IF Statement- Created Based Off A Checkbox Answer
Aug 29, 2008
I am trying to get an IF Statement created based off a checkbox answer.
I have a cell reference C2 from Checkbox that is answer Y.
If "Y" I want to calculate *0.005+0,0.03),0)*C4.
I need to skip the 1st & 2nd quarter after C4 before the calcautaion starts.
Then continuing no greater than .03 till the date changes.
I have tried to rearange this formula every way I can think of to get it to work like I want it to.
a correct formula for me to get this to calculate?
View 9 Replies
ADVERTISEMENT
May 20, 2014
In cell K8 is the value (General) 800. In C8 is the value (Also general format) 768.
=IF(C8
View 4 Replies
View Related
Nov 26, 2006
How can I get this to read each, (if (and statement) and give the correct answer. And not give me the 1st underlined statement answer in cell D10. If that also equals true.
But if any other cells G11 thru G14 equals OUT. It still will give the 1st statement.
I need the answer to be the only one of them correctly that’s equal true.
I know that the 1st underlined statement = true. Because G15= OUT .....
View 9 Replies
View Related
Dec 27, 2013
I have 3 checkboxes on a worksheet. I have a command button to copy/paste data that is captured from a device.
I want the data to go to the ranges that are selected by referring to the true/false driving mechanism of the check boxes.
Obviously if more than one button is checked at one time, the whole shooting match will blow up.
So....how can I allow only one check box to be active at any given time? I'm thinking perhaps a select case statement that refers to the possible conditions of true true true, true true false, true false true, etc....If that would work, how could the code be simplified?
Let's call them cb1, cb2 & cb3. Is this even possible??
View 5 Replies
View Related
Jan 1, 2010
I want to tell Excel that, if a cell value is between 1 and 100, to enter one result in another cell. If the value is between 101 and 250, enter another result in that same cell. If the value is between 251 and 500 enter another result in that same cell and so on about another 12 times.
View 5 Replies
View Related
Aug 29, 2009
im looking to return an answer in cell c28. in b28 it will say "best goalkeeper"
in c28 i need a formula to look in range d2:d6 then return the highest answer and correspond that to whats in b2: b6. so we could say
(b2)shilton(d2) 33
(b3)corrigan (d3) 55
(b4)parkes (d4) 66
(b5)schmeichel (d5) 100
(b6)cudicini (d6) 14
in c28 it will return the answer schmeichel because he is the highest
and in d28 it would return the points he has.
View 2 Replies
View Related
Jun 30, 2008
I am trying to write an excel sheet that has multiple questions but need to be answered in order and the next question in the series answers should appear based on the answer to the previous question.
expample:
Question 1: Steel or Aluminum
Question 2: (If the answer was Aluminum) 3000psi or 3300psi
(If the answer was Steel) 2640psi or 3442psi or 3500psi
Question 3: If the answer to #2 was 3000psi: 50,63,80
If the answer to #2 was 3300psi: 100
If the answer to #2 was 2640psi: 66,85,95,98,104,112,125
If the answer to #2 was 3443psi: 80,100,120
If the answer to #2 was 3500psi: 65,80,100,120
I want the choices for the next question to be hidden before the previous question is answered and the choices based on the answer to the previous question. Would love to be able to use a drop down box to do this with.
View 4 Replies
View Related
Feb 11, 2014
I have 2 Combo boxes and I would like to do the following:
If Combo Box 1 = Answer A then populate Combo Box 2 with dynamic list "List A"
If Combo Box 1 = Answer B then populate Combo Box 2 with dynamic list "List B"
View 1 Replies
View Related
Feb 6, 2014
I have been struggling with this formula for ages and have finally given up. What I would like to do is to do a lookup on the concatenated values of Province, Department and Initiative No, which has mutiple values in the status of milestone column, and then give the answer based on a condition.
The condition for this example should be, that if the returned status / or statuses of the initiative is all 1, then the value should be 1, if it's all 2, then the value should be 2, and so on.....but if the values returned from the status of the initiative is a combination of 1,2 or 3, then it should give me the answer 2. If 4 is part of the comination of values returned, then the value should be 4.
Zero - 0 should be excluded from the formula as it is part of planned values and not actual.
View 5 Replies
View Related
Dec 27, 2012
I am trying to created a spreadsheet for work where I have created to validation drop down boxes, one each box has been selected i want it to return back with the correct answer in the 3rd column.
below are the 3 colums. i have created a validation for column 1 and 2 but when selected i want the final box to = column 3 ie. >=9, =2
120%
12
>=2
130%
13
>=2
140%
[code].....
View 9 Replies
View Related
Sep 26, 2008
I am a newbie to Excel. I really appreciate if someone could help me here and this is very urgent as I have a project going on.
I have a cell say B3, which is a dropdown list I created using Data Validation. It only lists down Yes or No.
