Match Cell Values And Transfer To Different Sheets
May 23, 2014
I have Information found on Sheet 1. I need the program to take the value found in Column B and try to find matches found on Sheet 2 in Column B. Here's the thing it is only going to take the first 3 characters found in the Cell on Sheet 1. But in sheet 2 it will need to pull all information that matches those 3 characters. I included a sheet on what the finished product should look like for two of the sheets. If the program finds a match it will transfer the original and the copied match to a sheet Named "Name". The correct format can be found on "Finished Sheet Name". If no matches are found it will place the original information from Sheet 1 onto a sheet called "New".
Test2.xlsm
View 5 Replies
ADVERTISEMENT
Jan 24, 2009
If i have a basic formula that reads a6=(a2*a3*a4)/a5
i need a5 to be entered as one value but be equal to another. Such as 12=6530 and 10=10380 ...
View 10 Replies
View Related
May 7, 2014
I have two sheets. Sheet A (Receiving Log) contains all orders with NAME (D1) and QTY ORDERED(E1). Sheet B(Component Reject Tag) contains all rejects with NAME(D1) and QTY REJECT(E1). Sheet A and B are Many to Many relationship
What I am trying to figure out is:
Match the names from Sheet B to Sheet A and sum up the QTY REJECT from Sheet B divide by the sum of QTY ORDERED for the NAME from Sheet A.
Business would like to get QTY Reject percentage by each NAME (Supplier)
In a final table lets say Sheet C I would like to see NAME, QTY Ordered, QTY Reject, Ratio in which will allow my to perform a Top 10 suppliers of highest reject percentage.
Another note to mention, Sheet C presumably to have all the formulas as in Sheet A and B will be overwritten and pasted with new data.
View 10 Replies
View Related
Dec 18, 2012
I have a sheet (SHEET1) with a EAN code and a empty column I need to get a colour into from sheet 2.
I have to match EAN codes in Sheet 1, (Column X) with Sheet 2(Column E) and then pull the description from the corresponding row in Sheet 2(Column D).
I am sure I can use the VLOOKUP formular but I dont know how to input the code?
=VLOOKUP(lookup_value,table_array,col_index_num,range_lookup)
View 2 Replies
View Related
May 4, 2007
find attached sheet of example.
In the attachment the supplier sheet is the sheet we get from our suppliers and it shows us the products they have in stock along with the prices and other information. This sheet has over 900 products on it. It is updated daily which we download and then paste it over the existing data.
The Deviltronics sheet is the products we have added onto our website. It has a code in column E which tells us if the products on the supplier sheet is in stock or out of stock. (this was done by the help of someone here)
Both sheets have been cut down considerably so that we can add them as an attachment on here.
So now I am going to tell you what I am trying to do!
What we need is a code that will automatically copy the trade price, suggested retail price and the shipping cost from the supplier sheet and insert it into the Deviltronics sheet next to the relevant product (say in columns F, G and H). This done by matching the product code part numbers in both sheets as done with the existing code on the Deviltronics sheet (column E).
View 4 Replies
View Related
Jun 16, 2013
I need a macro to start at cell "A1" on sheet1 and then find that same value on sheet 2 in column B. Once it finds that value in sheet 2, the code would copy the row related to "A1" (A1:H1) into the row on sheet 2 with the value matching "A1" from sheet 1. Once it has done this I need it to do the same from A2:A598. I thought this code below was working but it seems to erase a row from sheet 2 if it is not present in sheet 1. I need the macro to only update the row if the information in column A on both sheets is the same. Here is the code I am using
Code:
Sub FindStr()
Dim rFndCell As Range
Dim strData As String
[Code].....
View 3 Replies
View Related
Feb 2, 2009
I want to locate the corresponding acct number between worksheets “primary_data” and “qty_movement” and once a match is found (from acct worksheet) then copy over the acct numbers and the share data to the results page. If there is no match I don’t want anything copied to the results page, just ignore that data on either worksheet “primary_data” or “qty_movement”.
•Both ranges on “primary_data” and “qty_movement” worksheet are variable, as accts are left off or kept on depending on the daily activity so the ranges are never set.
