Cell Value In A Column Less Than Specified Amount
I just need a warning box that indicates a user has entered a cell value under 200. Here's what I have but it's not working.
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Reference Cell & Add Amount If Positive & Subtract Amount If Negative
Im trying to set up an active running inventory sheet where: (A)the progressive daily sheet cells reference back to the corresponding master sheet cells fluctuating the master values, (B) the same progressive daily sheet cells reference back to a cummulative totals-cell based on whether I added or subtracted inventory. I want to make a copy of the blank "sheet 2" with all of the formulas and move it to the end of the workbook each day and enter new values which will reference back to the master sheet so that I can click on a date sheet and see an individual day's values or click on the master sheet to see the fluctuating inventory on-hand and the cummulative +/- totals of all days combined. I've got a couple hundred individual cells to reference. I've tried and tried but I can't make it work. Heres what I need to do: I need to reference individual cells from "sheet 2,3,etc" back to a corresponding cell in a master sheet. But I need the values in each cell in "sheet 2,3,ETC" to increase or decrease the corresponding cell values in the master sheet. For example: If the value in the master sheet B5 is 200. Then in sheet 2, I enter +50 in B5, I need the master sheet cell B5 to increase by 50 to 250. I also need a way to decrease the cell value in the master sheet B5 if I enter a negative value -50 in sheet 2 B5. I also want to know if I can reference the same cell values entered in "sheet 2,3,etc cell B5" back to totals columns C5 for adding inventory or D5 for subtracting inventory in the master sheet where the master totals columns would reflect cummulative totals added or subtracted. For example: if the value in sheet 2 B5 is +50, then the value in Master sheet C5 would add 50 to a progressive total. But if the value in sheet 2 B5 is -50 then the value in master sheet D5 would add -50 to a progressive total.
View Replies!
View Related
Add Amount In Column
Trying to add a formula in my spreadsheet that will add every amount in column AQ8:AQ200 if the date in AQ8:AQ200 is march. The format for the date is 3-12-09. Here is what I'm trying. =SUMIF(AU8:AU200,MONTH=3,AQ8:AQ200)
View Replies!
View Related
Count The Amount Of Cells In A Column
I am trying to count the amount of cells in a column (Col H) containing data against a certain date which is displayed in another column (Col B) Eg. Col B................-...........Col H 13/06/09.................FIRST LAST 13/06/09................. 13/06/09.................FIRST LAST 20/06/09.................FIRST LAST 20/06/09................. So that in the sheet next to it it would appear: 13/06/09 - 2 20/06/09 - 1 The dates don't appear in row order and the sheet has a filter on it so I am unable to select the Col H and just use COUNTA
View Replies!
View Related
IF Priority Value Changes Then Move $ Amount To A Different Column
If the value in Column H changes then move the value from it's original location which would be either in J, K or L from there to the column corresponding with the value in H (reference 1=J, 2=K, 3=L). So, in the file, if H3 were to be changed to Priority 3 then I want the value to move from J3 to L3 and if it were to be changed to Priority 2 then I want the value to move from J3 to K3. The formula needs to work on all variations ie priority 2 changing to 1 or 3 for the whole sheet. There is conditional formatting - would be nice to keep it but no big deal.
View Replies!
View Related
Autoshape Resizes According To Amount Of Data In Column
I type in a "O" into the little grid I made and then the locations are placed into cells A34, A35, A36 and so on. The arrow I placed into column B. It works if I manually enter anything into A34,A35,A36 and it stays with the data. If I let the grid automatically populate A34, A35 and so on, it will not grow as the cells in A34, A35 are automatically populated. How can I make it do that one little thing? Sorry if I am confusing.
View Replies!
View Related
Formula To Add Amount Of Rows In A Column
I know a bit about excel nut not a hugh amount! i need to know a formula that adds the number of rows used in a column. Does that make sense?? ok NAME rob dave jim darren adam lee i need a formula that will tell me there is 6 rows used in that column (not including the title).
View Replies!
View Related
How To Add Values For Amount That Are Higher Than Same Row In Another Column
I have two columns (let's say column A and C), i would like to add the values in column A only if they are higher than the ones in Column C in the same row... how could i do that? The sheet looks something like this, i would like to add the values in the first column only if they are higher than the ones in the third column and then of course get the sum of them... i would also like to know how many were there in total, but i guess i could do that with a count formula i just need the parameters $ 67,100.00 $ 110,000.00 $ 165,100.00 $ 146,034.00 $ 239,400.00 $ 220,100.00 $ 90,184.69 $ 147,843.75 $ 168,500.00 $ 51,011.25 $ 83,625.00 $ 95,100.00 $ 89,860.32 $ 147,312.00 $ 198,200.00 $ 159,121.36 $ 260,854.69 $ 26,000.00 $ 129,941.44 $ 213,018.75 $ 235,700.00 $ 88,869.38 $ 145,687.50 $ 95,600.00 $ 27,772.54 $ 45,528.75 $ 43,000.00
View Replies!
