I've just written a bit of looping vba script that generates an overwrite alert (i.e. "Output range will overwrite existing data. Press OK to overwrite..."). This is fine and was purposely built into the script, but I want to be able to automatically ignore these alerts and loop through the script unhindered.
View 4 RepliesI am trying to create a macro which copies the data of one column every time I click on it. However, every time I click on it I overwrite the data I already copied. What do I have to do, that instead of overwriting my data it copies it to the next free column.
See example attached. Macro example.xlsx
I have created a userform with multipage, has two page that add new record in a excel sheet. Data has a unique reference no.(TxtRef.Value) for each record. I am trying to add a button to load the added data for a specific record using reference no back to userform so that it can be updated and overwrite back to the sheet in the same row, So far it is adding new record correctly. I do not know how to populate all the fields of the of an existing record and overwrite it back to the same row instead of adding a new record. Below is my codes
[Code].....
I would like to code a Userform Command button to save data by overwriting a specific row of data. The specific row is to be based on data matching in column A and column B. I'll give an example
Worksheet = "Failures"
Row 1 - Column A - Column B - Value
Row 2 - 12/3/2012 - FOX ------ 23
Row 3 - 12/3/2012 - CEF ------ 24
Row 4 - 12/3/2012 - COT ------ 23
Row 5 - 13/3/2012 - FOX ------ 56
Row 6 - 13/3/2012 - COT ------ 23
Row 7 - 14/3/2012 - FOX ------ 26
I would like the code that would search for the specific row (e.g Row 5 discovered by searching for 13/3/2012 and FOX) in the "Failures" Worksheet and then overwrite it with the following data values from a Userform called "QC"
(TextBox1) (TextBox2) (TextBox3)
13/3/2012 --- FOX -------- 24
I can't get the Displayalerts = False to work as it's supposed to when analyzing data running the correlation add-in. (ATPVBAEN.XLAM!Mcorrel)
For each loop the alert is displayed which I don't want it to.
The code below is just an example. I have several rows which I will loop through and therefore the Displayalerts=False must work.
Sub test4()
With Application
. ScreenUpdating = False
.DisplayAlerts = False
.EnableEvents = False
End With
Without using VBA can you suppress alerts in Excel?
Specifically when you are creating copies of many sheets in a workbook,
"A formula or sheet you want to move or copy contains the name "Month", which already exists on the destination sheet. Do you want to use this version of the name?"
The reason for turning the alerts off is that the answer is always yes and it appears too many time in this workbook.
Students choose different electives, upto a maximum of 20. In the example below, I have shown them with only four electives. Some choices require a pre-requisite subject to be chosen. In the example below, let us assume that you must select WXY101 in your choices if you want to include WXY102 as an option as well. Jane Doe fits this criteria, so there is no alert.
However, John Smith is trying to complete WXY102 without having chosen WXY101, and hence WXY102 appears in the alert column as a problem selection. Note that choosing WXY101 without choosing WXY102 is OK, as you can just complete a pre-requisite subject.
Is there a way I can have an Excel 2003 worksheet notify me of upcoming
dates? Ex: I have a spreadsheet tracking safety course expirey dates, and
would like to have the cells highlight prior to that date, say 1 month in
advance. Will conditional formatting do this.
Using VBA automation - set ObjXL as an Excel.Application
Lots of code and data transfer
then:
3410 ObjXL.ActiveWorkbook.SaveAs FileName:=strSaveAsFileName
3420 ObjXL.Visible = False
3430 ObjXL.Quit
Set Objxl= nothing
should the line be set : ObjXL.displayAlerts = True
- befor the objxl.Quit ?
- before the Objxl.ActiveWorkbook.SaveAs FileName:= aname
how to close the ObjXL with out orphaning a process.
OR???
ObjXL.ActiveWorkbook.Names.Add Name:="Data1", RefersToR1C1Local:=ObjXL.Range("A5").CurrentRegion
Will this line of code create a 2nd instance of Excel?
I'm trying to format a worksheet to show a one year due date with an alert 30 days out so that I can complete the task before the date due. I am using this for a preventative maintenance sheet for respiratory protection equipment that needs to be serviced annually. For instance; if I service a mask today the next service will be in one year. I'd like it to alert me 30 days out. If I could get that alert through outlook that would be fantastic.
View 5 Replies View RelatedUsing the following to open a sheet
Sub Sheet1Print()
Windows("RS1.xls").Activate
Workbooks.Open Filename:=ActiveWorkbook.Path & "" & "Sheet 1.xls"
Application.ScreenUpdating = False
Application.DisplayAlerts = False
Windows("Sheet 1.xls").Activate
ActiveWindow.Close
End Sub
I still however get a promt asking me if I want to update, and a message if i want to save the changes when I close
How do I turn of these alerts.
I just finished a great macro and right at the end of deleting a sheet, I got a message box saying
"Data may exist in the sheet(s) selected for deletion. To permanently delete the data, press Delete"
How can I eliminate this from popping up in the middle of code?
I need to disable all kinds of messages that could appear in front of the user when it opens the workbook. I am already using DisplayAlerts=False and On Error Resume Next? Can we also do this through excel application itself and not using VBA ?
View 6 Replies View RelatedI am trying to hide the excel 2010 application, open a csv file on a network drive, show the excel application.
The problem is a "Downloading" progress indicator appears, during the workbook open event I assume.
Code:
Sub Macro1 ()
Application.Visible = False
Application.DisplayAlerts = False
Workbooks.Open Filename:="S:LOGT5.CSV"
Application.Visible = True
Application.DisplayAlerts = True
I have seen the similar progress indicator during the "Save" event too. How to hide this?
