IF Formula To Recognize Partial TEXT But Out Number
Oct 24, 2008
I'm trying to figure out a formula to be able to look at a column of txt and if it finds the word total it need to output the number at the column next to it. If the word total isnt in the text then it should leave it blanks (see below). Basically I want a column that pulls only the totals amounts in the column.
Aaron Drielick 3
Aaron Drielick 2.5
Aaron Drielick 37.5
Aaron Drielick Total 151.0
Akila Subagaru 31
Akila Subagaru 1.5
Akila Subagaru 1
Akila Subagaru 1.5
Akila Subagaru Total35.0
Albert Major 4
Albert Major 6.5
Albert Major 2
Albert Major 19.5
I am continually getting data withthe format YYYY-MM however I cant get excel to recognize this as a date. i simply need a formula that converts the format to anything that excel will recognize as a date so that I can apply some other formulas to it.
This is for Excel 2007,I have two sets of model numbers. One set is the full model numbers of the units we use, and the other is an abbreviated form used to lookup up certificate numbers. I need a way to match these up so I can use one set of search criteria to find out if there is a match. Here is an example of what I need to match with a partial text match:
H,AE35(6,9)36+TD and AE3563636D145C2501AP H,RE36(6,9)36 and RE36936C145B2505AP
if I could do this with a formula that matches multiple items at the same time (ie; if A & B & C match=true) with the above model number being one of those items (certificate numbers are issued for sets, but the other model numbers are fine).If that's not possible, a one time VBA run to match all of the abbreviations at once would also work. If these items are matched up with a one time VBA, the VBA needs to account for their being more than one match for each abbreviation depending on the size of the unit.
So H,AE35(6,9)36+TD could be matched to: AE3563636D145C2501AP AE3563636D175C2501AP AE3563636D210C2501AP
I'm working on a formula to make it enable a part of the text then return the best possible match. Below is my formula
=MATCH("*"&$A11&"*",'[Customer Master List - 05.30.xlsx]Export Worksheet'!$B$82:$B$1298,0)
However, it works with some text but won't work for some.
For example, I have this text CARE-A-LOT, INC and in the master sheet there is a similar text like this CARE-A-LOT. I want it to return CARE-A-LOT as this the best match possible.
In the given example below how can i recognize the last number which is LV-00010 and after recognizing the last number i wanted to add 1 so the next number will be LV-00011 (im using this as an automatic ref. no.).
I have the following column: A1 B1 B3 Ab123 1278 what i would like is if cell A2 start with AB then B1 and if not then nothing AC125 1587 AF123 1365 AR125 1259
I would like another cell to check the cell where i have the two letters and the numbers. if the cell start with the number that i am intrested then to confirm it to me, or to give me a value from another cell.
In column B, I want it to show me the first 3 numbers from the left, (so 123)
So I do =LEFT(A2,3)
Which gives me 123, but it's displayed as text, which ruins my whole formula that looks up the area code and displays the state.
I googled the problem and found http://exceltip.com/st/Make_LEFT_Fun...umber/778.html
which tells me to do: =IF(LEFT(A1,1)=1,"Ignore",A1) [sees 1 as a number] =IF(LEFT(A1,1)+0=1,"Ignore",A1) [sees 1 as a number] =IF(LEFT(A1,1)="1","Ignore",A1) [sees 1 as text]
but when i try that it just displays the ENTIRE phone number: 123-456-1234
Over the weekend I had to look at 220 strings of numbers, some strings with as much as 20 numbers and determine if the numbers represented red, green, blue, or yellow and how many of each color from a parent list.
I did it all by hand. After getting help here from JBeaucaire on my tally sheet, which I successfully recreated with their guidance, I thought I might ask this question. How would one go about creating a macro that would when it seen a certain number, it would put the color in the column immediately to the left, and the number of colors in the column immediately to the left.
I created a lookup helper sheet to do some data cleanup and serve as a key for future use.
The problem I'm having is that things that I am doing a vlookup on won't find the corresponding value in the key table.
So in the original sheet I had "blueberry" in the helper/key sheet I have "blueberry" as well. But I still get the "#N/A" error.
The key values in the helper sheet were all derived from the original by using a pivot then copying those values so there were only unique values over to the helper sheet.
I had them both formatted as general and tried formatting to text as well.
I'm trying to make a table of the total amount of a liquid used throughout the day. Here is what I am trying to do: In cell D4, I want to be able to enter something similar to the following: 3cup+2bottle+1liter
and by doing so, Excel can automatically recognize that 1cup is 8oz, 1bottle is 17oz, and 1liter is 34 oz because of the reference chart provided on the side. Also, it would be able to notice the 3, 2, and 1 amounts so it would multiply accordingly so it would know to do this: (3*8)+(2*17)+(1*34)
and then put the calculated amount in the cell. The correct answer should be 92oz. Is there a way for Excel to recognize the conversions (i.e. whenever it sees 'cup' it will multiply by 8) and multiplication factors (i.e. 3, 2, 1)?Is there a formula I can enter that I can just "drag" down to the upcoming days in column D?
I know I can just do something like this: (3*G4)+(2*G5)+(1*G6).
I want VBA to take an equation that has been entered into an worksheet cell as text and evaluate it. Here's a very simplified example that shows the concept:
Cell A1 may contain the text: "A * B + C"
I would like to do something on the order of this in VBA:
Sub Test() Dim A As Integer, B As Integer, C As Integer
Obviously, this doesn't work, but I want it to show a result of 14. The actual situation is much more complex, but it all comes down to being able to evaluate the text in a worksheet and recognize the variable names that are in it.
