I am working in cell T3 of 'workbook A'.
I want to lookup a value from cell C4 in 'workbook B' if the value in cell G3 of 'workbook A' equals "Yes". If the value of cell G3 in 'Workbook A' equals "No" I need the value to be 0.
I have a list of dates going through several years of data - month ends and starts don't always coincide with calendar months. I need to figure out a way to get the oldest date of the previous month, for example. Tried vlookup but could figure out how to do it for one year only, hence not as applicable with several years of data.
View 9 Replies View RelatedI am trying to do a lookup from the price list based on the below data file, my problem is I need the price that falls within the qty range from the price list, the price list is not consistent and changes with every item. I would like one formula that is sophisticated enough to work no matter where the qty range lies.
Item #_____Qty Ordered________Price List
20800______1,500
20800______4,000
20800______6,500
20800______8,000
20800______9,050
20800______11,000
20800______14,000
Price List
Item #____Order Qty________List Price
20800_____2,000___________$3.00
20800_____4,000___________$2.95
20800_____6,000___________$2.90
20800_____8,000___________$2.85
20800_____10,000__________$2.80
20800_____12,000__________$2.75
20800_____14,000__________$2.70
I need to add a Bloomberg BDP function to my lookup statement. The formula that i'm trying to replicate in VBA is =IF(ISBLANK(h23,"",BDP(H23&" cusip","long_comp_name")). update my macro.
View 9 Replies View RelatedI need a formula that would be able to calculate the distance from the start
of a code to the end of a code. An example table is below. The start and
end of a code is indicated in the CONT. column. (Start of first code = S1,
end of first Code = F1, Start of second code = S2, end of second Code = F2,
etc.) Maybe a table could be used (E1:F2) that shows the corresponding Start
& Finish Codes. Two conditions need to be met before the length (in DIST
column) is to be calculated, the Report numbers and the Codes must be the
same for both rows.
ABCDEF
1S1S2
2REPORTDIST.CONT.CODEF1F2
31005S1B
410010S2A
510012F1B
610014C
710016F2A
82002B
92004S1B
1020010F2B
In the table above:
- Code B in report 100 would go for a distance of 7 (12-5).
- Code A in report 100 would go for a distance of 6 (16-10).
- Code B in report 200 would go for a distance of 6 (10-4).
How the Lookup will break down within an IF statement?
Original
HTML Code:
'ActiveCell.FormulaR1C1 = _
"=IF(R[-1]C[-2]"""",LOOKUP(1000,SEARCH({""Principal"",""Foreclosure"",""Interest"",""Premium"",""Discount""},RC[-1]),{1,1,2,2,2}),"""")"
Non-Working If statement. I realize that the Lookup isn't currently here. Including it kind of defeats the purpost of breaking this out into IF's, doesn't it?
HTML Code:
If MyFirstCell.Offset(0, -2) "" Then
MyFirstCell.Offset(0, -1) = Search("Principal")
MyFirstCell = 1
ElseIf MyFirstCell.Offset(0, -1) = Search("Foreclosure") Then
MyFirstCell = 1
[code].....
I am trying to figure out how to build a drop-down menu with VBA that has 2 built in choices, 'call' or 'put', and based on the selection in the drop-down list (call or put), the value in the cell directly to its left will be 1 (if 'call' is selected) or 2 (if 'put' is selected).
I have tried doing this with the data validation tool, but the problem I have run into is that I do not want to store the items in the drop-down list (call or put) anywhere in the excel sheet.
I am trying to get my User Form to work whereby I choose a pre-determined date entry. I have tried some coding but cannot get it to work. What code I need to add in VBA for this to work? I have tried to alter the time entry from my previous post that was solved but are doing something wrong.
View 11 Replies View RelatedI have a row stored in the variable Found_Row3 and I want to set the variable ACRow to all colomns from A to Z of that row. Below is what I have so far...not working
[Code] .....
I need to distribute a list of data into 10 even groups of data. Here is the scenario.
I have 10 salespeople on my team with a list of accounts that need to be evenly distributed based on two criteria
- Each sales person needs to have the same number of zipcodes , with the closest TOTAL # of accounts and TOTAL $ value as possible
i want to hide rows in accordance with the line numbers that have been determined with Macro, on G3 (Start Rows) and H3 (End Rows).
And i have attached my example file on excel (.xls)
I have a source data sheet that has around 50 columns. I want to copy and past selected columns to a destination sheet.
View 1 Replies View RelatedI download a daily inventory file from my supplier.
.
I sell only selected products from that file.
.
I would like to use a list of the product part numbers of the products I sell on sheet 2 (Inventory) and have all the results from sheet 1 (ProductFeed) built into an expandable table on sheet two including all the parts numbers (expandable because I will add or delete part numbers from the list) I have listed and not just one part number but several.
.
Second issue: the download file contains part numbers in column "A" with variables like 418, 418_color, 418_size etc.... I would like all part numbers that begin with the number 418 and the ones that contain the variable added to be listed in the new table so I will get a list of all part number 418 and the variables which include 418 in them.
