With "edit directly in cell" turned off, if you double click through in a cell containing a formula to the cell being refferenced, is there a quick way of getting back to the original cell you clicked on?
View 9 RepliesI need to copy a changing source cell, paste its value into another specific cell (always the same), and then return to the source cell for continued action (ie range selection, copy & value paste, which I can code).
This action is then followed in the next cell to the R of the first cell copied, etc to end of data. I can code the move to the R.
How do I return to the source cells as part of a loop?
Specific notes included in attached - I hope I've explained it clearly.
I'm listing through sheets and have Sheet2 for drop-down lists.
Sheet2 is not visible, but when I click on Cmdbutton It appears so that I can change values in drop-downs. When I hide Sheet2 again, I want to be back on sheet before Sheet2.
My code for open and close sheet2 :
[Code].....
How can I do that ?
I have a macro that unprotects a worksheet copies data from that worksheet and pastes it into a newly created and saved workbook. However I have two problems
1) I'm attempting to copy the data from the first workbook by selecting all cells and then when switching to the new workbook, select all cells and the paste special (values) then paste special (formats). This works when recording the macro but when I attempt to run it it bombs out.
Cells.Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Selection.PasteSpecial Paste:=xlPasteFormats, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
2) How do I get the macro to switch back to the workbook it got its data from. The name of the source workbook varies and there may be from 2 to 15 workbooks open. Is there a previous active workbook command? or do I need to create some kkind of temporary value to hold the file name of the source workbook.
I am working within a workbook with many worksheets and I want the ability to go back to the previous sheet I was on (example - I am on sheet 23, go to sheet 16, I want to be able to have a button or link that takes me back to sheet 23)
View 9 Replies View Relatedhow to go back to previous page in internet explorer using vba.
View 2 Replies View Relatedlet's say I run a macro from a button on sheet 3, macro process on sheet 10. Is there a way that the macro would automatically go back to sheet 3? Like a "Back" button on IE. I can't code Sheets("sheet 3").Select because I want it to do the same thing on sheet 4,5,6...
View 3 Replies View RelatedI have a layout something like the following:
A1
A2
A3
[Code]....
Where each (i.e., A1) represents a location. I have tried to use a coordinate system but this will not work for the back-to-back locations. (Assuming each location is 2 feet wide, For example A1 to C1 is 4 feet apart, not 2 feet (as Euclidean or rectilinear would calculate it as).
Would there be a way to incorporate an if statement for those locations that are back-to-back? As a rectilinear distance calculation would work as long as the locations are not part of the same "block".
Ultimately I am looking to have a matrix which contains all the distances between each location:
A1
A2
A3
B1
[Code].....
see attached file. Need to find latest non blank value - in attached file it is highlighted in yellow. From there, want to summarise 26 weeks back so, in the attached file:
Row 2 would be finding 750 and summarised back 26 weeks from 30 sep 2012
Row 3 would be finding 2250 and summarised back 26 weeks from 2 dec 2012
Row 4 would be finding 5000 and summarised back 26 weeks from 4 nov 2012
I have a form that loads and depending on the word selected in the drop down the following code loops through cells Q2:AC2 until it finds the word in one of those cells (the word will always be in one of the cells)
Code:
For Each c In Range("Q2:AC2").Cells
If c = period Then
c.Select
[Code]...
The active cell it finds will always change, i know I need something to code the active cell back but I don't know what it should be.
I know this is a sooo basic question but I can not for the life of me remember how.....
when I am on a excel sheet I can not seem to move from quare to square qiththe arrow keys.
It just now takes me all the way to the left or all the way to the right and not from cell to cell from left to right.
I know its something rather simple yet I can not seem to figure this out.
I have no problem with this on 2003pro.
If I've defined borders for a range of cells and then, changing my mind, change it to "No Borders", those cells are still different than the normal, non-formated cells. Is there a way to get back the default cell bounders?
View 3 Replies View RelatedTrying to word this right. I have one cell with a date of 01/01/2010. I have other cells that I want to be equal to this cell plus 1 or more months.
For example A1=01/01/2010
I want A2 to = 02/01/2010 based on one calendar month entered into A1. So if A1 changes 03/01/2010, A2 will = 04/01/2010.
I'm trying to copy data from one excel sheet to another excel sheet. However, the data to be copied is dependent on the 'client name'.
To explain this further, in the first list I have a detailed report on our clients and the services provided to every employee of that company/client.
However, the sheet two only needs the names of the employees that belong to a specific client.
This can be done manually by setting a fliter on the name of the client/company, but I need to be automated. To ensure only that specific company/client company's employee name is copied.
Trying to get a record of who authorized spending in one of my worksheets and when they did it
I had some VBA code in one of my worksheets which added a time stamp and a user ID to two different cells after the user enters their name. Why it is no longer working, though I suspect after moving the worksheet around.
I would like my users to type their name into cell G65 (which is actually merged from G65-K65). Once the user enters their name, cell L65 (which is actually merged L65-O65) populates with the current time stamp. Also, when the user enters their name into cell G65, I would like cell P65 (which is actually merged into P65-S65) to auto populate. I would like this all of this to go down through line 70.
I have to macros I'm working with the first take a user set range and prints the . Address to a cell.
The second Macro I'm trying to get to look at that cell and pull out the range. So is there an opposite fuction to .
Address that will convert excel format to a VBA Range format. Ex A cell with $A$1:$A$2 to Range("A1",A2")
Macro 1
Code:
For j = 1 To x
c = 1
For i = 1 To ws.Range("AD" & rc).Value
ws.Range("AE" & rc).Value = Application.InputBox
(Prompt:="What is the Heading of Data set #" & c & " Table " & tc & " This entry may repeat", Type:=8)
[Code] .........