What I need is when you click on Yes in B3, i need columns C to I to unhide. If answer is No, column C to I should be hidden. By default, the columns will be hidden.
Can you please help? I tried many times but not successful. Appreciate if someone will be able to walk me through details. If you want to see the sample spreadsheet, I can sent it to you by email. I tried Data> Outline group but they are not happy with this.
View 9 Replies
View Related
Mar 23, 2014
I have a set of 4 multiple choice answers B,C,D,E column "F" lists a # 1-4 which lets you know which column letter (b,c,d,e) the correct answer is in. I want to set up a formula that will copy the contents of the correct answer (based on that # identifier) and copy it into column "A" which is currently blank.
View 7 Replies
View Related
Mar 23, 2014
Here's an example of what i want to do
A_________ B Frank Sinatra C Sammy Davis D Dean Martin E Joey Bishop F 3
I want to put "D"'s value 'Dean Martin' in column A - i know it belongs in A because the "3" in column F indicates its the 3rd answer listed i.e Dean Martin. This format would be the same where there are 4 possible answers on the column to the right dictates which answer is correct.
View 2 Replies
View Related
Aug 4, 2006
I am about to write a macro and I want it to identify, from the C: drive, any .csv files that were created / saved today. I have managed a pure list before and I have managed to distinguish by filename, but selection by date would be exctremely useful.
View 2 Replies
View Related
Jan 16, 2008
I have a worksheet with several rows (A3:H70). Column J contains checkboxes (1 in each row). I'm trying to develop a macro that will clear rows based on the value of the check boxes. For example, if the checkbox on J3 is checked, that row (A3:H3) will be cleared.
If the checkbox on J4 is UNchecked, then that row will be skipped and so on.
View 9 Replies
View Related
Mar 22, 2014
How to create a spreadsheet with what I think will be a very simple formula?
If date in B2 - date in A2 is 1 or less days, put a 1 in cell C2.
If date in B2 - date in A2 is 7 or less days but more than 1, put a 2 in cell C2.
If date in B2 - date in A2 is 30 or less days but more than 7, put a 3 in cell C2.
If date in B2 - date in A2 is 90 or less days but more than 30, put a 4 in cell C2.
If date in B2 - date in A2 is 91 days or more, put a 5 in cell C2.
OR
Another, maybe simpler, way of saying it is:
If date in B2 - date in A2 is 1 or less days, put a 1 in cell C2.
If date in B2 - date in A2 is 2-7 days, put a 2 in cell C2.
If date in B2 - date in A2 is 8-30 days, put a 3 in cell C2.
If date in B2 - date in A2 is 31-90 days, put a 4 in cell C2.
If date in B2 - date in A2 is 91 days or more, put a 5 in cell C2.
View 9 Replies
View Related
Jan 4, 2013
I have multiple comboboxes with correlating checkboxes. That is, checkbox 1 goes with combobox 1, 2 goes with 2, etc.
When a particular button is pressed, I would like the combobox to clear it's value if it's checkbox value is false. I was hoping there would be an easier, more efficient process than what I have, which works and is as follows:
VB:
Private Sub cmdbTest_Click()
z = "dep"
Call TestSub(z)
z = "loc"
Call TestSub(z)
[Code]...
I currently have 8 comboboxes. Tags were used for the comboboxes during another process which are not used on the checkboxes, so that option is out.
View 1 Replies
View Related
Mar 20, 2012
Here is what I have so far (debugger highlights my CheckBoxLD.Visable arguments)
Yes, this is an activeX checkbox
Code:
Private Sub Workbook_SheetCalculate(ByVal Sh As Object)
If Worksheets("Dosing").Range("BM21").Value = 0 Then
CheckBoxLD.visable = False
Else: CheckBoxLD.visable = True
End If
End Sub
View 4 Replies
View Related
Jan 26, 2007
I have several checkboxs in an excel sheet, that if one is checked i would like it to make a change to a variable in a macro that will run when saving a file.
for an example:
if checked:
Checkbox1 = NCE1
Checkbox2 = NCE2
Checkbox3 = NCE3
Checkbox4 = NCE4
Checkbox5 = NCE5
I have a bit of code that is like this....
ActiveWorkbook.SaveAs ("\marketing2PartageNonconforms" & sF1 & " - CO" & sF2 & " - FC" & sF3 & ".xls")
I would like sF1 to change depending on which checkbox is checked. so if checkbox1 is checked, than sF1 = NCE1 .
View 9 Replies
View Related
Mar 20, 2014
I have a part of code but would need to see if there is a simple way to combine all my textbox to become negative value If my Combobox is checked.
In my Module, This will Calculate my Textbox11 each time I call for my Sub
This will call my Sub updateTextBoxes() I have set up from Textbox2 to textbox10
In my Userform I have a CheckBox1. If this CheckBox1 is Selected then I need to change the entry of all Textboxes(2-10) to be negative Value.
