How To Add Values For Amount That Are Higher Than Same Row In Another Column
I have two columns (let's say column A and C), i would like to add the values in column A only if they are higher than the ones in Column C in the same row... how could i do that?
The sheet looks something like this, i would like to add the values in the first column only if they are higher than the ones in the third column and then of course get the sum of them... i would also like to know how many were there in total, but i guess i could do that with a count formula i just need the parameters
$ 67,100.00 $ 110,000.00 $ 165,100.00 $ 146,034.00 $ 239,400.00 $ 220,100.00 $ 90,184.69 $ 147,843.75 $ 168,500.00 $ 51,011.25 $ 83,625.00 $ 95,100.00 $ 89,860.32 $ 147,312.00 $ 198,200.00 $ 159,121.36 $ 260,854.69 $ 26,000.00 $ 129,941.44 $ 213,018.75 $ 235,700.00 $ 88,869.38 $ 145,687.50 $ 95,600.00 $ 27,772.54 $ 45,528.75 $ 43,000.00
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Add Amount In Column
Trying to add a formula in my spreadsheet that will add every amount in column AQ8:AQ200 if the date in AQ8:AQ200 is march. The format for the date is 3-12-09. Here is what I'm trying. =SUMIF(AU8:AU200,MONTH=3,AQ8:AQ200)
View Replies!
View Related
Formula To Add Amount Of Rows In A Column
I know a bit about excel nut not a hugh amount! i need to know a formula that adds the number of rows used in a column. Does that make sense?? ok NAME rob dave jim darren adam lee i need a formula that will tell me there is 6 rows used in that column (not including the title).
View Replies!
View Related
Reference Cell & Add Amount If Positive & Subtract Amount If Negative
Im trying to set up an active running inventory sheet where: (A)the progressive daily sheet cells reference back to the corresponding master sheet cells fluctuating the master values, (B) the same progressive daily sheet cells reference back to a cummulative totals-cell based on whether I added or subtracted inventory. I want to make a copy of the blank "sheet 2" with all of the formulas and move it to the end of the workbook each day and enter new values which will reference back to the master sheet so that I can click on a date sheet and see an individual day's values or click on the master sheet to see the fluctuating inventory on-hand and the cummulative +/- totals of all days combined. I've got a couple hundred individual cells to reference. I've tried and tried but I can't make it work. Heres what I need to do: I need to reference individual cells from "sheet 2,3,etc" back to a corresponding cell in a master sheet. But I need the values in each cell in "sheet 2,3,ETC" to increase or decrease the corresponding cell values in the master sheet. For example: If the value in the master sheet B5 is 200. Then in sheet 2, I enter +50 in B5, I need the master sheet cell B5 to increase by 50 to 250. I also need a way to decrease the cell value in the master sheet B5 if I enter a negative value -50 in sheet 2 B5. I also want to know if I can reference the same cell values entered in "sheet 2,3,etc cell B5" back to totals columns C5 for adding inventory or D5 for subtracting inventory in the master sheet where the master totals columns would reflect cummulative totals added or subtracted. For example: if the value in sheet 2 B5 is +50, then the value in Master sheet C5 would add 50 to a progressive total. But if the value in sheet 2 B5 is -50 then the value in master sheet D5 would add -50 to a progressive total.
View Replies!
View Related
Macro Logic: Extract Higher/lower Values Based On Unique Cell
This is a logic based macro that needs to compare values in 1 column above a specific cell and take action until the column has no more data. Here's what I'm trying to do (and I've also attached a sample of desired results): 1) I want user to input starting cell. So I need to create a button for that. 2) This is where the logic begins and I'm having difficulty. From cell defined in button, I move up one cell in that column and compare that value to the original cell. If the value is greater than original cell then logic needs 2 outcomes: a) move up 1 cell in column and if that value is less than original cell, then extract that value and copy that value one cell to the right or 1c. b) move up 1 cell in column and if that value is greater than original cell, then move up again, until find lesser value than original cell. Once we find value less than original cell, extract value and copy value one cell to the right or 1c.
View Replies!
