Autofill Not Detecting Range Pattern?
Apr 10, 2013
I have the following series of formulas consecutively in a single column:
=IF(A3=INDIRECT(ADDRESS(2+MATCH(MIN(H3:H50),H3:H50,0),1)),"YES","NO")
=IF(A4=INDIRECT(ADDRESS(2+MATCH(MIN(H3:H50),H3:H50,0),1)),"YES","NO")
.
.
.
=IF(A50=INDIRECT(ADDRESS(2+MATCH(MIN(H3:H50),H3:H50,0),1)),"YES","NO")
=IF(A51=INDIRECT(ADDRESS(2+MATCH(MIN(H51:H98),H51:H98,0),1)),"YES","NO")
=IF(A52=INDIRECT(ADDRESS(2+MATCH(MIN(H51:H98),H51:H98,0),1)),"YES","NO")
.
.
.
Effectively, I am comparing the values in each set of 47 to determine which one is the smallest. The smallest entry will get a YES label next to it and all others will get a NO. The problem I am having is the the autofill feature is not correctly detecting the pattern, even if I manually fill in the first 49 entries (shown above). If I hilight all of the above entries and autofill one down, I get the following:
=IF(A53=INDIRECT(ADDRESS(2+MATCH(MIN(H53:H100),H53:H100,0),1)),"YES","NO")
It should be:
=IF(A53=INDIRECT(ADDRESS(2+MATCH(MIN(H51:H98),H51:H98,0),1)),"YES","NO")
Basically I need the H:H: reference to stay constant, but only for 47 cells at a time. After that, both the lower and upper bound should increase by 47. Is there any way to indicate this to Excel? Manually typing in the new formula every 47 entries isn't practical because the spreadsheet has thousands of entries. How I can accomplish this using a single formula and autofill?
View 2 Replies
ADVERTISEMENT
Jun 11, 2013
I want to detect if a cell within a range of cell has been modified
A range of cell is named "ChartData" =Data_In_Out!$E$15:$E$29
I understand how to react for a single cell, but not with a group of cells
Code:
Sub Worksheet_Change(ByVal Target As Range)
On Error Resume Next
If Target.Address = Range("LastBarString").Address Then
Application.EnableEvents = False
...
...
end if
View 2 Replies
View Related
Jan 31, 2007
Pre-requisite: I would consider myself to be very poor with excel, based on what I've read on this forum and found on my web-searches. I have a worksheet that has a list of data on the left going vertically, then a summary of this data going horizontally across the top. It is not arranged in such a way that transposing the data will do what I want. I am pulling the 5th word out of the title of each block of the vertical data and need to show this word on the horizontal section.
When I use this formula to pull the 5th word: =MID(MID(MID(SUBSTITUTE(A2," ","^",4),1,256), FIND("^",SUBSTITUTE(A2," ","^",4)),256),2,FIND(" ",MID(MID(SUBSTITUTE(A2," ","^",4),1,256),FIND("^",SUBSTITUTE(A2," ","^",4)),256))-2)
I need to increase A2 to A30, then A58 (up by 28 every time) in every instance in that formula. The fill handle increases the values by 1, instead of 28 (even if I do 3 or 4 instances manually) How do I do this? I've run into this problem in other scenarios, and there HAS to be a way to get around it.
View 5 Replies
View Related
Sep 17, 2013
Currently my Macro should: Turn off any filtersNumber column A from 1 to 1000 (starting in A14)Drags formula from K14-O14 down to last row of data shown in column Athen puts cursor in last empty cell in column B ready for user to enter data
On point 3 - I want the range to be K14-O14 if active worksheet equals "EXCHANGES" but if its on the "VALUATIONS" tab the autofill range should be L14-P14
I have found bits and pieces of macros on the internet and put them together so if my macro below is not the most effective for my needs but here it is in it's current state:
Here is my macro:
Sub AddNewEntry()
'TURNS OFF FILTER IF FINDS ONE ON
Dim wks As Worksheet
[Code]....
View 8 Replies
View Related
Feb 19, 2010
I am trying to write a macro which will autofill specific columns. The macro will set the range from the start of my autofill to the end of my autofill as a constant range.
