I am still having bother with if statemnts (within a cell in excel - not a macro)
Sicarii kindly assisted me the other day with this...
=IF(A1="&","V",IF(A1=" &"," V"))
*note* there is nothing set in this for FALSE.
How do I get the statement to return nothing (i.e.: have "" in the return) instead of 'false'? To explain further, I have in a column, the following:
&
^ & (i.e.:'(space)&')
&
33
&
^ &.........................
Where in this function would I put " " to return a blank field if false is returned?
=IF(D18>=1,(VLOOKUP(C18,C7:E13,2,FALSE))-(VLOOKUP(C18,C7:E13,3,FALSE))+(VLOOKUP(C18,C7:E13,3,FALSE))*D18)
I am using concatenate to create a list of bottles based on other data, so that each cell contains a different combination of bottles.
The problem is that the list appears but there is also FALSE for every bottle that doesn't relate to that cell.
Is there a way to create a formula such that nothing appears if it is not true?
And is there a shorter way of writing what I am after, I can't quite finish the formula becaise it is so long.
This is what I am using: .....
I have three formula in a spreadsheet, all of which should return a number (which they do) or show blank. However, two of the formula return 'FALSE'. The formula are as follows:
1 Which returns a number or 'FALSE'
=IF(A15="2",(""),IF('Doorset schedule'!N20="l",(""),IF('Doorset schedule'!AY20="l",(""),
IF('Doorset schedule'!AZ20="l",(""),IF('Doorset schedule'!BA20="l",(""),IF('Doorset schedule'!BB20="l",(""),
IF('Doorset schedule'!BC20="l",(""),IF('Doorset schedule'!CN20="l",(""),IF('Doorset schedule'!S20="l",(3),
IF('Doorset schedule'!T20="l",(6),IF('Doorset schedule'!U20="l",(6),IF('Doorset schedule'!W20="l",(4)))))))))))))
2 Which returns a number or remains blank (ie works OK)
=IF(A15="2",(""),IF('Doorset schedule'!N20="l",(""),IF('Doorset schedule'!AW20="l",(""),IF('Doorset schedule'!AX20="l",(""),
IF('Doorset schedule'!CN20="l",(""),IF(AND('Doorset schedule'!AY20="",
'Doorset schedule'!AZ20="",'Doorset schedule'!BA20="",'Doorset schedule'!BB20="",
'Doorset schedule'!BC20=""),(""),IF(AND('Doorset schedule'!S20="l",'Doorset schedule'!
[Code] ......
3 Which returns a number or 'FALSE'
=IF('Doorset schedule'!$CW20="N",(" "),IF('Doorset schedule'!$CX20="1",("1"),
IF('Doorset schedule'!$CY20="2",("2"),IF('Doorset schedule'!$CZ20="4",("4")))))
=IF($T$50=Controls!$B$2),"GO",IF(AND($E$52=3,Controls!$B$3=1.3,$U$1=8,$AB$1>=Controls!$B$2),"GO","")))
Why do I get a FALSE statement with this formula when T50=1, i want it to be blank.
I have the following formula,
=IF(AH10="","",IF(VLOOKUP(AH10,Sheet3!C:D,2,FALSE)="","",VLOOKUP(AH10,Sheet3!C:D,2,FALSE)))
that I would like to return a blank cell not N/A if the value that is in "AH10" is not found.
I have the following formula:
=IF(ISBLANK(H16),"",IF(H16="Car","Ca",IF(H16="Boat","Bo")))
Where I would like it to return a Blank cell if H16 is blank. However it always puts False in the cell because there is a Vlookup that is hidden H16. Is there a way I can make it return as a blank cell instead of false.
I've written a sumproduct formula, which does what I want it to do; but it returns a zero in false condition, instead of a blank. I've tried several things, but don't seem to be progressing very far. Here's the formula that I ended up with.
View 9 Replies View RelatedHow wud I find out the total number of rows in a column, that are non blank? Value "False" and N/A are considered as blank cell , but a cell with --> one or more space " " is allowed.
