The following formula gives me the error message #REF!
=INDEX(INDIRECT("R7"),MATCH(V6,D8:D11,1),11)
The problem I believe is in the INDIRECT("R7") as the following formula works
=INDEX(Well_AA_09,MATCH(V6,D8:D11),1),11)
The content of cell R7 is the text Well_AA_09 which is the name of a dynamic range I have created and pasted from within VBA into cell R7.
I have a series of menus in column C. I need column D to be able to access them and return the proper data.
I am using =INDIRECT(SUBSTITUTE(10C," ","")) and keep getting error after error.
MainstreamProductMgr2013-1.xlsx
In column J, Cad Hrs. How to make to display (0), instead of (-0,02) when I just do other work than Cad Work? I need to separate type of work according to price hour, overtime, and so on.
View 2 Replies View RelatedI've been given a formula to use (embedded in an add-in that is password-protected). One of the parameters REQUIRES quotes.
The formula goes like this: =MYFORMULA(1,2,3,"ABC")
If I put ABC in a cell (say C5) and use the formula =MYFORMULA(1,2,3,INDIRECT(C5)), the formula doesn't work.
If I put "ABC" in cell C5, the indirect function still work make the function work.
Even if I have ABC in cell C5 and use =MYFORMULA(1,2,3,""""&C5&"""") or =MYFORMULA(1,2,3,""""&INDIRECT(C5)&""""), these won't work.
I wish I could just change the UDF behind this, but that isn't possible.
I have approx 500 workbooks which contain custoemr details and I need to extract certain info (postcode, name, contact, phone number etc) and place it all on 1 spreadsheet. I was originally going to source data from unopen workbooks, but have realized I only need to do this task once, and I can maintain it from then on...
I have created a spreadsheet (attached) which uses INDIRECT formulas to retrieve the data. When I type in the file name in column A, Columns B to K fill themselves in. What I want to know is:
Once I open say, 10 Workbooks, TYPE the name in manually and all the other cells have filled themselves, I want to somehow KEEP the data there, rather than it return a #REF error when I close the workbooks to open the next batch.
Also, if you look at my workbook, to the far right is a range of data which I use in my INDIRECT formulas. Once I have filled all the cells with the relevant data, I want to be able to Filter my spreadsheet by Date Ascending. BUT I cant seem to do it because it includes my INDIRECT range in the filter and mess's up the formulas then I have tried Locking & protecting workbook, with Autofilter & select cells etc TICKED for users to use, but it still tells me to unlock workbook when I try to filter.
Attached I have a document where I am wanting all of the individual sheet names on the Total page. Rather than having to change each formula to match the sheet name I believe there is a way to reference the sheet name column (AO) in the formula so you can drag it down to fill in the columns. I am basic with Excel and do not know how to add this indirect function into my current formulas.
View 5 Replies View RelatedI've got a PDF file that I was hoping to convert into an Excel sheet, but it doesn't look like that's possible, xince I'm working with only Adobe Reader, not Acrobat. Anyway, I need to compare 1 column of this report to another report that IS in Excel. Is there a way to have a macro compare an Excel file with a PDF??
View 2 Replies View RelatedI have a fairly simple macro (below). I want it to do one more thing.....not run if the filters have not been changed. I would like to prevent the error that occurs if someone tries to run it and there are no filters active.
Private Sub AutoFilter_Remove()
Sheets("Data").Select
ActiveSheet.Unprotect "password"
ActiveSheet.ShowAllData
[Code].....
I've developed a spreadsheet that shows what errors people made in their spreadsheets. I compare cell A1 in spreadsheet 1 (original) against cell A1 in spreadsheet 2 (final), in spreadsheet 3. Spreadsheet 3 shows a "-" if the cell they wrote was OK, and shows the new, correct value if they made an error, as follows:
=IF('Final'!A5='Original'!A5, "-",'Final'!A5)
The problem is, this only works if I take the original spreadsheets, which contain formulae in each cell, and paste them into a new spreadsheet using paste values.
Is it possible for the IF function to search the formula in a cell, and not the value?
if i enter a value in 1 cell and want it to increase by a percentage how can this be done without having a sum column etc
View 9 Replies View RelatedI'm having some difficulty with this one. I have found several posts on how to make a macro work through several rows, but cannot seem to figure out how to apply it to my macro.
