In a cell I have a description, say "FOOD" then another cell with amount say £2, then in another cell I want it to be looking and if it sees "FOOD" entered, it takes the amount £2 and adds it to a running balance.
Cell A1 = Food
Cell B1 = £2
Cell H1 = (looks and if Food) adds £2 to cell
I will try explain what I want to calculate but cannot find the way. I want to calculate a result from two digits, then remember the result and add to this sum next digit typing in the same cell. Example:
colum A names
colum B numbers
In cell B1 I will write 5, after enter result in B1 is 5.
In cell B1 again write 7 result in B1 is 12.
In cell B1 again write 6 result in B1 is 18....and so on.
I need a formula or script that accumulates data that a person enters into a particular cell.
[INPUT] a6=enter service requests closed today
[OUTPUT] b6=Service requests closed last month
[OUTPUT] c6=Service requests closed this month
I want to make this as simple as possible and the person enters her data in the same cell every day (a6). The script or formula should (in the background) then take todays total and and add it to the accumulated total and show the outputs in b6 and c6.
If a person enters data multiple times on any given day, the script or formula should recognize only the last entered number for that day. This will control user errors in entering.
I thought about just entering the raw data in a separate spreadseet and using 1 cell for each day, but then a person would have to enter totals on one sheet and look at the results on another seet. not good
I also thought about taking the above solution and combining them on one sheet. this would work, I guess, but I really need a sleek lean sheet that they add to the same cell each day.Also there is additional data that I still need to show on the screen and I really hope I do not need to move this data.
My Column P (Payback) has amounts ranging from negative to positive. In one of my calculations, I would like to use the first amount in Column P that is positive.
Depending upon scenario, sometimes this could be P4 other times it might be P17
Amount Amount Item Total Account
$ -
No Profit$ 629.50 $ - $ 629.50 No Profit$ 46.29 $ - $ 46.29 No Profit$ 2,333.01 $ 233.30 $ 2,566.31 233.3
$ -
No Profit
$ -
No Profit
$ -
No Profit
$ -
No Profit
#1 If there is an amount in column B, I want column D to reflect that amount.
#2 If there is no amount in column B, I want column D to state the words "No Profit."
#3 Already in column B is the formula =C1-A1.
I tried =IF(B1=0,"No Profit",B1) but when I copy that formula down the spreadsheet, it inserts "No Profit" into all of column D. I only want "No Profit" to exist when there is a $0 resulting from the formula mentioned in point #3. When there is a blank cell in column D, I want it to remain blank until an amount is entered in that row?
Im trying to set up an active running inventory sheet where: (A)the progressive daily sheet cells reference back to the corresponding master sheet cells fluctuating the master values, (B) the same progressive daily sheet cells reference back to a cummulative totals-cell based on whether I added or subtracted inventory. I want to make a copy of the blank "sheet 2" with all of the formulas and move it to the end of the workbook each day and enter new values which will reference back to the master sheet so that I can click on a date sheet and see an individual day's values or click on the master sheet to see the fluctuating inventory on-hand and the cummulative +/- totals of all days combined. I've got a couple hundred individual cells to reference. I've tried and tried but I can't make it work. Heres what I need to do:
I need to reference individual cells from "sheet 2,3,etc" back to a corresponding cell in a master sheet. But I need the values in each cell in "sheet 2,3,ETC" to increase or decrease the corresponding cell values in the master sheet. For example: If the value in the master sheet B5 is 200. Then in sheet 2, I enter +50 in B5, I need the master sheet cell B5 to increase by 50 to 250. I also need a way to decrease the cell value in the master sheet B5 if I enter a negative value -50 in sheet 2 B5. I also want to know if I can reference the same cell values entered in "sheet 2,3,etc cell B5" back to totals columns C5 for adding inventory or D5 for subtracting inventory in the master sheet where the master totals columns would reflect cummulative totals added or subtracted. For example: if the value in sheet 2 B5 is +50, then the value in Master sheet C5 would add 50 to a progressive total. But if the value in sheet 2 B5 is -50 then the value in master sheet D5 would add -50 to a progressive total.
I have a cell (B10) that has an IP address in it. I want cell B11 to automatically reflect the same first 3 octets of B10, but the last octet accumulated by +1.
Example: 172.23.0.128 would be in B10. I would like to have a formula in B11 to increment B10 by +1 to show 172.23.0.129.
