name of the last sheet is now held in the variable 'Lastsheet' so if you assign a shortcut or button to the code then the last used sheet will be selected."
My problem is that when I want to assign the macro, I can't find macro name that looks anything like the above in the drop down list of Macro Names. how to assign the macro to a button?
Yesterday (13/03/2007) was the 9th working day of the month (basing a week on Mon – Fri) – today is the 10th working day
Is there any formula, or mix of formula’s I can use to automatically calculate this?
I have a month number in H2 (1-12). I want a formula that will give me the previous month number. So, if h2 = 1. I need my formula cell to equal 12.
With "edit directly in cell" turned off, if you double click through in a cell containing a formula to the cell being refferenced, is there a quick way of getting back to the original cell you clicked on?
View 9 Replies View RelatedI have a DDE-based worksheet, that is obtaining data from Townsend Analytics' RealTick Server software. One of my cells is a DDE formula that retrieves the current BID ask price, for a given stock.
When a new BID price comes in to my designated cell, I need to somehow capture the existing BID price, before this new one updates in the requisite cell. I want to be able to store this "old" value in another cell.
Unfortunately, there is no "pre-cell" event trapping. I've tried to work with the worksheet_change event, which passes an argument of the effected cells, but the cell value has already changed, by the time this event has been called.
This problem sounds simple, but I am at a loss for a solution. Does anybody out there in EXCEL-land have a solution ?
I have a folder containing excel files with dynamic suffix names. I have files for all days starting from the 1st of the month – for example : Performance_01012010.xls, Performance 02012010.xls, Performance_03012010.xls till Performance_31012010.xls.
I want a VBA code to retrieve the date out and change it automatically (means it should add 1 automatically to the previous date). For example, if I open Performance_05012010.xls, my macro should SAVE AS this file to Performance_06012010.xls.
I am writing a macro that goes from one sheet to another sheet to copy data but then must return to the 1st sheet to paste it.
Is there a command for returning to a previous sheet.
Note that the sheets may not necessarily be in consecutive order ie. the 2nd sht may not be immediately after the 1st sheet in the sheet tab order.
The spreadsheet will be made up of a number of sheets that can use the same macro to reference a master sheet to copy and return data.
Attached is a sample of excel file,
its a simple spreadsheet that suppose to track a usage of items that were taken out of inventory,
but at the same it needs to be printer friendly (that's what's causing all the problems),
it got messy when I had to carry over from previous row,
I had to manually enter under "Quantity ch." in order to have correct amount under "Left" column, (see row #4)
I think I can eliminate whole "Carried over" column if I create a formula that will enter data into B4 only if J3 has a number, I also need to copy the same formula's down each column,