View Related
Speed Improvement - Macro Extract Higher/lower Values And Note Time Differences
I have a macro that needs a major improvement in performance. I have a Quad Core 2.67GHz single processor computer and with the current logic it calculates 20 values per minute. I have data sets that can be up to 400,000 data points, which means it will take 333 hours. The attached Sample file has over 9000 point. For this data set it takes 7.5 hours. The core logic of the macro is to extract what I call “Break Point” into column M and “Time Difference” between the Break Points to column O. I got the code from this forum (thank you DonkeyOte) and made some modifications. The modified logic does the following: 1) The user inputs the starting cell. In the Sample I use G200. 2) From cell defined in button, It moves down one cell in that column and compares that value to the original cell. If the value is greater than original cell then there are 2 possible outcomes: a) move down 1 cell in column and if that value is less than original cell, then extract that value and copy that value to the column M (Break Point value) and copy the Time Difference Value to column O. “Time Difference” is calculated as the difference between the 2 point breaks in Column A. In this case I’ve hardcoded 0.003472222 to get 5 minutes which matches up with each incremental time in column A, but I would like the Macro to automatically calculate that by the difference between Column A values. b) move down 1 cell in column and if that value is greater than original cell, then move down again, until find lesser value than original cell. Once we find value less than original cell, extract value and copy value to column M and copy the Time Difference Value to column O. Once lesser value has been copied to new cell, logic is now: a) move down 1 cell in column and if that value is greater than original cell, then extract that value and copy that value one cell to column M and copy the Time Difference Value to column O. b) move down 1 cell in column and if that value is less than original cell, then move up again, until find greater value than original cell. Once we find value greater than original cell, extract value and copy value one cell to column M and copy the Time Difference Value to column O. At any point in the process if we find a value equal to the starting cell, we ignore it and the logic continues. The logic continues flip flopping like this to the last value of column G. OR Here's the logic now in reverse I need: If after moving down 1 cell of original cell, the value is less than original cell then logic has the following 2 outcomes: a) move down 1 cell in column and if that value is greater than original cell, then extract that value and copy that value one cell to column M and copy the Time Difference Value to column O.. b) move down 1 cell in column and if that value less than original cell, then move up again, until find greater value than original cell. Once we find value greater than original cell, extract value and copy value one cell to column M and copy the Time Difference Value to column O. Once greater value has been copied to new cell, logic is now: a) move down 1 cell in column and if that value is less than original cell, then extract that value and copy that value one cell to column M and copy the Time Difference Value to column O. b) move down 1 cell in column and if that value is greater than original cell, then move up again, until find lesser value than original cell. Once we find value lesser than original cell, extract value and copy value one cell to column M and copy the Time Difference Value to column O. Again, at any point in the process if we find a value equal to the starting cell, we ignore it and the logic continues. The logic continues flip flopping like this to the last value of column. Once all the Break Points and Time Difference between Break Points are extracted for each value in column G, the AVERAGE, STDEV and MAX values of column O are calculated in column Q, R and S. There is a loop that controls the execution of the core logic until the last value in column G. In the macro I’ve hardcoded last row being 9171, but I’d like the Macro to figure out what the last row is automatically. I know this description is a bit long but I’ve worked for many hours on getting it work properly. I just need some help to make it run much faster. I hope someone can help me out on this. I have the right logic, just need the speed now and I really can’t figure it out. Attached is a sample files demonstrating showing how the logic to flips back and forth as moving down the column starting in cell G200. The sample shows the results first 4 loops (Rows 200 to 203). The values in M and O are the results of the fourth loop. Again, assistance is very much appreciated because I've taken this as far as I can with my limited experience. EDIT - I can embed the Macro, but it'll probably much easier to actually see it in the sample file.
View Replies!
View Related
Add Row If 2 Columns Have Certain Values
I am trying to utilise a spreadsheet i set up to monitor annual leave to work on desk allocation. The problem is i want the bottom of a column to sum or count based on the entry above it as long as another column had a certain value. To explain. Column C says if a person is an advisor and has the value "Y" if there are and if not it will be blank. Now there are another 30 odd columns after that and i need a total at the bottom of each seperatly to say if a row above has an "a" in it & the C column has a Y So i want to total all the entries in the E column that have and A entry & a Y entry in the C column. I will then continue this over the F ,g etc I am sre it is much easier than i have explained it
View Replies!
View Related
Locate Values And Add Text In The Same Row
I have created a form that will be used my many people. The first person will enter their information and click a button to transfer their data to a second workbook, as well as send the workbook via email. At a later time, someone else will add more data to the emailed form and transfer this to the database in the second workbook. What I need is to be able to find the row in the second workbook containing the data transferred the first time and add the data that was put in later to the same row as the original.
