Goto Previous Sheet
Apr 3, 2007
I am writing a macro that goes from one sheet to another sheet to copy data but then must return to the 1st sheet to paste it.
Is there a command for returning to a previous sheet.
Note that the sheets may not necessarily be in consecutive order ie. the 2nd sht may not be immediately after the 1st sheet in the sheet tab order.
The spreadsheet will be made up of a number of sheets that can use the same macro to reference a master sheet to copy and return data.
View 6 Replies
ADVERTISEMENT
Aug 10, 2012
I have some code below. I have error handling in place for when it tries to open a specific file. If it isn't there then user has option to continue and ignore this file, or browse and select a new one.
The problem is, when the user wants to ignore the file, the "Resume Next" continues to run the VBA assuming the file was ok i.e. the code after the line to open the file. What I would like is for it to skip the succeeding code and go to look for the next file.
Below is the VBA:
Code:
For i = 0 To 2 Step 1
'add in error handling for if the file is missing
On Error GoTo MissingFile
Workbooks.Open Filename:="\hbeu.adroot.hsbcdfsrootgb002hfcfinance01fnce" & qfolder & "Data" & qfile(i), UpdateLinks:=False, ReadOnly:=True
[Code] .........
Missing File:
qMissingPrompt = "There was an error opening data file. Click OK to browse or Cancel to ignore and move to next file"
qAns = MsgBox(qMissingPrompt, vbOKCancel)
'click cancel - ignore error and move onto the next file
If qAns = vbCancel Then
[Code] .......
So, where it says Resume Next, currently it will start running the following (after On Error Goto 0)
Code:
Set datawb = ActiveWorkbook
range("A2").Select
Do Until ActiveCell.Value = ""
etc.
What I would like it to do is go back to is to go to the next i
Code:
For i = 0 To 2 Step 1
Or even to go to the 'Next' statement at the end so that it moves onto the Next i and tries to open the next file.
View 2 Replies
View Related
Sep 2, 2009
What I want todo is When a sheet is not found to go to another module and keep running the macro.
If Not SheetExiste("10x1") Then GoTo
NextModule
Else
Sheets("10x1").Activate
End If
Function SheetExiste(SheetName As String) As Boolean
' returns TRUE if the sheet exists in the active workbook
SheetExists = False
On Error GoTo NoSuchSheet
If Len(Sheets(SheetName).Name) > 0 Then
SheetExists = True
Exit Function
End If
NoSuchSheet:
End Function
View 9 Replies
View Related
Jan 29, 2007
The cell is activated in a worksheet highlighting the name of another worksheet. What code do I use to have the macro recognize that name and goto that other worksheet?
View 3 Replies
View Related
Nov 21, 2009
I have copied a sheet, moved it to the end and renamed it with a date that is in cell "A1"
Now after that process is finished I need it to update the date in cell "A1" of the newly created sheet with the next day's date.
I am stuck however referring to the previous sheet to update the date value in "A1"
View 7 Replies
View Related
Feb 9, 2009
what im hoping to do is when i press macro button"click to sort" on sheet totals
it will automatically input the totals from "TOTALS" underneath the right name and put the date in column a the trouble is the cells are dependant on the sort so if i was to press "click to sort" now it would transfer this data to sheet "PTS AND DATES"
09/02/09 in cell a2
1146 in b2
861 in c2
860 in d2
849 in e2
806 in f2
the very next time i press it , it will put data into row 3.
View 13 Replies
View Related
Nov 24, 2009
I've got a workbook that increments in sheets for each new week. I have a cell showing the current week number for that sheet ( lets say cell C1) and any formulas that need to reference data from the previous sheet do in 'indirect' function which basically looks at the current week number ( lets say week 20)in cell C1 and minus's 1 to navigate to the previous week (week 19).
I was wondering if there was a way to reference the previous sheet purely by the order they're in.
So say i have 5 sheets named "1,4,5,8,9" and these represent week numbers so the sheet named '8' in cell C1 would have '8' standanding for the week number but cells that wanted to reference the previous sheet couldn't do the 'indirect' C1-1 as there is no 'week 7'.
