Hyperlink With Relative Destination
May 3, 2008How to create a hyperlink that when copied refers to a new cell?
View 3 Replies
ADVERTISEMENT
VBA - Setting Paste Of Series Destination Range Relative To Active Cell
Oct 24, 2013I'm creating a Macro to paste a series of formulas from a template in hidden rows above to cells further down in the same worksheet. My code works fine if I set an absolute range as the Destination - here's a portion of it:
Sub TimelineRow150()
Dim TimelineMatch As Integer, ProjectPlan As Object
TimelineMatch = ActiveCell.Offset(0, -1).Value
If TimelineMatch = 26 Then
Range("E26:AQ28").Select
[Code]....
I'd like to be able to copy and paste this code to run it multiple times in the same worksheet, (the TimelineMatch variable actually has 26 different options). Is there a way to replace the [Range("E150:AQ152").Select] portion of the code with a range that is relative to the Active Cell? (I'd instruct users that cell E be the Active cell before running the Macro, and E to AQ is still the range I need the copied data to appear.) I've tried using ActiveCell.Offset, but I keep getting an error of Method 'Range of Object' _Global' failed.
Hyperlink - SubAddress Does Not Contain Correct Destination
Oct 24, 2008I have 2 functions that extract SubAddress and SheetName from hyperlink. Unfortunetly, it does not want to work with all links. Sometime I get wrong destination address.
View 2 Replies View RelatedBlink Destination Cell When Clicked On Hyperlink?
Jul 31, 2008I have a sheet where it has got hyperlinks to many cells. When I click on the Hyperlink, the destination cell selected should start blinking.
View 9 Replies View RelatedFlash Destination Cells When Hyperlink Clicked
Mar 27, 2014I need vba code to flash the destination cells when hyperlink is clicked.......
View 3 Replies View RelatedCopy The Destination Data Using Some Sort Of Hyperlink Function?
Nov 10, 2009I'm currently working on a problem that I'm having with Hyperlinks. Basically I want to copy the destination data that the hyperlink points to onto another sheet.
The main problem I'm having here is that I cant seem to find a suitable method to do this....I had the idea of using the hyperlink.follow function and then copying the data once I'm there and then moving back to the source hyperlink. My only problem with that is that I dont know how to find the cell address that the hyperlink is in, once I have found that hyperlink.
Therefore my question is two-fold:
- Is there a way to copy the destination data using some sort of hyperlink function?
- If not, is there a way to find the cell address within a worksheet, once a hyperlink is found on that worksheet?
I've attached the spreadsheet below to give a better idea of what Im doing, along with the "findHyperlinks" macro,within that workbook, that I am currently working on.
Relative Hyperlink References
Jan 24, 2010I suspect there's a simple answer to this but I've looked and can't find it: In Excel 2003, when I add a hyperlink to another file and close/reopen my workbook, the link is saved as relative to the current workbook. So if the main workbook is moved or, in my case, when I use VBA to copy and email the sheet with the hyperlinks, the links are broken.
View 2 Replies View RelatedRelative Cell Reference In Hyperlink Formula
Sep 30, 2013I have a list of University courses listed in Sheet1. Column A contains a unique course code. If there is a problem with a course, a second worksheet (called Anomalies) contains the same unique course code with description of the problem(s).
What I'm trying to do is: in Sheet 1, create a hyperlink to the relative cell in Sheet 2 that shows the course code and description. I've gotten close, but am not sure how I can do this without having to update two formulas. In short, I can't find a way to combine the two formulas.
What I've done is the following: in Sheet 1, column B, created a HYPERLINK formula, thus: =HYPERLINK("#"&CELL("address",INDIRECT(C54)),A54)
Column C contains a formula to lookup the relative position in the Anomalies worksheet, which can be referenced back to the HYPERLINK formula, thus:
=("Anomalies!A"&MATCH(A54,Anomalies!A:A,0))
Sheet1 is fairly static, but Sheet2 (Anomalies) is being updated all the time. I could just hide column C and then column B will update based on that, but I'd prefer a cleaner solution.
I've tried joining the two formulas, by replacing the INDIRECT part with the second formula, as per the following: HYPERLINK("#"&CELL("address","Anomalies!A"&MATCH(A54,Anomalies!A:A,0)),A54)
but I get an error.
AutoFill Destination - General Way To Specify Destination Range
Apr 14, 2013I want to fill all a column bottom-up but without specify cells in format "A1500:A2" like
VB:
Range("H1578").Select
Selection.AutoFill Destination:=Range("H2:H1578")
{H1578 have a formula so...}
I have data in the first 7 columns, with a variable(Range) for the first 5 columns
VB:
Dim oRange As Range
Set oRange = ActiveSheet.Range(ActiveCell.Offset(0, 0), ActiveCell.Offset(89, 4))
{The first cell in it is A1}
My question is : How to fill Range("H2:H1578") using my ''oRange'' variable?
I try with OffSet but my code didn't work. I need to do the same with the 6 columns to the right and then plot in a chart.