View Replies!
View Related
FORMULA TO ADD AMOUNT BASED ON TWO Or MORE CONDITIONS
i need a formula to add amount based on two or more conditons. From the drop down list on each change i want to do the sum to be displayed in C18; see the attached file for reference. i can do the same thing using pivot tables but i want to the same to be done using the array formulas. Also tell me any other array formulas like this which are useful.
View Replies!
View Related
Reference Column Cells And Add The Total From Row
i'm tracking hospital census with days of month in columns and patients 1 - XX in rows. this is basically what i'm working with. A...........B........C...D...E...F...G...H...I...J...AG...AH Patient...Payor...1...2...3...4...5...6...7...8...31...Total 1...........MCR.....x...x...x...x...x...x...d...............6 2...........COM.........x...d..................................1 3...........SP............s...s...s....s...d....................4 4...........MCR.............................x...d..............1 5...........MCR.............................x...x..d...........2 Total.................1...3...2..2...2...3....1..0.........14 The "total" cell formula is =COUNTIF(G7:AK7,"X")+COUNTIF(G7:AK7,"s") S and X just identify where that patient is med/surg vs. skilled. I'm looking for a solution that will reference column cells B2-BX and add the total from that row (AH) if the payor of that row is MCR, then another cell that would do the same for SP, COM and so on. so in this scenario it would be something like COM...7.1% (SUM col AH where col B = "COM" ie. 1/14) SP......28.6% (SUM col AH where col B = "SP" ie.4/14) MCR...64.3% (SUM col AH where col B = "MCR" ie.1/14)
View Replies!
View Related
Row Values To A Column List!
I am trying to creatre a formula which list numbers from rows to columns by deleting the vertical spaces i.e. A1 lists empty A2 lists 3 A3 lists empty A4 lists 7 A5 lists 1 A6 lists empty result: Columns: B C D E F G 3 7 1 similar to stacking values into a nice hoz column and not noteing any spaces
View Replies!
View Related
Copying Values Down To The Last Row Of Column
I'd like the following code to do is to go through each worksheet in the workbook and copy the value of the formula in cell S2 down the S column to the last row based off of a count of rows in column B. It's not working quite right and was hoping someone would be willing to correct it.
View Replies!
View Related
Paste Values To Last Used Row In Column
I have three sheets in my excel workbook. In second sheet, I have a simple If condition that checks to see if new items from Sheet1 meet a condition (eg, if startdate from sheet1 = today()). I am trying to copy the cells from column A and paste the values in my other sheet. I want it to append after the last cell in column A of my sheet 3. Sub CopyNewCRs() Sheets("Sheet2").Select Range("A2").End(xlDown).Select Application.CutCopyMode = True Selection.Formula = Selection.Value Worksheets("Sheet3").Activate Sheets("Sheet3").Select Set myRange = Sheets("Sheet3").Range("A2").End(xlDown).Offset(1, 0) Worksheets("SDP_CR_Status").Range("myRange").PasteSpecial xlPasteValues, SkipBlanks _ :=True, Transpose:=False End Sub
View Replies!
View Related
Build Range From Column And Row Values
I'm trying to copy a pivot table cell onto another worksheet that has a table with Month-Dates across the top in columns and left-most column has several cells, each with a named range. I get an application error with: Sheets(shtSrc).rngSrc.Address.Copy _ Sheets(shtDest).Range(Sheets(shtDest).Range(rngDest).Row, Dt.Column) shtSrc and shtDest are Strings passed in to Sub for worksheet name. rngSrc is a Range passed in to Sub. rngDest is the Named Range of the destination cell. All of the values get passed in; I'm just not using the range properly I think. I'm not married to what I've got so far. Basically, as long as the pivot data gets copied at the intersection of the correct Date (Column) and Row I'll be happy.
View Replies!
View Related
Match Amount And Colour Row
I am trying to match by amount with 1 column to another in a different sheet. If Data in column A in worksheet 1 matches data in column b worksheet 2 then color the entire row in column A worksheet 1 red, I am matching by amount so it(amount in column a) can be within 1 $ of amount in column b worksheet 2 also color item in column b(worsksheet2) red if matches with column a in worksheet 1 both can have a threshold of 1$ difference
View Replies!
