I am using the following formula and am getting a return of "0" when the cell it looks at is blank instead of a "-".
=IF(E2>1/25/80,'JOB LOG IN'!$I2,"-")
Why is that and what can I do to fix it? It is a date by the way.
Each row represents a call. If a call in column A equals "CW" and it has the highest duration (H:MM:SS) value in column B, then provide me the date (MM/DD/YYYY) for that call that is stated in column C.
i.e.
Column A --- Column B ---- Column C
AB ------------ 0:02:22 ----- 04/14/2007
CW ----------- 0:03:13 ----- 04/16/2007
CW ----------- 0:01:42 ----- 04/13/2007
Thus, the value that should be returned is "04/16/2007".
I have 2 sets of criteria, column B and D, both are ranked in column C and E respectively.
Cell h2 and h3 have the minimum requirements so I essentially want to add onto the RANK formula I have so if a person does not meet the minimum rank cells will return a null value.
creating a formula that will give me a result of either "W" or "L" depending on the amount in corresponding cell.
View 9 Replies View RelatedI want to use an IF statement that returns 3 values. I can do it to return 2.
Example: I am measuring performance of individuals. If they deliver below 50% I can return the value "Needs Improvement". If they deliver Over 60%, I need to show "Excellent" and finally if they deliver between 50% & 60% I need to return the value "Good".
I am not sure how to show 3 values.
I am working with data that has numeric values in columns S, T and U. In column M I want to return the header of the column that has the largest value (S,T or U).
Here is the formula I am trying to use:
=IF(OR(S2>T2,S2>U2),$S$1,IF(OR(T2>S2,T2>U2),$T$1,IF(OR(U2>S2,U2>T2),$U$1)))
The problem is that it only sometimes works properly. I have found instances where the value in column T is greater than S and yet column S's header is still returned. What am I doing wrong?
IF the first letter (i.e. left most letter) in any of the cells in range F7:F17 is "R", return its content to cell L3 and put a line break between each (i.e. create a list within a single cell).
I've read line breaks can be put in by using &CHAR(10)& but can't get a full formula to work.
I am attempting to return a value in a table using an IF statement, but without referring to other values in the table.
My first column contains price break quantities;
5
10
20
50
70
100
The top row contains selling quantities;
1410192541517699105
The IF statement should return a "Y" in the cell if the value in the top row is greater than the value in the first column, but only for the relevant price break, i.e. the column with 51 in the first row should only have a "Y" in the row with 50. This would be much easier if I could work out how to post the workbook!
The formula cannot refer to other row values (otherwise it would be easy), and cannot use VB.
So far, I have come up with;
=IF(AND($C6
When I tried using if & or statements I got an error - so I tried this:
=IF(K7="&","V,",""),IF(K7="1 Space + &"," V,","")
I want to return 'V,' if cell='&' or if cell='(space)&' I want to return '(space)V,' What is wrong with this statement..?
not sure if an "IF" staement is appropriate?
I have 3 columns containing data:
column A has text in it,
example: A2="red", A3="green", A4="blue"
column B has 3 letter month in it and they could have repeats
example: B2="Jan", B3="Feb", B4="Jan"
C2="Jan"
in D2 list anything column A that matches C2
example: D2="red, blue"
In column D I have an Expiry Date and in column E I put formula “=IF(D2<=TODAY()+90,"we have less than 90 days!!!","we have more than 90 days")” the formula works fine but my problem is I need formula if item have expired in column D its have to say in column E “ ITEM EXPIRED “ or something. I highlighted line in yellow below attached sheet.
View 4 Replies View RelatedI can't seem to get this If statement to return an empty cell It returns 0
HTML Code:Â
=IF(+B7+C7="","", +$C$3-B7+C7)
The formula will go in D7
If either B7 or C7 is empty, leave D7 empty
If either B7 or C7 has a value, add or subtract from $C$3
I'm working on a spreadsheet where I need to return the column header where the value in that row matches the criteria from an if statement.
The column headers are departments, the row headers are customers numbers, the values show the % of items sold in that department as a % of the total purchases by that customer.
I need to make a formula for each row so that if the % in any of the current row's values is 75%-100% then get the column header for the column that value is in.
I know it's an IF statement, but I don't know how to return the column header for the value when the if statement is true.
I know that if true the following formula would return a 1
=IF(I7= 500000 and if I wanted to return a 2 if the cell value was greater than 500000 but less than or equal to 1000000
I wan to set up an IF statement so that if the date in Column A is between 4/28/14 and 7/17/14, it will return "Q3" and blank if no date.
View 1 Replies View RelatedI have a problem with finding the right function. My goal is to have the following function...
The cell D1 has the following function: [=IF(B1<=C1;"YES";"NO")] But I would like to have the cell D1 to be left blank, if the cell A1 is blank.
I have data that has months in it that are spelled wrong and in different formats etc. I need to be able to search the range of data I have created in a separate table in order to return the correct abbreviation into my spreadsheet. See below:
Need to be able to search this range (A1:E12) and return the corresponding horizontal value in the last column (Jan, Feb, Mar)
JanuaryJanuraryJan-11JanJan
FebruaryFebruraryFeb-11FebFeb
MarchMarchMar-11MarMar
AprilAprilApr-11AprApr
MayMayMay-11MayMay
JuneJuneJun-11JunJun
JulyJulyJul-11JulJul
AugustAugustAug-11AugAug
SeptemberSeptemberSep-11SepSep
OctoberOctoberOct-11OctOct
NovemberNovemberNov-11NovNov
DecemberDecmberDec-11DecDec
I am currently trying this, but its not working! =IF(F2="","",VLOOKUP(F2,Dates!$A$1:$E$12,5,TRUE))
Column A consists of cells with a variety of five digit numbers. My formula needs to return a text value if numbers are present in column A, this is what I tried:
=if(A1="","Chassis") but it returns "False" instead of "Chassis".
