Im trying to put a IF statement together to use the in between function.
I have a table (days) from 1 to 5 ie 21
I have a column of aged purchase orders and im trying to do a IF statement based on the table.
I am trying to write a nested if statement for my excel table. I calculated the betas of the stock portfolio. I would like to create an if statement that would do something like this:
if beta is less than 1 -- Below Average Risk
if beta is greater than 1 but less than 1.25 -- Average Risk
if beta is greater than 1.25 but less than 1.75 --Medium Risk
if beta is greater than 1.75 -- High Risk...
I am attempting to return a value in a table using an IF statement, but without referring to other values in the table.
My first column contains price break quantities;
5
10
20
50
70
100
The top row contains selling quantities;
1410192541517699105
The IF statement should return a "Y" in the cell if the value in the top row is greater than the value in the first column, but only for the relevant price break, i.e. the column with 51 in the first row should only have a "Y" in the row with 50. This would be much easier if I could work out how to post the workbook!
The formula cannot refer to other row values (otherwise it would be easy), and cannot use VB.
So far, I have come up with;
=IF(AND($C6
Excel 2010. I set up a trial balance as following:
1/31/2000 2/28/2000 3/31/2000 ------- 12/31/2012
Acct # 1
Acct # 2
Acct # 3
Acct # 4
I was able to use pivot table to set up the balance sheet and income statement.
1. now each month is a field which I can choose to add to the report, but the field list is getting too long (and growing). Is there a way I can insert 1 field (for the user to input the exact date) or 2 fields (to input year and month) and the pivot table can pick up the input and refresh either automatically or manually.
2. I looked into the "group" function in pivot table, but how do I group the above data in quarterly and yearly fashion so the user can get those information quickly?
Is it possible to use an IF statement based on Dec 31 - of any given year? If Cell B22 contains Dec 31 (year doesn't matter), I need to subtract 1 day from the date in Cell F2. This only pertains to Dec 31. If any other date of the year is in B22, no calculation should take place.
View 3 Replies View RelatedIs there any way to do an IF statement that is based on the format of another cell. For example
View 3 Replies View RelatedI am looking to modify the formula below. Rather than specify the time "TIME(20,55,0)", I am looking to pull the time from another cell within the spreadsheet.
=IF(B6="","",IF(E7-INT(E7)
I have a data of 10 rows and 6 columns, if i delete the data in column 1, I want the entire row 1 to get deleted and this I want using IF Statement.
View 2 Replies View RelatedI am looking for a way to say
IF A2>9 then B2 returns bronze
IF A2>24 then B2 returns Silver
IF A2> 49 then B2 returns Gold
IF A2>99 then B2 returns Platinum
If I have any value in cell A1 then the cell should show 1 if true or nothing if false. I have managed this via
View 3 Replies View RelatedG5 - can contain True or false
G6 - contains text but the if is on the basis of this cell being "Hand Delivered" or not
I have tried the following to illustrate what I after:
I have a validation list list in column E "Check, Charge, Credit Card, Other". in another column i have what i thought was a straight forward IF statement: =if(E3="Check",9999,"[ ]")
It does not recognize "Check" as the condition. Is there a tweak i can do to get it recognize the data validation.
I am working in cell T3 of 'workbook A'.
I want to lookup a value from cell C4 in 'workbook B' if the value in cell G3 of 'workbook A' equals "Yes". If the value of cell G3 in 'Workbook A' equals "No" I need the value to be 0.
Is it possible to have a If statement based on the cells text color.
ie
If(color of A2=RED,1,2)
So if Apple text was colored red the result woud be 1
If the Apple text was black the result would be 2
I want to copy a row based on a certain condition. I have 700 rows of data on sheet 1. If Cells in column A contain an X, copy row A# to sheet 2. If there are more than cell that has an X copy all of the rows, naturally. Can this be done with a simple conditional statement, or am I going to need to generate an array, then write that array to sheet 2?
View 4 Replies View RelatedI have created a checklist using "Marlett" checkboxes. I have the names of choices in column B the Checkboxes in column C. In another sheet I want to populate only the names of the choices chosen without any of the spaces that a traditional if statement would populate if it was copied down a column.
