How Can I Get This To Read Each, (if (and Statement) And Give The Correct Answer

Nov 26, 2006

How can I get this to read each, (if (and statement) and give the correct answer. And not give me the 1st underlined statement answer in cell D10. If that also equals true.
But if any other cells G11 thru G14 equals OUT. It still will give the 1st statement.
I need the answer to be the only one of them correctly that’s equal true.

I know that the 1st underlined statement = true. Because G15= OUT .....

I created an UserForm that looks for Student Name his/her Conferenece Date through a VLookup.

The following is my code:

Private Sub cmdFind_Click() With frmConference .txtTranslator.Value = Application.WorksheetFunction.VLookup(txtStudentName.Value, Sheets("SPANISH").Range("A2:F113"), 6, 0) .txtDate.Value = Application.WorksheetFunction.VLookup(txtStudentName.Value, Sheets("SPANISH").Range("A2:F113"), 5, 0) .txtTime.Value = Application.WorksheetFunction.VLookup(txtStudentName.Value, Sheets("SPANISH").Range("A2:F113"), 4, 0) End With End Sub

The txtTranslator and txtTime works correctly, however txtDate give me a number '40850' not a Date?

I have the attached worksheet with clients' names in four columns (A-D). The first names and last names must remain separate. I need one additional column that shows whether a full name (first and last) in C and D also appears in A and B.

Then one more column that shows how many times the name in C and D shows up, but only if it is also in A and B.

I'm not the best at explaining, but I think that the excel sheet is pretty straight forward.

In Sheet2, cells C3 and D3 are manually entered by the user. I am looking for a formula for B3 that will take the information entered into C3 and D3, find the row in Sheet1 in which column C=Sheet2!C3 and column D=Sheet2!D3, and give the unique corresponding result from Sheet 1 for that row in column B .

So, for example, if C3=A and D3=102, then the result would be 444 if C3=A and D3=104, then the result would be 111 if C3=B and D3=102, then the result would be 111

The combination of C3 and D3 is always unique and will never have more than one possible result in column B of Sheet1.

I have been struggling with this formula for ages and have finally given up. What I would like to do is to do a lookup on the concatenated values of Province, Department and Initiative No, which has mutiple values in the status of milestone column, and then give the answer based on a condition.

The condition for this example should be, that if the returned status / or statuses of the initiative is all 1, then the value should be 1, if it's all 2, then the value should be 2, and so on.....but if the values returned from the status of the initiative is a combination of 1,2 or 3, then it should give me the answer 2. If 4 is part of the comination of values returned, then the value should be 4.

Zero - 0 should be excluded from the formula as it is part of planned values and not actual.

I am trying to created a spreadsheet for work where I have created to validation drop down boxes, one each box has been selected i want it to return back with the correct answer in the 3rd column.

below are the 3 colums. i have created a validation for column 1 and 2 but when selected i want the final box to = column 3 ie. >=9, =2

I have a workbook with calculations for a sale less the assorted fees and at the end giving the final amount from a sale.

I have noticed that some of the rows are not giving the correct amount in them. In other words the addition of some columns in that row are not adding up correctly. It is only off by 1 cent (either over or under), but I can't figure out why.

I have the feeling that I am going to want to kick myself when someone explains this to me (I just know that I know the answer but for the life of me I can't right now).

I have 2 worksheets (worksheet 2 is Slicing and Worksheet 1 is Production).

Production worksheet D6 has a dropdown box for, 1, 2, 3, 4, 5, 6, 7, 1.1, 2.2, 3.3, 4.4, 5.5, 6.6 and 7.7.

In the Production worksheet, I have in cell E6 =IF(D6=1,"ONE",IF(D6=2,"TWO",IF(D6=3,"THREE",IF(D6=4,"FOUR",IF(D6=5,"FIVE",IF(D6=6,"SIX",IF(D6=7,"SEVEN")))))))

In the Production worksheet, I have in cell F6 =IF(D6=1.1,"ONE",IF(D6=2.2,"TWO",IF(D6=3.3,"THREE",IF(D6=4.4,"FOUR",IF(D6=5.5,"FIVE",IF(D6=6.6,"SIX",IF(D6=7.7,"SEVEN")))))))

How do I show in Slicing worksheet cell B6, either 'ONE', 'TWO', 'THREE', 'FOUR', 'FIVE', 'SIX', 'SEVEN' as i have the formula =PRODUCTION!E6&PRODUCTION!F6 and the cell shows '

I have a set of 4 multiple choice answers B,C,D,E column "F" lists a # 1-4 which lets you know which column letter (b,c,d,e) the correct answer is in. I want to set up a formula that will copy the contents of the correct answer (based on that # identifier) and copy it into column "A" which is currently blank.

A_________ B Frank Sinatra C Sammy Davis D Dean Martin E Joey Bishop F 3

I want to put "D"'s value 'Dean Martin' in column A - i know it belongs in A because the "3" in column F indicates its the 3rd answer listed i.e Dean Martin. This format would be the same where there are 4 possible answers on the column to the right dictates which answer is correct.

