Transfer A Row If A Cell Is Matching A Condition
Dec 11, 2006
I have 2 sheets in an excel folder and in fact I would like to create a macro to tranfer a row of the chart present in Sheet 1 if a cell is matching a condition so that the macro identifies each row of the chart in the Sheet 1 and transfer the row in the other sheet if the value in the column A (Chart Sheet 1) is equal to 1 :
sheets("Global Sheet").Select
Range("A1").Select
If activecell = 1 Then Transfer A1:J1 in the other excel sheet ( anywhere)
View 12 Replies
ADVERTISEMENT
May 12, 2009
Been looking all day in the answered threads for an answer and no luck, so I turn to again: I need to find an address of a cell matching a condition e.g. I have a results output in varying length but having fixed block structure. I want to find the block staring address as in a Match("test", "A:A", 0).Value command but apparently its an illegal command. I’ve been thinking of a Vlookup(test,”A:A”,0,false) structure but got no idea how to make it return the address instead of a value.
View 3 Replies
View Related
Apr 16, 2007
I need to delete a row of data based on information in two other sheets. Basically, I have a summary page and two other raw sheets which i import data - Today / Yesterday - these sheets are updated daily.
I have 3 different conditions to update my data in sheet " Stock".
1. If not in today and yday / delete row
2. If status in today = "New" copy paste over to stock
3. If in yday not in today / copy and hardcode.
I have briefly done up 2&3 but would appreciate if anyone would like to share how he can do it. Otherwise.. just help on (1) will be greatly appreciated....
have attached a working file..
View 9 Replies
View Related
Feb 25, 2012
I have a few row headings on a fresh worksheet (called "New" like so for A1, B1 and C1 for example):
Date Amount Title
I then have raw data on another worksheet. This data has many column headings (more than on the "New" sheet) and the data for that heading in the column underneath heading. So the Date column will have say 50 rows of dates in the column. What I want to do in VBA is match the headings from the "New" worksheet to the raw data worksheet ("Data") and then copy and paste the data into the column under the row heading in "New" from "Data".
with the code for this? I have tried using MATCH and I can't get it to work. I'm also looking for an efficient way to do this I'm sure I am doing it a very inefficient way.
View 4 Replies
View Related
Sep 18, 2006
1) I have a Master worksheet that combines/appends data from 5 worksheets. The data in the 5 worksheets is cleared on a daily basis once data has been transferred (using a macro) to the Maser sheet.
2) I use the Match and Index formula for the 5 sheets. Column A "Symbol" being the primary value
Problem:
I have Matching column headings " Date" in 2 worksheets, I can only use date data from one of the sheets that contain the date column data. Here is the formula I use in the master to accept data from the worksheet
=If(Sheet1!C2=0,"",Sheet1!C2)
Sheet1 has the column heading "Date" that is linked to Master Worksheet column Heading "Date". Is there a possible way to re-write the formula where It can accept data from either sheets instead of only 1 sheet?
Going back to the fact that I have 2 date columns in 2 worksheets
Lets say for example;
I have Symbol AAA in Sheet1
I have Symbol ZZZ in Sheet2
I have Symbol GGG in both sheets......................
View 3 Replies
View Related
Jul 24, 2007
I am trying to have an order form auto populate information, however I have run into a small problem when doing so. I am unable to use VBA because it is locked by whoever originally created the spreadsheet so I need a formula solution if possible. I would like for the worksheet "Order Form" to auto populate the type of printer cartridge when there is a 0 in the column "On Hand" on the "List" worksheet. I know a loop could do the trick but I was wondering if maybe a vlookup or if statements could get the job done. Here is a completed sample of what I would like to happen.
View 4 Replies
View Related
Jan 6, 2014
I have following set of data...
Row#2 Gets information from another database depending upon country and product code. In example Country is India and Proudct is brake. From source it will fetch info.
Starting Row#6, all the products are listed down. My requirement is what ever the data gets reflected in Row#2, should get copied and pasted to corresponding product code starting Row#6. In this example I have highlighted Brakes product data.
So when product in B2 is TEE, the corresponding Row#7 should get values only from Row#2..
