I have an attached spreadsheet, where I have an IF statement within "O8". Bascially, the result in that cell should equal "50", however displays as "0".
I think this might be an excel glitch - as the same formula worked for "M8".
I am trying to count how many entries in a worksheet say "yes" depending on a value in another column - formula is:
=IF('PM Tracker'!$D$3:$D$1000=C15,COUNTIF('PM Tracker'!$V:$V,"Yes"),"None")
Value in cell C15 is equal to "43-11" (week number and year)
This keeps returning "none" as the answer but I know 3 entries satisfy the "yes" criteria in Column V for week 43-11.
How can I get this to read each, (if (and statement) and give the correct answer. And not give me the 1st underlined statement answer in cell D10. If that also equals true.
But if any other cells G11 thru G14 equals OUT. It still will give the 1st statement.
I need the answer to be the only one of them correctly that’s equal true.
I know that the 1st underlined statement = true. Because G15= OUT .....
Is it possible to write an if statement to display a picture if a cell contains a certain value? Ive got if statements nailed, its not a problem with that i have, just the returning of an image, rather than text ar a hyperlink.
Eg, "if cell A1="stadium", to show a picture of a stadium in cell C1"
Trying to assign this cell's value to the correct sheet tab for the current month.
Trying this:
Code:
=IF(MONTH(A3)=5,'[Wholesales 2014.xlsx]May'!$P$1,0),IF(MONTH(A3)=6,'[Wholesales 2014.xlsx]Jun'!$P$1,0)
A3 is todays date. Wholesales 2014.xlsx]May is a seprate sheet for the month of may and so forth for june.
The problem is the p1 value is empty for the Jun sheet so I get an error: #VALUE! (I assume that is why I am getting the error?)
Using:
Code:
=IF(MONTH(A3)=5,'[Wholesales 2014.xlsx]May'!$P$1,0)
By itself works just fine. I need to set this up for future use, though.
look at the attached. In the estimate tab look at the box highlighted in yellow. Then look at the cells in pink (row 70). F70 is selecting the lowest maintenance value from the yellow box but I want C70 to display the hours associated to that value. The correct hours will need to appear according to what value is displayed. (this sounds confusing but look at the formula in F70 and you will hopefully see what im trying to achieve).
View 2 Replies View RelatedI'm trying to create a formula that will added the correct amount in the correct cells, I have create a dunny sheet in trying to achieve this. If Cell B8:B11 = ABS or Dum that any points won should be added to Cell L8:L11 right now its adding it into K8:K11. If Cell B8:B11 = is Blank any player points should be added to cells K8:K11. I'm using this formula throughout cells K8:K28 =IF(J8>J25,1,IF(AND(J8<>0,J8=J25),0.5,0)) Any thing in red is incorrect anything in blue is what I'm trying to achieve.
View 4 Replies View RelatedWe receive about 20 sales files of several hundred lines of data each day from various agencies. I want to create a macro / VBA code which checks that the data submitted is correct so that we can upload it into our database without import errors and / or having to manually check each line of data.
I envisage something like an output report:
#####################
149 entries
Column A - Date - OK
Column B - Customer_Phone - Errors (Should be 11 digits)
Row 21 - Customer_Phone - Error (Not 11 digits)
Row 108 - Customer_Phone - Error (Contains letters)
Column C - Outcome - OK
Please correct and re-check.
#####################
I have a table with 3 columns of dates and then a column with Set # that I
feel in the box #.
I need to see how many items processed for each set per day.
Example:
[url]
The problem is that it counts the correct amount but not with the correct
dates.
The formula that I use is:
=SUMPRODUCT(--($I$3:$I$8<>"")*(($C$3:$C$8=39601)+AND($E$3:$E$8=39601)+AND($G$3:$G$8=39601)))
Is It Possible to use VBA Coding to Display An Image (Object),
And Un-Display or Remove that Same Image (Object) using a VBA Code?
Example:
I have a Mailbox Picture that I would Like to Show, but only when a cell's
value = 5. If the Cell's Value is not 5, then don't display the mailbox.
I am currently using an Intersect statement in a worksheet module to perform two things:
1. Insert a time stamp into row 2 when row 1 has a price inserted
2.To clear that time stamp if the price is deleted at some later date.
My problem is with the time stamp value being deleted by the user.
If I try to clear the price (now that the time cell =empty) I get a Runtime error 91 - Object Variable or With block variable not set.
I would like to convert this code to a select case statement but I'm not sure how to do this in this situation. Would error coding be appropriate in this instance?