View 5 Replies View RelatedI am trying to return a TRUE or FALSE based on a date in a cell.
for example:
if cell A1 = 07/11/2009
I want A2 to show TRUE or FALSE if A1 is 14 days or more behind todays date.
I have tried stuff like:
=IF(A1=TODAY()-14,"True","False")
but it just always says false. EDIT: I have just noticed that if I change the date in A1 to exactly 14 days behind todays, it returns TRUE. So, it does work. Do I need to add a GREATER THAN in there?
I am trying to use the IF function to return a false value if the combined sum of a row is not the same as either of the 1st 2 cells. If that makes any sense!
This is the formula I would like to use. =IF(SUM(g3:g9)=g1 or g2 then y if true and x if false. I thought it would be easy but I can't figure out how to do it
created my 'IF' function with the 'True/False' statements, but i am wanting to have yes/no instead and i cant figure out how to do it.
View 9 Replies View RelatedI have calculated the t values then i have three tables for 3 confidence levels, 0.01, 0.05,0.1 in which I compare the t value with the value from the
t-test table. If the t value is larger it returns a 1, if not a 0. This works fine.
To summarise the information I have a final table which I wish to return the highest significance of the given t value.
I am using this
=IF((G53=1),0.01,(IF(G44=1,0.05,(IF(G35=10,0.05,"none")))))
the problem I have is it always returns 0.01 even if g53=0. If i remove the formula from g53 and replace it with a 0, it returns 0.05 instead (even if g44 is retruning a 0).
I have considered copy paste values and doing this but that rather removes the automation aspect of the spreadsheet if I need to make adjustments.
This is probably quite a simple request but here goes:-
=SUM(h2,e2-f2)
I would like excel to perform this calculation but only if another cell contains a date. I couldn't figure out how to do that so I added another column next to that cell and added =ISNUMBER(A8) to return a true or false statement. I was then going to hide this column but still refer to it.
transaction cleared amount amount balance
date date in out
A B C D E F H
1 $500.00 BALANCE BROUGHT FORWARD
2 1/1/10 TRUE 1/2/10 TRUE $5.00 =SUM(h2,e2-f2)
3 1/2/10 TRUE FALSE $300.00 =SUM(h3,e3-f3)
4
5
6
7
I don't know if this makes sense of if anyone can suggest another way of working this out. New to excel so sorry if this is basic stuff.
I have two columns A & B. If I enter "Short" into Col A, I want "Long" to automatically appear in Col B, and vice versa. This is the code I have created so far. =IF(C4="Short","Long",IF(C4="Long","Short",IF(C4="",""))). This works but when I paste the formula into all cells in Col B, I get "FALSE" showing up in every cell. How can I stop the "FALSE" from populating every cell in Col B while Col A remains blank?
View 4 Replies View RelatedI've been asked to adjust some thing with a worksheet someone else created. On the sheet labeled "Criteria" there is a list of dates and some formulas that use these dates. I can't figure out why the result of the formula is a number, i.e "0"; I thought it is supposed to return "TRUE" or "FALSE". If I insert a new sheet, within the same workbook, and insert the same formula, I get "TRUE" or "FALSE". For some reason, the "Criteria" worksheet doesn't return "TRUE" or "FALSE", it returns numbers. I just need to know why this is happening so I can replicate it in the new workbook I'm creating.
View 2 Replies View RelatedI'm trying to determine if a rangeName is defined so that I can delete it without a programming error. I've used the idea that if I try to goto a non-existant rangeName, I'll get an error. I've tried to design a function that will return true or false if the rangeName is defined on the basis of that idea. Can you take a look at the code and see where I went wrong?
View 4 Replies View RelatedHere's my formula:
=AND([@[Tenure (Yrs)]]>=5,[@[2016 Sales]]>=150000)
(Where should I enter high and low? Do I need an if formula nested into it?)
I'm trying to get it to read if the customer reads both criteria which is they've been there 5 years and over 150000 sales =
High if not Low.
