IF Statement: Use The First Amount In Column P That Is Positive?
My Column P (Payback) has amounts ranging from negative to positive. In one of my calculations, I would like to use the first amount in Column P that is positive.
Depending upon scenario, sometimes this could be P4 other times it might be P17
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Reference Cell & Add Amount If Positive & Subtract Amount If Negative
Im trying to set up an active running inventory sheet where: (A)the progressive daily sheet cells reference back to the corresponding master sheet cells fluctuating the master values, (B) the same progressive daily sheet cells reference back to a cummulative totals-cell based on whether I added or subtracted inventory. I want to make a copy of the blank "sheet 2" with all of the formulas and move it to the end of the workbook each day and enter new values which will reference back to the master sheet so that I can click on a date sheet and see an individual day's values or click on the master sheet to see the fluctuating inventory on-hand and the cummulative +/- totals of all days combined. I've got a couple hundred individual cells to reference. I've tried and tried but I can't make it work. Heres what I need to do: I need to reference individual cells from "sheet 2,3,etc" back to a corresponding cell in a master sheet. But I need the values in each cell in "sheet 2,3,ETC" to increase or decrease the corresponding cell values in the master sheet. For example: If the value in the master sheet B5 is 200. Then in sheet 2, I enter +50 in B5, I need the master sheet cell B5 to increase by 50 to 250. I also need a way to decrease the cell value in the master sheet B5 if I enter a negative value -50 in sheet 2 B5. I also want to know if I can reference the same cell values entered in "sheet 2,3,etc cell B5" back to totals columns C5 for adding inventory or D5 for subtracting inventory in the master sheet where the master totals columns would reflect cummulative totals added or subtracted. For example: if the value in sheet 2 B5 is +50, then the value in Master sheet C5 would add 50 to a progressive total. But if the value in sheet 2 B5 is -50 then the value in master sheet D5 would add -50 to a progressive total.
View Replies!
View Related
If Statement To Accumulate An Amount In A Cell
In a cell I have a description, say "FOOD" then another cell with amount say £2, then in another cell I want it to be looking and if it sees "FOOD" entered, it takes the amount £2 and adds it to a running balance. Cell A1 = Food Cell B1 = £2 Cell H1 = (looks and if Food) adds £2 to cell
View Replies!
View Related
IF Statement- To Remain Blank Until An Amount Is Entered In That Row
Amount Amount Item Total Account $ - No Profit$ 629.50 $ - $ 629.50 No Profit$ 46.29 $ - $ 46.29 No Profit$ 2,333.01 $ 233.30 $ 2,566.31 233.3 $ - No Profit $ - No Profit $ - No Profit $ - No Profit #1 If there is an amount in column B, I want column D to reflect that amount. #2 If there is no amount in column B, I want column D to state the words "No Profit." #3 Already in column B is the formula =C1-A1. I tried =IF(B1=0,"No Profit",B1) but when I copy that formula down the spreadsheet, it inserts "No Profit" into all of column D. I only want "No Profit" to exist when there is a $0 resulting from the formula mentioned in point #3. When there is a blank cell in column D, I want it to remain blank until an amount is entered in that row?
View Replies!
View Related
Return Last Positive Number In Column
I have a column with zeros, positive numbers, and negative numbers. I need to find the last (bottom) positive number in the column. Ex: Column A has - $50 $0 -$10 $22 $0 -$14 I want a formula or function in B1 that would return $22. However if I add a new row under the -$14 which contains $37, the formula should then return $37. I have been googling all night, and I can't make this work.
View Replies!
View Related
Return Column Header Of Last Positive Value In Range
I've got numerical data in columns A through AF, starting in row 4. I need a formula, starting in AG4 that I can drag down. I need the formula to look back across the row until it gets to the last posistive number, then return the column header of that column (the column headers are in row 3) so for example Header row Jan Feb Mar Apr May Jun Jul Aug Data 0 3 0 0 8 0 0 0 the formula would return May in this example as 8 is the las positive value and the column header for that column is 8. There are no blank cells in the data.
View Replies!
View Related
Add Amount In Column
Trying to add a formula in my spreadsheet that will add every amount in column AQ8:AQ200 if the date in AQ8:AQ200 is march. The format for the date is 3-12-09. Here is what I'm trying. =SUMIF(AU8:AU200,MONTH=3,AQ8:AQ200)
View Replies!
