Creating Partial Number Ranges
May 26, 2007
I need to create a consecutive number range
from 10,770 to 14,194
(using only numbers that end in 0,1,2,3, & 4)
In other words, with No numbers that end
in 5/6/7/8/9
Example: 10,770
10,771
10,772
10,773
10,774
10,780
10,781
10,782
10,783
10,784
10,790
10,791
... and so on, upto 14,194
View 4 Replies
ADVERTISEMENT
Apr 25, 2014
Is there possible filter a partial number in column?
i have many values in column, i want enter partial value in Texbox (ActiveX).
if i enter in textbox 6840.
Result
64801000
64802000
64803000
##############
if i enter in textbox 5480.
Result
54801002
54802002
54801000
54802000
54801001
54802001
54801005
###################
View 6 Replies
View Related
Oct 24, 2008
I'm trying to figure out a formula to be able to look at a column of txt and if it finds the word total it need to output the number at the column next to it. If the word total isnt in the text then it should leave it blanks (see below). Basically I want a column that pulls only the totals amounts in the column.
Aaron Drielick 3
Aaron Drielick 2.5
Aaron Drielick 37.5
Aaron Drielick Total 151.0
Akila Subagaru 31
Akila Subagaru 1.5
Akila Subagaru 1
Akila Subagaru 1.5
Akila Subagaru Total35.0
Albert Major 4
Albert Major 6.5
Albert Major 2
Albert Major 19.5
View 3 Replies
View Related
Sep 19, 2006
I have an excel sheet that we need to type in an account number it always starts with 8774100 then has 9 more numbers. If I leave it on number formating it always changes the last number to 0 so I format the cell as TEXT. Anyway is there a way to get the 8774100 to automatically go in and only have to type the last 9 numbers? I know I can copy paste but then I have to double click or make sure I enter the last 9 numbers at the end or use the top entry. The data entry people just want to hit enter and go from line to line fast. In the past I just divided the cell into 2 cells and made the 8774100 in column A and columb B was the ending 9 numbers. But they need to be in the same cell.
View 2 Replies
View Related
Mar 9, 2009
I am attempting to create a formula for a project. The multipliers I use will be based off of # of units used. So lets say I have 500,000 units. The first 100,000 would be multiplied by 9.3, 100,000.01 - 250,000 would be multiplied by 9.5 and 250,000.01 - infinite be multiplied by 9.7. I know I can created different cells, but wanted to see if this could be done with one formula. I tried using sumif but that doesnt appear correct.
View 8 Replies
View Related
Mar 31, 2014
Right now, I'm trying to find a way to count the number of times a certain phrase appears in a column.
I'm currently using this formula for exact values: COUNTIF(A1:A5,"Hello"), but this only works if an entry in a column is exactly: "Hello"
I want to be able to count a column even if it has more words, such as "Hello how are you" etc., and this column would be counted because it has the word "hello" in it.
View 2 Replies
View Related
Jul 31, 2009
1. Counts the number of cells in a column with the same 18-character text string(Full String is 24) using a RIGHT( function.
2. Returns a 1 if there is 1 and a zero if the count is greater than 1.
View 3 Replies
View Related
Jun 3, 2014
I have to create ranges of unique numbers that follows the below rules.
1) Have to start with 3 standard digits (ie 101 or 102 etc)
2) The total length of the is has to be 10 digits (ie 1010123456)
3) The second part (the last 7 numbers) must be unique!
4) Can create a lot of numbers (more that 5000 rows)
5) thats all with the unique numbers
Continue,
Somewhere in the sheet has to be a search function to find where a specific id is located, make it red and copy/cut in to another sheet.
View 7 Replies
View Related
Aug 21, 2009
I have a long list of zip codes (this is just a small portion of the list) that I need to make into ranges. Is there a formula I can use?
From this list:
90080
90081
90082
90083
90084
[Code] ......
To this:
To From
9008090084
9008690089
9009190091
9009390099
9010190103
9017490174
9018590185
9018990189
9020190202
9020990213
9022090220
View 3 Replies
View Related
Nov 2, 2011
i am trying to write a macro to loop through a column of data, creating a named range each time it encounters a certain string. so, it inititially finds the first instance of the string, then finds the next instance, offsets one row back and then names that as the first named range. how do i get it to actually loop through the column until the end of the data?
I can get the first range named but can't figure how to get a loop into my macro to repaeat the process.
Code:
Sub x()
Dim rngTemp As Range
Dim rngFind As Range
Dim rngFirst As Range
Dim rngLast As Range
Dim nom As Range
Dim strFirstAddress As String
[code].....
View 2 Replies
View Related
Jun 19, 2014
I have a monthly report. Worksheets for each month, each row is a type of fruit (column A), and the number sold (column B). A new worksheet is added each month with the information. I also have a Summary worksheet - running total of all months: Type of Fruit (column A), Number sold (column B), and Total of all fruits - number sold. I would like a formula for the Summary worksheet - to match that fruit (column A) to any of the other worksheets - matching the fruit (column A), and bring back the number sold (column B). (note some apples are Fuji and some are Honey crisp - those would be totaled together)
ex:
Tab = Jan 14
Fuji apples3
Bananas2
grapes9
TOTAL14
[Code]....
