I was trying to use Sheet1 (data input sheet) to collect 33 values and write them to Sheet2 as a row. I wanted the user to be able to make changes/corrections. So if the set of data with same date and shift number is entered for a second time, my macro should be able to over-write the existing row in Sheet2. Have been digging for days yet with no avail.
I'm using Win XP pro and Excel 2003.
Is it possible to overwrite an existing .csv file with
The command :
ActiveWorkbook.SaveAs FileName:=fName, FileFormat:=xlCSV
Or does it need to be Killed first ?
Plus do I need any of the options such as Create Backup, AccessMode As etc.
When I use a macro to refresh all pivot tables, I get a whole bunch of messages popping up, asking me if I want to overwrite the existing cells. Is there a way that I can say no to all of these messages automatically?
View 6 Replies View RelatedI have an Excel sheet that I convert to PDF --here is Example of the name after PDF creates"Morning Report_08.16.14" , When it runs it just overwrites the file automatically if one was already on that date - I would like it to prompt to overwrite & if they choose 'yes' to overwrite the file and if not they can change the name If the new one is in addition to the one that already exists and I want it to save the new file with in the same folder.
Also when the current code is run if the PDF was left opened it stops the macro - Is it possible to see if that file is open and if so close it down so the code will work or is it possible to overwrite the file when open.
[Code].....
I can't get the Displayalerts = False to work as it's supposed to when analyzing data running the correlation add-in. (ATPVBAEN.XLAM!Mcorrel)
For each loop the alert is displayed which I don't want it to.
The code below is just an example. I have several rows which I will loop through and therefore the Displayalerts=False must work.
Sub test4()
With Application
. ScreenUpdating = False
.DisplayAlerts = False
.EnableEvents = False
End With
Just wondering if it is possible to have a formula in a cell but over write it with other digits while preserving the underlying formula?
I can lock the sheet/workbook but cant edit the cells once this is done?
I'm hoping to be able to delete what ever I have overwritten and for the formula to then take effect again.
I am trying to create a macro which copies the data of one column every time I click on it. However, every time I click on it I overwrite the data I already copied. What do I have to do, that instead of overwriting my data it copies it to the next free column.
See example attached. Macro example.xlsx
if i run my macro that saves a sheet as a certain name and then prints it, it works, but if i run my macro and the file already exists it asks me to overwrite it. If i select yes it prints it and carrys on with the rest of the macro, (good). If i select no the macro fails. How can i get it so if i hit no, it runs the rest of the macro after the print command?
View 2 Replies View RelatedI am trying to set up a macro in excel that will include a save as. This should overwrite an old file. The problem is that I can't get the macro to overwrite. Instead the popup "Do you want to overwrite?" appears and I have to click "OK" manually. Can this be done automaticaly? What is the VB code for it?
View 9 Replies View Relatedin cell A1 i have the balance. i would like to record the balance every time it reaches a new high in cell B1. how would this be possible please using excel 2007
View 9 Replies View RelatedColumn A (Plan Date) and Column B (Date Recieved) contain date value. If B2 is blank, A2 will maintain the date entered in it. However if B2 has date (either earlier or later than A2) it will supersede the date with the date value in B2.
View 9 Replies View RelatedI've struggled to find the code to unzip files using VBA but I finally found it and it works (using Shell).
The problem is that I want to unzip all zip files in a folder but my zip files contain 3 files:
1 csv file that I want to keep and 1 xml and 1 txt file that I want to delete.
I can't just unzip everything and deal with the txt and xml later because the xml and txt files all have the same name. So if I don't do anything, I have a series of overwriting messages prompting me to click yes or no. So what I want is either to delete xml and txt one by one after they are created or get rid of the overwriting prompt. I've tried to put a kill or delete file just after the unzip command but it doesn't work - it's telling me that the txt file doesn't exist (should I add some sort of refreshing command ?) and I couldn't find anything on google about overwriting text or xml files.