View Related
List Column And Row Values For Zero Valued Cells
I have a spreadsheet with about 300 products listed in column A. In row 1, I have 30 store listed across. This produces a grid of data with sales for the past 3 months. I would like to easily have a list of the product and store that had 0 sales. I have tried a combination of INDEX/MATCH as an array formula but can't get it to work.
View Replies!
View Related
Paste Values To 1st Blank Row Of Column In Different Worksheet
I have a template with data only in column B, with fields going down the rows. I'd like to copy B2, B4, B6...B24 to the next blank row (so the values need to be transposed to a row vs. column) in a Consolidated Workbook. Here's what I have so far: NextRow = Worksheets("Sheet2"). Range("A1000").End(xlUp).Row + 1 For a = 2 To 24 Step 2 Worksheets("sheet2").Cells(NextRow, a / 2) = Cells(a, 2) Next a Except that the formula above pastes the first value in column B of sheet2, any ideas on how to get it into column A? Worksheets("sheet2").Cells(NextRow, (a / 2)-1) = Cells(a, 2) gives an error. Also, instead of sheet2 in the same workbook, I need to paste the data into sheet2 of a different workboook (i.e. Main, located in My Documents.)
View Replies!
View Related
Inserting A Total Amount Field In Each Empty Row
to run a macro that enters a new row after each set of currencies (which have been sorted). I now need to enter a total balance cell within this empty row which calculates the total amount for each currency. I need to do this using the SUMIF function below: SUMIF($J$3:$J$300,"L/C",$I$3:$I$300)-SUMIF($J$3:$J$300,"L/D",$I$3:$I$300) the above basically lets me calculate the total but as no - and + signs were input it does this by recognising the 'dr' and 'cr' in the column next to the amount.
View Replies!
View Related
IF Statement- To Remain Blank Until An Amount Is Entered In That Row
Amount Amount Item Total Account $ - No Profit$ 629.50 $ - $ 629.50 No Profit$ 46.29 $ - $ 46.29 No Profit$ 2,333.01 $ 233.30 $ 2,566.31 233.3 $ - No Profit $ - No Profit $ - No Profit $ - No Profit #1 If there is an amount in column B, I want column D to reflect that amount. #2 If there is no amount in column B, I want column D to state the words "No Profit." #3 Already in column B is the formula =C1-A1. I tried =IF(B1=0,"No Profit",B1) but when I copy that formula down the spreadsheet, it inserts "No Profit" into all of column D. I only want "No Profit" to exist when there is a $0 resulting from the formula mentioned in point #3. When there is a blank cell in column D, I want it to remain blank until an amount is entered in that row?
View Replies!
View Related
Count The Amount Of Cells In A Column
I am trying to count the amount of cells in a column (Col H) containing data against a certain date which is displayed in another column (Col B) Eg. Col B................-...........Col H 13/06/09.................FIRST LAST 13/06/09................. 13/06/09.................FIRST LAST 20/06/09.................FIRST LAST 20/06/09................. So that in the sheet next to it it would appear: 13/06/09 - 2 20/06/09 - 1 The dates don't appear in row order and the sheet has a filter on it so I am unable to select the Col H and just use COUNTA
View Replies!
View Related
IF Priority Value Changes Then Move $ Amount To A Different Column
If the value in Column H changes then move the value from it's original location which would be either in J, K or L from there to the column corresponding with the value in H (reference 1=J, 2=K, 3=L). So, in the file, if H3 were to be changed to Priority 3 then I want the value to move from J3 to L3 and if it were to be changed to Priority 2 then I want the value to move from J3 to K3. The formula needs to work on all variations ie priority 2 changing to 1 or 3 for the whole sheet. There is conditional formatting - would be nice to keep it but no big deal.
View Replies!
View Related
Copy Values Of Cells In Column To 1st Empty Cell On Row
I have two sheets and I want to copy the values in a row in the first sheet to the second sheet. I am doing the following: Sheet2. Range("A1").Value = Sheet1.Range("A1", Sheet1.Range("A1").End(xlToRight)).Value But this only copies the value of A1 in Sheet1 to A1 in Sheet2. How should I modify it to copy the values for the whole range to the second sheet?
View Replies!
View Related
Autoshape Resizes According To Amount Of Data In Column
I type in a "O" into the little grid I made and then the locations are placed into cells A34, A35, A36 and so on. The arrow I placed into column B. It works if I manually enter anything into A34,A35,A36 and it stays with the data. If I let the grid automatically populate A34, A35 and so on, it will not grow as the cells in A34, A35 are automatically populated. How can I make it do that one little thing? Sorry if I am confusing.
