Copy Rows To Different Sheet Starting At Specific Row
Jun 19, 2013
I use the following code to copy entire rows from one sheet to another and this is pretty standard.
VB : rng.EntireRow.Copy Sheets("Sheet2").Cells(Rows.Count, "A").End(xlUp).Offset(1, 0)
Assuming that Sheet2 is blank, this of course copies the rows to Sheet2 starting at Cell A2 and down column A. I would like to modify the code so that I can specify at which row the copy should start. For example, I might want to start the copy at A1 instead of A2, or at A10 instead of A2.
View 5 Replies
ADVERTISEMENT
Jun 2, 2014
I have a spreadsheet where I track resources needed on a project. Each resource that is selected in the resource column has a corresponding % avg and an average number of months where the resource is used. % Avg and # of Months are found in a different worksheet.
What I am looking to do is, for example: if resource A will be on the project starting in May 2015 and assigned at 30% for 7 months, I want to populate 30% starting in the colunm labeled May 2015 and copy the 30% so that a total of 7 months are populated. Also, if any of the values change (i.e: the Resource Name or the Start Month) I want to erase all the percentages that were entered in the row. How can I achieve that with a VBA code? I have formulas that retrieve the # of Months and the % Avg already.
These are the columns that I have in my spreadsheet:
Resource NameStart MonthJan-15Feb-15Mar-15Apr-15May-15Jun-15Jul-15Aug-15Sep-15
View 2 Replies
View Related
Jun 12, 2008
I have a worksheet that will have tabs added as time goes by and a macro within the workbook currently selects all of the sheets and copies and pastes formulas within all of the sheets simultaneously. Right now, if a tab is added, the macro needs to be updated to select that specific tab name as well.
I would like to simply have the macro select all of the sheets starting with "IL" until the sheet before "reference", or all sheets except the first 3 and the last 2 if that is easier. Any ideas? And thank you for your help, you people really amaze me sometimes!
View 9 Replies
View Related
Jul 15, 2013
The senior members have made it less intimidating to start writing code. Infact I picked up a DUMMIES book and a Macro book and it's been a lot of fun. Anyway here is my code that I have created thus far.
HTML Code:
Sub ReportExtract()
Sheets("Sheet1").Range("B2").Copy Destination:=Sheets("Sheet2").Range("C4")
Sheets("Sheet1").Range("A2").Copy Destination:=Sheets("Sheet2").Range("C6") '
[Code]....
Essentially what I am trying to do is copy these cells from sheet 1 to sheet 2 and then save it as another file using the name of C6&"Text String *Report" This would essentially take the first record A2 - CL2 and then delete that record and move onto the next row 3 and loop through and create another file with the same name C6(Sheet2)&"Report Name" Sheet 2 is the template where the data from the rows will drop into. I have those called out above in the code. It works just fine. I'm stuck though with how to copy the file and move threw all the records and saving them as separate files. Just to make sure I am clear it's 1. Copy data from sheet1 to sheet2 (Template). 2. Then save that file with the file name as cell C6&"some text" concatenated. Loop through sheet1 grab the next record and rinse lather repeat. Just a few weeks ago I was struggled to create macros and now I can copy. Pretty weak I know but I really enjoy this, in fact I sold all my books and just have VBA material so I stay focused.
View 6 Replies
View Related
Mar 10, 2014
I would like to create a vba script when ran an input.box comes up and asks you to "enter number you want to start numbering from" and when the number is entered in the input box. e.g "7654", excel starts numbering each cell in column A from 7654 until there is an empty cell in column B.
View 7 Replies
View Related
Sep 4, 2010
Let's say I have a long macro and I want to test some code a ways down in the macro, but I don't want to have to run through all the code to get there, because I already have my Excel spreadsheet set up at the point I need to check and I just want to start checking the code a ways into the procedure.
Short of commenting out all the code above where I want to start, is there another easier way to do this?