I've just written a bit of looping vba script that generates an overwrite alert (i.e. "Output range will overwrite existing data. Press OK to overwrite..."). This is fine and was purposely built into the script, but I want to be able to automatically ignore these alerts and loop through the script unhindered.
View 4 Replies View RelatedI have the following code which copies a sheet to another workbook and renames it with the current date. However I need it to check if there is a sheet already existing in the other workbook with todays date first. If there is then it should delete the old sheet and copy the new sheet or just overwrite it.
View 4 Replies View RelatedI would like to code a Userform Command button to save data by overwriting a specific row of data. The specific row is to be based on data matching in column A and column B. I'll give an example
Worksheet = "Failures"
Row 1 - Column A - Column B - Value
Row 2 - 12/3/2012 - FOX ------ 23
Row 3 - 12/3/2012 - CEF ------ 24
Row 4 - 12/3/2012 - COT ------ 23
Row 5 - 13/3/2012 - FOX ------ 56
Row 6 - 13/3/2012 - COT ------ 23
Row 7 - 14/3/2012 - FOX ------ 26
I would like the code that would search for the specific row (e.g Row 5 discovered by searching for 13/3/2012 and FOX) in the "Failures" Worksheet and then overwrite it with the following data values from a Userform called "QC"
(TextBox1) (TextBox2) (TextBox3)
13/3/2012 --- FOX -------- 24
i have searched this and can't find exactly what i'm looking for. I am hoping some one can alter a piece of script i am using. See script below. Currently it adds a comment in a text box to a new row and i would like it to add it to the end ( cell 15) of the last row used, not a new row. I am a newbie to VBA and am self teaching so the obvious is not really obvious.
Private Sub cmdErrorButton_Click()
Dim iRow As Long
Dim ws As Worksheet
Set ws = Worksheets("Log Book Data")
'find first empty row in database
iRow = ws.Cells(Rows.Count, 1) _
.End(x1up).Offset(1, 0).Row
'copy the data to the database
ws.Cells(iRow, 15).Value = Me.txtError.Value
ws.Cells(iRow, 14).Value = Now()
End Sub
I have a spreadsheet where there is an option to either select a pre-priced item from a drop down list or type in manual entries. If the data is entered manually, I have included a formula to obtain cost data. For example, column A has the number of labor hours and column B multiplies Column A by $500. However, if a person chooses to select a pre-priced item from the drop down menu, can the pre-entered data from the VLookup list overwrite the formula? I do want it to overwrite if it is possible for it to do so.
View 2 Replies View RelatedI have a spreadsheet that's generated from a download. I need to modify one column of cells based on multiple criteria. Started to try with a nested If statement, but soon passed the limits allowed. Not sure if some kind of VLookup or VBA formula. To summarize what I'm looking for: If column A has a value of any of the following (10D, 11Z, 10Z, 2CS), then I need to change the Rate in column D based on the Years left to maturity in column B. The Rate percentage to be used is based upon the table shown in the attached spreadsheet. In addition, there is an exception if Column A has a value 2CB and an inventory # of 9300276 or 9300277 in column C, then I need to change the rate in column D based on the table as well. Otherwise the rates stay as originally imported.
View 3 Replies View RelatedI want to be able to enter a value into a cell (within a specified range) and have it automatically multiply by a set value and overwrite the original entry with the result so making it all happen within one cell. The set value would be another cell on that sheet.
So the range for example is "H17:H74" and the value I want to multiply by is "D8"
Is this possible?
I've looked at another forum but it wasn't working when I wanted to define the set value as a cell.