View 3 Replies View RelatedTwo part question:
1. How do I structure an IF statement based on a specific cell color (e.g. if a cell is yellow, then perform function x)
2. How do I know what color is what? Is there a pantone reference? A color "name" that excel uses?
I'm having a bit of trouble with a macro designed to read the length text in a cell and if it = a certain length then perform an action (in this case Text to column)
Here is a small sample of the data I'm working with:
Tue 02/11/2014
LastBootUpTime
20140211082244.222441+000 <<
Tue 02/11/2014
LastBootUpTime
20140211082244.222441+000 <<
Tue 02/11/2014
LastBootUpTime
20140211082244.222441+000 <<
Tue 02/11/2014
LastBootUpTime
20140211082244.222441+000 <<
Tue 02/11/2014
LastBootUpTime
Tue 02/11/2014
LastBootUpTime
20140211082244.222441+000 <<
*End Sample*
The text length I want it to perform the action on is highlighted with "<<" if the length of text does not meet the required number then I want the statement to skip and move onto the next one.
I have the text to column code already done with relative references however the long text string I want the statement activated on is not always present which means that the pattern (0,3) is not always consistent.
I was trying to use an if statement to produce results based on 2 cells. The number in the 1st cell can be the number 1 to 5, but each number has critera with it. Say the cell is A1 and i enter the number 1. Then i want to check the value of Cell A5, if this is less than 40 then the cell A10 should read 250 and if A5 was over 40 then it should read 285. struggled to get a formula properly to work.
Here are the values for each number: A1 = 1 with cell A5
I am trying to pull certain members loads from our global design force spreadsheet and because of the naming convention we used for our structural members the 2nd to last character is unique to what I am looking for. I am trying to get a simple condition statement that will display the load only if the 2nd to last character of the name of the element is satisfied.
For Example, if "T" is what I am looking for then :
EDT4 will be true and give me the value accordingly
D10T1 Will also be true and return me the value
D10B2 Will not be true
I know how to use the Mid() and right() function, but I need to check the 2nd from the right.
I am trying to get an IF Statement created based off a checkbox answer.
I have a cell reference C2 from Checkbox that is answer Y.
If "Y" I want to calculate *0.005+0,0.03),0)*C4.
I need to skip the 1st & 2nd quarter after C4 before the calcautaion starts.
Then continuing no greater than .03 till the date changes.
I have tried to rearange this formula every way I can think of to get it to work like I want it to.
a correct formula for me to get this to calculate?
I've been working on this project to propagate certain products through multiple categories. I chose to use excel to assign multiple categories to each product. On sheet1 I have setup products (column a) and qualifiers in the following columns (color, model, etc). What I would like to achieve is for the user to select yes or no for each category column and and if yes then have the corresponding category breadcrumb string (from sheet2) inserted into one specific column in sheet3. As the user continues to select multiple "yes" from the category columns for that single product, those additional category breadcrumbs get inserted at the end of the list in sheet3.
View 9 Replies View RelatedOK i have put the membership cards on the same sheet as my raw data so to make the formulas easier. On the membership card i have under membership level i have the formula : =VLOOKUP($J$3,A:E,4,FALSE)
there is 3 types of level bronze, silver and gold
what i would like is if the level is gold after then an image to be placed in the cell rather than the word gold and a different image for silver and a different image for bronze.
I have 4 and 5 digit numbers. For the 4 digit numbers, I want to be able to distinguish between the numbers by the last digit. For the 5 digit numbers, I want to be able to distinguish between the numbers by the last two digits.
Example: For 4 digit numbers, I would like to do something with all numbers ending in 1, 2, 3, 4, 5, 6, 7, and 8. For 5 digit numbers, I would like to do something with numbers ending in 10, 11, 12, 20, 21, etc.
The first step in being able to do this, I guess is distiguishing between 4 and 5 digit numbers, which I know can be done by the number lenght. However, the second part of looking at the last digit or the two last digits I don't know how to do.
I am trying to basically search for the last non zero entry in a column and then return a value in the same row as that last non zero entry.
