Is there any way to use the formula below and send only the values?
FY07.Copy Destination:=Sheets("Age Roll Up").Range("A1")
I know that I can copy and paste special, but was wondering if I could tweak the above line in any way to?
I have the following code to copy a range to another destination. I would like only the value to go to the destination. How to implement this?
Set rngtocopy = Nothing
On Error Resume Next
Set rngtocopy = Range(rngdata(2, 9), rngdata(lngrows - 2, 9)).SpecialCells(xlCellTypeVisible)
On Error Goto 0
If Not rngtocopy Is Nothing Then
rngtocopy.Copy Destination:=Cells(5, 14 + cc + (t - 1) * 3 + (i - 1) * 17)
I tried searching for code for each part of the task separately and trying to piece together multiple macros, that did something similar, but I’m not have a lot of luck, so I’ll break it down into two treads, I hope this will follow the rule of one question per post, but if I should have separated this request even farther as two treads, please let me know and I’ll be happy to comply.
I was given a spread sheet with a macro that loads data from a SQL Data base (not mine), it returns anywhere from one row to 100’s of rows data. Since it’s not my spread sheet and macro, I copied this sheet to my destination workbook. The Data loads in 7 columns starting in B4:H4, with the column headings titles: Acct#, Id#, Name, Qtr1 Totals, Qtr2 Totals, Qtr3 Totals, and Qtr4 Totals. Data cells in spreadsheet not formatted (general)
What I’m trying to do:
part 1:
I need a macro to copy the data only for columns Id# thru Qtr4 Totals (C5:H5 down thru the last row with data) to another sheet. The destination sheet range starts with rows B13:G13, with formulas below and to the right in columns H13, and J13:N13
(column I is blank).
The formulas below the range are a subtotal of the copied columns (D:G). They could be remove and totaled after they’re copied, so there's nothing below the copied range? Since I need the column totals as a subtotals, my thought was to have the row heading and formulas already on the destinations sheet and just insert a blank rows between as each row was copied?
part 2:
As each row of data is copied from the source sheet, I need the macro to copy the formulas to the right of the copied range (H13, and J13:N13) on the destination sheet down for each new row of data copied from the source sheet
I want to fill all a column bottom-up but without specify cells in format "A1500:A2" like
VB:
Range("H1578").Select
Selection.AutoFill Destination:=Range("H2:H1578")
{H1578 have a formula so...}
I have data in the first 7 columns, with a variable(Range) for the first 5 columns
VB:
Dim oRange As Range
Set oRange = ActiveSheet.Range(ActiveCell.Offset(0, 0), ActiveCell.Offset(89, 4))
{The first cell in it is A1}
My question is : How to fill Range("H2:H1578") using my ''oRange'' variable?
I try with OffSet but my code didn't work. I need to do the same with the 6 columns to the right and then plot in a chart.
I am attempting to create a macro that opens a file named "shrinkage-billing.xls", searches for a variable "PTOSH" in column A, copies the adjacent cell and pastes the data in another worksheet named "Shrinkage Report 2009.xls"
The code follows ...
Since you can copy to someplace with one line of code like this:
Sheets(1).Range("A1:Z5000").Copy Destination:=Sheets(2).Range("A1")
is there any way of doing this with formatting, or are things like paste special features only possible by selecting something?
Ie: Values, column widths, formats, etc. Does the copy destination argument only allow simple copying?
I am sure this is simple but cant get me head around it (tried paste & paste link).. I am wanting to copy formulas in file (A) to file (B) with data source linked in the file (A).
i want is when i copy the formulas to file (B) sheet 2 and it should retain the original path say H:excelfile A[sheet1]$G$1+....xls and source from which the data is being used.
ws5 and ws7 are defined and working due to other parts of the code already using them. ive copied the syntax from some of my other copy destination codes the only difference here is instead of ("A2:J10") ive got "(Cells(2,1):Cells(iRow, 10)" as the row number for this is variable, and it is calculating the correct value for iRow and iRow2. its probably something stupid im missing but i cant figure it.
View 7 Replies View RelatedI have browsed for two days looking for material on effecting this. The technique quoted most is watch for undolist for paste & auto fill then undo the change and paste the value again with specific formatting needs. This technique can be implemented in a worksheet_change event handler. The problem that I am facing is that the user can copy and past while my VBA is running. Once it is caught inside my own application class object event handler all that undo stack is already cleared. Therefore I have nothing that tells me if the user has entered the value via a paste action. By the time the value is pasted, all that formatting would have been entered. For example, a value that is interpreted by another workbook as DATE will have my destination formatting changed to DATE as well even though it is designed to be TEXT at design time.
So far I have not been able to think of a scheme to deal with this.
