How To Transfer Names Instead Of The Percentages To Another Cell
Mar 29, 2014
We created the following spreadsheet at work:
Col A. Col B. Col. C. Col D
Names. Week 1. Week 2. Week 3
Angela. 1.171875
Mara. 1.127214
Linda. 2.552553
Margaret. -1.4157
Lisa 0.12432
Joy 1.109654
Winner. 2.552553
2nd place. 1.171875
3rd place. 1.127214
This is a chart recording the percentage of weight everyone loses each week. We input the weight and it calculates the percentage lost. My question is that I would like the names of the winner, 2nd place and 3rd place to transfer down to the bottom not the number. I was told its not possible.
View 9 Replies
ADVERTISEMENT
Jun 27, 2014
I need a formula to create the following:
In Cell F5 is 26, so the percentage should be 101% (100+1). How can I modify the below to add 1% when the number goes over 100%?
Do I have to create two columns? one for the below and one if the F6 is over 100%?
IF(F6="N/A","N/A",IF(F6>=25,1,IF(F6>=19,0.8,IF(F6>=13,0.6,IF(F6>=7,0.4,IF(F6>=1,0.2,IF(F6
View 5 Replies
View Related
Jan 4, 2013
I have a worksheet with many tables that I use in formulas.
I like tables for a couple reasons, one being the ability to insert/delete rows without affecting the rest of that worksheet row.
Also, automatic copy of formulas/formatting is great.
But, what I really like about tables is the ability to use the naming conventions in formulas.
Problem is when I save this worksheet, after I close it and open it back up, all table references in my formulas have been converted to cell references.
Example:
Code:
=IF((SUMIF('Quote 1'!$M$28:$M$43,">"&'Quote 1'!$J$57:$J$60)*'Quote 1'!$G$57:$G$60)+(COUNTIF('Quote 1'!$M$28:$M$43,""&'Quote 1'!$J$57:$J$60)*'Quote 1'!$G$57:$G$60)+(COUNTIF('Quote 1'!$M$28:$M$43,""&tblOSSRV[Min Order Cost])*tblOSSRV[Cost / Part])+(COUNTIF(tblFam[[#Data],[Qty by Factor2]],""&tblOSSRV[Min Parts Per Line])*tblOSSRV[Cost / Part])+(COUNTIF(tblFam[[#Data],[Qty by Factor2]],"
View 4 Replies
View Related
Aug 27, 2012
I use Excel 10 and i'm on Window 7.
I need a formula to transfer the values in on cell to another designated cell. "AM" should be in the cell under "AM and "PM" should be under the cell marked "PM". If there's nothing in the space where AM or PM is, that should be blank.
View 3 Replies
View Related
Jan 22, 2008
I have a Textbox on a Userform that allows users to enter text and code copies the text to a nominated cell on a sheet. My difficulty is that when the text is copied to the cell at the end of each line of text there is a small 'open square' symbol that I would prefer not to show. I can manually delete the symbol but would like it either not to appear of be able to automatically delete it. If I copy the text to a word file the symbols do not appear.
Private Sub CommandButton1_Click()
Sheets("Marketing").Range("b4") = UserForm1.TextBox1
Me.Hide
End Sub
View 5 Replies
View Related
Jan 24, 2009
If i have a basic formula that reads a6=(a2*a3*a4)/a5
i need a5 to be entered as one value but be equal to another. Such as 12=6530 and 10=10380 ...
View 10 Replies
View Related
Oct 27, 2008
I have the following code to transfer a formula to another cell:
View 5 Replies
View Related
Jan 9, 2014
Currently have
Code:
ThisWorkbook.Sheets("Sheet1").Range("B8:G8").Copy
Sheets("Sheet2").Range("A" & Rows.Count).End(xlUp).Offset(1).PasteSpecial Paste:=xlPasteValues
B8 contains a date and on sheet2 i have lots of columns, what i was wondering is If I had lots of Tabs Jan Feb Mar etc would it be possible to transfer the Cells B8:G8 to the tab based on B8
i.e. =if(month(Sheet1!B8)=1, copy B8:G8 and paste in 1st available row on the Jan Tab
or =if(month(Sheet1!B8)=2, copy B8:G8 and paste in 1st available row on the Feb Tab
View 9 Replies
View Related
Mar 22, 2014
I have 2 sheets, A & B. When I type something into sheet A, it goes to Sheet B, but if I change the cell color on Sheet A, I would like that to automatically color the same thing in Sheet B. How can I do this?