Works well right now but I need to identify all Textbox separately how could I bundle this up... even if a module is called...
So IF checkbox1 = True then textbox2 to textbox10 will = a negative value... If user adds 2 to textbox2 when the checkbox1 is = True then 2 will turn to -2
View 3 Replies
View Related
Dec 26, 2008
Could anyone please help me frame a vb code for the below explanation?
I have a sheet where in some terms are provided. Users have to open this sheet and check its description. After going through all the terms, they have to select the required terms using a checkbox given beside these terms. After checking the reqd. boxes, they would click on 'Submit' at the end of the sheet.
Once Submit is clicked, a new excel workbook should open up with the selected terms as various column headers.
View 10 Replies
View Related
Jan 23, 2010
I have a userform with a checkbox. If the box is checked, I would likke to write "Option One" to cell A1 in Sheet1 when the Close button is clicked. I can't get the code correct for this. The workbook is attached.
View 2 Replies
View Related
May 22, 2012
VBA Code
I would like to combine data into one cell based on check box selection. I have 25 check boxes all named CheckBox1, CheckBox2, etc...
The data will be placed in cell "Q10".
Checkbox 1 would use the data from "AL130"
Checkbox 2 would use the data from "AL131"
etc...
There could be any combination of Checkboxes selected.
Each selection must be separated by a comma.
View 2 Replies
View Related
Oct 23, 2008
I am attempting to modify a spreadsheet so that it will enable a range on Sheet3 (I9:K42) if a check box is checked on Sheet2. If it is not checked, it will lock that range on Sheet 3 and grey (or gray, if you prefer) out that range.
View 9 Replies
View Related
Jul 19, 2006
When I click this button, a new row is inserted. Depending on whether this checkbox is checked, I want some of the formulas to adjust.
Public Sub AddEntry()
thisone = ActiveSheet. Name
FinalRow = Range("A65536").End(xlUp).Row
Range("A" & FinalRow + 1).Select
Selection.EntireRow.Insert 'just inserted a new row
x = Range("T1").Value
Sheets("Calculator").Select
Rows(x + 3).Select
Selection.Copy
Sheets(thisone).Select
Rows(FinalRow + 1).Select...........................
View 3 Replies
View Related
Jan 18, 2008
I want to write code for a Checkbox that when checked it fills a cell with a color, but if it is subsequently unchecked, the cell color disappears.
View 9 Replies
View Related
Jan 23, 2008
I have a Worksheet_Change event like the one below. When Checkbox1 is ticked the it subtracts and when it's not, it adds:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim intValue As Integer
If Not Intersect(Target, Range("W12:X24")) Is Nothing Then
intValue = CInt(Target.Value)
If CheckBox1.Value Then intValue = intValue * -1
Select Case Target
' Apples
Case Is = Range("W12")
Logbook.Show
Range("I10").Value = CInt(Range("I10").Value) + intValue
Case Is = Range("X12")........................
View 7 Replies
View Related
Jan 30, 2008
I am good at excel but an infant with VBA. I have inserted a checkbox onto my worksheet. I want it, when checked, to select a row of data ("k5:k16") from Sheet 1 and copy it to ("a1:a12") in Sheet 5. When the checkbox is unselected, I want the ("a1:a12") to be cleared. I've tried several different ways to copy and continue to run into errors. I know there is a simple solution, but it's beyond me.
View 2 Replies
View Related
Mar 12, 2008
I have a checkbox and a command button on my sheet. I want that, depending if the checkbox is marked or not, I can call two different macros. I don't know if this is possible at all or maybe can be done easier otheriwise, but this would more or less be my idea of what should happen:
Private Sub CommandButton1_Click ()
' If CheckBox1 = marked
Call MacroA
'Else (CheckBox1 = unmarked)
Call MacroB
' End If
End Sub
View 4 Replies
View Related
Jun 4, 2008
I currently have a spreadsheet with a userform that has multiple checkboxes. I want these checkboxes to change the value of cells depending on whether or not they are checked. 1 for not checked, 2 for checked. The column of the named range the cells are in is constant for each checkbox (though it is different for each checkbox and some checkboxes will need to change the value of a cell in multiple columns). The row changes depending on the value of a combobox on the userform. I have sorted out a code that works, but it seems very long, slow, and inefficient. I'm hopping someone can show me a better way to do it.
Private Sub CmbFinish_Click()
Dim rClSkills As Range
Dim rClLookup As Range
Dim var1 As Integer
Dim iDecision As Integer
Set rClSkills = Range("TblClSkills")
Set rClLookup = Range("ClassLookup")
iDecision = MsgBox("Are you sure you wish to change Skills?", vbYesNo, "Continue?")
If iDecision = vbYes Then
var1 = Application.WorksheetFunction.Match(cboClass.Value, rClLookup, 0)
If CboAppraise.Value = True Then.............................
View 6 Replies
View Related