The weeks used could vary alot so a formula to reference the directly previous sheet is needed.
ok, thought best if i show you the actual formula
=IF(ISBLANK(C12),"",IF(ISERROR(VLOOKUP(C12,INDIRECT("'"&($AG$2-1)&"'!$C:$AG"),28,FALSE)),G12,SUM(G12,VLOOKUP(C12,INDIRECT("'"&($AG$2-1)&"'!$C:$AG"),28,FALSE))))
the '$A$G2-1' part is the bit that redirects to the previous sheet based on it's name, what i think i really need is to replace this part with a 'PrevSheet' function but i'm unsure how.
View 11 Replies
View Related
Oct 5, 2005
I've found on this newsgroup a function to get the previous sheet
name
Function PrevSheet()
On Error GoTo EndFunction
Application.Volatile True
PrevSheet = Application.Caller.Worksheet.Previous.Name
Exit Function
EndFunction:
With Application.Caller.Parent.Parent.Worksheets
PrevSheet = .Item(.Count).Name
End With
End Function
when i put =PrevSheet() i get the previous sheets name
What i want to be able to do is use this in place of directly
referencing the sheet name in my code as follows...
=IF(G4-J4<0,G4-J4,G4-J4)+'Week 1'!H4
So i want to be able to replace Week 1 with PrevSheet but i've tried
and falied on this. eg...
=IF(G4-J4<0,G4-J4,G4-J4)+PrevSheet()!H4
Could someone show me the correct syntax for this.
View 14 Replies
View Related
May 1, 2013
Below is a macro I'm trying to create. The basically it's supposed to be a quick simple macro to save lots of time. I want to select current tab, move/copy (create copy) to the end....then select the tab I've just copied and copy paste special the values (then rename the tab to todays date) FYI the tab I'm copying is called rebuy shipping.
However, I want to then do the same at a later date with the most recent tab, but with the below code it always selects and copies the original tab:
Sub macrorebuy1()
'
' macrorebuy1 Macro
'
' Keyboard Shortcut: Ctrl+k
'
Sheets("Rebuy Shipping").Select
[Code] .....
I assume this is a simple error. I've tried inserting Activesheet.previous.
View 2 Replies
View Related
Jan 13, 2011
We have a sizeable Excel workbook that contains many worksheets for various things, everything works smoothly except for one minor niggle.
I am looking for a formula that references to a cell on a previous worksheet, the worksheet could be named anything (eg A1, B, 2, 3.4, etc). Then to add 1, ideally the first worksheet inserted must equal, say, 0 BUT can reference the sheet previous as this is a constant; so something along the lines of...
Cell A1 =magic formula
Cell A2 =A1+1
This is to get a vlookup to work consistently.
OR another option is, for the worksheet to reference an already populated worksheet and read down a table by adding one to reference the cells. Eg first sheet reads ='schedule'!A13, the next sheet added would read A14 then A15 etc...
OR a worksheet (like page numbers) count into a cell onto each worksheet inserted, eg on worksheet 6 in cell A1 the number 6 would be inserted then worksheet 7 would have 7 inserted into A1 etc..
View 14 Replies
View Related
Aug 22, 2014
I'm listing through sheets and have Sheet2 for drop-down lists.
Sheet2 is not visible, but when I click on Cmdbutton It appears so that I can change values in drop-downs. When I hide Sheet2 again, I want to be back on sheet before Sheet2.
My code for open and close sheet2 :
[Code].....
How can I do that ?
View 2 Replies
View Related
Nov 14, 2008
I am working within a workbook with many worksheets and I want the ability to go back to the previous sheet I was on (example - I am on sheet 23, go to sheet 16, I want to be able to have a button or link that takes me back to sheet 23)
View 9 Replies
View Related
Jun 29, 2009
After a formula to copy the contents of a cell in the previous sheet in a workbook, so that if I was to copy the last sheet in a workbook the formula would automatically reference the cell from the copied worksheet and so on if I copied tht one.
Hope this makes sense I have a lot of formulas referencing the previous sheet and everytime I copy this sheet to create a new sheet I have to change the sheet number in the formulas.
eg, in sheet 8 this formula get info from sheet 7 cel J30 ='7'!J30 when i copy the sheet to create a new one (Sheet 9) I would like the new formula to automatically be ='8'!J30.
