I am attaching my spread sheet.
I need to create a function for cell E9 that will look at cell D4(gender) AND cell C5 (age in days) and choose the correct value J3:M3 (boys) or O3:R3 (girls) to subtract form cell C9.
I tried =IF(D4=2(AND(C5<E3,sum(C9,-5),FALSE)) but did not get anywhere.
CI formula.xlsx
I need cell (O4) to display days overdue or days remaining on an assigned task based on subtracting due date (M4) from todays date, but only perform days subtraction function if (M4) is not blank and only if task complete cell (N4) is less than 100.
Have the conditional blank cell figured out, but nesting another condition for the less than 100 complete cell. So in other words, I don't want cell (O4) to subtract days and display any error, irrelevant data if there is not any due date entered or the task is entered as complete...
I needa formular that will subtract a number per day, for example as one day passes you can set the amount of number to be taken away from the total.
View 12 Replies View RelatedI am looking for a formula which substract a number of workdays defined in a cell from a date defined i nanother cell. For example I have a date in cell B2: 10.08.2014 - this is the due date for service delivery. In cell C2 there is a number of workdays: 84 - this is the duration for the delivery process. I would like to have a formula calculating in cell D2 the date when the delivery process has to start. The tricky point is that B2 is basicly a range of merged cells B2:B6. As an example I am attaching an exmple sheet.
View 10 Replies View RelatedI am creating a spreadsheet for inventory use. I want to have a running total in (1) cell based upon a new/different number being entered into a different cell.
Column B, Row 1 (This will be a new/different number entered every day - inventory in or out, so positive or negative number)
Column D, Row 1 (This will be a running total based on numbers inserted in previous 2 columns)
Basically what I have is a key inventory. So there is column A with key number, B should be keys IN, C should be keys OUT, or ideally B would be IN and OUT meaning, for inventory IN input a positive number and for inventory OUT input a negative number, and D Should be total.
Column E represents number of keys currently in the inventory. I was going to hide the current inventory column so all you see is IN/OUT and total. So what I need is to be able to just come in and type in a number in the IN and/or OUT column, without having to add/subtract it with the number already in that column.
Bottom line, I'd like to be able to use IN and/or OUT columns to just type in numbers as they come and not have to worry about what's already in those columns and get correct total number.
Ok here it is. Attached worksheet shows
Column A - Key Numbers...No data value
Column B - Inventory IN
Column C - Inventory OUT
Column D - Total
Column E - Current Inventory(Starting point)
So the formula I used to get what i currently have is (=B2-C2+E2). This way whatever i input in columns C and C. totals out in D. But this way every time I want to add/subtract a number in B and C, i have to add to the number already in the column. I'd like to be able to type in a number in B and C as i go and still have a correct total. I wouldn't mind having just one column for in/out and use positive and negative numbers to differentiate inventory in or out.
I have name and a number in this
format: cell a1 Jones---56. In cell b1 I have another name i.e.,
Johnson---45. How can I subtract 45 from 56, take 60% of the difference
and in cell c3 show the following; Johnson---6. All numbers are to
rounded down to 0. The final result would look like this;
a1 Jones----56, b1 Johnson----45, c1 Johnson----6. I have other cells
with the same type of info in them. Example; a2 Smith----34, b2
Jones----78, c3 would show Smith----26.(rounded down) I always want to
subtract the lower number from the highest and take 60% of the
difference.
I created a drop down box with 3 options. Yes, No, and N/A. I want to subtract from a fixed number (8) a certain amount based on the answer. Something like if yes then subtract 1 from 8 and have the final number (7) appear in another cell.
screenshot attached.
[URL]
I have a column which contains following values:
Code:
646-900
634-645
611-633
589-610
and so on
I want to first reverse the range in each row and then subtract the values from 2000 so that it now becomes
Code:
1100-1354
1355-1366
1367-1389
1390-1411
How can I write the formula?
I have data on A1 to A100. How can I subtract a same number (for example 10)from each cell of A1:A100?
View 3 Replies View Relatedin Cell J32 I want it so when i type in a number it would subtract the number from Cell C32. Is there a formula in which all you have to do is type the number without editing the formula?
View 3 Replies View RelatedWe use excel to organize salaries and contracts for my fantasy baseball league. I need an easy way to go through all the teams and subtract one year from each players contract. This is an example of a team.
The contracts are in the columns like this NG-3
I would like to change that to NG-2
I am trying to subtract the highest number from a row of numbers then find the average for the remaining numbers in Excel 2003, as: =SUM(B2:E2)-MAX(B2:E2)AVERAGE(B2:E2).
View 5 Replies View RelatedI have an excel with column value as below(sample)
3
4
6
7
empty cell
4
5
3
1
7
empty cell
4
5
empty cell
and more...
Actually i want it to reduce others with lowest number among them.. and after every empty cell, it should find the lowest number again and reduce it from others.. this should repeat until the column data completes. after processing it should find as below
0
1
3
4
empty cell
3
4
2
0
6
empty cell
0
1
empty cell
Any macro or excel formula for processing such a kind of excel. Empty cell works like a delimiter..
Need to find out exact date. if I insert 32.5 (32 years 5 months ) in particular cell. my output shld be 10 june 1974 or 10/06/1974. I want to find back date...
View 4 Replies View RelatedI have a database of over 200,000 parts
In this database i have cost and sale price. 20,000 parts have the numbers backwards.
if you loop the rows you can subtract =SUM(AE2-Y2) if that number is a negative number I would need the value of AE copied to Y2 and the value of Y2 copied to AE2. the 2 being the row number which would always change with the loop.