View 4 Replies
View Related
Jan 25, 2009
how to take the result of a formula calculated in one cell and show the results in an other cell
View 4 Replies
View Related
Jan 18, 2010
I am trying to get information from 1 sheet to another. What i need to do is take the information from sheet 2 column H2:H26 and put it in sheet 1 cell I4. i already have the vlookup information in the other cells that i need but for what i need this for is different than a vlookup. basically i want to be able to type in a name (from sheet 2) in cell I4 (sheet1) and all the information that i need auto populates for me like i already have. I was able to do this with a drop down menu but that wont work as the information will change weekly,
View 11 Replies
View Related
Dec 2, 2013
I have a spreadsheet with two tabs.
On tab 'sheet1' I input data in cells A1:A5.
On tab 'sheet2' cells G1:G5 are linked to the cells above, so the same data appears.
Now if I go back and highlight cells A1:A5 in yellow on 'sheet1' ..... how do I get G1:G5 to also automatically highlight in yellow?
View 2 Replies
View Related
Dec 11, 2006
I have 2 sheets in an excel folder and in fact I would like to create a macro to tranfer a row of the chart present in Sheet 1 if a cell is matching a condition so that the macro identifies each row of the chart in the Sheet 1 and transfer the row in the other sheet if the value in the column A (Chart Sheet 1) is equal to 1 :
sheets("Global Sheet").Select
Range("A1").Select
If activecell = 1 Then Transfer A1:J1 in the other excel sheet ( anywhere)
View 12 Replies
View Related
Jul 15, 2009
I am dealing with large amount of data.
In the first worksheet, there are multiple comments and I need the property of the cell including the comment to be transferred to the second sheet using a formula.
Suppose in "Sheet1" in cell A5 it says "Number of Sales" with a comment "Check everyday".
Know I need to transfer this to say in "Sheet2" in cell A5. So in A5 of Sheet2 I can type
='Sheet1'!A5
This only brings the text and in this example it would say "Number of Sales" without the comment. All i need is for the comment to be joined with the cell.
I do not how to use Visual Basic and need your help
I cannot use Copy Paste in this case because the file is too large.
If there is no comment it should just write the value of the cell and if no value in cell than it should leave it blank. I will attach a file as a example
View 13 Replies
View Related
May 12, 2009
Money savedMoney Earned NameTotalNametotalNameTotalMarkJanieRobCyndiPamDiana
Here's a tricky one. The chart that shows the four columns are on sheet 1. I need a formula or a VLOOK array that will fill in the 2 columns with the 3 rows shown on the left which will be on a sheet 2. Lets say that all start with A1 in both sheets. The tricky part is, i want sheet 1 to be able to populate onto sheet 2 starting with the Name column first row no matter what name i select on sheet 1. Say that Janie earned money, but Mark didn't. I enter Janies info in Money saved & Money Earned. I get her total, and the end result should be her name showing on sheet 2 in the first row under name and her total showing on the first row in the total column. Also, i would need it to bump one up or dowm to the next adjacent column if i were to go beyond the 3 rows in the 1st set on rows in sheet 2. Say Janie, Rob and Cyndi all had info, but now Mark does, i want to be able to push the others down one and over onto the next set of columns.
View 9 Replies
View Related
Aug 26, 2007
I have various textboxes and they are entering values onto my sheet on my command.
If i say, enter 10 into a textbox, meaning 10%, on my spreadsheet it comes out as 1000% I thought about being clever and putting
range("a1") = textbox1.value / 100
but this brings up an error with the debugger!
View 6 Replies
View Related
Sep 24, 2009
Basic run down of spreedsheet. 2 diffrent sheets formated like a calendar. sheet one is to track minutes tardy for employees at work. Work sheet 2 is to document any weather or other issue that might arive to cause and employee to be tardy.
I have condintional formating set up to change the cells a diffrent color (on sheet 1) if the same day is flagged on sheet 2 as a exceptionalable day. What i want -
When i flag a day as a weather issue or other exceptionalable issue on sheet 2 i place a inserted comment with an explantion. I want this comment to auto transfer to the corrisponding cell in sheet 1 when i place it on sheet 2. I'm not sure if this is possible with Excel 03 but thought i'd ask.
View 3 Replies
View Related
May 23, 2014
I have Information found on Sheet 1. I need the program to take the value found in Column B and try to find matches found on Sheet 2 in Column B. Here's the thing it is only going to take the first 3 characters found in the Cell on Sheet 1. But in sheet 2 it will need to pull all information that matches those 3 characters. I included a sheet on what the finished product should look like for two of the sheets. If the program finds a match it will transfer the original and the copied match to a sheet Named "Name". The correct format can be found on "Finished Sheet Name". If no matches are found it will place the original information from Sheet 1 onto a sheet called "New".