View 9 Replies
View Related
Sep 6, 2007
I have created a toolbar that has "Previous Worksheet" and "Next Worksheet" buttons on it with the following macros assigned:
Sub NextSheet()
On Error Resume Next
If ActiveSheet. Name = "Problem Listing" Then
MsgBox "This is the last worksheet."
Else
ActiveSheet.Next.Select
End If
End Sub
Sub PreviousSheet()
On Error Resume Next
If ActiveSheet.Index = 1 Then
MsgBox "This is the first worksheet."
Else
ActiveSheet.Previous.Select
End If
End Sub
This seems really simple but the code crashes after 4 or 5 repeated clicks of the button.
View 4 Replies
View Related
Apr 4, 2014
I found some VBA code that saves the previous value entered into a cell and displays it as a comment. I've attached that workbook as an example, but I want to change 3 things.
1) I only want to capture the previous values from Sheet1.Column1 (you'll see the example captures changes on the whole sheet1).
2) I want to 'paste' the previous value of Sheet1.Column1 in the corresponding row of Sheet1.ColumnD (i.e. the previous value of A5 will be displayed in D5). The code currently pastes the value in the corresponding address in sheet2.
3) I do not need the comments part. Simply displaying the previous value in the corresponding row of Sheet1.ColumnD is good enough.
View 2 Replies
View Related
Feb 28, 2007
I'd like to make a template so that when it is opened the previous month name is inserted in the sheet name. The reason I want to use previous month is that normally this report is created in the month following the month being reported. So it is opened, months are updated, then the user saves as xls. Ideally I guess sheet would not have the month on the template.
The name of the sheets are shortened months like "Dec Results Bob" and there are 8 of these.
I can tell it might start:
Private Sub Workbook_Open() (or would .xlt be the same?)
but that's about it. I made a macro of renaming sheet but that didn't really tell me if I could insert the Month there.
View 9 Replies
View Related
Aug 13, 2009
if it is possible te refer to a cell in another worksheet.
I have 10 worksheets in sheet one I put in cel A4 a digit en sheet 2 I put the formula that refers to sheet 1 cel A4.
Now I want a formula that refers to sheet -1 so in sheet 3 the formula automatically refers to sheet 2 cel A4 and in sheet 4 the formula automatically refers to sheet 3 cel A4 without corrections to the formula.
View 9 Replies
View Related
Dec 10, 2012
see attached file. Need to find latest non blank value - in attached file it is highlighted in yellow. From there, want to summarise 26 weeks back so, in the attached file:
Row 2 would be finding 750 and summarised back 26 weeks from 30 sep 2012
Row 3 would be finding 2250 and summarised back 26 weeks from 2 dec 2012
Row 4 would be finding 5000 and summarised back 26 weeks from 4 nov 2012
View 7 Replies
View Related
Apr 17, 2014
I currently have a large spreadsheet that multiple people fill out. Each person fills out all the information in a row. At the end of the row, I would like a button that says "Generate Form" so that when clicked, a new sheet automatically opens with a template form that I created and is already filled out with the information that was just inputted into the spreadsheet. Also, there are four different template forms that could generate. For example, there are forms A, B, C and D. If the user inputs "B" into the first column of the row, then when he goes to click "Generate Form", a new sheet is created with all the information filled out in Form B.
View 3 Replies
View Related
Jun 28, 2012
let's say I run a macro from a button on sheet 3, macro process on sheet 10. Is there a way that the macro would automatically go back to sheet 3? Like a "Back" button on IE. I can't code Sheets("sheet 3").Select because I want it to do the same thing on sheet 4,5,6...
View 3 Replies
View Related
Jan 2, 2009
I am want to copy a formula across several work sheet and have the formula always take data from previous work sheet.