Save Hyperlink Path For File With Absolute Path And Non-Relative?
Mar 4, 2013is it possible to configure Excel in order to save the Hyperlink path for a file with absolute path and non relative?
I notice that the hyperlink is ....pdf ry.pdf
if I change the position of the file excel there is a problem!
I would like to save es. d:invoichepdf ry.pdf
Hyperlink In Cell Have Email CODE But Hyperlink Is Not Clickable
Jul 2, 2009I have this code that looks through my worksheet once the conditions are met it will email, and in column "M" I put a hyperlink to where the document is stored. All works as far as the email format, even grabs the hyperlink but it’s not clickable in the email.
Here is the code.
I am outlook 07 and vista 07.
Option Explicit
Const Startingrow = 11 'Data starts on row ##
Const AlarmDelay = 183 'send warning
Sub CheckTimeLeftFac()
'References needed :
'Microsoft Outlook Object Library
Dim i As Long
Dim j As Long
Dim msg As Long
Dim Lastrow As Long
Dim WhoTo As String
Dim SubjectLine As String
Dim MessageBody As String
Dim olMail As Outlook.MailItem
Dim olApp As Outlook.Application
Dim strLink As String
Hyperlink - Insert New Rows Without Losing Hyperlink?
Jan 30, 2014I have hyperlinks betwene one worksheet to another - they only only hyperlinked thourh column & rows (eg: A100) etc. How can I lock these hyperlinks but still allow users to insert new rows without losing their place?
View 2 Replies View RelatedHyperlink Address From Hyperlink Formula/Function
Oct 17, 2006I am having a slight problem copying hyperlinks. I have written some code that sorts data by date and then creates a simple diary. It originally placed the name of the event in the new diary sheet. What I would like to do is instead of copying the name into this new sheet copy a hyperlink that I have created to the company's website for that event.
I can create the hyperlink using hyperlink(B1,A1) where A1 is the company name and B1 is the web address but since the new sheet will not have the underlying data I need to actually copy the values and format of the hyperlink rather than the formula.
Using Destination Property
May 14, 2009I would like to Copy the cell value from A1 into the next available empty cell in a column (in this case sheet2 A) so that I can create a list of values from A1 over time and graph it.
View 6 Replies View RelatedWorksheets Destination
Apr 21, 2007I am attempting to copy the contents of one workbook (Project) to another (NotesName)
Windows(Project).Activate
Sheets("Matrix Calx").Copy Destination:=Workbooks(NotesName).Sheets("Matrix Calx")
I can't get Destination: or Before: to get the desired result and can't find any info on the variables.
What would be the best way to copy from one workbook to another when the data has to be transfered to the correct/corresponding worksheet?
Copy Destination Syntax
Oct 17, 2008I am attempting to create a macro that opens a file named "shrinkage-billing.xls", searches for a variable "PTOSH" in column A, copies the adjacent cell and pastes the data in another worksheet named "Shrinkage Report 2009.xls"
The code follows ...
Autofill To Variable Destination
Aug 30, 2009I have the following code that was achieved using the macro recorder. The only problem I am running into is that during the autofill command, there are never the same amount of rows to autofill. It could be as few as 5 rows and as many as there are rows on the spreadsheet. When I recorded the macro there were 953 lines, and unfortunately I cannot figure out how to change the specific destination of 953 to a variable destination determined by when data ends. Here is the code I currently have:
View 5 Replies View RelatedAutofill Destination By Columns
Dec 20, 2009How exactly do I autofill by columns? In this example I recorded a macro and cleaned it up autofilling through E1 but it could be a number up to 50.
View 2 Replies View RelatedCopy Destination With Formats
Apr 20, 2012Since you can copy to someplace with one line of code like this:
Sheets(1).Range("A1:Z5000").Copy Destination:=Sheets(2).Range("A1")
is there any way of doing this with formatting, or are things like paste special features only possible by selecting something?
Ie: Values, column widths, formats, etc. Does the copy destination argument only allow simple copying?
Copy Destination Of Values Only
May 1, 2012Is there any way to use the formula below and send only the values?
FY07.Copy Destination:=Sheets("Age Roll Up").Range("A1")
I know that I can copy and paste special, but was wondering if I could tweak the above line in any way to?
Changing Cell Destination
Jun 22, 2006How do I change the destination Cell in a workbook from data entered in a macro?
As an example If I press the command button the first time the Textbox1.value is sent to Cells(11, 5).
The next time I press the Same command button the data Textbox1.value is sent to Cells (12, 5)
Mainly is the rows I want to change not the coloums!
Struggled with this for weeks now which I am sure is a simple issue to code.
I am struggling to make people understand the problem though so I hope this works!