I'm trying to create a IF function to stop at $1500 for 401k employer match. To make it simple the variable in column D is constant but in reality it's based on 50% match amt up to $1500 of amount contribute(% of gross pay). The accumulation of matching is a rolling balance. If the match amt is less 1500, then match amt. But False, the left over amt equal 1500 then STOP there onward.
IF(SUM($D$3:D19)+($C20*0.5)<1500,$C20*0.5,SUM($D$3:D19)+($C20*0.5)-1500)
I need to check one column to see if it is less than another one
If it is I need to have the IF function return specific criteria for true and then for false but then I also need it to rely on the results of another question from another column if the result of the first query is less than the figure in another column again I need to return specific criteria for tur and then for false
An AND function requires both to be true but when one isnt what do I write?
I have one column that contains an If statement formula and would like the next column to then work off of the first column (i.e. if that 1st column returns a value then then adjacent column uses that result).
What is happening now is that it is returning #value (because I guess technically the cell isn't blank?)
I have a table arranged by columns into SETS of results. I am looking for a way to mark all the columns of a set as false if any one column of the set is false.
View 4 Replies View Related=IF(C22="BLUM MOTION",(VLOOKUP(G22,Info!B14:C22,2,FALSE)),IF(C22="ACCURIDE",(VLOOKUP(G22,Info!E13:F31,2,FALSE))))
Can anyone take alook @ the formula above and help me out w. getting the false out of the cell and have a blank cell if there is nothing inputed
I am trying to Sum lines of info with "True or False" and "Yes and No". I would like to assign 1 to True and Yes and 0 to False and No when I total the rows. Never tried this in Excel, on Lotus and the formula does not work. I can find and replace, but I would like to be able to use a formula.
View 2 Replies View RelatedI have roughly 150 cells I am trying to count, some blank, some not blank, some with numbers. All are in the same column. I want use a simple function that sums the total number for me, say from (A2:A153). Answers?
View 9 Replies View RelatedI'd like to do an if statement that only brings in data from a cell if another cell is not blank...
=if(A1="not blank",A3,"")
I need the "not blank". Sometimes the cell is text, sometimes it is a number.
I have excel worksheet like this
HTML Code:
a b c d
1 bob math fail
2 bob biology success
3 bob (blank)
4 jane math success
5 jane biology success
6 jane (blank)
7 jake math success
8 jake biology fail
9 jake (blank)
I want to fill cell D3, D6, D9 automatically by a formula with condition if one lesson is fail then it's fail, but if both lesson is success then it's success
Example on cell D3 (blank cell on row for student name "Bob") should be fail (his math is fail), same with cell D9 (blank cell on row for student name "jake", due to his biology is fail), but on cell D6 (blank cell on row for student name "jane") should be success.
If have very simple =IF function, =IF(F4=H4;1;0) but don't wan't the 'value is true' value when both cells are empty, how do I need to change the function so it states 0?
View 3 Replies View Relatedfirst post, i'll try to make this short and to the point. i have a file that has single invoice numbers, invoice dates and invoice totals. the line does not have a vendor name. the vendor name is above the invoice lines. (see spreadsheet).
Example:
D2 = Vendor
Lines 3-10 are individual invoices
Basically, I need to setup a formula that says if a cell in Column D is blank, then select the closest cell above the blank cell. I have 65000 lines with thousands of vendors. In the end, each invoice line will now have the vendor name that it is associated with.
My Macro opens an excel file and I've to count the number of blank spaces for every filled column. I'm using CountBlank function for that.
But, the code fails at the countBlank line by saying Type Mismatch.
Code:
Sub Snippet_Code()
Dim apdata as excel.application, wbdata as workbook
set apdata = new excel.application
Set wbData = apData.Workbooks.Open(Filename:="ABCD.xlsx")
For colnum = 1 to 50 'Columns from 1 to 50
[Code] .......
My code fails at the BlnkCnt part. I also tried assigning the two cell addresses in two variables and passing the variables to the range method. But there again, I get the error of Method Range of class _Global Failed.
What might be the error?