View Related
Count The Amount Of Cells In A Column
I am trying to count the amount of cells in a column (Col H) containing data against a certain date which is displayed in another column (Col B) Eg. Col B................-...........Col H 13/06/09.................FIRST LAST 13/06/09................. 13/06/09.................FIRST LAST 20/06/09.................FIRST LAST 20/06/09................. So that in the sheet next to it it would appear: 13/06/09 - 2 20/06/09 - 1 The dates don't appear in row order and the sheet has a filter on it so I am unable to select the Col H and just use COUNTA
View Replies!
View Related
IF Priority Value Changes Then Move $ Amount To A Different Column
If the value in Column H changes then move the value from it's original location which would be either in J, K or L from there to the column corresponding with the value in H (reference 1=J, 2=K, 3=L). So, in the file, if H3 were to be changed to Priority 3 then I want the value to move from J3 to L3 and if it were to be changed to Priority 2 then I want the value to move from J3 to K3. The formula needs to work on all variations ie priority 2 changing to 1 or 3 for the whole sheet. There is conditional formatting - would be nice to keep it but no big deal.
View Replies!
View Related
Autoshape Resizes According To Amount Of Data In Column
I type in a "O" into the little grid I made and then the locations are placed into cells A34, A35, A36 and so on. The arrow I placed into column B. It works if I manually enter anything into A34,A35,A36 and it stays with the data. If I let the grid automatically populate A34, A35 and so on, it will not grow as the cells in A34, A35 are automatically populated. How can I make it do that one little thing? Sorry if I am confusing.
View Replies!
View Related
Formula To Add Amount Of Rows In A Column
I know a bit about excel nut not a hugh amount! i need to know a formula that adds the number of rows used in a column. Does that make sense?? ok NAME rob dave jim darren adam lee i need a formula that will tell me there is 6 rows used in that column (not including the title).
View Replies!
View Related
How To Add Values For Amount That Are Higher Than Same Row In Another Column
I have two columns (let's say column A and C), i would like to add the values in column A only if they are higher than the ones in Column C in the same row... how could i do that? The sheet looks something like this, i would like to add the values in the first column only if they are higher than the ones in the third column and then of course get the sum of them... i would also like to know how many were there in total, but i guess i could do that with a count formula i just need the parameters $ 67,100.00 $ 110,000.00 $ 165,100.00 $ 146,034.00 $ 239,400.00 $ 220,100.00 $ 90,184.69 $ 147,843.75 $ 168,500.00 $ 51,011.25 $ 83,625.00 $ 95,100.00 $ 89,860.32 $ 147,312.00 $ 198,200.00 $ 159,121.36 $ 260,854.69 $ 26,000.00 $ 129,941.44 $ 213,018.75 $ 235,700.00 $ 88,869.38 $ 145,687.50 $ 95,600.00 $ 27,772.54 $ 45,528.75 $ 43,000.00
View Replies!
View Related
IF Statement Within A COUNTIF Statement: Cell In Sheet "Summary" Count The Number Of Cells In Column DX Of Sheet "Analyses" That Are Greater Than 0
I am trying to have a cell in sheet "Summary" count the number of cells in column DX of sheet "Analyses" that are greater than 0, provided that the value in column A of "Analyses" corresponds with the value in B8 of sheet "Summary." (In "Analyses," there are 106 subjects, each taking up 64 rows. So, columns 1-64 correspond to Subject 1, columns 65-128 correspond to subject 2, etc. In column DX, each subject has 64 values that are either 0 or greater than 0. In "Summary," each subject has one row that summarizes the 64 trials. I want a single cell in the "Summary," sheet to reflect the number of times each subject produces a value greater than 0 in column DX of "Analyses.") I tried using this formula, but it did not work correctly: =COUNTIF(IF(Analyses!$A$1:$A$10000=Summary!B8,Analyses!$DX$1:$DX$10000,""),">0") (Summary!B8 = 1, so I am trying to calculate the number of values in DX that are greater than 0 only for subject 1.) When I press enter, this yields a value of 384. This is impossible, given that subject 1 only has 64 possibilities of yielding a value greater than 0. Subject 1 has 2 values in column DX that are greater than 0. I tried making this an array formula by pressing Shift+Ctrl+Enter, and that just gives me a #VALUE! error.
View Replies!
