I am using the INDIRECT function to get data from sheets with different names, with the format INDIRECT(SheetName&"!$A$1"), with SheetName defined as the contents of a particular cell which contains the name of the sheet. This works fine with the exception of sheets which have names starting with C01V. Is there something special about these names? If I change the 0 to O or the C to A, B or D, there is no problem. Sheet names C0, C01 also don't have any issues.
Assuming that Sheet2 is blank, this of course copies the rows to Sheet2 starting at Cell A2 and down column A. I would like to modify the code so that I can specify at which row the copy should start. For example, I might want to start the copy at A1 instead of A2, or at A10 instead of A2.
I need to create a sheet that will take payments away from a starting balance. The catch is that I don't know the starting balance. The interest is compounded annually at 3% and each withdrawl is different. My sheet needs to show the interest earned in each year and the account balance like a running sheet, after lets say 5 years there needs to be no money left.
I have a worksheet that will have tabs added as time goes by and a macro within the workbook currently selects all of the sheets and copies and pastes formulas within all of the sheets simultaneously. Right now, if a tab is added, the macro needs to be updated to select that specific tab name as well.
I would like to simply have the macro select all of the sheets starting with "IL" until the sheet before "reference", or all sheets except the first 3 and the last 2 if that is easier. Any ideas? And thank you for your help, you people really amaze me sometimes!
I have multiple sheets as Name1 ; Name2 ; Name3 and each sheet have a value on cell A1 for any number let say between 0 to 100. On another sheet call SheetName, I have A1=Name1 ; A2=Name2 ; A3=Name3.
I have formula as:
[Code] .....
The INDIRECT formula work to refer each cell A1 in each sheet, however if the sheet name include a space then it won't work anymore. How to make it work with the sheet name with space?
I want to do is copy data to my working sheet (say sheet-1) from other worksheetx (say sheet-2, sheet-3). That's easy enough, but I want to be able to indirectly address "sheet-2" or "sheet-3" from a cell in sheet-1.
Look at the attachment. The data under cost A, cost B, cost C is from other sheets in the same workbook. I want to able to type in "sheet-2" in the first column and Excel to automatically copy over the data in columns 2,3,4.
I do not want a VBA solution. I know this can be done with built-in Excel functions because I did it before. Unfortunately, I lost that spreadsheet and I can't recall how it was done. I tried using Indirect function, but it returns a ref# error.
I've tried to find the solution and the options I've tried I just can't get the code or syntax correct...
I have a workbook with 11 sheets in, 10 data sheets, and a summary
On sheet call "CB", I want to select any cell, then, via VBA, on sheet "Summary", in cells b4 to b14, where a4 to a14 have the sheet names, I want to reference the cell I selected, using the Indirect function....
Cell F4 contains a worksheet name which was “calculated” by an IF function (IF something, then ‘T2’, otherwise ‘T3’).
Cell F5 must then look at either sheet T2 or sheet T3 (depending on what it is told to do by reference to cell F4 just above) and report what it finds in cell A1 there.
Clearly I must use the INDIRECT function. But I have tried every imaginable combination of single and double quotation marks to produce the equivalent of =T2!A1 all to no avail.
Is it something to do with letter and number combinations?
Alternatively, how else should I achieve what I want?
PS F4 could have been “calculated” by any other means, e.g. =MONTH(TODAY()).
I have a formula: ='Jan 7-11'!D10. I want to replace the tab name 'Jan 7-11' to change based on the content of F6 (which is a data validation for all tabs in my workbook).
I am trying to develop an Indirect Indirect Validation drop down list. Example, Building - Floor - Room, i.e. Select Building from a Validation drop down list. Then based upon the Building selected, select only the Floors applicable to the Building Selected. I am able to achieve this via an Indirect Validation drop down. However, when I attempt to then select the Rooms applicable to the Floor of the Building I selected, I can not produce an Indirect Validation off a previous Indirect Validation.
In the attachment, I have used Plant - Location - Room. I have name ranged the selections, and have used Validations Lists for Plant, and Indirect Validations for Location. The error occurs where I attempt to do an Indirect Validation for Room.
I am running the formula =VALUE(RIGHT(CELL("filename"),15)) to read the tab name in a workbook with 90 sheets. When a new account is opened, the operator inserts a new sheet from a template (which contains the above formula), and labels the tab to the account number. The formula then 'reads' in the account number and performs look-ups based on it.
The problem is that the sheets are only working when the sheet is active. They all seem to reflect the data in the active sheet or give me a #VALUE error. Where am I going wrong? How do I fix the problem?
Attached I have a document where I am wanting all of the individual sheet names on the Total page. Rather than having to change each formula to match the sheet name I believe there is a way to reference the sheet name column (AO) in the formula so you can drag it down to fill in the columns. I am basic with Excel and do not know how to add this indirect function into my current formulas.
