What I want to do: find the four cell that have the same value "99" in belows configurations
A B C D
1 99
2 99
3 99
4 99
A B C D
1 99
2 99
3 99
4 99
Pre-requisite: I would consider myself to be very poor with excel, based on what I've read on this forum and found on my web-searches. I have a worksheet that has a list of data on the left going vertically, then a summary of this data going horizontally across the top. It is not arranged in such a way that transposing the data will do what I want. I am pulling the 5th word out of the title of each block of the vertical data and need to show this word on the horizontal section.
When I use this formula to pull the 5th word: =MID(MID(MID(SUBSTITUTE(A2," ","^",4),1,256), FIND("^",SUBSTITUTE(A2," ","^",4)),256),2,FIND(" ",MID(MID(SUBSTITUTE(A2," ","^",4),1,256),FIND("^",SUBSTITUTE(A2," ","^",4)),256))-2)
I need to increase A2 to A30, then A58 (up by 28 every time) in every instance in that formula. The fill handle increases the values by 1, instead of 28 (even if I do 3 or 4 instances manually) How do I do this? I've run into this problem in other scenarios, and there HAS to be a way to get around it.
I want the first 60 rows of column C to be constant meaning C1, C2, C3, C4..C59 and after 60 rows it should start again with C1, C2, C3.....C59 rather than C60, C61, C62. In other words i+1 but after 60 rows i should be reset to 1 and then again increase by 1. how can i implement these changes
[Code] ......
I am new in extracting data from excel .
There is a report that contains a various amount data, in one cell it describes the outcome in a summary format of how an issue was resolved.
Is it possible to search a cell of summary text that contains a set pattern with letters & numbers i.e."CL900962" then either place a "YES" or "NO" in another cell if found?
The pattern will always begin with letters "CL" followed by 6 digit number.
I currently use a Core2 Duo PC and often max out the both CPU for extended periods when recalculating large (30MB+) spreadsheets.
Wondering if anyone has experience with Quad Core desktop PC's and large files and if there is a noticeable / significant performance improvement with more cores..
Ram doesn't seem to be an issue.
I have Sheet with 40 employees who each proposes their work schedule, so I have to give each Employee access to the same sheet and want highlight and unlock only those cells that specific employee can use.
Each employee has to login from a drop-down (sourced from Sheet.Employee Master), so their unique Employee Number is in "A13" of Sheet.LOGIN
Can I identify the ROW number and then use that ROW number in a macro to highlight and unlock specific Range of Cells in Sheet.PROPOSED SCHEDULE?
---where "Sheet.LOGIN("A13") = (the value in the cell Col A:"row" of Sheet.PROPOSED SCHEDULE)
I have attached a scaled down version of the Workbook.
Following code is scaled down-- this is for Employee 02 who appears on ROW 16 of the sheet. (macro is same for each employee, just uses a different row)
Text configuration - how can I tell a cell to pick up a phrase from one cell, but if that phrase is equal to one particular phrase, then produce a blank.
View 3 Replies View RelatedI have a workbook with several worksheets in it. 4 of them have macros written in them, some do not. I protected each sheet with a password and made it so that users couldn't select any "locked" cells, and did this on ALL the worksheets. I noticed now that, just upon opening the workbook (not running any macros yet), on the sheets with macros I'm able to select locked cells (which is wrong), but the sheets without macros still function correctly. I think that this may have to do with Excel's default protecting arrangement where you can select either locked or unlocked cells. I specifically locked all worksheets with the correct arrangement but every time I open the workbook some of the worksheets default back to Excel's default arrangement. What can I do about this problem? I need this configuration to follow the workbook and not the specific computer it's on. Many users are going to use this, and can't be able to select locked cells. My macros do unprotect and re-protect the sheets to run, and I'd wonder if I can edit these to protect the sheets in a different configuration (which I don't think I can do with regards to being able to select locked cells) but these macros don't even run before this happens, and the worksheet open event doesn't involve any unlocking or re-locking (it just disables the cut and drag-and-drop functions.
View 8 Replies View RelatedI am creating a box CBM optimizing tool at work for shipping our products internationally so that the sales department and logistics can estimate shipping costs and weights with out needing me to physically pack everything in advance. I have broken every product we sell into individual CBM's as well as the boxes that we use to ship. I have also set it up to give a break down of "boxes needed" to accommodate the approximated CBM by box size.
How to create a function that will take that info and calculate which combination of boxes will utilize the available space... In other words, how do i take my break down of the 6 box sizes available, with the "# of boxes needed" data i already have, and have it tell me which combination of boxes will utilize the maximum percentage of space, or leave the least amount of unused space based off of the cumulative CBM being shipped.
Snippet attached:
Capture.PNG
I want a function that identify the row number, where the date in column A is the same of the active row, but the value in Column B is equal to a different text e.g.=”zz”?