I am currently using a macro to copy a sheet from a closed workbook in to my current workbook. However this copying is based on the sheet name. At present when I run the following code
View 11 Replies View Related I have created a userform with multipage, has two page that add new record in a excel sheet. Data has a unique reference no.(TxtRef.Value) for each record. I am trying to add a button to load the added data for a specific record using reference no back to userform so that it can be updated and overwrite back to the sheet in the same row, So far it is adding new record correctly. I do not know how to populate all the fields of the of an existing record and overwrite it back to the same row instead of adding a new record. Below is my codes
[Code].....
I presently have a macro that, when run, takes to conents of C4 and C6 and saves a new version of the file being worked on into a folder on my desktop. I love the macro with the exception of one part: I don't want to be prompted to overwrite the file if it already exists. How can I change this macro so that, when pressed, it overwrites the file without prompting the user and waiting for their answer?
Here is the current
Sub SaveIt() ...
i have a master workbook. it gets used daily as a template and saved as another file name. the file name is generated by 5 cells that each contain different data (date, street, town, state). is it possible when i hit the save or save as button/icon, for a file name to be automatically generated from the cells i have data in??
PostPosted: Wed Oct 15, 2003 5:12 pm Post subject: Re: change default saveas name for new file w/o saving
Okay, so you want to create a workbook via code, prompt the user for a SaveAs name, then save this workbook?
Sub CreateAndSave()
Dim wb As Workbook
Dim SaveFileName As Variant
Set wb = Workbooks.Add
ChDrive "C"
ChDir "C:VBA Code"
SaveFileName = Application.GetSaveAsFilename("It is a new file.xls", _
"Microsoft Excel Workbook (*.xls),*.xls")
On Error Resume Next
If SaveFileName False Then wb.SaveAs FileName:=SaveFileName........................
I have created a workbook with several subsheets for different departments in my company to fill in there respective data that feeds a main sheet that colates all the info. I've designed a macro that basically breaks the department sheets into seperate workbooks so that i can send them to the different people to complete. When the files return, I could sit there pasting the data back into the main workbook but really I would rather have a macro that overwrites the sheet in the main work book with the completed sheet of the same name.
Maybe I havent done this correctly, but when i try to move the sheet from the department workbook back to the main workbook it just creates a (2) copy. I want it to replace the sheet rather than create a copy.
I have date in column D and have a formula of
View 5 Replies View Relatedvoice Example.xls
My situation is as follows: I have multiple workbooks that each contain three worksheets, the worksheets from one or more of these workbooks needs to be added to another workbook.
Since the worksheet names in all workbooks are the same, I need to add the data from a cell (account number) in the file to the existing worksheet names. Using the attached file as an example, the value of cell A8 on the DMC-UPS-Summary worksheet needs to be added to each worksheet name in this file.
I have created a spreadsheet which serves as a reporting portal - if you select a product from a drop down, the spreadsheet automatically updates with data regarding that specific product. I would like to give my worksheet the ability to select a new item from the dropdown (that part i can do) and then print each of these product reports (1 page each) and aggregate them into one large pdf.
View 2 Replies View RelatedI have a button setup with a macro to copy cells in a column and paste them into a row on another sheet. One of the values in the column needs to be checked in the other sheet before being added.
After the button with the macro is clicked
- If the value entered in column A (sheet 1) exists in column A (sheet 2) proceed with the rest of code.
- If the value entered in column A (sheet 1) does not exists in column A (sheet 2), Popup menu to enter details of value (just a menu with an input box and instructions), then the macro should enter the details of value (entered by user into the popup menu) in column B of sheet 3, then proceed with the rest of code.
I posted this with a different explanation before and didn't get a response so I am hoping that this is a thinned down version of my request and is more specific. Please let me know if you need more info.
how can i automatically add one day to an existing day..
a
1 Monday
in b1 what would be the formula for tuesday..
=a1+1
?
I would like to add Cells(18,3) also along with the below code which should increase its existing value with 1.
Sub newinv()
Range("C20").ClearContents
R = Sheets("Sheet2").Range("B65536").End(xlUp).Value + 1
Cells(15, 4) = R
End Sub
Jane.