I have a column with number of Km from location x to location y (A), and a column with fuel supply (B). I what to know how many km make the driver after the fuel supplyes (787 Km - for exemple from bellow).
I was thinking to SUM values from column A starting ROW 3 (column B) (first cell non blank), but i don't know how to match SUM and ROW functions.
I have the problem to get the starting and the ending time in a timetable work sheet, adding the starting hour in the first cell and in the second the ending.
1) I have added multiple command buttons as options within different categories but when I select one, all others are reset. Is ther a way to section off the command buttons into groups so that say the first three act together, the next two act together and then the last four act together, allowing a total of three options within three different categories?
2) How do I get the options from the userform to the worksheet?
I have Ctrl+x to run a macro and it is not working. I have used it before fine, but made modifications this time and am having problems now. I'll just show the code for now and can give more details if the fix is not obvious.
I want to build a Macro that basically moves right of the cell I am in a few cells and then copies and pastes this info into another worksheet and then prints this worksheet.
However, I can't seem to build a macro that will run from whatever cell I am in.
Everytime and try it just goes from the cell I was in when I recorded the macro.
For instance, if i build the Macro in row 1, but then want to run the marco in row 23, it keeps going back to row 1 whenever I press play.
I know there must be a way of telling it "move right 5 cells from whatever cell is highlighted when the Macro is run...etc"
I need some code to add to a macro that will delete customer account names that start with an "A" in column C. Specifically it needs to find customer names starting with the letter "A" and delete that entire row.
In row 6 column O I need for the formula to look at column I and determine if the month is 1, If yes then I need for it to determine if the date is one of the following,
Day(I6)>=1,Day(I6)<=5), If TRUE Then do the following Cells(J6)*1.04)*2080/12 If False then ElseIfDay(I6)<=6,Day(I6)=<12, If TRUE Then do the following Cells(J6)*43.33)+((J6*1.04)*129.99 If False then ElseIfDay(I6)<=13,Day(I6)=<19, If TRUE Then do the following Cells(J6)*86.66)+((J6*1.04)*86.66 If False then ElseIfDay(I6)<=20,Day(I6)=<26, If TRUE Then do the following Cells(J6)*129.99)+((J6*1.04)*43.33 If False then ElseIfDay(I6)<=27,Day(I6)=<31, If TRUE Then do the following Cells(J6)*1.04)*2080/12, but put this into column P
If row 6 Column O if the month is greater then 1 then I need the formula to do the following, =J6*2080/12
What I am trying to do is have excel take columns O through Z look back to column I and determine which month the performance review is due in. Then I need for it to determine which week the increase rate will be effective for. So for each month the “If the month is >1” would change to 2,3,4,5,…..and so on.
In addition I am going to have the formula look at the shift and if it =3 then (J68)+1.00, but for the increase I have to have it -1.00 then J6*1.04+1.00. I will also have to create a table that holds the max rate for each grade, and then figure out the formula to figure out this new rate.
I need the formula for statistical data analysis for a research project i'm helping out with, and this is too complicated for me to know where to even begin searching for the information. The problem is this:
I have a sheet (called Sheet1) containing 9009 rows of information on columns A to AL. I am interested in searching for the starting sequences of codes contained in column AI and returning values on the same row but in a different column. The formula that works so far is this (note: I use Excel 2003 and a swedish version, translated the formulas though)
I havent come up with this formula entirely on my own so dont think my expertise is this high In any case, this formula gives me the value of the A-column in the same row as the first N06 found in the AI column. If N06 isn't found anywhere in AI, it gives me "error". The problem is this: I want it to "continue" searching column AI for strings starting with N06 and returning the values in the A-column for the following N06s found. I basically want to wash out all rows of information that dont contain the string N06 in AI, and get the new information on another sheet.
To make it even clearer: I want to have all values on column A on a new sheet, but only where the AI value on the same row starts with N06. Eventually I want other columns as well, and also search for other codes, but that should be easy to figure out once I get the initial formula.
I'm trying to sum a range of data consisting of 12 cells (each range is in a unique row going across adjacent columns). The range of data to be summed is based on a lookup value which is a column header - I want the range to start with this lookup value. In column B of my spreadsheet, I have a 'First Activity number code' going down...In Row 4, I have the same First Activity Codes going across the row (the column headers). In Column U, going down the column I am looking for my formula.
So For example, in row 5 of my spreadsheet, I am looking at 73 as my base code (the value in column B), and I want a range of data summed that lies in the same row where the column headers are 73 - 84 (12 rows) - always starting summing the range with the same number that is in column B. So in row 18, 78 is my base number; so I would want the sum of the numbers in the same row where the column headers are 78-89 ( 12 columns).