I am trying to set up a budget spreadsheet for a friend. The sheet will have the usual incoming and outgoings with a surplus at the end of each month. This surplus needs to be accumulated each month in a particular Account (Cell).
Once the amount in this cell reaches £5000 any surplus accumulated each month from that point needs to be deposited in another account (Cell).
I am trying to subtract an amount from a cell until it reaches 0, then move and subtract from the next amount, and so on.
AmountFixed BudgetedResult53.50Subtracted 5 tell it hit zero1.30Subtracted remaining amount until zero43.8Subtracted remaining amount until zero3.8 was left over without hitting zero is good. Is there formula for this?
My problem is that I have a worksheet tab (RawTimeSheetData) which contains a whole series of week/timecode values for a range of people.
I want to accumulate the hours for an invoice period / job code combination. As an example in the tab InvoicePeriodSummaryTimes cell D6 i want to sum all the hours from RawTimeSheetData where both cells A6 & B6 from InvoicePeriod tab = cells D6 & E6 from the rawdata tab.
I need a formula to calculate the amount due based on cumulative sales once a breakpoint amount is reached.
Example:
Breakpoint:
cum sales are > 500 pay at 3%
cum sales are >1,000 pay at 2%
month/ sales/ cumul sales/ amount due
jan/ 100.00/ 100.00/ 0
feb/ 600.00/ 700.00/ 6.00
mar/ 600.00/ 1,300.00/ 18.00
and so on...until the end of year.
I tried using an if formula by could not get it to work.
For the below macro.
ABCDG
CodeTotalBaseNetA1 = 20%
A110083.3316.67A2 = 10%
A2350318.1831.82A3 = 7%
A3220205.6114.39A0 = 20%
A015015030
A1 is the code, take the total(B) and calculate the base(C) on the percentage given in the G, net = B-C. for A2 and A3 it is the same process.
For A0 the total (B) is equal to Base(C) and calculate the net on the given percentage in G.
I'm trying to set up an if statement that will recognize that if a cell is FHR it will do something...but if it's PHR it will do something else. I think I found the place where I keep getting an error but I'm not sure how to go about fixing the issue.
View 2 Replies View RelatedOk, basically C3 is a dollar amount. The default total for C3 is $0.00. If C3 is $0.00 then this formula cell will display a blank cell. If there is any other amount in C3 then the formula C3-C2 will run.
I tried this but it's not working:
=IF(C3="0","",C3-C2)
If a cell is not blank, then increase that amount by a percentage identified in another cell and display the value only without any formalas in a new cell. To this end I wrote this IF statement:
=IF(I2>0,CP9=(CA9*I2/100)+CA9,CP9="")
Observation: I see a FALSE in CS9 where this IF statement exists, however, CP9 does not display the required value.
is possible to have a cell's text color change if the value of the cell is greater than a certain amount. For example, if the cell is $200 or more the text would change to red.
View 3 Replies View RelatedAttached is an example. Office 2007 & 97 versions attached. If a drop down menu on one sheet selects a certain word, then on another sheet based on that selection a dollar amount is entered. I am guessing this would involve some if commands, I am really weak on making those.
View 2 Replies View RelatedI just need a warning box that indicates a user has entered a cell value under 200. Here's what I have but it's not working.
View 2 Replies View Relatedfigure out the amount of days in a cell.
I have dates in "A"
and need the amount of days to show up in "C"
EX:
A B C
11/24/12
12/13/12 18
So i need the code to have the "18" show up when I enter the date in "A"
I need a formula that will give a zero amount if cell C14 is blank AND add cells C14 & C13 if cell C14 & C13 are not blank AND add Cells C14 & C12 if Cell C13 is blank but cell C14 is not.
I tried this formula but it will not work: ....
Is there a way of limiting the amount of characters you can enter in each cell?
Also is there a way to apply this to an existing sheet that has cells with more characters in it than I would like? ie. If an existing cell has 25 characters in it, could i cut it down to the first 10?
I have a row that is a percent of sales with this:
=(F4*0.2+G4*0.1)*I4
"I4 will either be 1.0 or 0.5"
Now I want to have it so if this equation equals less than 100 with I4 being 1.0 to equal 100 OR if I4 is .5 then it should be 50. I have looked all around and I am no excel wizard so this is troubling me significantly.
To put this simply, I have a spreadsheet that has 2 columns on it with multiple names and numbers on it. We'll say ABC and 123 as the example name and number. When I type in ABC and 123, I have it where it appears on the next page.