The problem I need to get around is the end of my range can always change each time I run the macro. For instance, the first time I run the macro I may only need to autofill from row 4 to row 15. The next time, I may only need to autofill from row 4 to 23 (because of user updates). How can I make the end of my range not be a constant address but variable?
View 6 Replies
View Related
Sep 27, 2013
I have multiple worksheets each with varying amounts of data. I have a number in cell A1 that I need to autofill down to the bottom of each worksheet. All of which have varying amounts of data.
RA-0151
0
765804
3308345
168
0
5.74E-07
8.8E-09
1.371696
0
0
[Code] ........
When I record a macro it sets the autofill range as the bottom of what ever worksheet I recorded it on.
How can you write a macro that goes to the last row of each worksheet.
Sub Macro1()
'
' Macro1 Macro
'
' Keyboard Shortcut: Ctrl+a
'
Range("A1").Select
Selection.AutoFill Destination:=Range("A1:A122"), Type:=xlFillCopy
Range("A1:A122").Select
Range("B1").Select
End Sub
View 2 Replies
View Related
Mar 24, 2014
I am trying to autofill cells across a column that sum a range but move over 5 columns from another worksheet. for example, i want to take this range:
Schedule!AG6:AK6 and when I autofill, the next adjacent column will fill with Schedule!AL6:AP6, the next with Schedule!AQ6:AU6, and so on.
I have tried offset, but am not sure if that's the right formula.
View 5 Replies
View Related
Jan 4, 2008
I am using the following code to Autofill a formula through a variable range:
Selection.AutoFill Destination:=Range(MyFormulaCell, TerminalCell), Type:=xlFillDefault
MyFormulaCell is the cell with the formula, and TermnialCell is a variable set on a count of rows. This is working great, and I can loop through this for the columns I need to copy just fine by incrementing values, but as I apply this to several sections, it's taking me up to a minute to run the macro. In this "I want it now" day and age, I'm sure my coworkers for whom I am making this will not be happy to wait that long.
Is there a way that I can incorporate a selected range into this method?
I'd like to set MyFormulaCell to:
Range(Selection, Selection.End(xlToRight)).Select
and then autofill the formula down the number of rows contained in TerminalCell.
View 9 Replies
View Related
Nov 1, 2006
I have worksheets that refernce values in one column off columns in others and do this on daily basis. each day there are blank amounts in random fields which I inturn use a macro to delete rows with blank amounts
I then want to autofill the numbers from 0001 to the bottem line of the sheet where the word "END" always is, as the position of the end word is random each time and autofill always needs a definite range how do I get my macro to autofill down to the word "end" ?
here is the code that doesnt work for me and I've been trying to fix
Sub Macro1()
For counter = 1 To 30
Set curCell = Worksheets("Sheet1").Cells(counter, 6)
If curCell.Text = "END" Then Range(Cells(1, 6), Cells(counter-1, 6)). _
Selection.DataSeries Rowcol:=xlColumns, Type:=xlAutoFill, Date:=xlDay, _
Trend:=False
Next counter
End Sub
View 3 Replies
View Related
Oct 12, 2007
I am creating a loop that will autofill 16 cells down. It copies the formula from one cell (Z230), pastes that 16 cells down (cell Z246), then changes the lock properties of the cell (Z246) before autofilling down 16 (to cell Z261). At which point the loop starts over again. (copies cell Z246,pastes it to Z262, fills down 16 , etc)
Because the cell I am copying from changes in each loop, I set a variable to grab the address of the starting cell and last cell of the copy.
I then put this into a String so it would return something like this
Range("Z245:Z259")
Problem is I get extra quotes around Range("Z245:Z259") - it comes out as string "Range("Z245:Z259")"
This gives me a problem when I try to replace
Selection.AutoFill Destination:=Range("Z245:Z246"), Type:=xlFillDefault
with
Selection.AutoFill Destination:=rangevariable, Type:=xlFillDefault
Below is my total code, but I get stuck on the selection line. I have to do this 300 times so I would prefer not to do it manually!