View Related
If Statement To Accumulate An Amount In A Cell
In a cell I have a description, say "FOOD" then another cell with amount say £2, then in another cell I want it to be looking and if it sees "FOOD" entered, it takes the amount £2 and adds it to a running balance. Cell A1 = Food Cell B1 = £2 Cell H1 = (looks and if Food) adds £2 to cell
View Replies!
View Related
Putting In A Minimum Amount In A Cell
I have a row that is a percent of sales with this: =(F4*0.2+G4*0.1)*I4 "I4 will either be 1.0 or 0.5" Now I want to have it so if this equation equals less than 100 with I4 being 1.0 to equal 100 OR if I4 is .5 then it should be 50. I have looked all around and I am no excel wizard so this is troubling me significantly.
View Replies!
View Related
Limit The Amount Of Characters Per Cell
Is there a way of limiting the amount of characters you can enter in each cell? Also is there a way to apply this to an existing sheet that has cells with more characters in it than I would like? ie. If an existing cell has 25 characters in it, could i cut it down to the first 10?
View Replies!
View Related
Formula To Put An Amount Into A Cell Next To Only Unique Item
Col A contains SS#'s and Col B contains names. Quite often there are duplicates and sometimes triplicates because they may be sending payments for multiple providers. We charge one fee per client (unique SS#), regardless of the number of times they may be on the spreadsheet. I can get a grand total by summing the unique items by using this formula: =SUM(IF(LEN(A2:A4970),1/COUNTIF(A2:A4970,A2:A4970))) and then doing a CTRL-SHIFT-ENTER to put brackets around it so it will "take." However I now need to show the fee by each unique name. Right now I am inserting Col C, typing in 3.00 into C2 and copying on down, but then have to manually remove the amounts in the rows which contain duplicate ss#. Long painful process. How can I put a formula in Col c so that it will only show fee one time by the first unique ss#?
View Replies!
View Related
Cell That Doesn't Reach The Desired Amount
function that add to any cell that doesn't reach the disired amount. If the required number is 14 and a calculated cell comes up with 13 or less; I need a funtion to take that number and add a penalty number to it. For example: For arguements sake the penalty is $150.00. Suppose cell 1A has 5 and cell 1B has 5; cell 1C adds them for a total of 10. I need cell 1D to realize that the number in 1C did not equate to atleast 14 and therfore 1D should show $150.00 and for every cell selected that falls short of 14 should add an additional $150.00 to 1D.
View Replies!
View Related
Cell Format: Only Numbers (no Date) With Any Amount Of Decimals
I need a cell to restrict the input: -Only numbers are allowed. -No date posible. -Any amount of decimals (they must all be shown in the cell). I tried using the data validation and using the IsNumber() to restrict any non numeral input. The problem with this approach is that if the user enters a date; it apprears as a date format (eg: "5.May"). I'm using an european excel, where the decimal separator is a comma instead of a point; so if a user accidentaly types "5.5" instead of "5,5"; the cell will show "5.May". I also tried the cell format/number/number format. The problem in here is that I dont know how many decimal positions will the input number have; and I need them all to be shown.
View Replies!
View Related
Formula To Show A Date Range Based On The Amount Shown In Another Cell
Attached is a excel file that has a working formula for tracking cashier variances. I edited out names etc. I added a new cell called Track Back on the employee search sheet. What I want to do is only show variances for the amount of days back selected in the Track Back cell. For example if I select the last 30 days, only the last 30 days would show up below in the sheet. I am not sure if this is even possible based on the forumla that is already on the sheet. I couldn't figure out a way of doing it. But there are a lot of people on here much better with excel than me
View Replies!
View Related
Operational Model - Shift Start Time Plus Amount Of Hours Worked In One Cell.
Is it possible that a cell contains both numeric and alphanumeric data and to do calculations on that? For example: if a cell conatain the value "10a" or "8.5b" etc. Would it be possible to have a column that gives me the hours worked (the numeric value in the cell) and a line that gives me the amount of people that are working on shift "a" (the alphanumeric value in the cell). Is this at all possible? Or does that require VBA/Macros and stuff (in which case this is posted in the wrong part of the forum )
View Replies!
View Related
Repeat Rows By Mutiplying Current Amount Of Rows By Cell Value
I have a table which contains a list of branches eg; 01 02 04 06 I then have a spreadsheet which contains a number of columns and rows. I want to create a new spreadsheet in the first column it will contain the branch from the table above then the rows and columns in the above spreadsheet The rows and columns would then repeat for each of the other branches in the table. IE if I have 4 branches in my table and 100 rows in my spreadsheet my new spreadsheet would contain 400 rows
View Replies!
View Related
Dollar Amount
How can I display the $xx.xx into a statement? I have these $ amounts in column A: 99.12 107.65 14500.99 Have the result in column B as: Please Pay Exactly$00000xx.yy (where xx is tenth, hundreds, thousands and yy is the cent) 00000 is to prevent forgery and to have the results in column C using same column A: Please Pay Exactly$0000xxDollars and yycents For example like Please Pay Exactly$000099Dollars and 12cents or Please Pay Exactly$000014500Dollars and 99cents
View Replies!
