Transfer Row Data From One Table To Another If Cell Is Not Blank?
Jul 21, 2014
I have two sheets with a table on each. Sheet 1 table 1 has a row of data on jobs we are bidding. If we win the job there is a column where we input a job number. What I would like to happen is that when someone enters a job number in this column, it takes that number and the information that is in two other cells in the same row to table 2 on a sheet 2. This will give us a current jobs sheet. I am using Office365 but some users are using 07 maybe even 03.
I have created a userform in excel which I want to transfer data over to access with.
I have built a command button to send data to access code below.
Private Sub CommandButton2_Click() Dim cn As ADODB.Connection, rs As ADODB.Recordset Set cn = New ADODB.Connection cn.Open "Provider=Microsoft.Jet.OLEDB.4.0;" & _ "Data Source=filepath.mdb" Set rs = New ADODB.Recordset rs.Open "Main", cn, adOpenKeyset, adLockOptimistic
rs.Close Set rs = Nothing cn.Close Set cn = Nothing
This works fine when all comboboxes and textboxes have entries in but doesn't work when the have been left blank and there will be occasions when they can be left blank.
On my data tab I've got a column for "review date." Some of those cells are blank. When you go to the pivot table, the respective cell for that blank.review date cell displays the date 1/29/14. There is no data in the cell on the data tab, so why would it be displaying 1/29/14? I want it to either say "blank" or just be blank. It does this for every review date cell that is blank.
On a daily basis we have to manually fill in a time sheet, and I was trying to think of a way where I could just copy and paste it into excel and it would show me on another sheet the total amount of hours I have worked over the month. This gets slightly more difficult, as different clients have different campaigns, and you can work on any variety during the day (however, not all of them do).
Typical raw data looks like this:
Client Hours Campaign
Rubber gloves 4.1 SEO
[Code] ....
Therefore I would like to combine the data and then send it off to another report that looks like this:
Rubber gloves - SEO Rubber Gloves - PR Bottled Water
1/12/12 4.1 2.3 2.8
[Code] .......
This would allow me to keep a check of how many hours I am working on each campaign over the month, and ensure that I don't run over on time. I have the boxes prepared for the 2/12/12, 3/12/12, etc. where I paste the raw data, and let excel break it down and put it in the report automatically.
I have been entering the data manually so far and I'd quite like to avoid a pivot table or chart (but i am open to it).
The way I have this set up right now is that data is being submitted by an Infopath Web Form and emailed to me, it produced an XML file with values for all the possible entries for each person but only certain departments are filling in certain blocks.
That XML file is uploaded into a worksheet and then I'm trying to process data off that table to get the information I'm needing. I'm trying to divide data if a certain piece of the formula matches (IF CCU & August then Divide F column on same line by G column on same line and display the result)
I'm also trying to ignore empty blocks which is where my problem is at. So far I've come up with
[Code].....
but that is only working if the data happens to match on the same line in the data table.
Added the excel workbook: patientdashboardexperience.xlsx
I have a workbook with several sheets containing prices of products. One column has the product number and a second column has the price. We just received new prices. Can a macro read the product number from the new sheet, find the same product number on the old workbook and transfer the new price. and than change the price so I know it was updated.
The below code deletes blank columns in two work books. Now I would like to add to this code by performing an additional action on the worksheets. Below is the code that I have so far:
Sub Commandbutton2() Dim iCol As Long Dim Isheet As Long Dim Item As Worksheet Dim MFBooks(2) As Workbook Dim lngIndex As Long Set MFBooks(1) = Workbooks("MF BANK EXPOSURE SUMMARY.xls") Set MFBooks(2) = Workbooks("MF CP EXPOSURE SUMMARY.xls") For lngIndex = 1 To 2 For Each Item In MFBooks(lngIndex).Worksheets .....................
I've got a work book (2010 btw) with several tabs.
On tab 5 is an inventory list with "Stock Number and Nomenclature" merged in row A7-Q7 and down to row A23-Q23.
Beside each Item there are “Required Quantities (EA)" in Colum U7-U23. After an inventory is executed, The values are placed in Colum V7-V23 (INV).
Stock Number Nomenclature EA Inv 34419-43450 Mission Modu 1 “X”
After inventorying.... I need a formula that "compares the required quantities (EA) to the actual inventoried values (X)".
IF the actual inventoried quantities are equal to or greater than "Required Quantities" - Display Nothing in tab 6
IF the actual inventoried quantities are LESS than the "Required Quantities" - Display “Stock Number and Nomenclature" in tab 6 for a shortage list, ignoring the "blank cells".
I have a large table about 2000 rows x 2000 columns (small extract below) and i need to get all the non-blank data out of it into just 3 columns ignoring any blank cells. Column A is the customer account number and the other columns contain the prices for the part numbers as described in row 1.
a/c - part no 002000 S01000 S01020 S01040 S01060 S01080
[Code] .......
What I need to end up with is list of Account/Part No./Price like this...