View 2 Replies
View Related
Mar 26, 2013
I need to know if its possible, and if it is, what the formula would be to get the correct "Rate" to pull based on the criteria given:
User would input the following information:
Zip Code: 56559
Pallets: 3
Weight: 1200
The formula needs to use the following table to use the criteria listed above, to fine the correct "Rate". The "Zip Code" and "Weight" both need to fall between the correct ranges and then match the "Pallet" to find the correct "Rate".
From Zip Code
To Zip Code
Pallets
Weight From
Weight To
[Code]......
View 1 Replies
View Related
Jun 29, 2014
I want to find the number of similar values contained in a column based on a date range I specify.
I have a data set that's formatted like the following (you can see the full data set at [URL] but I've hidden the irrelevant columns and highlight the relevant ones)
[Code] .......
I want to use this data to create two types of graphs. One showing the ratio including all values in the Status column. There are 4 total (Open, Lost, Won, Won-Job Cancelled). I want another which excludes the "open" status from the ratio figure. I've create some images demonstrating what I want to accomplish at [URL] .....
Additionally, I want to be able to specificy date ranges for these charts. Specifically 0-30 days from todays date, 30-90 days and older than 90 days.
I want to accomplish this using Google Sheets (the latest version) and know how to use the graph total. It's just creating the data the way I need it which is proving to be the most challenging.
View 1 Replies
View Related
Apr 1, 2009
i have a table of tools and their properties which i am using to provide validation lists for a number of other worksheets that record when those tools were last calibrated/tested and when they need to be calibrated/tested next.
many tools require more than one form of testing (electrical and/or calibration), but not all tools require both.
can i create some kind of drop-down menu the looks at the tool master list, but only gives the option of those that require the particular type of testing i'm recording on that particular list? how can i create a drop-down list that is more limited than the range i have selected for it to display?
View 10 Replies
View Related
Jul 28, 2014
Is there a way to add cascading lists (from data validation or form/activex controls) to my excel spreadsheet WITHOUT using named ranges? Maybe structured references?
I need to avoid the named ranges because it will cause my workbook to have duplicate named range titles which I cannot avoid.
As a general example my issue arises because I have something like this where the titles are the same but they map to slightly different data. These also have to be cascading because the titles align to another list which I do not show in the example. I also considered using pivot tables, but the issue there is that the data validation lists repeat in the same worksheet. So I would have 3 cascading lists in row1 dependent on each other, but the same 3 lists in row2 dependent on row2 but not the previous row.
[Code] .....
View 3 Replies
View Related
Mar 13, 2012
I need to create hundreds of named ranges going down a single sheet.
The name of the first range is in cell a1 and is 13 columns wide and 7 columns high (a1:m7)
The next name is in a8 and the range is a8:m14 and so fourth
If it's easier on a separate sheet I can have a list of names I want in column A and then the cells they refer to in column B.
E.g.
A B
Range1 Sheet1!A1:M7
Range2 Sheet1!A8:M14
Range3 Sheet1!A15:M21
View 2 Replies
View Related
Jul 31, 2014
I have an excel database where I register cases. I have in it a button that creates a folder with and ID nr that is in column A (I create new ID nr in the next row, when I press the button it will create a folder with that ID nr and inserts a blank word document in it). We have a template that we copy to the folder (depending what type of case). The idea would be that once the template is filled in and ready to print, It would take the values from the ID nr and a reference number a few cells to the right. Is it possible to tell excel to open the word document in the folder and create a PDF version with the ID nr and reference number. (there are only 2 templates, so the macro would have to look for one of the two in the folder) The names of the templates are: "Standard" and "Other". I guess the best way to start maybe this would be that I select the cell with the ID nr and then press a macro button to have this done. One thing that needs to be done, is to put a copy in the same folder and another in a second folder called "Binder" in my documents folder.
View 1 Replies
View Related
May 20, 2014
This is for Excel 2007,I have two sets of model numbers. One set is the full model numbers of the units we use, and the other is an abbreviated form used to lookup up certificate numbers. I need a way to match these up so I can use one set of search criteria to find out if there is a match. Here is an example of what I need to match with a partial text match:
H,AE35(6,9)36+TD and AE3563636D145C2501AP
H,RE36(6,9)36 and RE36936C145B2505AP
if I could do this with a formula that matches multiple items at the same time (ie; if A & B & C match=true) with the above model number being one of those items (certificate numbers are issued for sets, but the other model numbers are fine).If that's not possible, a one time VBA run to match all of the abbreviations at once would also work. If these items are matched up with a one time VBA, the VBA needs to account for their being more than one match for each abbreviation depending on the size of the unit.