My basic intention is to always ensure the destination cell formatting remains as TEXT. If something is already interpreted as DATE after the paste even if I can convert to TEXT the string will appear totally differently. I have to find a way to paste the whole thing as TEXT in order to keep the string the same. The problem is that there is no intrinsic PASTE event in VBA. Without a method to undo that paste I cannot catch this at all.
I have a NAMED RANGE of data consisting of 4 columns and as many rows as is selected. Name it CompTable1.
I loop through all of the 4 columns of data to format it (as shown below). This snippet is for column 1 of CompTable1 (a public variable as string) and I basically have the same situation for each column of 4 but replacing each respective x in cells.(n,X) & offset(0,-x) to take into account of where I wish the data to go as I loop through. Ultimately 4 (For Next) loops.
[Code] ......
The new range with 5 columns is as follows:
Column 1 from CompTable1 = Column 1 of new range
Column 2 of new range is blank for something later
Column 2 from CompTable1 = Column 3 of new range
Column 3 from CompTable1 = Column 4 of new range
Column 4 from CompTable1 is not used in the new range but is formatted
Column 5 of new range is blank for something later
This certainly works very well and with my amateur VBA status am quite proud of how far I have come in a few months. Is it efficient? Is it free of possible errors? Likely not. I wish to rid myself of the "Select" each cell plaque though maybe using a resize, offset or copy destination operation but can't seem to get it working. Once I do get the data in the new range, I format everything without selecting quite well with my methods described above.
I'm currently working on a problem that I'm having with Hyperlinks. Basically I want to copy the destination data that the hyperlink points to onto another sheet.
The main problem I'm having here is that I cant seem to find a suitable method to do this....I had the idea of using the hyperlink.follow function and then copying the data once I'm there and then moving back to the source hyperlink. My only problem with that is that I dont know how to find the cell address that the hyperlink is in, once I have found that hyperlink.
Therefore my question is two-fold:
- Is there a way to copy the destination data using some sort of hyperlink function?
- If not, is there a way to find the cell address within a worksheet, once a hyperlink is found on that worksheet?
I've attached the spreadsheet below to give a better idea of what Im doing, along with the "findHyperlinks" macro,within that workbook, that I am currently working on.
I think I am closer but how do I get all of the data from A2 in the origination worksheet and then copy it to the last blank cell in column A in the destination sheet?
Code:
Sub test4()
Dim lastrow As Long
Set StartSheet = ActiveSheet
'MFG PART NUMBER
StartSheet.Range("R2").Copy
Workbooks.Open Filename:="D:\_DoxaMobiusServtrax Import Template"
[Code]...
I have this code that copies existing folders to a new destination path. How do I change the code so that the From path and To path is based on cell value rather than writing it into the code?
Code:
Sub Copy_Folders()Set Fobj = CreateObject("Scripting.FileSystemObject")
Fobj.CopyFolder "C:UsersHengDocuments1243-01234photos", "C:UsersHengDocumentsCasework1243-01234photos"
End Sub
i am writing a custom copy/paste routine which will paste data from a selection if the cell being pasted to is not locked.
The user will select the text for coping and then launch the routine.
The routine will query for destination cell and then process the paste.
This is my routine so far:
Sub testCopy()
Dim c As Range
Dim MyRange As Range
Dim Dest As Range
Set MyRange = Selection
Set Dest = Application.InputBox(prompt:="Select a cell", _
Title:="Paste Destination", Type:=8)
For Each c In MyRange
If Dest.Locked = False Then
Dest.Value = c.Value
End If
'dest = ?
Next c
End Sub
What I need to know is how to increment the dest reference so it is in the same 'relative' position from the initial dest that c (from the selection) is in or is there a better way to do this?
I have a source data sheet that has around 50 columns. I want to copy and past selected columns to a destination sheet.
View 1 Replies View RelatedI have data that is on a separate .txt file (the source file) that resembles this;
A
B
C
D
E
F
1
Case
District
Pct
Division
Level1
Level2
2
305035
0
20
72
[Code] ..........
Using VBA from within the destination workbook, I would like to use an input box that allows the user to request/specify what numerical number (0 through 55) in Column B of the txt file (the source file) will be used to determine what data to copy to the destination file. The cells to copy to the destination file would be from Column A through Column G of the source file onto Sheet1, E2 of the destination file.
Column B of the Source file will only contain numbers. However there will be numerous identical numbers in Column B. All of which will need to be copied onto the destination workbook.
From the sample above, if the user were to enter '15' in the input box, the desired result on the destination sheet beginning at E2 would look like this;
E
F
G
H
I
J
1
Case
District
Pct
Division
Level1
Level2
2
502046
15
1
3
[Code] ............