I am trying to put together an IF statement within excel which will give me certain output depending on the particular value within ONE cell.

For example:

If cell L5 has a value between 0 and 1.00 output value 0 If cell L5 has a value between 1.01 and 2.00 output value 20 If cell L5 has a value between 2.01 and 3.00 output value 40 If cell L5 has a value between 3.01 and 4.00 output value 60 If cell L5 has a value between 4.01 and 5.00 output value 80 If cell L5 has a value between 5.01 and 6.00 output value 100

I'm looking to use an if/and statement to give back a true of false but it doesnt seem to be working, I'll give an example, I want excel to search a set of cells to see if its blank and another cell to see whats written there(from a pull down menu) and if both of them are true I conditionally format to go green, otherwise stay white. It works for one cell, condition below:

=AND(Anoop!B3="IIC",NOT(ISBLANK(Anoop!C3)))

but I cant get it to do this =AND(Anoop!B3:13="IIC",NOT(ISBLANK(Anoop!C3)))

i.e search the entire column

I was also wondering if it was possible if it found an "IIC" in B8 how I could get it to check C8, D8 etc..

I have an attached spreadsheet, where I have an IF statement within "O8". Bascially, the result in that cell should equal "50", however displays as "0".

I think this might be an excel glitch - as the same formula worked for "M8".

I have a nested if statement that doesn't give a blank cell when it is evaluated. The cell is general formatted but results in a '0' in the cell instead of a completely blank cell.

If statement is: =IF('Sales info'!B16="",'Sales info'!B6,IF('Sales info'!B6="","",'Sales info'!B16))

I need a statement to look at how many words are in a cell. If there is 4, to return "Stem" to another column, if it's the 5th word or higher then to return the last word in the string.

For Example

Column A.......................................................... .Column B SOME-TEXT-GOES-HERE....................................../...STEM SOME-TEXT-GOES-HERE-SOMEMORETEXT.............../...SOMEMORETEXT SOME-TEXT-GOES-HERE-SOMEMORETEXT-AGAIN...../...AGAIN

I have tried but failed miserably! I though of using a lookup statement but due to the number of variations it would be quite time consuming.

I know the last part is totally wrong (symbols arranged in that manner), but to clarify i would like the date entered in C1 to override the other statements in the fomula to make it read "completed". If no date is entered in C1 then the formula will return either "overdue" or "outstanding" depending on the other dates in A1 and B1.

I'm trying to create a formula that will added the correct amount in the correct cells, I have create a dunny sheet in trying to achieve this. If Cell B8:B11 = ABS or Dum that any points won should be added to Cell L8:L11 right now its adding it into K8:K11. If Cell B8:B11 = is Blank any player points should be added to cells K8:K11. I'm using this formula throughout cells K8:K28 =IF(J8>J25,1,IF(AND(J8<>0,J8=J25),0.5,0)) Any thing in red is incorrect anything in blue is what I'm trying to achieve.

We receive about 20 sales files of several hundred lines of data each day from various agencies. I want to create a macro / VBA code which checks that the data submitted is correct so that we can upload it into our database without import errors and / or having to manually check each line of data.

I envisage something like an output report:

##################### 149 entries Column A - Date - OK Column B - Customer_Phone - Errors (Should be 11 digits) Row 21 - Customer_Phone - Error (Not 11 digits) Row 108 - Customer_Phone - Error (Contains letters) Column C - Outcome - OK Please correct and re-check. #####################

I have a table with 3 columns of dates and then a column with Set # that I feel in the box #.

I need to see how many items processed for each set per day.

Example: [url]

The problem is that it counts the correct amount but not with the correct dates. The formula that I use is: =SUMPRODUCT(--($I$3:$I$8<>"")*(($C$3:$C$8=39601)+AND($E$3:$E$8=39601)+AND($G$3:$G$8=39601)))

I'm trying to open a file on a network drive...but I'm getting the following error message when it opens: "This file may be read-only, or you may be trying to access a read-only location. Or the server the document is stored on may not be responding." Now, the file itself has no rights restrictions and is not read only. It doesn't appear to be locked.

Now, there are other Excel files in the same directory which I could open fine; however, the Excel documents having the above problem all have a little black icon "appears to be a padlock" (image attached) at the bottom left hand side of the Excel file icon. I tried the following:

- Renaming - Converting to a different file format (didn't work, it won't let me) - Opening in notepad...etc doesn't work.

This file is dated back in 2004...do you think it's corrupt? Is there anything i can do to open or recover this?

in the "Order for EMS" and "Order for FEDEX" there have 1 product exist, now the customer need to type the country in the "F35", and the Price of weight will look back to the sheet "EMS Weight" and "FEDEX Weight" but for example, if i type Japan in both sheet, the EMS that one is correct 1kg to Japan is $168 but in FEDEX that one is not correct 1kg to Japan is $169 but now show $342, the formula in "G36" should be correct, what's wrong of my formula????