View Related
Replacing $ Amount With X
I need a formula that will replace a dollar amount with an X. In other words...I have 10,000 cels and half of them have dollar amounts in them...I would like to replace them with the letter X without having to manually do it...
View Replies!
View Related
Macro - If Cell In Column Is Blank Then Input Text Into Same Row In Another Column
I am looking for a Macro that will search a column for blank cells, and when one is found will add text to the same row in another column. For example: The below is a spreadsheet. I am trying to find something that will search through column "C" in this case and add text (of my choice) to Column "A" if the cell is Blank. So Since cell C1 is Blank then Type "ERROR" is cell A1. A B C D E 1 X X X X 2 X X X X 3 X X X X X 4 X X X X 5 X X X X
View Replies!
View Related
Conditionally Format Each Group Of Rows And Each Column And Color The Cell In Each Column
I've a worksheet that is 3750 rows of cells from A to DT and contains only numbers with the exception of a header row. The rows are in groups, primarily 4 rows, although there are exceptions - these rows are separated by blank rows. Small example as follows. 0:001:002:003:004:005:006:007:008:009:000000-296567-6-1-400000286567-300-230000715557-16-11-40-18141755226-348405-362203081417192125-893581061800-2443-11124-289326-81318-1105027854331331211318-10216-161235526785691450451115951-17-1882505656683093102671056-191-33-2710000554740971-61-78-34224107-169-128-17090179-85220-55-63-1-162-140-242-235328266319106113-214-64-148205-4108120-142076-167-60-68-6418081102-800000000000-3099695807185-80356138-123194186210677727125-23233092-2942944748055564476-422051-224-34461486649597117-84209-22-251-94 I have been trying to conditionally format each group of rows and each column and color the cell in each column of four (or less) numbers in each group that represents the maximum number. It was easy enough to come up with the conditional formatting BUT it will take forever to do this manually. I've been told to use a macro but I know nothing of programming. Has anyone seen or heard of a macro that might already be written to perform this onerous task.
View Replies!
View Related
Multiply Every Nth Cell By Another Column Whith Merged Cells, THEN Find Column Total
Please see the attached sheet. I have columns B through a lot (B through O in my oversimplified example). In every 7th row in each of these columns there is either a 1 or a blank/zero. I need to multiply that 7th number by the Quantity in column A, to achieve a total (ie the sum of each result of 7th cell*quantity) for each column in the bottom row, labeled "Totals". In the actual version of my sheet, there are far too many rows to select everything manually. I've been fiddling with combinations of COUNTIF/COUNTA and OFFSET, but I haven't come up with a way to check for the 1 in every 7th row, THEN multiply that 1 by the quantity in column A, THEN add up the results for each column. As you can see, there are 1's elsewhere in the columns that are irrelevant to this particular calculation, so something like LOOKUP would also have to look in every 7th cell and couldn't just look at the column as a whole. If you can't provide an immediate solution, but can at least point me to a resource that would allow me to devise a way to isolate every 7th row (THAT part is the sticking point), I'll surely post the solution to my own thread with updated keywords if I need it.
View Replies!
View Related
Find Value In Column & Return Cell On Same Row- Different Column
I have an excel sheet I am working on and in columns F1:F2000 I have an IF statment, I need to be able to add more "IF"s to it but I will exceed the 1024 char limit. Is there a way I can put this formula into VB as a function called DocumentType() and then in excel F1:F2000 =DocumentType()? Is it as simple as: Function DocumentType() If(...........) End Function
View Replies!
View Related
Calculation A Total Amount
I am trying to write a calc for a total an amount based on a list choice Here is the Set up Fields A1 thru A255 are number 1 to 255 Fields B1 thru B255 are number 255 to 1 Field C1 is a List box set using A1 to A255 and its list Field D1 is set as the needed Calculation When you choose a number in C1 the D1 calculation should total the amount of Fields B* to B1, * being the corrisponding B field to the A field from the list Example C1=100 (Field A100) D1=Sum of Fields B100 to B1
View Replies!
View Related
Amount To Words Conversion
I am using excel for invoice making...In the end i have a total amount. I need to type it in words for every invoice at present. How can i convert it to words automatically? Is there any formula to it? Or is there anything else? Please suggest me friends.
View Replies!
View Related
Rasterize Displayed Amount
I have a column with dates in the following format: dd/mm/yyyy h:mm but im doing an XML export and excel only exports in text format. I would like to somehow resterize or only use the displayed amount instead of the text which is exported (ie- 37805.1640277778)
View Replies!
View Related
Subtract X Amount Every Y Years
I am building an investing strategy model and am looking for a fomula or combination of formulae that would subtract an amount (lets say a 100) every so many years (lets say 10). Data is set up horizontaly, i want to be able to set how much will be subtracted and how often in a "control panel" next to other inputs and variables. I am not proficient in Macros and most often have trouble with them so if its possible to solve this without using any that would be great.
View Replies!
View Related
|
TRACKER