View Related
If Statement Limit Workarounds: Convert Various Codes From One Column Of Spreadsheet Into Different Codes In Another Column
I'm trying to convert various codes from one column of an excel spreadsheet into different codes in another column. I was able to accomplish this with "If" statements, however I'm only able to string together seven of these statements in one command. Is there a better way to add formulas for more than seven conversions? Below is a copy of what I've done so far with the seven converts: =IF(ISNUMBER(SEARCH("WARN",J2)),"Warning",IF(ISNUMBER(SEARCH("PSSNAP",N2)),"Sales",IF(ISNUMBER(SEARCH("WARN",L2)),"Warning",IF(ISNUMBER(SEARCH("2699",L2)),"Warning",IF(ISNUMBER(SEARCH("4004",L2)),"Warning",IF(ISNUMBER(SEARCH("2036",L2)),"Warning","")))))) I want to add about 15 more codes to convert within this formula but it's maxed out in the format I'm using.
View Replies!
View Related
If Statement Return Conditionally Value In Other Column
In column D I have an Expiry Date and in column E I put formula “=IF(D2<=TODAY()+90,"we have less than 90 days!!!","we have more than 90 days")” the formula works fine but my problem is I need formula if item have expired in column D its have to say in column E “ ITEM EXPIRED “ or something. I highlighted line in yellow below attached sheet.
View Replies!
View Related
IF Statement: Change The Cell In Column
I have a Piece of code that works when a cell changes its value. I want to try and get it to work when only cells in coloumn B change. I thought the best way would be with using an IF statement but i am unsure on the code to write and get it to work. This is the code that i have at the moment.
View Replies!
View Related
IF Exists Statement: Address From Column One
I have a 3 column table, the first column is always populated with email addresses, the second column will have secondary email addresses if that person has one, I want a formula in the third column to have the secondary email address if it exists, if it doesn't I want it to have the address from column one.
View Replies!
View Related
If Statement To Long, Drag It Down To The Rest Of The Column
I am trying to write the following statement in a cell in excel lets say O3 so I can drag it down to the rest of the column, I was trying to see if there was a previous posting about this but I didn't find it. the if statement goes like this: =IF(M3=Sheet3!$B$2,Sheet3!$C$2,IF(Sheet1!M3=Sheet3!$B$3,Sheet3!$C$3,IF(M3=Sheet3!$B$3,Sheet3!$C$3,....until it reaches to if(Sheet3!$B$20,Sheet3!$C$20,"PENDING")) Is there a way I can do this I know probably through a VBA but I have no idea how to set it up.
View Replies!
View Related
If Statement/indexing: Column To Adjust Based On The Date Of The Transaction/trip
I have an employee expense voucher with a column that calculates mileage. I also have a column that lists what the mileage rate is. I'd like for that column to adjust based on the date of the transaction/trip. Here's an example. Trip between 7/1/08 - 12/31/08 = .585 mileage. Trip between 1/1/09 - 12/31/09 = .405 mileage. If someone turns in a receipt for a trip taken on 11/13/08, I want the form to adjust the mileage rate to .585. Wasn't sure if this is an indexing kind of thing, or if there's an if statement I could use.
View Replies!
View Related
Utilize A Select Case Statement In Target Intersect Statement
I am currently using an Intersect statement in a worksheet module to perform two things: 1. Insert a time stamp into row 2 when row 1 has a price inserted 2.To clear that time stamp if the price is deleted at some later date. My problem is with the time stamp value being deleted by the user. If I try to clear the price (now that the time cell =empty) I get a Runtime error 91 - Object Variable or With block variable not set. I would like to convert this code to a select case statement but I'm not sure how to do this in this situation. Would error coding be appropriate in this instance?
View Replies!
View Related
IF Statement, MAX Statement, And Return A Value
Each row represents a call. If a call in column A equals "CW" and it has the highest duration (H:MM:SS) value in column B, then provide me the date (MM/DD/YYYY) for that call that is stated in column C. i.e. Column A --- Column B ---- Column C AB ------------ 0:02:22 ----- 04/14/2007 CW ----------- 0:03:13 ----- 04/16/2007 CW ----------- 0:01:42 ----- 04/13/2007 Thus, the value that should be returned is "04/16/2007".
View Replies!