I'm trying to set up an if statement that will recognize that if a cell is FHR it will do something...but if it's PHR it will do something else. I think I found the place where I keep getting an error but I'm not sure how to go about fixing the issue.
View 2 Replies View RelatedI am attempting to use a previously Set variable as part of the next Set statement, pretty unsuccessfully at present.
My purpose is trying to look up
Code:
tb_SelJobID.Value
from a userform in Col Z then look across the row to Cols D,I,N,S & W (different types of work) to see if
Code:
TbSelYr.Value
matches the year selected then insert a formula in the row to the left. Then loop down to the FinalRow.
Currently my Set Found1 statement does not recognise my Found10 value. I know it will be my syntax as it always is. I have cut down the following code to display where the problem areas are, Found1 thru 5.
Code:
Sub CmdGo3_Click()
Dim Row As Range
Dim FinalRow As Long
Dim Found1, Found2, Found3, Found4, Found5, Found10 As Range
Application.ScreenUpdating = False
[code]....
Windows 7 with Excel 2010
I have an Excel Sheet which I use as Database. The database has 11 columns and I insert data with the following function:
Code:
Sub testInsert()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim i As Integer
Dim strTest As String
strTest = "test"
[Code] .......
Now I want to retrieve this data. i.e. I want all F1 where F2 and F3 are 0 AND I want them ordered descending. I'm trying to achieve this with:
Code:
Sub testSelect()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim mrs As New ADODB.Recordset
Dim strTest As String
strTest = "test"
[Code] ....
The result I am getting looks like this:
9
8
7
6
5
4
3
2
15
14
13
12
11
10
1
I assume, that the data is interpreted as String instead of an integer. But I explicitely stated the data as Integer when storing the data into the DB.
I have created a very long switch statement, which is too long to be placed in one row in VBA. I have attempted to put a space and underscore at the end of one line and continue the statement on the row below by placing a comma at the start of the second line. VBA will accept my efforts, but when I run the statement in the immediate window, the following error appears.
"Invalid procedure call or argument"
I understand that there are certain rules where I can split a switch statement onto two lines, yet I do not know what they may be.
trying to write a formula in a VB to some cells:
View 3 Replies View RelatedI want to add some to a macro have which asks before performing the rest of the macro... "Are all details correct?" with a yes and no button. yes, carries on with the macro and no ends the macro.
View 2 Replies View RelatedI have tried different formula involving with decimal places.
If A1 has a whole number like 5141234 then the result would come out as a whole number =(A1-5148000)*1.000440935+48000
If A1 has three decimal places like 5142356.654 then the result would out as three decimal places
I use a lot of VLOOKUP formulae in the sheets i put together and, despite both the lookup value and table array being in the same format (usually text format), i often get an #N/A being returned.
Here's the fun part... if i then do something simple like access the lookup value cell (either by double clicking or pressing F2) and then hit return, then the vlookup calculation suddenly returns the correct value.
I'm convinced it's something to do with the way the cells are formatted but can't work out what.
What would be the correct mathematical terminology for the following:
I have a pool of 100 people and I am tracking their hours worked.
I want to present the % of people that fall in to the 3 largest categories
E.G.:
00:00 - 25:00 = 5
25:01 - 50:00 = 10
50:01 - 75:00 = 15
75:01 - 100:00 = 25
100:01 - 125:00 = 15
125:01 - 150:00 = 10
150:01 - 175:00 = 10
175:01 - 200:00 = 20
In this case the largest groups are:
50:01 - 75:00 = 15
75:01 - 100:00 = 25
100:01 - 125:00 = 15
55% fall in to this bracket.
What we are targeting as a business is that the majority of worker fall in to a similar range each month. So the challenge for my team is to increase the % value month on month. the close to 100% the better they are doing.
Equally what in Excel could I use to automate this calculation.
I want to superscript the text with red color. But now only a active cell is change to superscript with red color after running the macro.
View 2 Replies View RelatedLooking for some help to figure out what is causing our problem. My friend has created the attached excel sheet in Excel 2003. The issue is that the a vlookup does not seem to be finding the correct line for the value from the lookup table when it is returned twice.
Let me explain - The details are contained in the attached workbook. There are three sheets in the workbook - NH3Curve, Samples and Qvalue table.
On the Samples sheet, in cell C12 and C13 you can enter varying values. Go across to F12 and F13 and you will see that they both have the value 22.1. This is where the issue occurs - in cells G12 and G13 the lookup value should be the same - but it is not. G12 is actually returning the value for 22.0 not 22.1. (lines 173 and 174 on the Qvalue sheet). We cannot ferret out why this is happening.