Right now I'm having to write the macro for every line and it's a bear! Here's what I'm working with right now and it's ridiculous (I've actually got through line 51, but I'll only post a few here, for your sanity!)- there has to be a better way:
If Range("C9") = "" Then
Range("T9").Formula = "=IF(K9>I9,IF((I9-H9)>=180,180,(I9-H9)),IF((I9-H9)+(K9-J9)>=180,IF((K9-J9)>=180,0,180-(K9-J9)),(I9-H9)))"
Range("U9").Formula = "=IF(K9<I9,IF((K9-J9)>=180,180,(K9-J9)),IF((I9-H9)+(K9-J9)>=180,IF((I9-H9)>=180,0,180-(I9-H9)),(K9-J9)))"
Else
Range("T9").Formula = "=IF((T8+U8)>=180,0,(IF(K9>I9,IF((I9-H9)>=180,180,(I9-H9)),IF((I9-H9)+(K9-J9)>=180,IF((K9-J9)>=180,0,180-(K9-J9)),(I9-H9)))))"
Range("U9").Formula = "=IF((T8+U8)>=180,0,(IF(K9<I9,IF((K9-J9)>=180,180,(K9-J9)),IF((I9-H9)+(K9-J9)>=180,IF((I9-H9)>=180,0,180-(I9-H9)),(K9-J9)))))"
End If............................
I'm trying to convert some data from MLS to make it easier to work with statistically. The raw data regarding Bath count downloads from MLS in 2 columns; 1 column for Full Baths & 1 column for Half Baths (see Raw Data.jpg). I want to concatenate the baths to one column and, if there is a 1/2 bath, tack ".5" to the end of the full bath count.
The problem with my formula is that if it concatenates the ".5" to the full bath count number, it converts the format to text (see Current Formula.jpg). I know I can go through later and convert it back to number format but is there a formula I could use that would keep it in number format?
I have generated macro, all I want is when this macro runs on different work sheets it should automatically select the active range based upon column A and copy the formula in the inserted new column B, please see the macro which will make it clear. Basically whenever it is copying a value or a formula it should be for the active range.
View 11 Replies View RelatedOR can I? I get a "Run Time Error '1004' Select Method of Worksheet Class Failed"
Is there anyway around this?
Basically all the sheets are hidden from the user except for the Entry sheet. They input there data on there and then they press a send command button which then needs to copy that information to a hidden sheet. This is where the problem occurs.. Thought maybe their was a way around that or do I need to unhide the sheets during the macro and then rehide them again?
Is it possible to make excel template work only on 1 computer by giving any vba password (on lines of license number).
Aim is to ensure it works on only client computer, even if template is shared outside it becomes useless.(We often see clients audit team getting access to templates using it for thier purpose & distributing).
In same spirit what are best practices one can take like protecting formulas with password etc
Our system can create an SLK file showing customer open orders. It is ALWAYS in the exact same format. I created a macro to open this file, manipulate the data (convert text to numbers, convert text date to actual date, and a few other things) and then make a pivot table.
When I try to run it it gets hung up on the pivot table and the debug highlights the BOLD below:
Columns("F:L").Select
ActiveWorkbook.PivotCaches.Add(SourceType:=xlDatabase, SourceData:= _
"SOLIST!C6:C12").CreatePivotTable TableDestination:="", TableName:= _
"PivotTable1", DefaultVersion:=xlPivotTableVersion10
ActiveSheet.PivotTableWizard TableDestination:=ActiveSheet.Cells(3, 1)
ActiveSheet.Cells(3, 1).Select
The RowField, ColumnField, and Page Fields are correct.
The QTY is the data that goes in the field.
So i got a few macros on a worksheet and one of them is simply :
Sub Pr_Removefilter()
ActiveSheet.ShowAllData
End Sub
Ive worked on the excel a couple of times, everything fine. Then it started crashing upon saving (after changes made that had no possible connection to the macro, on another sheet). After a few painfull trials and errors i located the problem to be this macro button. I erased it, created a new one with the EXACT macro and it works. Why?..
I am trying to develop an Indirect Indirect Validation drop down list. Example, Building - Floor - Room, i.e. Select Building from a Validation drop down list. Then based upon the Building selected, select only the Floors applicable to the Building Selected. I am able to achieve this via an Indirect Validation drop down. However, when I attempt to then select the Rooms applicable to the Floor of the Building I selected, I can not produce an Indirect Validation off a previous Indirect Validation.
In the attachment, I have used Plant - Location - Room. I have name ranged the selections, and have used Validations Lists for Plant, and Indirect Validations for Location. The error occurs where I attempt to do an Indirect Validation for Room.