View 14 Replies View RelatedA person on this board did this for me with this so far and I need to be able to view more than 16 rows. I would like to view all the rows it finds. I have 62,000 rows on information this far and will exceed 500,000 so you can see my need to see all involved to save hours of sifting through data. I would also like a place up top near the box (column G.H)(3,4,5) another box for me to enter a new number combination to search. Presently I have to go through the data to find the first one which is also time consuming. I would like to be able to put say for example in the area I am mentioning:
2 6
4
2 8
E20 with the series of numbers in tenth, and with five numbers on one cell. Between 01-37. How do I write a formula on column R to identify any repeated numbers from E20 with E21? In the chart it shows number 10 is repeated from E21, so I place a check mark on the same row as E20 on column R.
On column S how do I write a formula to identify numbers within E20 to see if there are any consecutive numbers? On E20 there is none, on E21 there is one 10-11, and column S will let me know if there is a consecutive by placing a check mark.
After looking at other similar post titles I could not find a formula to work exactly proper.
I have attatched a sample of my problem. What I need is for cells E4:J4 to look for a match in cells B4:B16 and give a value of " Yes or No " in cell K4 if a match is found. Then copy down formula through E5:J5 to B4:B16 - E9:J9 to B4:B16. As my examples indicate Cells K4 would = yes, K5 = yes, K6 = yes, K7 = no, K8 = no, K9 = yes. Column D is the results, Columns E-J represents all combinations of column D.
I have tried the following formulas but they did not work entirely correct.
= NOT( ISNA( MATCH($b$4:$b$16, e5:j9, 0 ) ) )
= COUNTIF(e9:j9,"="&b4:b16)>0
I have the following data:
Column A = Date
Column B = Reservations made per day
For ex:
A B
1 3/1/2011 5
2 4/5/2011 10
3 3/8/2011 15
Then I have a look up table where based on the date ranges it assigns a week number.
WeekDATE Range 1Date Range 2
718-Feb-1124-Feb-11
825-Feb-1103-Mar-11
904-Mar-1110-Mar-11
1011-Mar-1117-Mar-11
1118-Mar-1124-Mar-11
1225-Mar-1131-Mar-11
1301-Apr-1107-Apr-11
1408-Apr-1114-Apr-11
1515-Apr-1121-Apr-11
1622-Apr-1128-Apr-11
I am looking for a fomula that would assign a week to the corresponding dates on column A and tha would then add all of the reservations booked for each week.
I am trying to enter this formula in cell B2 and i just wanted to know if there was a better and quicker way to do this. I need to do this all the way to BP however my list can extend however the pattern will stay the same.
Ws.range("B2").value=
F & LROW * D1 +
K & LROW * D6 +
P & LROW * D11 +
U & LROW * D16 +
Z & LROW * D21 +
AE & LROW * D26 +
[code]....
I need to have a string comparison done in a macro,
I have a files with names similar to "TEVT_GURUPRASAD_WEEK08" and a array of strings having names "Guruprasad,AnilKumar,....etc." I Need to match the name in the array and the name in the filename.
The spreadsheet I'm working on is kinda hard to describe, but I'll try.
It's a finance calculator of sorts that I need done, and it shows me the total cost of various products. Each of these products require different components, and numbers of components, and also these components all cost different prices. So what I have is the following spreadsheet setup:
I'm trying to extract specific character from a set of text strings which have irregular patterns. For example:
CJWHCon.D005 - JN Holding Inc Corporate
CUSViWind.D404 - Windows Ringtown Vinyl
My goal is to get only the 'DXXX' which sometimes might be only 'DXX'. I've tried using the following formula but I seem to be going wrong somewhere as I only get 'D'.
=MID(F10,FIND(".",F10)+1,FIND(" ",F10,FIND(" ",F10)+1)-1-FIND(" ",F10))
I'm trying to repeat a pattern which outputs 4 equal numbers and then increments that number by 1 for another four row as follows
1
1
1
1
2
2
2
2
and so on
how to do this?
Need a macro that will autofill in an email pattern from a customer list i recieve. So far i have been having to manually do it.. but when have documents over 3k entries.. ouch.
This is what i got.. hope the way i type it in makes sense
A ..........................B ..........................C
First name........Last Name ............Email Pattern
John ..................Smith ...............First name initial, last name@abc.com
John ..................Smith ...............First name initial, dot, last name@abc.com
John ..................Smith ...............First name, dot, last name@abc.com
John ..................Smith ...............First name, initial of last name@abc.com
Is there a macro i can make that will automatically fill in the email based on the criterea found in column C before the @ symbol? then take the required info from Column a and b?
I am a beginner to VBA and Macros, and I have a fairly complicated macro that I am pressed to make.
I am working with alphanumeric data that is unorganized. Here is an example of what it looks like: ...