The question is that if I want to duplicate it onto the next page, how do I do it? In other words, I want to create a 3rd column with which to add a number of times I want the numbers and letters to appear. For example, I write| ABC | 123 | 5 | and ABC appears on the next page at a certain start point and is copied 5 times in certain cells. The same happens for 123 at its own start point.
I have a spreadsheet where column E needs to be filled with an amount depending on whether another cell in column F has either a + or - sign.
For example:
F2 has "+ ACH PreAuthorized", G2 has "322.1". I would like to have cell E2 fill in the amount "+322.1". So in cell E2, if F2 has a plus sign, then put in the amount in E2. If it has a - sign, put in the amount from G2 into E2 but put a - sign in front of the amount. If there is no sign at all, put a zero or leave blank.
function that add to any cell that doesn't reach the disired amount.
If the required number is 14 and a calculated cell comes up with 13 or less; I need a funtion to take that number and add a penalty number to it.
For example: For arguements sake the penalty is $150.00. Suppose cell 1A has 5 and cell 1B has 5; cell 1C adds them for a total of 10. I need cell 1D to realize that the number in 1C did not equate to atleast 14 and therfore 1D should show $150.00 and for every cell selected that falls short of 14 should add an additional $150.00 to 1D.
I'm decently competent at VBA but no real experience with userforms. I have a very simple 3x2 table:
Type $Amount
Cash $xxxxxx
Product A $yyyyyy
Product B $zzzzzz
I want a simple userform that moves money between the products, ie the user selects a money amount in the form (ex: $1000) and that amount is added from one product and simultaneously subtracted from the other. Note that the amount selected would be subtracted from one product's current balance and added to the existing balance of another product. No new money is coming into the system.
I have a row A through N. In cell A1, have a dollar amount. In cells C1 through N1, I have different dollar amounts. In cell O1, I want to have a formula that will take the dollar figure in A1 and subtract from that amount the total of all the amounts in cells C1 thorugh N1. But I don't know how to write that formula.
Let's say I've got $100 in A1, and then in C1 through N1, I have $2, $3, $4, etc. for a total amount of $94 in cells C1 through N1. I'd like to have a formula in O1 that would show $6.
How to write up that formula in cell O1.
Col A contains SS#'s and Col B contains names. Quite often there are duplicates and sometimes triplicates because they may be sending payments for multiple providers. We charge one fee per client (unique SS#), regardless of the number of times they may be on the spreadsheet.
I can get a grand total by summing the unique items by using this formula:
=SUM(IF(LEN(A2:A4970),1/COUNTIF(A2:A4970,A2:A4970)))
and then doing a CTRL-SHIFT-ENTER to put brackets around it so it will "take."
However I now need to show the fee by each unique name. Right now I am inserting Col C, typing in 3.00 into C2 and copying on down, but then have to manually remove the amounts in the rows which contain duplicate ss#. Long painful process. How can I put a formula in Col c so that it will only show fee one time by the first unique ss#?
I want to link a number of cells on one worksheet back to another worksheet within the same workbook. Say everything from Cells A1 to M90.
I find the fastest way to do this link A1 on second worksheet to A1 on first worksheet (by using = and click on worksheet 1 Cell A1).
I then click on cell A1 on worksheet 2, grab small square in bottom right hand side of cell, and drag accross to M1.
While A1 TO M1 is still highlighted, I then grab small square on bottom of cell M1 and drag down to M90.
This makes all cells within this range reference back to worksheet1. In advanced settings I have unchecked for all blank cells to show a zero in woksheet 2.
Therefore I now have what I currently want, although I would like to make all reference absolute?
I tried doing this from the beginning again making A1 absolute at the start, but dragging the cells across and down does not provide the info I am looking for in all cells?
I need a cell to restrict the input:
-Only numbers are allowed.
-No date posible.
-Any amount of decimals (they must all be shown in the cell).
I tried using the data validation and using the IsNumber() to restrict any non numeral input. The problem with this approach is that if the user enters a date; it apprears as a date format (eg: "5.May"). I'm using an european excel, where the decimal separator is a comma instead of a point; so if a user accidentaly types "5.5" instead of "5,5"; the cell will show "5.May".
I also tried the cell format/number/number format. The problem in here is that I dont know how many decimal positions will the input number have; and I need them all to be shown.