View 9 Replies
View Related
Jan 26, 2008
I have 2 sheets - 1st sheet holds the data that is updated periodically. 2nd sheet pulls the data into A2:k2 and formats it for importing to another program. I need a macro that will copy the data from A2:K2 and auto fill down all rows from sheet 1 that contain data. I have read previous threads for autofill with no success using my below code.
Sub FillDownToLastUsedCell()
Sheet 'RawDataA2:K2' Range("A2:K2", Cells(Rows.Count, "Sheet 'RawData'A2:K2").End(xlUp)).FillDown
End Sub
View 6 Replies
View Related
May 12, 2009
I would like to be able to use autofill from a vertical range to a horozontal one. In the example, if you click and drag on cell "R3" (=M3) it samples to cell dirrectly below it "M4", when I want it to sample the cell M6, M9 ect,ect. Is there a way to program the autofill to skip cells?
View 2 Replies
View Related
Jun 16, 2009
I need to autofill a range of formulas (A2:O2) but the actual range to fill up depends on the range of data on sheet1. I've managed to use:
View 4 Replies
View Related
Jan 14, 2014
I am trying to write some code that keeps throwing me the error message "Autofill method of range class failed". But I cant understand why, I think it may have something to with my range notation:
Code:
Sub SummariseSheets()
'collates individual client development data from consultant
'worksheets and compiles in one sheet on summary page
[Code]....
The error is in the "Selection.AutoFill Destination:=("C" & LR & ":C" & LR2), Type:=xlFillDefault" line, however I cant figure out why? The code essentially takes a section of data from multiple worksheets, then pastes it onto the summary page. It then adds the name of the sheet the data has come from into column C next to the relevant rows.
View 2 Replies
View Related
Jul 1, 2009
In a macro - how can you copy a cell and keep a data range absolute?
In the statement below, the range denoted by: DATA!RC[-52]:R[829]C[-52] is D2:D829. When I use the macro to Autofill using the following:
(Selection.AutoFill Destination:=Range("BG2:BG220"), Type:=xlFillDefault)
the range progresses. I need to have the range as an absolute.
Sheets("Report").Select
Range("BG2").Select
Selection.FormulaArray = _
"=SUM((DATA!RC[-52]:R[829]C[-52]=""APPOINTMENT"")*(DATA!RC[-55]:R[829]C[-55]>=Report!RC[-1])*(DATA!RC[-55]:R[829]C[-55]
View 9 Replies
View Related
Jul 30, 2012
How can I auto fill a range while leaving the cell number the same?
Code: =IF(AND(B4>=c2,b4=c2,b4=c2,b5=c2,b6=c2,b7=D2,b4=E2,b4=F2,b4=G2,b4=H2,b4
View 7 Replies
View Related
Jan 23, 2013
Excel 2010
I have this code in a macro, the range will change as more data is added. so that I dont have to keep changing the range. How can I have this code autofill from the activecell to the last cell that has data in column M.
Selection.AutoFill Destination:=ActiveCell.Range("A1:A50000")
ActiveCell.Range("A1:A50000").Select
View 7 Replies
View Related
Nov 25, 2008
I recorded one for an autofill series which basically came out as
View 4 Replies
View Related
Oct 2, 2009
For our attendance register, the master data table holds a list of all club members (one member per row).
The master data table consists of formula columns, data columns, and two data columns with drop-down list validation.
I'm using this
View 2 Replies
View Related
Dec 30, 2011
I want to have a range of days in a cell, for example in cell A1 will have may 2-may 9. when I use the autofill handle I want A2 cell to read may 10 - may 17 and then if I use it again A3 will read may 18- may 25 and then roll over to the next month . As it stand right now if I put in may 2 - may 9 and use the autofill handle the next cell down will read may 2 - may 10.
View 2 Replies
View Related
Mar 26, 2014
As part of a larger Macro I have the following Code:
Range("X2").Select
ActiveCell.FormulaR1C1 = "=IF(RC[-1]>0,""Yes"",""No"")"
Range("X2").Select
Selection.AutoFill Destination:=Range("X2", "X" & lastRow)
Range("X2", "X" & lastRow).Select
Selection.Copy
The code works fine when I have more than two rows of data that I am manipulating but gives me an Run Time Error - AutoFill Method of Range Class Failed at the following line:
Selection.AutoFill Destination:=Range("X2", "X" & lastRow)
When I have only one row of data I get the Run time error.