•I need to concatenate on “primary_data” worksheet cells A&B&C to get acct number
•concatenate on “qty_movment” worksheet cells B&C (need to keep zeros in front of actual numbers for acct number reasons)
•these accts need to be cross referenced as the accounts on the “acct” worksheet (pre-populated with corresponding acct numbers that never change and will always be on that worksheet)
•If a match is found on the “acct” sheet then I would like it to either replace the acct so they match on both worksheets or just to recognize those accounts correspond with each other and do the below.
•then take the 2 concatenated acct numbers off of “primary_data” and “qty_movement” in the I cells and copy them over to the “results” worksheet as well as the share data from “primary_data (column E)” and “qty_movement(Column D)” and then compare the 2 share amounts on “results(column E)”
i need to elaborate on anything, the attached sample sheet shows what i want to do, but without any formulas or code.
View 5 Replies
View Related
Aug 22, 2007
I have a report where, month in month out, i have to append columns on the right, to give a Year to date figure. Now there are many rows with different numbers but one of the columns is call [NOTES]. This is where the user can provide commentry on the weekly figures.
Now whats getting annoying is i have to copy this commentry and then create a comments box then paste the text in there and finally, hide the comment.
So what i want to be able to do is be able to Copy the cell, then, have a right click menu button saying "Paste As Comment", so it paste the selected cells contents into a comment and hides it.
View 9 Replies
View Related
Mar 27, 2013
I wanted to separate my cell values with comma into a column
Item
DepIDs
No
IDA
1
2000
1
2000
[Code]...
the output will be below table,
Item
IDA
DepIDs
1
2000
2000
[Code]...
View 2 Replies
View Related
May 22, 2007
I have a main workbook that is meant to summarize data from other workbooks
In Row 6 from column H on I have workbook names in each cell
Column G in all workbooks (including the main one) contains our branch #'s for our offices
For each workbook listed in row 6 , I need to open that workbook (I have that setup with the code below---notice there is an AX.xls that is appended to the file names listed in row 6 in order for the names to match what is in the windows directory)
In the newly opened workbook, I need to, for each value in column G, copy the value from adjacent cell in column H (the dollar value) then search column G of the main workbook for a matching branch and paste the value to the appropriate row under the workbook name column (remember workbook names are in row 6)
The trouble is, for each branch in column G in the newly opened workbook that cannot be found in the main workbook, I need to paste the new branch # at the bottom row of/in column G and the $ value (H column value from the newly opened workbook) to the corresponding row under the workbook name column
Sub OpenWBs()
Dim Rng As Range
Dim WB As Workbook
Dim MyPath As String
Dim lastCol As Integer
Dim newRange As Range
lastCol = Cells(6, Columns.Count).End(xlToLeft).Column
Set newRange = Range(Cells(6, 1), Cells(6, lastCol))
MyPath = "F:AccountingAPAdvertising AccountsLA TimesAgentExtractorCompletedLIST"
For Each Rng In newRange '
View 9 Replies
View Related
Feb 26, 2012
I have a workbook that updates from external source and creates sheets depending on a cell range.
I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets
What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far
I get compile error here ........Sheets(ArrSh(1)).Activate
Also need it to work for all the other rows.
Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate
[Code] ......
View 2 Replies
View Related
Jun 5, 2012
I have .csv file from which the data is importing to master schedule. i have a column in .csv file which is spitted into multiple columns. and my need is i have to compare this each individual cell value with the range of header values in master schedule and if match found i have to place that cell in the row.
I am adding 2 attachments one is .csv and other is master schedule.
I couldn't able to find where i have to attach my files.
View 2 Replies
View Related
Jul 19, 2012
Column C5:C9999 & D5:D9999 contains alphanumerical values.
In E5:E9999 i want the result=Column C provided it matches Column D else null.
Ex:
C5=Peter ShowROOM D5=RooM E5=Peter ShowROOM
C6=Peter ShowROOM D6=r sh E6=Peter ShowROOM
C7=PeterShowROOM D7=r sh E7="" (null)
C8=PeterShowROOM D8=P E8=Peter ShowROOM
View 5 Replies
View Related
Jun 27, 2014
write a script to match a cell value then copy and paste the matching row across two worksheets - "Master List" and "Demographics".
These two worksheets have the same cell values in Column A, the key difference is the Column A cell order in the second worksheet "Demographics". This Column A cell order is set arbitrarily by another system and will vary over time.