View Related
If Statement Contained Into A Sum Statement
I have a problem with a formula inserted with control+shift+enter The formula is MEAN(IF(' VALIDATION'!$G$2:$G$59999=D30;'VALIDATION'!$E$2:$E$59999)) In the Validation sheet I have the column G with values 0 and 1, and another column E with numeric values. Changing the value of cell D30, the formula will calculate the mean of the values in column E that have a value equal to D30 in column G. The problem is that this function works when D30=1 and not when d30=0, in this case the formula returns N/D. I have tried using also text values instead of 1 and the formula works . The problem is only when D30 is 0
View Replies!
View Related
Minimum Positive Value
in a column let'e say A I have the following values Total 11 20 7 -10 30 -5 -25 16 3 21 -8 I whant to have a variable = the row number with the minimum positive value which is in this case row number 9 and the column value 3
View Replies!
View Related
Absolute (positive) Value
I was wondering how I can replicate Excel's function abs(), which simply gives an absolute value of some number. Is there a simpler way to do that rather than creating a loop to test a condition? For example, I have a line: w_1 = Range("E2").Value / Range("E3").Value w_1 can be either positive or negative depending on the sign of E2 and E3. But I need w_1 to be always positive, no matter what signs E2 and E3 have. I tried w_1=WorksheetFunction.Abs(Range("E2").Value / Range("E3").Value)
View Replies!
View Related
Subtract But With Positive Sum
Im working on a time schedule form for my work. It all works good but it have one little error. Lets say it looks like this cell a1 has start time 22:00 and a2 has a end time 07:00. i know that i can switch the cells in the formula =sum((a1-a2)*24). like this i´ll get a negativ answer and that f.cks up the totalt becuse of the negativ answer i get. is there a way to get 7:00 - 22:00 and 22:00 - 7:00 to calculate as positiv with one formula?
View Replies!
View Related
Matching Negative Value W/ Corresponding Positive Value
I have a spreadsheet of invoices and credits memos (500+ rows). Is there a way to match the positive and negatives that match? For example if there is -40.39 in one cell and positive 40.39 in another that it could highlight both those cells. I was thinking to do it in conditional formatting however I can not get it to work. It does not have to be fancy I just need to highlight them because there will not be a lot that do actually match.
View Replies!
View Related
Convert Positive # To Negative
Is there a simple way to convert a positive number to a negative number ? Fromto 10(10.00) 56(56.00) 116(116.00) Additionally, would the same procedure work for time? So if I had a column listing hours that looks like this: 10:05:00 4:34:00 2:18:06 is there a way to convert this to negative hours? Understandably, there are no such thing as negative hours, but I am trying to illustrate a situation where an internal procedure was completed x amount of hours before the specified start time.
View Replies!
View Related
Minimun Of Positive Values
I want cell D5 to be the minimum value of cells D29:T29. Some of the cells will have no value (or $0.00) and some will have values in them. I tried the following formula in cell D5 but it doesn't work: =IF(D29:T29>0,MIN(D29:T29))).
View Replies!
View Related
Adding Positive Numbers Only
I'm looking for a formula that would add only positive numbers located in the same row and in 5 different cells. These cells may contain negative numbers at times. The total after adding the 5 cells are to be displayed in a different worksheet.
View Replies!
View Related
Positive Cells Taking A Zero Value
I have a code below to only allow a number to be entered into one of 2 cells. I'm trying to do conditional formatting based on these to cells, and the evidence is showing that even when I type a value into either I21 or I22, they are taking on a value of zero. I have conditional formatting stating that if I21>0, then do one thing. And in a separate cell, I have =I22>0, then do another thing. Neither works, and even using =I22<>0, then do formatting, and it doesn't work, telling me that the assumed value is always zero.
View Replies!
View Related
Returning Positive Number Regardless
i have a list of numbers in column A and B and in column C is = B - A. But what i want is for Column C to always = positive number regardless even if say A = 10 and B = 8 the true answer is -2 but i would like the reading of 2. Is there a way to say B - A and if = - make it -( ) ? (otherwords +)
View Replies!
View Related
Ensure A Negative Or Positive Value
My form has a combobox with three options "Withdrawal" "Deposit" "Fee". I want to make sure that whatever number a user puts into a textbox, if they select "Withdrawal" or "Fee" that number will be converted to a negative number, and if they select "Deposit" it will be positive. I have written the following code and am just wondering if there is some super slick way of doing it other than an if statement.
View Replies!
View Related
|
TRACKER