A/C Part No. Price 00017391 S01020 7.2100017391 S01060 10.4500017391
[Code] .........
There will be about 70,000 lines from the table I have.
I have made a table which contains 2 date columns, Both formatted as date (dd-mmm-yy), the second column is calculated as the first column, + 30, The dates work out fine when adding to a date in the first columns, but from a blank cell it displays 30-Jan-00.
e.g Started Finishes
12-Nov-13 12-Dec-13
30-Jan-00
09-Nov-13 09-Dec-13
11-Nov-13 11-Dec-13
Rather than delete the rows with the blanks in the Started column, is there a formula that I can use so that the cells in the "Finishes" column is left blank when the "Started" cells are blank?
The current formula for cells in the "Finished" column is:
Currently I am working on a system uploading data from word(with what i think has a script) into a database one by one.(template of somesort) the data is stored into the database in word format.
can i place all the data in rows then get excel to transfer cell content into word and wait for it to upload then clear the contents(word) then do the next row(excel) until it did every cell that's filled? do i need any other applications for this one or can excel alone do it? i'd also like to add a new tab to excel for the command on when excel will do this.
how to create a pivot table that does not skip through blank data cells. I have a pivot table with data for several dates, but not every date has a data point. I would want the pivot table to show all the dates with the blanks, rather than skip through the days with no data.
I have a table of data 300 rows long with protected formulas in adjacent columns and at the bottom of the column. Some of the data cells are blank but the non-blank cells are contiguous and start at the top of the range (see Before Example).
a macro that would allow users to insert a blank cell at any point in the data table without losing any of the other data or disrupting the formulas. In other words I want to move all the data from that point to the bottom of the range down by 1 row. A before and after example for a smaller 10 row data set is shown below.
Before
AB1data aformula 12data bformula 23data cformula 34data dformula 45data eformula 56data fformula 67 formula 78 formula 89 formula 910 formula 1011formula Aformula B
After
AB14data aformula 115data bformula 216data cformula 317data dformula 418data eformula 519 formula 620data fformula 721 formula 822 formula 923 formula 1024formula Aformula B
I'm using pivot table and i want to erase the blank cell that come out with pivot table and replace it with number 0 or -, how can i do that ? i've be try to do this by go to the table option and in the empty cells check list i've put 0 or - but the pivot table still come out "blank".
I am trying to randomly select 10 data from a table by using index formula. But there are some blank cell in the table so It kept returning 0 in the cell.
I'm trying to create a table that adjusts dynamically to how many cells in a row have text in them. In other words, when a cell is left blank, the entire row should not appear in the table.
I've tried the following code:
Sub test() Dim i As Integer Dim nrrows As Integer
[Code]....
When I run this code, it hides all rows, even the ones that aren't blank. why this might happen and how I can make it work?
I am creating a tracking spreadsheet where i can toggle between months (attached). It returns data properly when I select January or February from the yellow highlighted dropdown list. However, when i choose March, it returns 1/0/1900 because no data has been entered for March (table array) on the AAAG tab. How do I write the formula to return a blank cell on the summary sheet when no information has been entered into the table array yet?
with the data in the attached sheet, I create several different pivot tables that need show the count of the information in the columns M:DU. My issue is that the data is sent to me from a third party and the columns contain zeros that cause the counts to inflate.
What I would like to be able to do is run a macro that will search out any zeros in M:DU and replace them with a blank cell.
Unfortunately the number of rows increases with every monthly reporting cycle so the macro would need to be able to accommodate for that.
I am wanting to have certain cells of data from one worksheet appear on another worksheet once the cells on the first sheet have data entered in them.
I find that I can do a simple formula to copy the cell but I want the cell to remain blank until data is added in the first sheet (it will be a mix of text and numerical entries).
I use excel and would like to know how to copy a large volume of address data but at the same time filtering out irrelevant data placed under each other in a row, in this case, air compressors air conditioning web address etc ( see below for example). I need the first 5 lines only. The rows of unwanted data are irregular i.e some have 10 lines, others 5 , and others 2 or one line which makes using a formula difficult as there is no consistency. The data eventually need to be placed horizontally in columns to be compared to other address lists. To make matters worse, the text data has been merged and wrapped.
there is data going to excel from database. The data is something like jan to dec sales and in a arbitrary fashion. now if there wont be data availble for say month of july then nothing will be there.
Now i need to nicely formulate data from jan feb ..Dec and in same order in another cells. Now for empty cells data after formualting it is coming as #N/A. and by this i am getting a same thing in the application where this excel sheet is being used. So for eliminating it i need to use 'if' such that if it is undefined or NULL then blank should be there in the formulated cell.
I have a spread with five tabs. Each tab is a person's job responsibilties for numerous properties. Each person works with a property called Orange Avenue. I want to create a tab for JUST Orange Avenue items but want it to automatically pull any and all info from each tab where that person's Ornage Avenue duties are.