The issue is that the information (time) that I import into excel doesn't show as information if there is a zero in front the amount of hours. I can physically see the information but have trouble using it. For instance if I add
(A1) 05:25:25 (A2) 10:25:25 (A3) 02:25:25
If I total/SUM this my total is 10:25:25. It will not recognize anything under 10 with a first digit as a zero. So for me to add this I use:
=SUMPRODUCT(B3:B25+0)
This also works great. Now on to my issue.
I am using the 1st formula to grab data i.e. (A1). It will not recognize that as anything. It comes up as zero. I can't figure out what to add to the 1st formula for it to recognize the info.
I am working on the monthly duty roster that is attached. I have the cells at the bottom configured to total how many early shifts, late shifts and off days each Trooper has. My problem is that I often need to add text to show what type of leave is being taken, or numbers to correspond to the special notes section numbered 1-24, and so on.
Is there any way to use conditional formatting to do this so that the totals at the bottom still sum correctly? Badge numbers are used to identify each Trooper. I have included them at the top for reference. The reason that I referenced them to total by cell instead of individual badge numbers is that I am attempting to format this so that any badge numbers can be entered at the top. This form will be used by other groups of Troopers if I can get it to work.
Cell H1 has a variable string of references for eg "FI570783AQ3516346EQ3516346FXVB123456"
I want to return the reference beginiing with "FXVA" so it would ignore the rest and only return FXVB123456 - this should always be 10 characters.
Just to add another complication to the mix, there may be 2 "FXVA" references in the string and i want to get both (these can be in the same string so FXVB123456FXEL123456 - but this might not happen regularly.
finding a code that would automatically insert various phrases into a column depending on whether or not the person in that row was due to renew their membership in our organization. The code I received works fantastically, but I've come across one snafu:
Is there possible filter a partial number in column?
i have many values in column, i want enter partial value in Texbox (ActiveX).
if i enter in textbox 6840.
Result 64801000 64802000 64803000 ############## if i enter in textbox 5480. Result 54801002 54802002 54801000 54802000 54801001 54802001 54801005 ###################
I have an excel sheet that we need to type in an account number it always starts with 8774100 then has 9 more numbers. If I leave it on number formating it always changes the last number to 0 so I format the cell as TEXT. Anyway is there a way to get the 8774100 to automatically go in and only have to type the last 9 numbers? I know I can copy paste but then I have to double click or make sure I enter the last 9 numbers at the end or use the top entry. The data entry people just want to hit enter and go from line to line fast. In the past I just divided the cell into 2 cells and made the 8774100 in column A and columb B was the ending 9 numbers. But they need to be in the same cell.
I am trying to find a formula that will count the number of unique entries there. I have tried the solutions posted on various websites to no avail (most recently:
Is there a way to do a COUNTIF on just partial text?
I know how to count how many cells in a column contain the text "cars" for example, but how would i write a formula that include cells with other text as well?
For example if 55 cells have "cars" as a value and 20 cells have "fast cars" as a value
I would want the formula to count 75.
Basically, it needs to count how many cells cars appears in, in a specific column, regardless of whether its alone in the cell or part of a sentence.
Right now, I'm trying to find a way to count the number of times a certain phrase appears in a column.
I'm currently using this formula for exact values: COUNTIF(A1:A5,"Hello"), but this only works if an entry in a column is exactly: "Hello"
I want to be able to count a column even if it has more words, such as "Hello how are you" etc., and this column would be counted because it has the word "hello" in it.
How to check for a partial match looking in one cell, A1 for example, and checking to see if the contents of B1 show a partial match (example attached).
I can't use the vlookup because I only want to look at cells specifically, not a table/list. Please also note that the attached example has no formulas.
I am copying text (contest results from another website) and posting into excel. As it is formatted on the original site, it posts the place, followed by a period, then the team name, then a dash, then the score.
Example ... 4. Smokers Purgatory - 662.2858
To place it in our database we need the period removed from the place, and the dash and score removed.
Example ... 4 Smokers Purgatory
Is this possible to automate in excel or is there a way to format so that excel seperates the place, team name and score? Or should I be looking for a different method?
I have VBA code that imports a text file using a fixed width separator within the code. The code is working just as I need it to work and placing the information/data in the columns that I have specified in the code.
The issue I have is I only want to import certain data that is contained within the text file. It is going to be a little hard to explain, so I have attached a sample of the text file with dummy data to better explain. The file is broken up into different segments. Each segment is identified by a “Base Number” in column A of the text file (once it has been converted into an Excel file).
For my example, I only want to import data for Base Number 38451. The information for this segment is easy enough to identify when the data starts and when the data ends. As in this example, the first occurrence of 38451 begins at row 257. Once the first instance of this number is identified, the first row of data that I require is always two rows after.
I think the coding should go something like this, but I just can’t figure out how to put it into my If cell in column A = 38451 then - start importing from 2 rows down - continue to import until next row in column C is not = date
If row in column C = blank then - search in column A until cell = 38451
If cell in column A = 38451 then - start importing from 1 row down - continue to import until next row in column C is not = date
Else - stop import
I have included two files. (1) the text file with the data (2) the Excel file. There are two tabs in the Excel file “ReconSheet” (contains the data that is imported from the text file) and “Desired Result” (this is how I want the end product to look).