Any code that will allow me to process the data if I have one row of data as well.
View 4 Replies
View Related
Jul 30, 2009
Copy and paste the formula into a range or paste a formula into the first cell in the range and autofill down for remainder of cells?
P.S. when autofilling down, can I specify somehow for it to stop at the last row with data in adjacent cell?
View 9 Replies
View Related
Oct 26, 2009
I found the following code on your forum, but get the following error:
Run time error '1004'. Autofill method of Range class failed.
The error occurs when the spreadsheet either have 1 row of data completed or no data, can I get code to ignore the autofill when I only have 1 row or no rows completed in various spreadsheets. I have attached a copy of the spreadsheet.
View 2 Replies
View Related
Feb 17, 2010
I am trying to autofill a range of cells in column L (12). I first copy the formula and add an equal to (=) sign to it. then this is copied to cell L14 (The first cell of the intended range).
After this I find out the last filled row (using FOR loop and a counter 'c').
After this I use the Autofill option but I get an error.
Run time Error '1004':
Autofill methodof Range class failed
View 2 Replies
View Related
Jul 31, 2009
Sub ResetMacro()
Range("G26").Select
ActiveCell.FormulaR1C1 = "=Template!RC"
ActiveWorkbook.Sheets("Template").Range("G26:AE86").Copy
ActiveWorkbook.Sheets("Portfolios").Paste
Selection.AutoFill Destination:=Range("G26:AE36"), Type:=xlFillDefault
Range("G26:AE36").Select
Selection.AutoFill Destination:=Range("G26:AE86"), Type:=xlFillDefault
Range("G26:AE86").Select
End Sub
RunTime Error 1004: AutoFill method of range class failed
Takes me to the code and highlights in yellow the line in bold.
View 9 Replies
View Related
Jul 31, 2014
The macro I'm writing (Excel 2010) is a loop that inserts a column based on a variable location, enters in a formula in the first cell, enters another formula in cell 2, then should fill that second formula to the last row, then keep going until the loop ends. There is always a chance that there will be blank cells to the left and right so I didn't use xldown. I've tried writing in multiple ways, but I keep getting the error.
Code:
Sub colfrmadd()
Range("A1").CurrentRegion.Select
colcnt2 = Selection.Columns.Count
[Code]....
View 1 Replies
View Related
Feb 5, 2009
Is there a way of detecting, when printing, that a cell is at the top of the page?
I am not talking about the automatic "Rows to repeat at top" option on Page Setup; I have programmatically suppressed repeating information in Column A but I want to repeat that information if the column is fed to a new page.
View 2 Replies
View Related
Mar 11, 2009
Would like to detect same value in 3 cells.
Q 16, R 16, S 16
If there is a same value appearing in two of the three cells.
View 11 Replies
View Related
Mar 15, 2007
I've written a macro to copy data from a series of columns on one sheet and past it on another sheet in a specific way. However, what I really want to do, is write the macro so it automatically detects what the last column is, either by defining a range consisting of the last column, or by writing "Last Column" in one of the cells of the column, and having the macro detect it.
Dim i As Variant
For i = 5 To 56
' What I want to do is have the second number be the last column, instead of 56.
Sheets("MASTER").Select
Selection. AutoFilter Field:=i, Criteria1:=">0", Operator:=xlAnd
Range("Basic_Data").Copy
Sheets(" Consolidate").Select
ActiveSheet.Paste
ActiveCell.Offset(0, 4).Range("A1").Select
Sheets("MASTER").Select...........................
View 5 Replies
View Related
Oct 1, 2006
In my company we have many spreadsheets with sections that contain formulas, which may be overwritten with "hard coding", manually entered constants, in certain situations.
Is there a way I can detect the differences between the two types of cells? I would like to setup conditional formatting that would highlight constants in a table that would generally only contains formulas.
View 14 Replies
View Related