I would like to match the rows, then paste the three columns from the second worksheet into the first worksheet.
For example:
"Demographics" Worksheet Cell A2 = "Master List" Worksheet A45 - then copy cells A2, B2 and C2 and paste into A45, B45, C45 respectively.
"Demographics" Worksheet Cell A49 = "Master List" Worksheet A12 - then copy cells A49, B49 and C49 and paste into A12, B12, C12 respectively.
I have created a sample spreadsheet here; - List Schema.xlsx
View 2 Replies
View Related
Feb 1, 2007
I am looking for the code to transfer a sheet from one open workbook to another open workbook. I am just wondering what type of code I need to type so that a particular sheet from one workbook goes into a particular workbook that I desire. i.e if there were 10 workbooks open, I want a particular sheet from one workbook to be moved into one particular workbook out of these 10 sheets.
View 3 Replies
View Related
May 31, 2007
Where I work there is a file that we have to submit to management every Friday. This is a raw data file to be imported into another system. With 7 different employees accessing the same passworded file on a network drive, we have had some errors in the external program due to input typos.
I have created a worksheet for employees to input weekly data, ie workorder number, hours worked, etc. all in a neat and defined order. I have also added nested if formulas to validate data length and duplication within a group.
Now I need to transfer just the raw data from the employee entry sheet to a seperate sheet, reformated in the raw data format. This requires copying common data for all workorders worked. I can provide more data examples from work.
I would prefer that the data copy and reformat be done with formulas as the parent company frowns on excl macro's, especially unsigned.
I have 15 rows available to the employee each day to input. One of the problems I have ran across is the raw data format cannot have blank rows or rows with missing data.
View 14 Replies
View Related
Jun 2, 2014
I have a database with all employees in a worksheet. Employees are from eight different divisions (marked with acronym in column C). I have eight additional worksheets - one for each division (names of worksheets will be the same to the entries in column C in master sheet).
I want the information of employees (the whole row) to be transfered to the sheet of their respective division. So, whenever I make a change in the master sheet, the change is effective in division's sheet as well. And if I add an employee to the master sheet, they will be automatically added to the division's sheet.
View 4 Replies
View Related
Dec 15, 2013
[URL]
What im trying to do is match columns A & B from AUDIT Sheet to Columns A & B in MASTER sheet. If they match then pull columns C, D & E from MASTER into AUDIT.
View 9 Replies
View Related
Jan 15, 2010
I get an error message on the "Range(lstRow).Select line. (Method 'Range' of Object '_Global' failed). My goal is to transfer a specific range (C24:H24) to the first available row in Data Entry sheet.
View 2 Replies
View Related
Jan 21, 2010
The first two columns in my document coincide with their respective values. Column A (File Number) is coded for Participant Description (Column B) and the values in each row are associated with one another...
However, I have a 3rd column (Article Number) whose values mean the same as the File Number column, but the the rows don't match up.
What I need is a fourth column. In this column I'd like the value from the Participant Description column to be imputed if the Article Number and File Number column are the same.
An example from the attached spread sheet.
A2 = 7, B2 = 6, C2 = 7 - I need D2 to equal B2
That is easy enough, but this is where I get lost...
A2 = 7, B2 = 6, C3 = 7 - I need D2 to equal B2
View 6 Replies
View Related
Oct 9, 2013
I have a spreadsheet with 2 different sheets (DB and Workings). What i am trying to do is using VBA code is, need to match the state name CT from workings sheets (cell C3) with DB sheet of column B4 to B9 and return the Team values from column A4 to A9 in the row 4 (C4 to E4) of the Workings tabs (highlighted in Red) and similarly for the state name LA i want this process to get repeated.
View 4 Replies
View Related
Nov 18, 2013
I'm trying to format the color of a certain cell, if two values match.
A1=100
B1="Choose"
I want to format B1 to color RED, if A1=any number, and B1="Choose".
B1 contains list-data where you can chose from different values.
So if A1 contains a value, and B1 has not been set a different value than "Choose", format B1 to RED. Which would indicate that you have to set a value for the rest of the worksheet to work.
View 5 Replies
View Related
Jun 24, 2013
I am trying to transfer a set of values from a column on sheet1 into cells on sheet2. Sheet2 contains labels I made up so the cells I want the values transferred to are not in column format. Is there a way to write a formula so that it will transfer the values indirectly? By indirectly I mean that I want sheet1 a1 to go to sheet2 a1 then I want sheet1 a2 to go to sheet2 a32.