View Replies!
View Related
Find All Row Values Selected In Multi Column ListBox & Fill Adjacent Cell
I have a listbox that has row and columns. The rows are combinations of options and the columns are Additives. After selecting a row in Listbox1, (first column are names) i would like the value of the second column to goto a specific area.... find that value and in the cell to the right of it place a "Y". The "Y" would indicate that "yes" it was part of the selection row of the listbox. Same for third column, forth, fifth and sixth. The result from the listbox is a number of Y's and N's in the result page. Then making all that were not part of selected line and equal to "N" to hide row (height = to zero). Listbox and expected result are in attached example worksheet. The attached does show the need much better then I can explain it.
View Replies!
View Related
Copy The Information From The Row Directly Above The New Row And Paste (values, Formulas, Formats, Etc) Into The New Row
1. In whatever cell is selected when the macro is run, enter a new row. 2. Copy the information from the row directly above the new row and paste (values, formulas, formats, etc) into the new row. 3. Return to column P in the new row, i.e if the new row is row 11, then return to P11, for row 12 return to P12, etc. I have tried recording the macro but because it is hard coded to specific rows, its not working. I have attached a sample copy of the sheet (had to zip due to the size of the file).
View Replies!
View Related
The Next Value Higher Than Itself
I spent a lot of time on this but still can't figure this out. I have DATA DATA RESULT 10 20 20 below no more larger value 12 15 8 15 15 below no more larger value 6 NA What I want is the RESULT column. The RESULT column returns the next value that is larger than the reference. E.g. The next value that is larger than 10 is 20. NOT the next larger value, the next larger value of 10 is 12. This is not what I want.
View Replies!
View Related
Find First # Higher
I can't construct a formula that would do it for me. I have a row of numbers. I need to find the first number in that row that is greater or equal to 90, when that is found I need to return a number from a different row. Example: I have 90 in A1. In row B2:F2, I have numbers like -125, -100, -90, 90, 91, 150 etc. In row B1:F1 I have rates like 4.25, 5.5, 3.75, 5.625, 6.00, 7.00 etc I need to get the first number that is >=90, and return the rate above that number. ( Rates are always in one row)
View Replies!
View Related
The Higher Number Becomes The Average
In a grade book, if students get a grade on the final exam that is higher than the midterm grade, this becomes the exam portion of their (if it's lower, it's averaged). So a student who gets an 81 on the midterm and a 90 on the final gets a 90 for the exam portion of the final grade. What's the easiest formula to make the final exam grade the average if it's higher than the midterm grade? Right now the formula I use for the course grade is this: =SUM(I3*$I$1)+(J3*$J$1)+(K3*$K$1) where I3/J3/K3 are the midterm/final/quiz averages, and I1/J1/K1 represents the respective % (30/40/30) of the grade assigned to the midterm/final/quizzes.
View Replies!
View Related
Match Values In One Column To Values In Another With A 3rd Column Included
I have about 360 records in Column 1 and less columns in Column 2 (333 in this case). All the values in Column 2 are in Column 1. I need to be able to match those two columns up while keeping the data in Column 3 intact with it's corresponding value in Column 2. FYI I searched and found this thread: ttp://www.excelforum.com/excel-work...n-another.html But my problem is that I have to tie in the values with column 3 to their corresponding values in column 2. In order to illustrate, I have attached an excel file in which I did the operation manually. (note: all values in column 2 are indeed in column 1 but not in the example as I have shown for the sake of convenience).
View Replies!
View Related
Matching Row Values Together And Adding Corresponding Row Values
To best explain my problem I will use this example Dog 2 400 Cat 4 300 Car 1 200 Dog 7 800 Car 8 900 That data is in the top of my worksheet, and I would like to be able to find all the dog values then reference the 2nd and 3rd column and add all the dog values up and then post the totals in a area below like this dog 9 1200 cat 4 300 car 9 1100 Stipulations 1) there are different amounts of values, there may be 1 dog value or 10 dog values, I would like the program to recognize the dog values and add the corresponding values. 2) dog, cat, car values are not the only values, there may be others like "tree, apple" but are not in use. So only values in the top of the spreadsheet get referenced to the bottom part.........................
View Replies!
View Related
|
TRACKER