So H,AE35(6,9)36+TD could be matched to:
AE3563636D145C2501AP
AE3563636D175C2501AP
AE3563636D210C2501AP
View 11 Replies
View Related
Feb 6, 2014
I am running an ordering sheet that I need to attach reference numbers to, no format for the reference number has been determined.as yet. I need this reference number to change when the 5 digit number changes, see example attached.
Capture.jpg
View 11 Replies
View Related
Feb 21, 2013
I need to create a grouped sequence that changes every 10 rows.
So in Column A cell A2 the number would start at 01349 and every 10 cells it would decrease by 1 and go on down to 0
so it would look something like this:
01349
01349
01349
01349
01349
01349
01349
01349
01349
01349
01348
01348 ...
View 8 Replies
View Related
Feb 25, 2014
How I can create randomize number sets?
Number range 1-80
in each set: 10 random numbers
How many number sets: 5 sets
View 1 Replies
View Related
Jun 12, 2014
I have a column with values:
15 1 16 11 2 15 31 30 26 49
Need to build a diagram, like parabola.
Once again, the task:
For example, we have a number 2, 5 and 10. It will hit 1-2 3 times, 2 times 3-5, 6-10 1 times.
And that we get a parabola.
Example:
How to do it?
View 1 Replies
View Related
Jul 16, 2006
I am trying to get a sheet to automatically calculate week numbers from a given date (start) and the current date, the problem I am having is I only want to cycle 18 weeks not 52.so weeknum wont work
ie
10 weeks after start date would return Week 10
18 weeks after start date would return Week 18
19 weeks after start date would return Week 1
25 weeks after star date would return Week 6
37 weeks after start date would return Week 1
etc...
View 6 Replies
View Related
Nov 19, 2002
Need a formula that will count the number of occurrences of that same number in three different ranges. The number that is to be compared to is in a cell that is a result of a formula.
Example:
Lowest number found in three ranges: 30 (Answer is in A1)
Question: how many times does that number appear in the three ranges?
Syntax:
=Countif(Range1,range2,range3=A1)
Has to equal the cell reference value (A1), not a plain number (like 30)
View 9 Replies
View Related
Feb 4, 2009
I have a whole list of numbers (e.g. 7, 23, 567) and I would like to be able to tell which range they fall within and return the category.
MinMaxCategory
1275Group A
276375Group B
376600Group C
601825Group D
8261,075Group E
Therefore 7 and 23 would be Group A, and 567 would be Group C. I can do as a long nested IF, but I'm sure there must be a better way.
View 2 Replies
View Related
Dec 14, 2007
I have many columns of data, each containing numbers ranging from zero to 100. I am trying to determine the formula to count how many of these numbers fall into different defined ranges;
e.g. how many pieces of the data are numbers between 90-99, how many are numbers from 80-89, 70-79, 60-69, etc continuing on down.
I attached a sample workbook which may be clearer: there is a tab (titled "data") with 3 example columns of data & there is a tab (titled "counts") where I hope to get counts for each range to be generated by a formula rather than count them myself.
Not sure if the following is possible, but this would be even faster if each column didn't have to first be sorted ascending/descending for the formula to be effective (as I have hundreds of these columns).
View 3 Replies
View Related
Apr 8, 2014
I have been trying to create a formula that will save me DAYS of messing around at work.
What I am trying to achieve is to have a sequence of numbers as follows:
BNA01A01 to BNA01A09 then have it change to BNA01B01 to BNA01B09.
This needs to be repeated for all letters to BNA01I09.
Then this sequence needs to be repeated to BNA12.
The last thing is for me to be able to change the formula in order to implement the same sequence on a separate sheet for BNB01A01 - BNB12I09 to BNL01A01 - BNL12I09
View 2 Replies
View Related
Jul 7, 2012
I am having some difficulty with a pdf that I converted to an excel document because I wanted to use the data from the pdf tables in a different program I am currently working on. However, the data is in the improper format. For example, in the table it reads 2-1/8 as string and I want it to be the number value 2.125 . Likewise if the value in the table reads 5-1/4 I want it to automatically convert it to something that will be read as the number 5.25
View 4 Replies
View Related
Jan 17, 2014
I had some number combinations as this 5-23-34-233, 50-233-34-45, 34-5-23-45-67. The length can be variable in column A.
I want a formula which should return array of numbers of each cell in column A. So if A1 has 5-23-34-233 so the formula should return array like {5,23,34,233} and like wise.
View 8 Replies
View Related
Aug 1, 2014
I am trying to create a number counter which runs up to a value which is determined by a COUNTIF Statement in the spreadsheet. I can get the number counter to run to the given value. However, due do formatting reasons I do not want the counter to start in cell A1 but A3 instead.
Essentially my code looks like this:
...
ActiveSheet.Cells(3, 1).Select
Dim i As Integer
For i = 1 To Range("A1")
Cells(i, 1) = i
Next i
...
View 3 Replies
View Related