Macro 2
Code:
'A lot of code here but I want to be able to set multiple ranges to the ranges list in the cell values.
rng(2) = sh(0).Range("AG2").Value
How to read and set a cell backcolor in VBA ?
I've tried all sorts of things ( interior. colour, interior.colorIndex) but nothing gets the correct color.
macro which can paste the value from A1, to another B1 and when A1 is edited again, pasted it in B2. This will probably go on and on until B30. I have tried the if else then in Macro, and even the if elseif, but both don't go futher than B2. E.G A1=1 B1=1 A1=4 B2=4 A1=3 then nothing happens to B3. If there is a way to make this work, it will be great. The way i am tryin to get it is to have =if(B1="","",1) for each cell from C1:30 and with C31 the formula "=count(C1:C30)+1". Then i formated C31 to a custom and make it so that before numbers, there is an B. This means that if B1,2,3 and 4 and numbers in them, then C31 will read B5. That will be the cell i want my next record to go. I would prefer it if there is just a code that i can enter that will go to the next cell when it knows the current cell has a digit in it but if i have to, the count way will do,
View 9 Replies View RelatedI have a worksheet with pricing & part numbers on sheet1. I put a formula on sheet2 that puts the lowest price in colum C of sheet2. Now I need to also get the part number from the cell before. So if the lowest price is in cell E3 I need to also get the part number in D3, and put it in B3.
I want to copy formula from previous row to next cell when i enter something in perticular cell.
i.e
--Colomn A --- Colomn B -- --------Colomn C
1 01-09-07 ----- John ----------=vlookup(b2,$s$1:$t$10,2,false)
2 01-09-07 ----- Smith -------- =vlookup(b3,$s$1:$t$10,2,false)
3
4
5
Now if i enter date in cell A3 then cell C3 should be automatically filled/copy formula as celll C2. and so on......
then if i enter data to A4 then cell C4 should be automatically filled/copy formula from cell C3.
I have also attached example file.
VBA code in worksheet won't revert a changed cells color back to 0(white) after removing the comment.
Observations: code does set the desired cell colors to Yellow after inserting a comment, however removing said comment, and re-activating the worksheet does NOT reset the color after deactivating/re-activating the worksheet.
[Code] ......
Code:
Private Sub ComboBox1_Change()
ActiveCell = Me.ComboBox1.Value
End Sub
How do I get focus back to the sheet or cell instead of the ComboBox ?
I have a DDE-based worksheet, that is obtaining data from Townsend Analytics' RealTick Server software. One of my cells is a DDE formula that retrieves the current BID ask price, for a given stock.
When a new BID price comes in to my designated cell, I need to somehow capture the existing BID price, before this new one updates in the requisite cell. I want to be able to store this "old" value in another cell.
Unfortunately, there is no "pre-cell" event trapping. I've tried to work with the worksheet_change event, which passes an argument of the effected cells, but the cell value has already changed, by the time this event has been called.
This problem sounds simple, but I am at a loss for a solution. Does anybody out there in EXCEL-land have a solution ?
I'm trying to make cell values in a range change so they appear blank when a checkbox is checked, and when it is unchecked, I need the original value to appear. I have the following so far:
Private Sub CheckBox1_Click()
If CheckBox1.Value = True Then Range("BTS").Value = ""
End Sub
...However I do not know how to change the cells back to the original value before it was made blank.
I am running an Index, Match off of totals, what I would like to do is when the formula finds the column_index_num to move up one row and bring that value back.
For example: if I am going to sheet2 and my formula would normally pull back the information on row 7 with a column_index_num of 5 (or column E), I want to bring back the information on row 6 column E.
How do I add the variable to bring back the information one cell above?
I want to lookup some data and bring back the info in the last populated cell on the row, rather than column 4. I have written the below but it is bring back info from Column Index number 4.
=VLOOKUP(D4,'A2'!A:Z,4, FALSE)
If I want to create a column of numbers, say 1 2 3 4 5, I can simply add +1 to the previous cell and then use "fill down" to generate my number sequence. How would one generate a column of numbers that repeat once? e.g.: 1 1 2 2 3 3 4 4 5 5, etc
View 3 Replies View RelatedHow could i change this formula so
If the previous cell "filled with a number" in column D is equal to C17 Then C18 otherwise c17
This is the formula
This formula is in D38
=IF(DAY(A38)=DAY($C$13),$C$17,)
This formula is in D65
I also need to apply the same to this formula
=IF(MOD(ROW(A38)-MATCH($C$13,A:A),7)=1,$C$17,)
We have a sizeable Excel workbook that contains many worksheets for various things, everything works smoothly except for one minor niggle.
I am looking for a formula that references to a cell on a previous worksheet, the worksheet could be named anything (eg A1, B, 2, 3.4, etc). Then to add 1, ideally the first worksheet inserted must equal, say, 0 BUT can reference the sheet previous as this is a constant; so something along the lines of...
Cell A1 =magic formula
Cell A2 =A1+1
This is to get a vlookup to work consistently.
OR another option is, for the worksheet to reference an already populated worksheet and read down a table by adding one to reference the cells. Eg first sheet reads ='schedule'!A13, the next sheet added would read A14 then A15 etc...
OR a worksheet (like page numbers) count into a cell onto each worksheet inserted, eg on worksheet 6 in cell A1 the number 6 would be inserted then worksheet 7 would have 7 inserted into A1 etc..
[Code] ......
What is wrong with above code? I am not able to select previous A15 cell, when macro is selected from C1 cell ( B row is filtered to hide ).