I am trying to come up with a formula that will distribute the numbers as shown in this diagram:
To get the value of each number divide 42,000 by the last number in the pattern. For example the fifth column from the left would be 42,000/18. That means that each number would have a value of 2,333.33. By the time you reach the half way mark, nine in that example, you should have around 21,000, and the other 21,000 should be distributed between the last half (block 10 thru 18). The formulas would have to work on all of the patterns. Can anyone think of a way to match the pattern shown? It doesn't have to be exactly the same pattern just as long as the number of blocks remains the same for each half, and they total 21,000 for each half without going over 42,000 all together. There has to be 11 rows from top to bottom.
Is it possible to change the borders/pattern of a single cell so that it looks like the image in the attached document? This may seem a strange thing to want to do, but there is a good reason! Merged cells will not suit my purpose. The pattern palette allows a cell to be filled with horizontal lines, but I need there to be just two lines (i.e. dividing a single cell into three boxes).
View 2 Replies View RelatedI made a code that automatically checks the date and then compares it to the date of the last save. If it is a new date then the colors of the tabs will randomize. It can also be done manually via a button. The problem is that I have now realized that the colors are always have the same pattern. Every day the first color is an orange color, no matter how many times I randomized yesterday...and so on. Is there a way to make the randomness not have a repeating pattern?
Sub MMVII_4_9_b()
Dim NewDate
If Sheets("Scrappaper"). Range("F2") = Date Then
NewDate = 0
Else
NewDate = 1
End If
'Determines whether it is a new day or not
Sheets("Scrappaper").Range("F2") = Date
'Updates the date
If NewDate = 0 Then
'Does nothing if the date is the same
Else
I'm trying to write 'user-defined' function in Excel, that doing following:
Getting two arguments: cell and 'like' pattern (_ _ , *, e.t.c).
As a result returns data that match this pattern.
For example:
1. Cell = "golf car is really comfort", pattern = "_ _ _ _" will return "golf"
2. Cell = "toyota is number one", pattern = " num*" will return "number one"
I am comparing two years' data, one on top of the other (Rows 1 and 2). For each cell in each row, I am referencing a cell from a different tab. This needs to be done with about 290 data items, so 580 rows.
When I attempt to copy the two rows down, it doesn't go in the correct order (skips a cell reference number). It looks like this:
Excel Forum Q.xlsx
It would save me a lot of time considering each of the 580 rows has about 30 different column with each cell referencing various things.
Create a workpattern using something similiar to the Networkdays function. I want to be able to calculate how many working days are between 2 dates if the employee works a non standard Monday to Friday Week. For Example if someone works ever Mon, Tues, Wed how many working days are there for them in June.
I need to perform data mining from a CSV file,and use correlation function to analyse and generate a pattern from the provide data (CSV) for a particular set of error for a given time sample.
Find the CSV file which contains the data which needs to be analysed and generate a pattern.
eventLog_20121205_140322_00000000002119445219.csv
I have a formula such as below..
=SUMIF('MBX TO DBS'!$G$1:$G$818,"*livedb01*")
This will sum the values in G1-G818 that contain livedb01 on the "MBX TO DBS" sheet, however this is not exactly what I want.. I want the SUM function to look for the livedb01 string in G1-G818 and SUM the values in D1-D818.
So instead it would look for livedb01 text in G column and take the value from D and SUM those once the text qualifier was found in G column..
Is this possible with Excel?
I have the following series of formulas consecutively in a single column:
=IF(A3=INDIRECT(ADDRESS(2+MATCH(MIN(H3:H50),H3:H50,0),1)),"YES","NO")
=IF(A4=INDIRECT(ADDRESS(2+MATCH(MIN(H3:H50),H3:H50,0),1)),"YES","NO")
.
.
.
=IF(A50=INDIRECT(ADDRESS(2+MATCH(MIN(H3:H50),H3:H50,0),1)),"YES","NO")
=IF(A51=INDIRECT(ADDRESS(2+MATCH(MIN(H51:H98),H51:H98,0),1)),"YES","NO")
=IF(A52=INDIRECT(ADDRESS(2+MATCH(MIN(H51:H98),H51:H98,0),1)),"YES","NO")
.
.
.
Effectively, I am comparing the values in each set of 47 to determine which one is the smallest. The smallest entry will get a YES label next to it and all others will get a NO. The problem I am having is the the autofill feature is not correctly detecting the pattern, even if I manually fill in the first 49 entries (shown above). If I hilight all of the above entries and autofill one down, I get the following:
=IF(A53=INDIRECT(ADDRESS(2+MATCH(MIN(H53:H100),H53:H100,0),1)),"YES","NO")
It should be:
=IF(A53=INDIRECT(ADDRESS(2+MATCH(MIN(H51:H98),H51:H98,0),1)),"YES","NO")
Basically I need the H:H: reference to stay constant, but only for 47 cells at a time. After that, both the lower and upper bound should increase by 47. Is there any way to indicate this to Excel? Manually typing in the new formula every 47 entries isn't practical because the spreadsheet has thousands of entries. How I can accomplish this using a single formula and autofill?