Test2.xlsm
View 5 Replies
View Related
Sep 5, 2008
I need to create a simple code that will allow me to fill out the userform and then use a cmdbtn within the userform to transfer the information from the userform to specific cell in my excel spreadsheet.
View 10 Replies
View Related
Dec 1, 2009
I have a activex multi-selection list box (on a worksheet). It has two columns, referenced from two columns on the worksheet (state abbreviation, state code) AA7:AB58. I'm using the following code below to transfer selections to cell A1.
View 3 Replies
View Related
Jul 10, 2013
I have a userform which stores the backcolour value of some labels in a spreadsheet so that it can be recalled dependent on what month a user selects. The trouble is that in a spreadsheet, I want to use these backcolor values to colour the interior of a cell. However, the values don't seem to be liked by VBA and I get a 'subscript out of range' when I try to match:
Range("SPPCScore").Interior.ColorIndex =
This error comes up against values 65535 and -2147483633
What am I doing wrong? what would be the best way to store a backcolor value in one cell so that it can be used for a cell interior colour?
View 3 Replies
View Related
Jul 21, 2014
I have two sheets with a table on each. Sheet 1 table 1 has a row of data on jobs we are bidding. If we win the job there is a column where we input a job number. What I would like to happen is that when someone enters a job number in this column, it takes that number and the information that is in two other cells in the same row to table 2 on a sheet 2. This will give us a current jobs sheet. I am using Office365 but some users are using 07 maybe even 03.
View 3 Replies
View Related
Jul 12, 2006
I have a workbook with several sheets containing prices of products. One column has the product number and a second column has the price. We just received new prices. Can a macro read the product number from the new sheet, find the same product number on the old workbook and transfer the new price. and than change the price so I know it was updated.
View 2 Replies
View Related
Jul 26, 2007
I have a userform with many textboxes that I am using to collect data which is transferred to a worksheet using a command button on the userform. All data is correctly transferred to the worksheet except for the text box I am using for the date.
The date is transferred from the userform to the spreadsheet but the date is left justified implying that it is text but dates that I have manually entered into the spreadsheet cell are right justified. This may seem picky but I am using a 'count' function within the spreadsheet to determine how many rows contain the date.
I am using the following code which I am entering in the format of dd/mm/yyyy, to to transfer the date to Cell A1 the worksheet 'Results'.
Private Sub CommandButton1_Click()
Worksheets("Results").Cells(1, 1) = UserForm1.Textbox1
End Sub
how to transfer the date to the cell so that it right justified, hence treated as a number within the cell.
View 6 Replies
View Related
Aug 22, 2007
I have a report where, month in month out, i have to append columns on the right, to give a Year to date figure. Now there are many rows with different numbers but one of the columns is call [NOTES]. This is where the user can provide commentry on the weekly figures.
Now whats getting annoying is i have to copy this commentry and then create a comments box then paste the text in there and finally, hide the comment.
So what i want to be able to do is be able to Copy the cell, then, have a right click menu button saying "Paste As Comment", so it paste the selected cells contents into a comment and hides it.
View 9 Replies
View Related
Dec 5, 2013
I have a worksheet, with a "cost" column, and a date column. I have another sheet with dates pre-written, and a cost column as well. I'd like to know how to make the cost from worksheet 1 go to worksheet 2 under cost, but also add up any costs that are on the same date.
View 9 Replies
View Related
Dec 24, 2009
Attached is an example of what I am trying to do.
I am looking to transfer the sums for a calendar month in one column to cells in another location for each month.
I put some notes in the sample attached, I appreicate any help getting this to work.
View 10 Replies
View Related
Jun 26, 2012
I am wanting to transfer data from one sheet to another depending on cell input
Example:
If I enter "2" in sheet1 cell B1, then I want a macro to take A1 to sheet2 but place it in A1 & A2.
Then say I enter "1" in sheet1 cell B2 goto sheet2 and put A2 into A3 and so on.
Depending on the number entered on sheet1 column B, the Macro duplicates the info from Column A in that row into column A on sheet2. ??
View 5 Replies
View Related
Mar 27, 2013
I wanted to separate my cell values with comma into a column
Item
DepIDs
No
IDA
1
2000
1
2000
[Code]...
the output will be below table,
Item
IDA
DepIDs
1
2000
2000
[Code]...
View 2 Replies
View Related
Aug 26, 2007
I thought I had finished my project but I keep getting errors, the latest one being that I have 2 comboboxes on userform "timekeeping". When I press the commandbutton "Submit", I want the values in the textboxes on that form to be placed in the spreadsheet, depending on what the selections the user has made in the comboboxes but I keep getting an error saying that the macro doesnot exist in the workbook even though it does!
The file is too big to upload here so it is found on rapidshare
[url]
View 4 Replies
View Related