Assigning Destination Range
Jul 10, 2006I am trying to do is when a certain criteria is met I want to pull some information from the net using a web query, and then pasting it into a variable location. I have this code -
Sub Check_Matches()
Dim XLoop As Integer, XPlay_Row As Integer, Loop_Length As Integer
Dim Match_Ref As String, Team_Addr As String, Match_ID As String, Import_Addr As String
XLoop = 1
XPlay_Row = 5
Loop_Length = Range("j1").Value + 1
Do While XLoop < Loop_Length
Team_Addr = "S" & XPlay_Row 'A variable that stores the reference to the cell containing the team ID.....................
Choose Destination Folder With Vba
Nov 27, 2007I would like a user of my program to choose the destination folder where a .txt file will be saved. I have code below which allows the chooser to browse through folders and choose a file:
Dim f1 As Variant, s1 As Variant
s1 = "#1: Choose the .txt file which contains montly data for the stock price."
f1 = Application _
. GetOpenFilename("TextFiles(*.txt),*.txt", , s1)
txt2.Text = f1
I want the user to browse folders and subfolders like they can with the above code. However the user will select a file path not a particular file. In the case of the code above, the text of Text Box txt2 would be set to the file path (i.e. "C:Documents and SettingsAdministratorDesktop")
Copy Only Values To Destination
Feb 14, 2008I have the following code to copy a range to another destination. I would like only the value to go to the destination. How to implement this?
Set rngtocopy = Nothing
On Error Resume Next
Set rngtocopy = Range(rngdata(2, 9), rngdata(lngrows - 2, 9)).SpecialCells(xlCellTypeVisible)
On Error Goto 0
If Not rngtocopy Is Nothing Then
rngtocopy.Copy Destination:=Cells(5, 14 + cc + (t - 1) * 3 + (i - 1) * 17)
How To Adapt A Formula Destination To Cell
Jan 9, 2014Im trying to adapt a formula destination to cell.
I have a formula on cell B2 that is directed do other excel file, It appears like [1.xlsx] 1 being the name of the other file.
What I am trying to is make something like:
cell A2 = 1
and ["A2".xlsx]
so whenever I change the A2 cell, the destination also changes.
Including Destination Cell Value In A Formula
Mar 28, 2009There is a big range of cells with normal numbers (ex. 100, 150 .. etc), but I need to convert them in the following formulas that give the same numbers as a result: for example if the cell value is 100, I need to convert it in =if(iserror(100);0;100) and so on with all other values. Is it possible this to be done automatically for all cells?
View 5 Replies View RelatedPaste Data, Keep Destination Formatting
Jul 13, 2009I want to prevent other users when pasting data, to overwrite the formatting of the destination cell.
Since, it is a shared file, i don't want to bother the people explaining use paste special.
I want this to happen automatically.
I don't know VB, and I tried copying what I found in the internet for similar codes, and none have worked. I only copied as they said either in Thisworkbook, and this is all I can do.
I need very easily explained if there is something more than just copying the code in VB view.
Copy Formula With Source Destination
Dec 10, 2009I am sure this is simple but cant get me head around it (tried paste & paste link).. I am wanting to copy formulas in file (A) to file (B) with data source linked in the file (A).
i want is when i copy the formulas to file (B) sheet 2 and it should retain the original path say H:excelfile A[sheet1]$G$1+....xls and source from which the data is being used.
Set Up Data Destination In Blank Worksheet?
Jul 13, 2011For a Datastream request table, I need to set up a Data Destination in a blank worksheet. Instead of rows, I need columns with headers. For the rows I can drag-down the cells, but Excel doesn't seem to get the row drag-down:
For rows:
Sheet1'!$A$1
Sheet1'!$A$2
"select & drag-down"
Sheet1'!$A$3
Sheet1'!$A$4
Sheet1'!$A$5
etc.
But if I want to use columns I get this:
Sheet1'!$A$1
Sheet1'!$B$1
"drag-down"
Sheet1'!$A$2
Sheet1'!$B$2
instead of
Sheet1'!$C$1
Sheet1'!$D$1
Sheet1'!$E$1
etc.
It doesn't get that I want to use columns, not rows again.
How To Change Paste Destination Range
Apr 29, 2014I have a existing code which copies data from one 6 workbooks to Main workbook.
Copying data from workbook 1:
It has Header at 2nd row and Data starts from 3rd row.
From A column to AG
Destination workbook: In this workbook. I have Header at 26th row From A to AG copied Data needs to be pasted at 27th row.
And like wise while continuing to copy datas from other workbook it will get added at last.
My code is working fine. But my requirement here is at Destination area.
Now i have moved Header in Destination workbook. Header is at 26th row
From A To Ag to D to AJ
Data needs to get added at bottom of each paste.
HTML Code:Â
rowofcopysheet = 3
Set copyrng = wkb.Sheets(1).Range(Cells(rowofcopysheet, 1), Cells(Cells(Rows.Count, 1).End(xlUp).Row, Cells(1, Columns.Count).End(xlToRight).Column))
Set Dest = shtDest.Range("A" & shtDest.Cells(Rows.Count, 1).End(xlUp).Row + 1)
copyrng.Copy
Dest.PasteSpecial xlPasteValuesAndNumberFormats