View 8 Replies
View Related
Jun 20, 2008
I'm trying to write a macro that will find a value beginning "ber" and paste it across to a different column. I have had a go at it but I keep getting the offset flagged up.
It needs to move 15 columns across and 7 rows down if that is of any importance.
View 9 Replies
View Related
Apr 7, 2012
I'd like to be able to search a spreadsheet for a specific word or series of characters. Once all of the ROWS that contain the characters are found, I'd like to be able to have another spreadsheet with ONLY those rows (all columns).
View 8 Replies
View Related
Mar 31, 2008
I would like a macro that will go to a fixed sheet, copy the format, go back to the previous sheet and paste the format. My problems arise going back to the previously activated sheet rather than just a fixed sheet.
View 2 Replies
View Related
Jan 20, 2009
I would appreciate if someone can help me figure out a macro that will copy range (A3:T112) from "Step 1" sheet to next available row in "Step 2" sheet.
View 8 Replies
View Related
Feb 3, 2014
I need to add something to the code below to have my first row of data entered into cell "Q8". As it is now the data is starting on row Q9 instead of Q8, but the rest of it is filling in correctly.
[Code] .....
View 1 Replies
View Related
Aug 20, 2014
I need to unhide 2 rows at a time starting with rows 28 and 29 IF cell N28:O28 > 0. I need this to be for rows 30 and 31 IF cell N30:O30 > 0, rows 32 and 33 IF cell N32:O32 > 0, rows 34 and 35 IF cell N34:O34 > 0, rows 36 and 37 IF cell N36:O36 > 0, rows 38 and 39 IF cell N38:O38 > 0, rows 40 and 41 IF cell N40:O40 > 0.
There is currently a formula in each of the selected cells that is why I was going for greater than zero.
View 1 Replies
View Related
Feb 6, 2014
we have a Workbook... in this workbook we want run a VBA or Macro which macro copy a specific sheets (Sheet Name "Abstract") this sheet but when we copy this sheet then in sheet name show file name where this sheet come..
for eg.
if Abstract sheet copy ABC.xls file then sheet name show in my workbook ABC
We have 205 file in the folder (folder store in E:yr 13-14) is it possible that in few files abstract sheet not found..
View 3 Replies
View Related
Jul 18, 2013
I have a code which is copy/pasting the selection specified number of times
VB:
Sub CopyNtimes()
Dim i
For i = 1 To Application.InputBox("How many times do you want to copy the selection?", "", 1, Type:=1)
With Selection
.Copy .Offset(i * .Rows.Count)
End With
Next
End Sub
How to modify this code so that it can paste the selection specified number of times leaving specified number or rows
For Example:
Selection is A1:Z10
need to copy paste 2 times...
Rows to leave: 3
So it should paste in the range A14:Z24 and then A28:Z38
View 5 Replies
View Related
Nov 15, 2009
Column A lists an account code on the summary line of each invoice. I'd like to copy this account code upwards for each individual line of the invoice so that I can summarise each type of charge by account code in a pivot table.
I'm a bit stumped as to how to do it. If possible I don't want to have to modify the data itself in any way so that I can paste new data in the each day without altering it.
I've started on the right with a CountA function for each row, which I was intending as a means to identifying the blanks rows and discount them, but it also showed up that each line requiring an account code to be copied returns a 4 and each invoice summary line returns a 9. I'm just not sure how to reflect this in a function.
View 4 Replies
View Related
Jul 14, 2014
I have these specific rows (2,3,4,6,43,44,45,63) which I would like to copy and paste it on a designated sheet. But my problem is, the column varies depending on the YEARS.
I do have codes for it, the one I got from the recording. I just do it for all of the rows (formula pasted here) until all of it copied on the summary sheet. However, when I finally finished it and I run it. I could see the movement form One Sheet to another and its not good.
A code that I could use for my better understanding of MACRO.