A
B
C
D
E
1
Country
Product
Q1
Q2
Q3
2
IN
BRK
63104.91
60236.51
60236.51
[Code] ..........
View 5 Replies
View Related
Jun 13, 2007
im currently using a static array to select multiple sheets at once which works alongside another Sub
Sheets(Array("Group1", "Group2", "Group3", "Group4")).Select
i have a button that creates a new sheet and names it "GroupX" X being the next number, it automatically adds on the right number by itself and it works fine...
i want it my array to be dynamic so that i dont have to manually edit the array and the macro every time i add a new sheet.
i have tried things like:
Dim MyArray As Variant
Dim Shts As String
K = Sheets.Count - 4
For p = 1 To K
Shts = "Group" + p
Redim MyArray(K) As String
MyArray(K) = Shts
Next p
Sheets(MyArray(K)).Select
View 9 Replies
View Related
Aug 11, 2008
On my main worksheet, I have a list of stocks in the "A column", so for example reading down the list would be:
Vodafone
Vodafone
Ericsson
Nokia etc...
I have a seperate worksheet for each different name (about 100), and I wanted to know if there was a way to select all the information relating to the name "vodafone" for example, and to copy and paste that into the worksheet called vodafone. The problem is copying and pasting 100 times would take ages and wanted to know whether there is an easier way using VBA.
View 3 Replies
View Related
May 9, 2014
I'm having a difficult time returning COUNTIF values for a positive match between 2 columns THAT meet a certain condition. Basically I want to iterate through column A sheet 1 (ONLY for values where column B is paid) and return a count for every instance there is a match of value A sheet 1 in column A sheet 2. In other words, I'm looking to find the number of ids marked as paid from Column A sheet 1 that exist in Column A sheet 2. I don't wish to return the actual ids, just the total count.
I've tried the following but I know there's an error in iterating through Column A the way I have it:
=COUNTIFS(Sheet1!$ColA:$ColA,Sheet2!$ColA:$ColA,Sheet1!$ColB:$ColB,"paid")
Sheet1:
ColA
ColB
123
paid
[Code] .....
Sheet2:
ColA
ColB
23
NY
[Code] .....
View 7 Replies
View Related
Feb 22, 2009
I have created a spreadsheet which creates an average of feedback for trainers in a training company. The form adds up the feedback score into column L of the summary sheet and I have created a summary sheet which I want you use to calculate the average for each trainer.
I have cobbled together an array formula which creates the overallaverage for each trainer based on the named ranges entered via the form.
It looks something like this:
View 10 Replies
View Related
Jun 1, 2008
i'm trying to create a macro to find any value <> "" from COLUMN B then copy Bx;Cx;Dx and paste into another worksheet with the name of COLUMN A.
And when the cells Cx or Dx is empty should appear 0 into the other worksheet
for example.
sheet1 ..... cell("dx") is empty
a b c d
w 5 3
the macro would copy 5,3,0 and paste into sheet named "w".
i found this code on internet but it's not quite good for me because it copies the hole row. i tried everything to change that but i couldn't.
[url]
(ORIGINAL CODE)
Sub SearchForString()
Dim LSearchRow As Integer
Dim LCopyToRow As Integer
View 9 Replies
View Related
Jan 28, 2010
I have a cell (A1) that contains text.
That text will match a single value in a reference list (i.e. range of cells e.g. Z1:Z26).
When the match occurs (e.g. A1 = Z16), I want the format of the reference cell (fill color, text color) to apply to the cell of interest (A1).
The reference cells are manually formatted.
I know that I could create a long list of conditional format formulas instead of using the reference, but it seems that there must be some way to tell excel: if the cell value contents are equivalent, the formatting should be as well.
View 9 Replies
View Related
Nov 19, 2009
programming 2 macros in a bank reconciliation sheet I am trying to create.
Basically the data consists of two sets: the ledger side and bank side. Both sides consists of multiple columns that include date, description and amount.
The following two situations can occur and which need to be covered with a macro.
Many to one matching
When we make payments to say 100 different suppliers at once, the ledger side will show 100 lines with the different amounts. However on the bank side it will only show one line with a total amount for the transaction. As the description on the ledger side is the same for all transactions done at the same time, it should be possible to have a macro add these lines and compare the total with entries on the bank side. Once a matching amount has been found, the macro should place an ‘x’ next to all entries on the ledger and bank side, in order to show that these transactions have been reconciled.