View 5 Replies
View Related
Jul 22, 2014
I'm finding it hard to explain what I am trying to do (which may be why I can't find a solution through Google), so I have an example. I am using a much larger spreadsheet than this sample(18,000 rows)
ID
First_Name
Last_Name
Company
[Code]....
I want to highlight rows if there are multiple instances of ID and # values - I included a column at the end showing which rows in this data set would be highlighted.
View 2 Replies
View Related
Dec 10, 2007
Working on an export from an e-commerce application that lists the item purchased, unfortunately not by item #, but rather a lengthy description. I'm trying to construct an item number based on that description which contains several constants.
Each item ordered appears in a single row, comprised of ORDERID, QTY, PRODUCT DESCRIPTION
I have several tables to pick out PRODUCT TYPE, COLOR, SIZE, etc. I need a formula to search to see which of the unique values appears in each in the cell and return the shortcut of that value.
PRODUCT DESCRIPTION example "Sweater - Blue - Large - Wool"
TYPE TABLE:
Sweater SWTR
T-Shirt TSHT
Jeans JEANS
COLOR TABLE:
Blue BL
Green GN
Purple PL
Black BK
I would have separate tables for each part of the description.
The formula I'm seeking would search the PRODUCT DESCRIPTION cell for the range of values for each 'part'. So it would search to see which of Sweater, T-Shirt, or Jeans was in the cell and then return the one that was - SWTR in this example. I would modify this formula for each 'part', in its own cell, and then use an =cell#&"-"&cell#&etc... to combine these returned values.
I know I can write a large if- chain using ISERROR & FIND, though some of these lists will get lengthy.
View 9 Replies
View Related
Aug 31, 2012
I am currently trying to run a macro that will take all of the values from one column in a workbook, copy and paste them in another sheet in the workbook. The data may vary in size and the macro must run until the preceding columns value (on the same row) is empty, which will signify that there are no more values to copy. Also this data may duplicate, which in this case I would only like to paste unique values.
View 1 Replies
View Related
Dec 16, 2008
I have some values in Range F2, F26 ,F48 and so on.
I need to transfer these values using a macro to
C8776
C8777
C8778 and so on.
Since there are a lot values , I would like to have a macro for this operation;
View 5 Replies
View Related
Jan 20, 2010
In a proceedure I'm trying to copy some ranges including: text,cellcolor and borders to a number of different places. What I've got from modifying the macro recorder was
View 2 Replies
View Related
Jul 3, 2014
I have a Userform1 that is launched on a Before_DoubleClick Event. This UserForm1 has a CommandButton1 on it. When CommandButton1 is clicked I would like for it to transfer information into "MySheet" based on the current Cell address. I have the below code but it is not working correctly(The red parts are where I am having difficulty). Here is the Worksheet Before:
Worksheet Click Event is Initialized Assume Active Cell is A2:
Excel 2012
A
B
C
1
BatchDate
BatchNumber
Initials
[Code] ....
MySheetThe data above this instance will be contiguous for Example:
Excel 2012
A
B
C
1
BatchDate
BatchNumber
ID Number
[Code] ......
MySheet
Sheet to Paste Data After Procedure:
Excel 2012
A
B
C
1
BatchDate
BatchNumber
ID Number
[Code] ..
MySheet
Code:
Private Sub CommandButton1_Click()
Dim LastRow As Long
Dim BatchDate As Range
Dim BatchNumber As Range
BatchDate = Range(Selection.Address).Value
[Code] ......
View 4 Replies
View Related
Mar 12, 2009
why the last line below errors when the line before doesn't?
Error 1004 Method ' Range' of object '_Worksheet' failed
Sub tester
Dim wbThis As Workbook
Dim wsSrce As Worksheet
Dim wsDest As Worksheet
Dim lastSrceRow As Double
Dim lastDestRow As Double
Set wbThis = ActiveWorkbook
Set wsDest = Workbooks(wbThis.Name).Sheets("Detination")
Set wsTmpl = Workbooks(wbThis.Name).Sheets("Source")
I've been through countless threads, specified xlapp.... etc.
View 4 Replies
View Related