View 3 Replies
View Related
Jan 27, 2014
I have some specific procucts in coloum A in sheet (data), If that product was found in Sheets("allproducts"), copy all the rows and create a new sheet on the product name and save the excel.
Sub SearchForString()
Dim LSearchRow As Integer
Dim LCopyToRow As Integer
On Error GoTo Err_Execute
'Start search in row 1
LSearchRow = 1
[Code] ....
Err_Execute:
MsgBox "An error occurred."
End Sub
View 2 Replies
View Related
Jan 27, 2014
I have some specific procucts in coloum A(a2, a3, a4, till a50) in sheet (data), If that product was found in Sheets("allproducts"), copy all the rows and create a new sheet on the product name and save the excel.
[Code] .....
View 2 Replies
View Related
Sep 14, 2009
I have the attached a workbook (& the code) which merges the worksheets from 7 different workbooks together into a 'Raw data' worksheet in my master workbook. It is driven off a parameters table which allows you to select which workbooks/worksheets you want to include in the merge. - The code works fine however when it is copying the data from each worksheets it is just copying all the data as a 'block' copy where I need it do do it row by row becuase I dont want to copy the row if colum C in each row contains no data, ie. it is blank.
So in my code I need another loop which will: Copy data from column A - E for each row if column C is not blank. Paste into Column B - F in Raw Data worksheet (as column A contains the source filename) Loop until it reaches no more data. I adeeally just want to copy the specific range as above, not the whole row but either will do. This is my code, refer to attachment too which includes master workbook and an data entry workbook where the data comes from.
Sub OpenWorkbooks()
Dim Book_Name As range ' List of available books
Dim Sheet_Name As range ' List of available sheets
Dim dLastRow As Long
Dim oLastRow As Long
Dim sLastRow As Long
Dim DestinationSheet As Worksheet
Dim SourceSheet As Worksheet
Dim WorkBookList As range
Dim WorkSheetList As range
Dim WorkbookPath As String
With Application
. ScreenUpdating = False
.DisplayAlerts = False
.EnableEvents = False
End With
'set source and destination sheet
Set DestinationSheet = Sheets("Raw Data")
Set SourceSheet = Sheets("Parameters")........................
View 5 Replies
View Related
Sep 4, 2006
I have workbook "Sheet1" that has many rows and columns with values. Could I have code to find the cells value "plant2300" in column A and copy all the rows in column A that has the cell value "2300" into workbook Sheet2 (also copy with headers from Sheet1 to Sheet2 row 1).
View 3 Replies
View Related
Jun 29, 2008
I have a workbook for a category of academic journals. It contains the journal name in the first column, the year it was published in the second and various bibliometric stats in the next twelve as follows: ....
View 9 Replies
View Related
Jul 4, 2006
I just want to check that if it is possible to copy specific cells from one row to another sheet by using macro or any other script.
Attached is a sheet which explains what exectly I want
The sheet one is having Source data
Sheet three is the result sheet
If I put some code numbers (in number form) it should search the data from source sheet and update the same in result sheet in different rows
View 9 Replies
View Related
Nov 12, 2008
I need to get a function that can copy some rolls in a worksheet 1 to worksheet 2 by sorting worksheet 1 according to column A of that sheet. I have attached a sample of what i intent doing for bether understanding.
View 2 Replies
View Related
Jan 28, 2014
I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014
28/1/2014
28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
View 9 Replies
View Related
May 22, 2006
Using an external UNIX program that quieries a database, I export all the data found based on my query and export the report as a text file. THe text file can be up to 1 MB of raw text.
Selecting all text and pasting the data into collum 1 using PASTE SPECIAL -->(TEXT)
All Data is in Collum A
Each record returned has between 40-50 values each on a seperate row, only 10 of which I need.
I am looking for a way to find the rows that begin with the unwanted field, and then delete the entire row.
Otherwise ignore the row.