For example:
My first column of the table is time, second column is submission/marking of coursework (denoted by +1 & -1) and the third column is the number of courseworks awaiting to be marked. My aim is to search the third column for the last non zero value then return the time (from first column) that last non zero value appears.
Part 1: Pricelist
The user presses 1 of 3 macro buttons to access the price list.
The buttons represent 1 of 3 parts of a construction project.
The buttons are labeled PHASE 1, PHASE 2 & PHASE 3. The macro,
depending on which button is pressed, hides all but the relevent quantity
col & total col.
Each job phase needs its own total & having it setup this way makes it
easier to enter new items into the table (only have to enter
the item once, rather than 3 times).
The first html shows a simplied example of the "price list" described above
(before & after the quantitiy & price cols are hidden).
The user adjust the quantity & the sheet calculates the price total.
Part 1: Material listThe material list is a list of items & quantities the user selected in the
quantity col of Price list. This list is to be printed & given to the workers.
It does not show price, only item & quantity.
This list, unlike pricelist, must be visiablly broken down by job phase.
I dont want the material list to be the price list repeated vertically
on a sheet 3 times. This would take up too much space & require new
items to be entered once in the pricelist & then 3 times in the mat list.
I would rather the mat list be on a seperate sheet from price list & have
a formula in cell matlistA1 that searches the phase 1 quantity col
(then phase2 & 3) for the first #>0.
When a #>0 is found, the formula
would return an item name into the cell on matlist. Then the formula
would run in matlistA2, & search for the next #>0.
(& so on until a complete mat list table, broken up into phases is created)
Sheet2
ABCDEFGHIJK2 3 4 PRICE CALCULATOR (USED TO ESTIMATE ANY OR ALL 3 PHASES OF CONSTRUCTION) 5 6 7 *this is how table appears before macro button named job PHASE 1-3 is pressed to access. Macro hides 2 of 3 quantity cols & 2 of 3 total cols. 8 9 10 11MATERIALSQUANTITY PRICE TOTAL12MISCELLANEOUS PHASE 1PHASE 2PHASE 3 PHASE 1PHASE 2PHASE 31399871009'x12' PLASTIC DROP CLOTH1 X4.73=4.73
..............................
I have an 'existing results table' as per my attached sample. From this table I need to create a list of 'sold' for each annual date range - i.e. I need a separate list for items sold within that date range. see my example in red. *Note. I am working with Excel07 however my attached sample is in Excel03 because I couldn't upload an XLSX file.
View 4 Replies View RelatedI have three sheets of data, each sheet has various columns of data, but within each sheet, column one contains a unique reference number (URN), which is a unique six digit number identifying an organisation.
In sheet two I need to create a new column and call this 'Filter Group'. In that column I want to insert a series of IF statements to return a value from all three sheets. The difficulty I'm having is that I can't get the if statements to work specifically for when the URN in sheet one or three match the URN in sheet two.
Sheet two is my main data sheet. Sheet one is called '2 Weeks Previous' and sheet three is called '2 Weeks ahead'. The IF statement I have created so far is as follows:
=IF('2 Weeks Previous'!H:H=1,"ENF grade 1",
IF('2 Weeks Previous'!H:H=2,"ENF grade 2",
IF('2 Weeks Previous'!H:H=3,"ENF grade 3",
IF('2 Weeks Previous'!H:H=4,"ENF grade 4",
IF('2 Weeks Ahead'!B:B<>"",'2 Weeks Ahead'!G:G,
IF('Background data'!H:H=2,"All-Good","NotRequired"))))))
I need some different columns within a row to calculate based on a statement found in an earlier column in the row. something similar to below. there will only be two statements total which are noted on the table below.
A
B
C
D
E
1
0
0
20
5%
[Code].....
So basically If column A = disposition calculate D and E in column B but if Column A = Receipt calculate in column C
The formula for D and E is not exactly as shown just using that as a quick example. I'm using office 2010.
I have a worksheet with a range of dates in column E. What I would like is a formula that states If any of those dates is less than or equal to 10 (days) from today and column H text is not "Yes" then show text "Email outstanding Actions" else show nothing?
View 4 Replies View Related