.
I want to return the results of the whole row(s) of the matched data as well in the new table.
.
I have attached a file of the working data that I have with the data I will use although the ProductFeed will change daily which I intend to copy and paste into the table each day.
The best way to explain my problem is to look at the table below:
How it looks now: ApplePrice 1
Price 2
Price 3FruitDeliciousPearStore 1
Store 2FruitVery DeliciousHow I want it to look:ApplePrice 1FruitDeliciousApplePrice 2FruitDeliciousApplePrice 3FruitDeliciousPearStore 1FruitVery DeliciousPearStore 2FruitVery Delicious
Is it possible to use an IF statement based on Dec 31 - of any given year? If Cell B22 contains Dec 31 (year doesn't matter), I need to subtract 1 day from the date in Cell F2. This only pertains to Dec 31. If any other date of the year is in B22, no calculation should take place.
View 3 Replies View RelatedIs there any way to do an IF statement that is based on the format of another cell. For example
View 3 Replies View RelatedIm trying to put a IF statement together to use the in between function.
I have a table (days) from 1 to 5 ie 21
I have a column of aged purchase orders and im trying to do a IF statement based on the table.
I am looking to modify the formula below. Rather than specify the time "TIME(20,55,0)", I am looking to pull the time from another cell within the spreadsheet.
=IF(B6="","",IF(E7-INT(E7)
I have a data of 10 rows and 6 columns, if i delete the data in column 1, I want the entire row 1 to get deleted and this I want using IF Statement.
View 2 Replies View RelatedI am looking for a way to say
IF A2>9 then B2 returns bronze
IF A2>24 then B2 returns Silver
IF A2> 49 then B2 returns Gold
IF A2>99 then B2 returns Platinum
If I have any value in cell A1 then the cell should show 1 if true or nothing if false. I have managed this via
View 3 Replies View RelatedG5 - can contain True or false
G6 - contains text but the if is on the basis of this cell being "Hand Delivered" or not
I have tried the following to illustrate what I after:
I have a validation list list in column E "Check, Charge, Credit Card, Other". in another column i have what i thought was a straight forward IF statement: =if(E3="Check",9999,"[ ]")
It does not recognize "Check" as the condition. Is there a tweak i can do to get it recognize the data validation.
Is it possible to have a If statement based on the cells text color.
ie
If(color of A2=RED,1,2)
So if Apple text was colored red the result woud be 1
If the Apple text was black the result would be 2
I want to copy a row based on a certain condition. I have 700 rows of data on sheet 1. If Cells in column A contain an X, copy row A# to sheet 2. If there are more than cell that has an X copy all of the rows, naturally. Can this be done with a simple conditional statement, or am I going to need to generate an array, then write that array to sheet 2?
View 4 Replies View RelatedI have created a checklist using "Marlett" checkboxes. I have the names of choices in column B the Checkboxes in column C. In another sheet I want to populate only the names of the choices chosen without any of the spaces that a traditional if statement would populate if it was copied down a column.
View 3 Replies View RelatedTwo part question:
1. How do I structure an IF statement based on a specific cell color (e.g. if a cell is yellow, then perform function x)
2. How do I know what color is what? Is there a pantone reference? A color "name" that excel uses?
I'm having a bit of trouble with a macro designed to read the length text in a cell and if it = a certain length then perform an action (in this case Text to column)
Here is a small sample of the data I'm working with:
Tue 02/11/2014
LastBootUpTime
20140211082244.222441+000 <<
Tue 02/11/2014
LastBootUpTime
20140211082244.222441+000 <<
Tue 02/11/2014
LastBootUpTime
20140211082244.222441+000 <<
Tue 02/11/2014
LastBootUpTime
20140211082244.222441+000 <<
Tue 02/11/2014
LastBootUpTime
Tue 02/11/2014
LastBootUpTime
20140211082244.222441+000 <<
*End Sample*
The text length I want it to perform the action on is highlighted with "<<" if the length of text does not meet the required number then I want the statement to skip and move onto the next one.
I have the text to column code already done with relative references however the long text string I want the statement activated on is not always present which means that the pattern (0,3) is not always consistent.
I was trying to use an if statement to produce results based on 2 cells. The number in the 1st cell can be the number 1 to 5, but each number has critera with it. Say the cell is A1 and i enter the number 1. Then i want to check the value of Cell A5, if this is less than 40 then the cell A10 should read 250 and if A5 was over 40 then it should read 285. struggled to get a formula properly to work.
Here are the values for each number: A1 = 1 with cell A5
I am trying to pull certain members loads from our global design force spreadsheet and because of the naming convention we used for our structural members the 2nd to last character is unique to what I am looking for. I am trying to get a simple condition statement that will display the load only if the 2nd to last character of the name of the element is satisfied.
For Example, if "T" is what I am looking for then :
EDT4 will be true and give me the value accordingly
D10T1 Will also be true and return me the value
D10B2 Will not be true
I know how to use the Mid() and right() function, but I need to check the 2nd from the right.