IE:
AUDFI : (data path loc here)
BILLNUM : 060606
CUTNUM : (0000)
SD : 120012
ED : 121259
CC : 123456789 MATERIAL LISTS AND ITEMS
COMMENT : Multiple lines of text here
with continuing free form data, numbers, operators,
then the next data file would repeat:
ADUFI : (data path loc here)
...
...
...
etc.,
In the above example, I want to delete the rows AUDFI, & CUTNUM and move the below items up to take the empty rows place. The BILL NUM, SD,ED, and COMMENT are filed that are always kept (as well as others). Each record has roughly the same data, each tailored to an event or object.
The number of rows of data dumped into excel can easily exceed 50000, about 200 - 1500 records in the report.
After wards, the data is dumped to a text file for easier analysis.
In BASIC my line might look like
5 START
10 if A:$="AUDFI :" then delete row, move below contents up.
20 if A:$="CUTNUM :" then delete row, move below contents up.
30 END
(I think there needs to be a loop since the vaules AUDFI and CUTNUM (as well as other unwanted fields can occurr 200 - 1500 times each.)
View 7 Replies
View Related
Aug 28, 2009
I have two workbook having 8 worksheet each. Every day I need to copy data from previous day worksheet and paste it on new workbook with same sheet name.
For example :-
Workbook1 is having sheet named aa, gg, tk .....
Workbook2 is having sheet named as same as Workbook 1
Now, I want macro to copy data from Workbook1, sheetname 'aa' and paste the same in workbook2 in sheet name 'aa' and likewise
View 6 Replies
View Related
Sep 27, 2009
Yeah it is 1:33 am where I am.
I'd like to filter a column and paste only 2 columns to another sheet in the first available row.
I found a code that was posted by Tom Ogilvy and made a few adjustments: ....
View 14 Replies
View Related
Nov 15, 2006
I have a excel file with two worksheets. I need to find a specific row in column g, cut the entire row, and paste it into sheet2. I have started off by using this code, that I got off of some site. It works wonderfully in finding the specific cell, but just copys and moves the specific cell into sheet2. Whereas I need it to cut and paste the entire row where it finds the cell that begins with a 3 in column G.
Sub Copy_To_Another_Sheet_1()
Dim FirstAddress As String
Dim myArr As Variant
Dim Rng As Range
Dim Rcount As Long
Dim i As Long
View 9 Replies
View Related
Jul 28, 2006
This is the code I have:
Sub Auto_Open()
Sheets("Data").Select
Range("A2:E32").Select
Selection.Copy
Sheets("May").Select
ActiveWindow.SmallScroll Down:=-9
Range("A2").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("A1").Select
Sheets("Data").Select
Range("A1").Select
ActiveSheet.Paste
Range("A1").Select
Sheets("Sheet1").Select
Range("A2:E32").Select
Selection.ClearContents
Range("A1").Select
End Sub
1) How do I set this up so that if the cell Z1 reads 1, it will paste the data to the "January" Sheet, if Z1 reads 2, it will paste to "February" Sheet, if Z1 is 3 it will paste to "March"......
View 9 Replies
View Related
Apr 29, 2014
What I am trying to do is to look at specific columns, then copy the data in that column from specific rows from sheet 1 (named TIA) to sheet Macro1. I think uploading a sample of the spreadsheet would be useful.
Unfortunately the spreadsheet is a living document and continues to grow in both column and rows.. The data extracted at this point is from row 7, 23-60 and copied into the new worksheet starting at A1.
Requirements:
1) Row 5 states the macro the column will be associated with. There can be more that one macro associated to a column.
2) When column is found, data from row 7 column (x) will be copied to sheet macro1 EX. If Cell G5 = macro1 then copy data from G7 to sheet macro1 at A1
3) When column is found, data from row 23 column (x) will be copied to sheet macro1
4) repeat requirement 3 till no more Scenario's
View 14 Replies
View Related