I have this function that works on line 3 and if the conditions are met, the result is 1
=SUMPRODUCT(--(IfColor(B3,$A$76)*(SUMPRODUCT(--(D3D4)))))
Here how it works, if B3 is the same color as the reference cell $A$76 and D3 is different than D4 then the result is 1
I would like this function to work from line 3 to line 60 and return the total of lines where the conditions are met. I'm thinking of a =COUNTIF function but can't get something to work. If there is a simpler way, it's even better. The IfColor is a function I wrote in VBA,
I have created a very long switch statement, which is too long to be placed in one row in VBA. I have attempted to put a space and underscore at the end of one line and continue the statement on the row below by placing a comma at the start of the second line. VBA will accept my efforts, but when I run the statement in the immediate window, the following error appears.
"Invalid procedure call or argument"
I understand that there are certain rules where I can split a switch statement onto two lines, yet I do not know what they may be.
i need to work out a formula for my spreadsheet which I use to work out cutting lists for timber frames. I need it to work out if the width of a job is for eg 2400mm i need to work out how many timber studs I need so the space between each stud is between 400mm and 500mm and this will need to work for a range of different sizes of frames. I have it written at the moment and it just devides the width by 400 and gives me a amount of studs but it would work much better if it could space them between 400 & 500.
View 4 Replies View RelatedIn a project i am compiling i need to work accurately with times to calculate the work progress of the people in the workshop thus....here goes....
I have in work book #1 (7) sheets mon to fri + complete week + a sheet where all job numbers are collected.
From monday to friday the workmen log their times as a start time and a end time. This has to be then calculated to a total hours:mins spent per job, wich in turn then has to be calculated to a total hours:mins spent per day. And the on the complete week sheet recalculated as a total time worked per week.
I have a spreadsheet on sheet 1 with a list of customers and their information. So on column A I have the customer number (i.e. k968, e37, p528,...), on column B i have the customer's name, on column C the street's name, on Column D the house number, on column E the zip code and finally the city on column F.
Right now there are around 600 customers in this list.
I have made a userform with a combobox in which I want to select an existing customer (pulled from the spreadsheet). On the same userform I have textboxes (customer number, name, street, number, zip, city). When I select a customer in the combobox, I want this customer's info to show up in the textboxes. I want to be able to change the info and hit Next to store the changes in the spreadsheet. When I do not select a customer from the combobox, I want to add new info in the textboxes and hit Next to store this info as a new customer. The userform also has a delete button. Then I select a customer in the combobox, this customer (and it's info) should be deleted from the spreadsheet when i hit Delete. So the spreadsheet is variable in length.
i have a made a macro that copies info to a new sheet now that is working great but if i change the name of the work book it wont work any more so i need the macro to work with what ever name i give the workbook
the current name is
AVERAGE PRICE (update 2009) Mimmos Armico 170809.xls
i have attached the code in notepad ...
I need to figure a way to make to cells with dates equal each other if the
day,month and year are the same but are placed into a cell at different times during the day. "Making Date Now () = (06/29/09) In another cell". Therefore, A1= Now() and E11 = 06/29/09
I have a range of cells in a work sheet "sheet 1 " my objective is to filter this range according to certain criteria (i ve succeeded to do this ) yet what i want to do now is copy this data to another existing worksheet in a certain range .
note :the existing worksheet to which i 'll copy the filtered data has some cells out of the range that i dont want to over write ..
Simply :how to copy a selected range of cells in a work sheet to already existing work sheet in a specific range aswell .
I am want to copy a formula across several work sheet and have the formula always take data from previous work sheet.
2) I am working with this formula =C12+INDIRECT((MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,256)-1)&"!"&"C12")
and it comes from this thread http://www.excelforum.com/excel-gene...orksheets.html. I have included a worksheet attachment that has explanations
I am using these formula
=SUM('18'!N:N)
=COUNT('18'!A:A)
I need to enter the sheet name in cell A1 instead of the sheet number 18 in the formula using INDIRECT for both the formulas.
I have the following formula:
= SUM ('03:08'!D4, '03:08'!E4)
the 01, 02 ... 020 are the names of the sheets. How can I modify the formula so that I can use other sheet names. Name sheets whose cells I want to be myself in C4 and D4. I tried INDIRECT but I don't know for several sheets.
I am using the below formula to return values from a seperate worksheet.
=INDIRECT("'[Test File.xls]Test Data'!A"&A4)
These values are text, numerical and dates. Sometimes there are no dates in the source worksheet to return, and I end up with 00/01/1900.
Is it possible to leave the cell blank if there is no value to return???
I had a stab at trying to nut it out, but it was a Friday afternoon, head was mush, and the pub was calling.