Trying to copy a range from Sender.xls (sheet) Lists backstage
onto Userform.xls (sheet) Behind the Scenes
When trying to copy the values within a multicell range, the destination cell range (same size) becomes blank.
My goal would be to click on a cell within a range of cells (in a column) and have the value copied to a specified destination cell. There would be a few different columns with source cells and two destination cells. Each column would to copy to a specific cell. My ojective is basically to deal with different processing times (days, weeks, months).
Here's a little visual, clicking on C4 for example would copy the value "5" to cell B2. Clicking on D4 would copy "12" to A2.
row/col
A
B
C
D
E
1
Days
Weeks
Processing time X (weeks)
Processing time Y (in days)
Processing time Z (in weeks)
2
3
10
110
3
4
11
111
4
5
12
112
5
6
13
113
Sheet linked from external file, new data coming daily. How to copy Values of cells from B4 till B-empty to C column? The attached file has a properly displayed data.
View 3 Replies View RelatedI would like to Copy the cell value from A1 into the next available empty cell in a column (in this case sheet2 A) so that I can create a list of values from A1 over time and graph it.
View 6 Replies View RelatedI am attempting to copy the contents of one workbook (Project) to another (NotesName)
Windows(Project).Activate
Sheets("Matrix Calx").Copy Destination:=Workbooks(NotesName).Sheets("Matrix Calx")
I can't get Destination: or Before: to get the desired result and can't find any info on the variables.
What would be the best way to copy from one workbook to another when the data has to be transfered to the correct/corresponding worksheet?
I have the following code that was achieved using the macro recorder. The only problem I am running into is that during the autofill command, there are never the same amount of rows to autofill. It could be as few as 5 rows and as many as there are rows on the spreadsheet. When I recorded the macro there were 953 lines, and unfortunately I cannot figure out how to change the specific destination of 953 to a variable destination determined by when data ends. Here is the code I currently have:
View 5 Replies View RelatedHow exactly do I autofill by columns? In this example I recorded a macro and cleaned it up autofilling through E1 but it could be a number up to 50.
View 2 Replies View RelatedHow do I change the destination Cell in a workbook from data entered in a macro?
As an example If I press the command button the first time the Textbox1.value is sent to Cells(11, 5).
The next time I press the Same command button the data Textbox1.value is sent to Cells (12, 5)
Mainly is the rows I want to change not the coloums!
Struggled with this for weeks now which I am sure is a simple issue to code.
I am struggling to make people understand the problem though so I hope this works!
I am trying to do is when a certain criteria is met I want to pull some information from the net using a web query, and then pasting it into a variable location. I have this code -
Sub Check_Matches()
Dim XLoop As Integer, XPlay_Row As Integer, Loop_Length As Integer
Dim Match_Ref As String, Team_Addr As String, Match_ID As String, Import_Addr As String
XLoop = 1
XPlay_Row = 5
Loop_Length = Range("j1").Value + 1
Do While XLoop < Loop_Length
Team_Addr = "S" & XPlay_Row 'A variable that stores the reference to the cell containing the team ID.....................
I would like a user of my program to choose the destination folder where a .txt file will be saved. I have code below which allows the chooser to browse through folders and choose a file:
Dim f1 As Variant, s1 As Variant
s1 = "#1: Choose the .txt file which contains montly data for the stock price."
f1 = Application _
. GetOpenFilename("TextFiles(*.txt),*.txt", , s1)
txt2.Text = f1
I want the user to browse folders and subfolders like they can with the above code. However the user will select a file path not a particular file. In the case of the code above, the text of Text Box txt2 would be set to the file path (i.e. "C:Documents and SettingsAdministratorDesktop")
How to create a hyperlink that when copied refers to a new cell?
View 3 Replies View RelatedIm trying to adapt a formula destination to cell.
I have a formula on cell B2 that is directed do other excel file, It appears like [1.xlsx] 1 being the name of the other file.
What I am trying to is make something like:
cell A2 = 1
and ["A2".xlsx]
so whenever I change the A2 cell, the destination also changes.
There is a big range of cells with normal numbers (ex. 100, 150 .. etc), but I need to convert them in the following formulas that give the same numbers as a result: for example if the cell value is 100, I need to convert it in =if(iserror(100);0;100) and so on with all other values. Is it possible this to be done automatically for all cells?
View 5 Replies View RelatedI want to prevent other users when pasting data, to overwrite the formatting of the destination cell.
Since, it is a shared file, i don't want to bother the people explaining use paste special.
I want this to happen automatically.
I don't know VB, and I tried copying what I found in the internet for similar codes, and none have worked. I only copied as they said either in Thisworkbook, and this is all I can do.
I need very easily explained if there is something more than just copying the code in VB view.