Partial cell matching
In this case we are only dealing with one line on both the ledger and bank side. The issue is that the description does not always perfectly match with one another. The ledger side might say ‘Brown Corp.’ and the bank side might say ‘Brown Corporation’. I want to come up with a macro that can recognize this partial match and still reconcile the lines by placing a ‘x’ to both the ledger and bank entry. The match however should be done with a combination of description, date and amount as several different bookings might be done for the same supplier in the same month.
View 12 Replies
View Related
Mar 24, 2014
I am trying to perform a calculation in a cell that leaves the value 0 if before Feb 2014, changes to the value of another cell in Feb 2014 and leaves the value unchanged if after Feb 2014. I can get to the Feb 2014 value but after that month the value changes to 0.
The Cell formula that I am trying to use is as follows:
=IF(YEAR($A$3)<2014,"0",(IF(YEAR($A$3)>2014,H114,(IF(MONTH($A$3)<>2,H114,AA118)))))
A3 contains TODAY()
H114 is the cell being calculated
AA118 is the cell containing the calculated value for the current month.
View 2 Replies
View Related
Aug 27, 2012
I use Excel 10 and i'm on Window 7.
I need a formula to transfer the values in on cell to another designated cell. "AM" should be in the cell under "AM and "PM" should be under the cell marked "PM". If there's nothing in the space where AM or PM is, that should be blank.
View 3 Replies
View Related
Jan 22, 2008
I have a Textbox on a Userform that allows users to enter text and code copies the text to a nominated cell on a sheet. My difficulty is that when the text is copied to the cell at the end of each line of text there is a small 'open square' symbol that I would prefer not to show. I can manually delete the symbol but would like it either not to appear of be able to automatically delete it. If I copy the text to a word file the symbols do not appear.
Private Sub CommandButton1_Click()
Sheets("Marketing").Range("b4") = UserForm1.TextBox1
Me.Hide
End Sub
View 5 Replies
View Related
Jan 24, 2009
If i have a basic formula that reads a6=(a2*a3*a4)/a5
i need a5 to be entered as one value but be equal to another. Such as 12=6530 and 10=10380 ...
View 10 Replies
View Related
Oct 27, 2008
I have the following code to transfer a formula to another cell:
View 5 Replies
View Related
Jan 9, 2014
Currently have
Code:
ThisWorkbook.Sheets("Sheet1").Range("B8:G8").Copy
Sheets("Sheet2").Range("A" & Rows.Count).End(xlUp).Offset(1).PasteSpecial Paste:=xlPasteValues
B8 contains a date and on sheet2 i have lots of columns, what i was wondering is If I had lots of Tabs Jan Feb Mar etc would it be possible to transfer the Cells B8:G8 to the tab based on B8
i.e. =if(month(Sheet1!B8)=1, copy B8:G8 and paste in 1st available row on the Jan Tab
or =if(month(Sheet1!B8)=2, copy B8:G8 and paste in 1st available row on the Feb Tab
View 9 Replies
View Related
Mar 29, 2014
We created the following spreadsheet at work:
Col A. Col B. Col. C. Col D
Names. Week 1. Week 2. Week 3
Angela. 1.171875
Mara. 1.127214
Linda. 2.552553
Margaret. -1.4157
Lisa 0.12432
Joy 1.109654
Winner. 2.552553
2nd place. 1.171875
3rd place. 1.127214
This is a chart recording the percentage of weight everyone loses each week. We input the weight and it calculates the percentage lost. My question is that I would like the names of the winner, 2nd place and 3rd place to transfer down to the bottom not the number. I was told its not possible.
View 9 Replies
View Related
Mar 22, 2014
I have 2 sheets, A & B. When I type something into sheet A, it goes to Sheet B, but if I change the cell color on Sheet A, I would like that to automatically color the same thing in Sheet B. How can I do this?