Any help would be greatly appreciated. Sometimes when you look at something you can't see the obvious, so I hope it is that simple.
How can I correct this Time formula which says in the Tag that it produces a
negative Result and hence displays in cell as ####
=(INDEX($A18:$A33,MATCH(MIN(C18:C33),C18:C33,0)))-(60/1440)
What I am doing is selecting the field in A which equates to the lowest
value in C (C= hourly sales), then I am subtracting 60 mins from the value
selected in A. This in effect will give me my closing Times i.e. find the
cell with Zero Sales then subtract 1 hour to find what must be the closing
time (assuming of course that there is at least ?1 of sales per hour while
open).
My cells in A are formatted as h:mm AM/PM, as is the format in the formula
cell
I have been working on a Spreadsheet for GVWR (Gross Vehicle Weight Ratings). I'm having a problem with the Formulas in Excel, I thought you may know what's going on and why it's not giving me the right data. I'm pretty good with Excel, I've been using it for about 17 years for calculating Tank formulas, etc, but have never run in to this before.
I have three columns to the right of the sheet. One is Stock Vehicle weight of an item____(E) The next column is the Aftermarket weight of the item______ (F) Then the third column (G) is the total weight minus the stock weight using a very simple formula =SUM(E6-F6) gives the correct weight in the third column, but at the end of each area (Topic) i have a Total Weight area in the third column (G), using the formula of =SUM(G6:G26) which should just add up everything in column G, but it doesn’t. I have re-made the spreadsheet three times,
it returns an error when I try to enter it. Is there a brave soul which a good eye for errors that might be able to shine some light on the error. Currently it appears the error centers around the MONTH( ) portions of the function. But each embedded function is able to stand alone and I can't imagine why they won't work together.
View 4 Replies View RelatedI have put together the below macro to take data from an Excel spreadsheet and place in a word documents (using bookmarks.
What should happen is it should open up the correct word template depending on what data is in column E (Servicecode) and fill in the bookmarks with the data from excel.
It all works fine and goes through the loop and saves, inputting the correct data into the bookmarks but after looking at the saved templates and scrolling through using F8 the IF ELSE does not seem to work. It CALLS theBearSSR macro rather than the relevant macro e.g. word in E2 is Cele, the macro should call the CeleSSR macro (which opens the correct template).
I don't think i have declared my DIM Servicecode correctly... I can't seem to figure out how to make the IF ELSE condition look at the Servicecode and then go to the correct sub routine (the difference between them is the template that is opened).
HTML Code:
Sub Celebration()
Dim departuredate As String[code]......
I need identifying correct title and corresponding company name. For this I need a UDF which looks for first occurrence of title having event or marketing or meeting word in data and if found the remove other titles and company names already separated with "/".
Sample Data
Producer, Target BTC@Periscope/Events Manager, Recognition Events@Minneapolis Park & Recreation Board/Event Producer@Events by JLS
Required Result
Events Manager, Recognition Events@Minneapolis Park & Recreation Board
Sample Data 2
Sales Associate@Teavana/Event Assistant@City of Saint Paul
Required Result 2
Event Assistant@City of Saint Paul
Sample Data 3
Sales and Catering Manager@Bunker Hills Golf Course at Town & Country Caterers/Marketing Coordinator@Town & Country Caterers
Required Result 3
Marketing Coordinator@Town & Country Caterers
I have a userform with several fields located in it. For the most part, it looks like a user information form, Name, Date,, stuff like that. There is a field that the user enters some information, and using the afterUpdate function for the field, it searches to see if the value is unique. The problem is that when I tab from that field, if the value is not unique, I want the cursor placed back in that field (textbox). SetFocus doesn't seem to do what I want, unless I am using it incorrectly.
View 9 Replies View RelatedI have a question regarding Do While loops. I'm trying to write a do while loop to search through an array for a particular value and return the row number. This value is in the first column of the array and there are 211 of each value chronologically sorted. So, the first column from top to bottom reads 1,1,1,1..211 times, then 2,2,22,..211 times and so on. For this case, I want to return the first row where a particular value is found.
The loop I wrote is as follows: ....
i've been having for quite some time now. I need to input quantity of items into the existing database that holds all the items names which is sorted by category. Below is a sample of the problem:
Table 1 - Items with quantity that is waiting for input:
Quantity
Product
5
Button A White
7
Ribbon B Blue
8
Thread A Black
10
Cloth A White
3
Button B Blue
4Button C White
9Ribbon A Pink15Button A White
Above is just a part of it, the list goes on to over 200 rows long.
Table 2 - Existing database of all products:
Products
Quantity