2) I am working with this formula =C12+INDIRECT((MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,256)-1)&"!"&"C12")
and it comes from this thread http://www.excelforum.com/excel-gene...orksheets.html. I have included a worksheet attachment that has explanations
View 2 Replies
View Related
Oct 24, 2008
How do I use the GoTo so that I can Specify A line of Code to go to...
for example
View 5 Replies
View Related
Mar 16, 2009
I have some coding under the property list command button which filters the date 3 times and copies the filtered data to another sheet. This works with data in the sheet, however if there is no data on the sheet I get an error message.
There is a line that says on error goto reset1 on the first filter and goto reset2 on second filter (and so on) which works on the first filter but not on the second or third filter. I have attached the file.
View 2 Replies
View Related
Feb 13, 2010
I have a drop down box linked to cell A2 for example, when the change is made on the drop down box the linked cell returns the value 1,2or 3. I'm not sure if I require a code or an 'IF' command - but what I would like to achieve is that say when 2 is selected I want to goto sheet 3 A1, if 3 is selected then sheet 3 A2 and if 1 then nothing happens. Or can I make the function dependant on what the drop down box displays e.g Correct, Not Correct and Requires Change. (1,2 and 3 respectively).
View 3 Replies
View Related
Feb 25, 2013
What I am trying to accomplish with the code below is that if sheet statusReport does not have any information on cell N2, then execute the code after NextLine:
If there is information then perform the Else statement and continue through the end of the code. However, I am getting an error of Else without If. If I remove the Else, then my the code below NextLine: does not execute.
I narrowed down the issue to the GoTo placement, but I don't know of any other way I can skip the For Loop after the If/Then statement. I tried doing an On Error, but there is no Error, the cell checks empty.
I am hitting a brick wall.
Code:
Sub copyeeInfoToClientSheets()
Application.ScreenUpdating = False
With Sheets("byEmployee")
Set rng = .Range("A2", .Range("A" & Rows.Count).End(xlUp))
End With
For Each WS In Sheets(Array("allEmployeesAnnualized", "allEmployeesHourly", "allEmployeesSalary"))
WS.Rows(7).Resize(rng.Count).Copy
rng.Copy Destination:=WS.Range("A6")
[code]....
View 1 Replies
View Related
Jul 10, 2008
I have a wicked wide spreadsheet that has 76 dates. These dates are in weekly increments. (IE 7/4, 7/11, 7/18)
I already have it set up to highlight the current week that I'm in, and there is an arrow above the column. Can I make a button to go to the current week? Like today, I would go to week 7/11.
I saw something with find.max, and give the date in Excels number format. Is this the right way to go?
View 9 Replies
View Related
Oct 31, 2008
i have this code that gives me 1st row of data , from Row 10 of every sheet in workbook, how can i modify to give me row 11 ,12,13,14,15,16 as well upto row 21 if there is Data in Col C ( max range is C10:C21) ,
For intX = 1 To Sheets.Count
For intY = LBound(arySkipSheets) To UBound(arySkipSheets)
If Sheets(intX).Name = "MachCapRpt" Or Sheets(intX).Name = "MachAdSht" Or Sheets(intX).Name = "Times" Or Sheets(intX).Name = "MachSchd" Then
Else
.Range("A" & intNextRow).Value = Sheets(intX).Name
.Range("B" & intNextRow).Value = Sheets(intX).Range("B10")
.Range("C" & intNextRow).Value = Sheets(intX).Range("C10")
.Range("D" & intNextRow).Value = Sheets(intX).Range("E10")
.Range("E" & intNextRow).Value = Sheets(intX).Range("H10")
.Range("F" & intNextRow).Value = Sheets(intX).Range("M10")
.Range("G" & intNextRow).Value = Sheets(intX).Range("W10")..............
View 9 Replies
View Related
Jul 23, 2009
I want to find the cell location of the largest value in a specific column.
for example: column C has 5 rows of different values : 5, 12, 4, 7,9 and I want to find the cell reference of the largest number which is 12.
I know that I need to use "Large" function in order to find the largest number, but what do I have to do in order to find the cell location of it?
View 9 Replies
View Related
Oct 10, 2008
I'm using a on error goto approach, heres the code.
View 2 Replies
View Related
Dec 3, 2008
I have this bit of code and I am curious why when the activecell is J29 it will not goto line 20 it just keeps running to the next line?
View 4 Replies
View Related