View 4 Replies
View Related
Jan 25, 2009
how to take the result of a formula calculated in one cell and show the results in an other cell
View 4 Replies
View Related
Jan 18, 2010
I am trying to get information from 1 sheet to another. What i need to do is take the information from sheet 2 column H2:H26 and put it in sheet 1 cell I4. i already have the vlookup information in the other cells that i need but for what i need this for is different than a vlookup. basically i want to be able to type in a name (from sheet 2) in cell I4 (sheet1) and all the information that i need auto populates for me like i already have. I was able to do this with a drop down menu but that wont work as the information will change weekly,
View 11 Replies
View Related
Dec 2, 2013
I have a spreadsheet with two tabs.
On tab 'sheet1' I input data in cells A1:A5.
On tab 'sheet2' cells G1:G5 are linked to the cells above, so the same data appears.
Now if I go back and highlight cells A1:A5 in yellow on 'sheet1' ..... how do I get G1:G5 to also automatically highlight in yellow?
View 2 Replies
View Related
Jul 15, 2009
I am dealing with large amount of data.
In the first worksheet, there are multiple comments and I need the property of the cell including the comment to be transferred to the second sheet using a formula.
Suppose in "Sheet1" in cell A5 it says "Number of Sales" with a comment "Check everyday".
Know I need to transfer this to say in "Sheet2" in cell A5. So in A5 of Sheet2 I can type
='Sheet1'!A5
This only brings the text and in this example it would say "Number of Sales" without the comment. All i need is for the comment to be joined with the cell.
I do not how to use Visual Basic and need your help
I cannot use Copy Paste in this case because the file is too large.
If there is no comment it should just write the value of the cell and if no value in cell than it should leave it blank. I will attach a file as a example
View 13 Replies
View Related
May 12, 2009
Money savedMoney Earned NameTotalNametotalNameTotalMarkJanieRobCyndiPamDiana
Here's a tricky one. The chart that shows the four columns are on sheet 1. I need a formula or a VLOOK array that will fill in the 2 columns with the 3 rows shown on the left which will be on a sheet 2. Lets say that all start with A1 in both sheets. The tricky part is, i want sheet 1 to be able to populate onto sheet 2 starting with the Name column first row no matter what name i select on sheet 1. Say that Janie earned money, but Mark didn't. I enter Janies info in Money saved & Money Earned. I get her total, and the end result should be her name showing on sheet 2 in the first row under name and her total showing on the first row in the total column. Also, i would need it to bump one up or dowm to the next adjacent column if i were to go beyond the 3 rows in the 1st set on rows in sheet 2. Say Janie, Rob and Cyndi all had info, but now Mark does, i want to be able to push the others down one and over onto the next set of columns.
View 9 Replies
View Related
Aug 26, 2007
I have various textboxes and they are entering values onto my sheet on my command.
If i say, enter 10 into a textbox, meaning 10%, on my spreadsheet it comes out as 1000% I thought about being clever and putting
range("a1") = textbox1.value / 100
but this brings up an error with the debugger!
View 6 Replies
View Related
Sep 24, 2009
Basic run down of spreedsheet. 2 diffrent sheets formated like a calendar. sheet one is to track minutes tardy for employees at work. Work sheet 2 is to document any weather or other issue that might arive to cause and employee to be tardy.
I have condintional formating set up to change the cells a diffrent color (on sheet 1) if the same day is flagged on sheet 2 as a exceptionalable day. What i want -
When i flag a day as a weather issue or other exceptionalable issue on sheet 2 i place a inserted comment with an explantion. I want this comment to auto transfer to the corrisponding cell in sheet 1 when i place it on sheet 2. I'm not sure if this is possible with Excel 03 but thought i'd ask.
View 3 Replies
View Related
May 23, 2014
I have Information found on Sheet 1. I need the program to take the value found in Column B and try to find matches found on Sheet 2 in Column B. Here's the thing it is only going to take the first 3 characters found in the Cell on Sheet 1. But in sheet 2 it will need to pull all information that matches those 3 characters. I included a sheet on what the finished product should look like for two of the sheets. If the program finds a match it will transfer the original and the copied match to a sheet Named "Name". The correct format can be found on "Finished Sheet Name". If no matches are found it will place the original information from Sheet 1 onto a sheet called "New".
Test2.xlsm
View 5 Replies
View Related