I was trying to use Sheet1 (data input sheet) to collect 33 values and write them to Sheet2 as a row. I wanted the user to be able to make changes/corrections. So if the set of data with same date and shift number is entered for a second time, my macro should be able to over-write the existing row in Sheet2. Have been digging for days yet with no avail.
I'm using Win XP pro and Excel 2003.
Just wondering if it is possible to have a formula in a cell but over write it with other digits while preserving the underlying formula?
I can lock the sheet/workbook but cant edit the cells once this is done?
I'm hoping to be able to delete what ever I have overwritten and for the formula to then take effect again.
if i run my macro that saves a sheet as a certain name and then prints it, it works, but if i run my macro and the file already exists it asks me to overwrite it. If i select yes it prints it and carrys on with the rest of the macro, (good). If i select no the macro fails. How can i get it so if i hit no, it runs the rest of the macro after the print command?
View 2 Replies View RelatedI am trying to set up a macro in excel that will include a save as. This should overwrite an old file. The problem is that I can't get the macro to overwrite. Instead the popup "Do you want to overwrite?" appears and I have to click "OK" manually. Can this be done automaticaly? What is the VB code for it?
View 9 Replies View Relatedin cell A1 i have the balance. i would like to record the balance every time it reaches a new high in cell B1. how would this be possible please using excel 2007
View 9 Replies View RelatedColumn A (Plan Date) and Column B (Date Recieved) contain date value. If B2 is blank, A2 will maintain the date entered in it. However if B2 has date (either earlier or later than A2) it will supersede the date with the date value in B2.
View 9 Replies View RelatedI've struggled to find the code to unzip files using VBA but I finally found it and it works (using Shell).
The problem is that I want to unzip all zip files in a folder but my zip files contain 3 files:
1 csv file that I want to keep and 1 xml and 1 txt file that I want to delete.
I can't just unzip everything and deal with the txt and xml later because the xml and txt files all have the same name. So if I don't do anything, I have a series of overwriting messages prompting me to click yes or no. So what I want is either to delete xml and txt one by one after they are created or get rid of the overwriting prompt. I've tried to put a kill or delete file just after the unzip command but it doesn't work - it's telling me that the txt file doesn't exist (should I add some sort of refreshing command ?) and I couldn't find anything on google about overwriting text or xml files.
I have the following code which copies a sheet to another workbook and renames it with the current date. However I need it to check if there is a sheet already existing in the other workbook with todays date first. If there is then it should delete the old sheet and copy the new sheet or just overwrite it.
View 4 Replies View RelatedIs it possible to overwrite an existing .csv file with
The command :
ActiveWorkbook.SaveAs FileName:=fName, FileFormat:=xlCSV
Or does it need to be Killed first ?
Plus do I need any of the options such as Create Backup, AccessMode As etc.
i have searched this and can't find exactly what i'm looking for. I am hoping some one can alter a piece of script i am using. See script below. Currently it adds a comment in a text box to a new row and i would like it to add it to the end ( cell 15) of the last row used, not a new row. I am a newbie to VBA and am self teaching so the obvious is not really obvious.
Private Sub cmdErrorButton_Click()
Dim iRow As Long
Dim ws As Worksheet
Set ws = Worksheets("Log Book Data")
'find first empty row in database
iRow = ws.Cells(Rows.Count, 1) _
.End(x1up).Offset(1, 0).Row
'copy the data to the database
ws.Cells(iRow, 15).Value = Me.txtError.Value
ws.Cells(iRow, 14).Value = Now()
End Sub
I have a spreadsheet where there is an option to either select a pre-priced item from a drop down list or type in manual entries. If the data is entered manually, I have included a formula to obtain cost data. For example, column A has the number of labor hours and column B multiplies Column A by $500. However, if a person chooses to select a pre-priced item from the drop down menu, can the pre-entered data from the VLookup list overwrite the formula? I do want it to overwrite if it is possible for it to do so.
View 2 Replies View RelatedI have a spreadsheet that's generated from a download. I need to modify one column of cells based on multiple criteria. Started to try with a nested If statement, but soon passed the limits allowed. Not sure if some kind of VLookup or VBA formula. To summarize what I'm looking for: If column A has a value of any of the following (10D, 11Z, 10Z, 2CS), then I need to change the Rate in column D based on the Years left to maturity in column B. The Rate percentage to be used is based upon the table shown in the attached spreadsheet. In addition, there is an exception if Column A has a value 2CB and an inventory # of 9300276 or 9300277 in column C, then I need to change the rate in column D based on the table as well. Otherwise the rates stay as originally imported.
View 3 Replies View RelatedWhen I use a macro to refresh all pivot tables, I get a whole bunch of messages popping up, asking me if I want to overwrite the existing cells. Is there a way that I can say no to all of these messages automatically?
View 6 Replies View RelatedI have an Excel sheet that I convert to PDF --here is Example of the name after PDF creates"Morning Report_08.16.14" , When it runs it just overwrites the file automatically if one was already on that date - I would like it to prompt to overwrite & if they choose 'yes' to overwrite the file and if not they can change the name If the new one is in addition to the one that already exists and I want it to save the new file with in the same folder.
Also when the current code is run if the PDF was left opened it stops the macro - Is it possible to see if that file is open and if so close it down so the code will work or is it possible to overwrite the file when open.
[Code].....
I want to be able to enter a value into a cell (within a specified range) and have it automatically multiply by a set value and overwrite the original entry with the result so making it all happen within one cell. The set value would be another cell on that sheet.
So the range for example is "H17:H74" and the value I want to multiply by is "D8"
Is this possible?
I've looked at another forum but it wasn't working when I wanted to define the set value as a cell.
I am currently using a macro to copy a sheet from a closed workbook in to my current workbook. However this copying is based on the sheet name. At present when I run the following code
View 11 Replies View Related