I have a cells with a date and time in each cell. I want to subtract the number of days between the cells only. Is there a way to do that with the time in the cell? If not, how do I remove the time in each cell?
View 5 Replies View RelatedI am trying to find a formula that will return the number of week days between two dates. My specific situation is that my job sets up work orders (WO) to be completed by our staff. We have 3 dates - the date the WO was created, the date the WO is due to be completed, and the date the WO was actually completed.
I would like to subtract the Complete date from the Due date. Generally, this should always equal zero because our staff should be completing WOs on the due date! But obviously that doesn't always happen. There are times that they complete them late, and times they complete them early (yay!).
The problem with NETWORKDAYS is that even when they are completed on time, the result is 1. This formula counts instead of subtracts. I adjusted the formula to =NETWORKDAYS(A3,A4)-1 which works fine for those WOs completed on time or completed late. But for those completed early, it adds (or subtracts, really) 2 days. So for a WO completed a day early, instead of it showing -1, it shows -3. I've attached an example of WOs and the NETWORKDAYS formula I've used so you can see.
Subtract Days.xls
I'm really looking for something that will subtract week days, not count them.
I have a huge workbook with lots of sheets. I'm an Instructor and I use the workbook for all my students records. The first sheet has all the students names. The second sheet has a statment that only females have to sign. On the first sheet column A is "First Name", column B is "Middle Initial", column C is "Last Name" and column D is "gender".
I would like to be able to have all the Female names automatically inserted on the second sheet into the "name" cell. The concatenate formula will probably be necessary as the names will have to be put together (Last name, MI First Name). I have a maximum of 12 students so I have created 12 individual statments so that if there are 12 females their names will be inserted into each name cell for each statement. I can send or post the entire workbook if necessary.
I am working on a spreadsheet that needs to access data from two different spreadsheets. I train an army in Africa and this will be used for their physical fitness test. I have set it up where the user inputs the soldiers name, birthday, gender, push up raw score, sit up raw score, and run time raw score.
When I first wrote the program all I had were male soldiers, now I have female soldiers as well. My problem is I cannot figure out how to tell it to go to either the male or female data page. The code I had used for accessing the male page earlier was: =IF(OR(E3="",E3<17,F3=""),"",VLOOKUP(F3,'Male Points'!A4:K77,IF(E3>61,11, ROUNDUP((E3-16)/5+1,0)),TRUE))
Now I need the program to figure out which data sheet (Male Points or Female Points) to use. And will I have to adjust my code above as well?
I'm trying to write a function that takes a date in format YYYYMM and adds/subtracts a number of months.
for example: newDate(YYYYMM,numMonths)
newDate(201109,5) would give 201202
newDate(201102,-4) would give 201010
I was thinking i could use the left/right function to retrieve the month and year ........
How do I get a drop down (gender list) to affect the data in another cell? ie when male is selected this automatically affects another cell - data 13.5 and when female is selected as gender the cell data is 12.5.
View 3 Replies View RelatedI have a list of employees split out into gender and performance rating. I want to graph this to compare male to female salaries and performance. Data attached.
View 3 Replies View RelatedI need some code that will find the column with the header of "Gender" and change the values from "M" and "F" to "Male" and "Female" but I keep running into issues.
I want to use a Select Case statement so I can set all other found values as blanks.
I have a series of data and want to create a chart looking like this
Google Image Result for [URL] ...
Where it shows min/max on the error bars, quartile 1/3 on the box and median as a scatter plot. My data is a simple table
Group
Amount F
Amount M
Median F
Median M
Median F+M
[Code] ....
Here F = Female, M=Male and the chart should show all calculation for both gender together (I have another thread up where the gender are separated with the Title (How to create a stock column chart with error bars?? (Both gender separated))
I have a user form with textBox1 = start time (entered as "[h]:mm") and text Box2 = finish time (entered as "[h]:mm"). I would like textBox3 to display the difference between the start time and finish time as a general number!
For example
Start time: 21:00
Finish time: 06:30
Hours worked: 9.50
Start time: 12:30
Finish time: 23:00
Hours worked: 10.50
I am trying to subtract an amount from a cell until it reaches 0, then move and subtract from the next amount, and so on.
AmountFixed BudgetedResult53.50Subtracted 5 tell it hit zero1.30Subtracted remaining amount until zero43.8Subtracted remaining amount until zero3.8 was left over without hitting zero is good. Is there formula for this?
About sequence number with 4 condition...
code number (as text)
desired result
date
condition
cost ($)
'1003
1
31/12/2000
1
5
[Code] ..........
if "code number", "date","condition" and "cost" the same line of rows so "desired result" = 1 like code "1003" or so code "1005" = 5, otherwise if there is a no match/same condition "desired result" start from = 2,3,4,etc.......
I am trying to round a number to next multiple of 10 with condition i.e. for example if number is 1230.56 then it should round off to 1230 but if the unit number is more than zero i.e. 1231.56 then it should round off to 1240.
That means the main number should round off to next multiple of 10 only if unit number is equal to or more than 1.
Example 120.11 should round off to 120
121 to 130
120.99 to 120
119 to 120 and so on
I am trying to work out a custom number format to display betting fractions properly - namely 3/2 as 6/4 and 2/3 as 4/6. The following works for 3/2:
[=1.5]"6/4 " ;??/??
However I can't get anything to work for 2/3 as it is a recurring decimal.
I have a spreadsheet that has 35000 entries and i am trying to count how many material are assigned to a particular group but cannot get it to work. I have included a test spreadsheet to explain what i am trying to achieve
View 3 Replies View Related