OK i have put the membership cards on the same sheet as my raw data so to make the formulas easier. On the membership card i have under membership level i have the formula : =VLOOKUP($J$3,A:E,4,FALSE)
there is 3 types of level bronze, silver and gold
what i would like is if the level is gold after then an image to be placed in the cell rather than the word gold and a different image for silver and a different image for bronze.
How would i wrte this formula correctly?
=IF(SUM(I5:J26))-(SUM(D5:E26))>=0,0,(SUM(I5:J26))-(SUM(D5:E26)
It needs to say if the sum of the two cell ranges is less than or equal to zero then display as zero, otherwise display the answer
I have an IF statement that I need to look at different cells and return different values if ture or false, depending on what is selected in cell J2
Cell D2
if J2 = "FMB/FPI" then retrun the value of cell Y7
if J2 = "FPI/FPI" then N/A
if J2 = "FMB/OTHER" then return the value of cell Y7
Cell E2
if J2 = "FMB/FPI" then retrun the value of cell AC7
if J2 = "FPI/FPI" then then retrun the value of cell AC7
if J2 = "FMB/OTHER" then N/A
Cell F2
if J2 = "FMB/FPI" then N/A
if J2 = "FPI/FPI" then N/A
if J2 = "FMB/OTHER" then then retrun the value of cell AC7
Is it possible to return a value, via an IF statement, depending on the font style of a cell?
What I want to do is this...Check to see if a the font in the cell has a strikethrough, if it does, return 0, else return the value in the cell.
I am trying to write a formula that will return a statement if a certain month is contained in the text within another cell. Formula is =IF(ISERROR(SEARCH("Dec",Assumptions!B2)),"Ensure Journal is Non Reversing","")
Cell B2 contains a date in the format of Dec 08, so if this date contains Dec, then return "Ensure Journal is Non Reversing", if it doesn't then leave the cell blank.
At the moment it is putting in the first test for every month I select and not changing to blank.
I am currently using an Intersect statement in a worksheet module to perform two things:
1. Insert a time stamp into row 2 when row 1 has a price inserted
2.To clear that time stamp if the price is deleted at some later date.
My problem is with the time stamp value being deleted by the user.
If I try to clear the price (now that the time cell =empty) I get a Runtime error 91 - Object Variable or With block variable not set.
I would like to convert this code to a select case statement but I'm not sure how to do this in this situation. Would error coding be appropriate in this instance?
I'm trying to set up an if statement that will recognize that if a cell is FHR it will do something...but if it's PHR it will do something else. I think I found the place where I keep getting an error but I'm not sure how to go about fixing the issue.
View 2 Replies View RelatedI am attempting to use a previously Set variable as part of the next Set statement, pretty unsuccessfully at present.
My purpose is trying to look up
Code:
tb_SelJobID.Value
from a userform in Col Z then look across the row to Cols D,I,N,S & W (different types of work) to see if
Code:
TbSelYr.Value
matches the year selected then insert a formula in the row to the left. Then loop down to the FinalRow.
Currently my Set Found1 statement does not recognise my Found10 value. I know it will be my syntax as it always is. I have cut down the following code to display where the problem areas are, Found1 thru 5.
Code:
Sub CmdGo3_Click()
Dim Row As Range
Dim FinalRow As Long
Dim Found1, Found2, Found3, Found4, Found5, Found10 As Range
Application.ScreenUpdating = False
[code]....
Windows 7 with Excel 2010
I have an Excel Sheet which I use as Database. The database has 11 columns and I insert data with the following function:
Code:
Sub testInsert()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim i As Integer
Dim strTest As String
strTest = "test"
[Code] .......
Now I want to retrieve this data. i.e. I want all F1 where F2 and F3 are 0 AND I want them ordered descending. I'm trying to achieve this with:
Code:
Sub testSelect()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim mrs As New ADODB.Recordset
Dim strTest As String
strTest = "test"
[Code] ....
The result I am getting looks like this:
9
8
7
6
5
4
3
2
15
14
13
12
11
10
1
I assume, that the data is interpreted as String instead of an integer. But I explicitely stated the data as Integer when storing the data into the DB.
I have created a very long switch statement, which is too long to be placed in one row in VBA. I have attempted to put a space and underscore at the end of one line and continue the statement on the row below by placing a comma at the start of the second line. VBA will accept my efforts, but when I run the statement in the immediate window, the following error appears.
"Invalid procedure call or argument"
I understand that there are certain rules where I can split a switch statement onto two lines, yet I do not know what they may be.
I am looking to have one formula containing two If Statements that minus.
=IF(B6="investment",C6,0)-IF(B7="gross",C6,0)
So the result of If Statement 1 minus the result of If Statement 2.
What I am seeing at the moment in the cell is FALSE and what I want to see is the sum.
If A1 shows 10:00am and A2 shows 4:00pm, then A3 calculates the total number of hours: =(A2-A1)*24
But if A1 shows "Off," then A3 shows 0: =IF(A1="Off",0,(A2-A1)*24)
Now, if I want to change "(A2-A1)*24" to another if-statement, how do I do this? I can always set up a hidden cell (A4) that contains the results of the first if-statement, and then say: =IF(A1="Off",0,A4). But can I do this without going through all the trouble of setting up hidden cells?