I'm having trouble with separate a text string.
The first part of the text is in all uppercases and the latter part is in lower cases as seen below.
PLAVIX BLOOD THINNER RXNo Title Assigned - #588303
I have to separate PLAVIX BLOOD THINNER RX and No Title Assigned - #588303
into 2 separate columns from that one column.
Is there a faster way of doing that than doing it manually?
Is there an If statement for that?
Is it possible to do a true/false check for lowercase letters in a cell?
View 4 Replies View RelatedI have a column of cells, some blank, some containing just numbers, some containing just letters, some containing numbers preceded by the the letter 'p'
E.g.
frt
34.2
36
p34.5
In the cells containing the number preceded by the 'p' - i would like to remove the 'p' leaving just the number, with all other cells remaining unchanged.
I can use find and replace to remove the following, however as I would be doing the same process numerous times it would be very tedious.
I would like 2 VBA scripts.
1 - replace the following letters (uppercase & lower) in Column A and C replace A, V, N, Z, X, Q
so if it finds A it would remove A from the cell.
The cells may contain other letters including these one's i.e
A123XCB235 or
123VBN7779A
2 - The second independent code would replace the characters replace A, V, N, Z, X, Q with P, M, L, R, J, H ie. A becomes P, V becomes M etc...
Again the cells may contain other letters including these one's i.e
A123XCB235 or
123VBN7779A
I have a list of about 1,400 numbers ranging in different lengths. What I'm trying to accomplish with a formula is to remove the single letter at the end of each number (not all numbers have them) and in addition to removing all zeros at the beginning of the number (again not all numbers have them).
Here is an example...say I have the following 5 numbers:
8014554
45678456
87451245
0008014554b
0008014554c
And what I need my formula to do provide is the following results instead:
8014554
45678456
87451245
8014554
8014554
So far I have started with the following =LEFT(A1,LEN(A1)-1), but that will always remove the last character (number and letter).
How to remove a "-" out of first two letters of a sentence. if there is a "-"
for example:
BEFORE: Red-Blue Shirt With Ribbon
AFTER: Red Blue Shirt With Ribbon
However, if there is not a "-" in the first two letters then it not change anything.
For example --nothing changes:
BEFORE: Red Blue Shirt With Ribbon
AFTER: Red Blue Shirt With Ribbon
I would like to take the below strings and remove any numbers and just leave letters. Or extract the payee from the string. If at all possible, I'd prefer this in a formula.
Card Purchase WAL Wal-Mart Sup 320004 0532 WAL-SAMS CENTRAL LA
Card Purchase WAL-MART #0532 053201 308 N AIRLINE HWY CENTRAL LA
Card Purchase LEBLANC'S FOOD S 874301 209 S. AIRLINE HWY CENTRAL LA[code]....
Basically, (the first line above) I'd like to remove the words "Card Purchase" and any numbers...or preferably just leave "Wal-Mart Sup" instead of the full string. I'd like the product of the first line to match the product of the 2nd line.
how to add/remove criteria to a COUNTIFS statement, based on the value of a VBA UserForm Checkbox.
All of the criteria for the checkboxes are based out of the same column. Here is the similar code I currently utilize for my checkbox filter.
[Code] ..........
The code hides fields within a collumn based on the tag within the checkbox's properties. Now I am trying to create an addition that will add criteria to a CountIf formula in real time.
Is it possible to convert to lowercase all words unless a word has two or more consecutive capitals or two or more consecutive capitals followed by fullstop?
I.e.
This Is a Test (TIT)
This Is a Test (T.I.T.)
Αυτό Είναι Δοκιμή (ΑΕΔ)
Αυτό Είναι Δοκιμή (Α.Ε.Δ.)
should become
this is a test (TIT)
this is a test (T.I.T.)
αυτό είναι δοκιμή (ΑΕΔ)
αυτό είναι δοκιμή (Α.Ε.Δ.)
I have in the first column something like this:
GLOBAL DESCRIPTION
GLOBAL DESCRIPTION1 Particular description1
GLOBAL DESCRIPTION1 Particular description2
GLOBAL DESCRIPTION2
GLOBAL DESCRIPTION2 Particular description1
GLOBAL DESCRIPTION2 Particular description2
I want to to have in the second column:
GLOBAL DESCRIPTION1
Particular description1
Particular description2
GLOBAL DESCRIPTION2
Particular description1
Particular description2
So far I have this: +IF(EXACT(A1;UPPERCASE(A1));A1;+RIGHT(A1;LEN(A1)-(FIND(X;A1;1)-1)))
X standing for the position of the first lowercase, which I don't know how to get.
I am using the following code behind this sheet. In row 9 and column D if I put a lower case letter i want to convert it to uppercase automatically can you see what I am doing wrong.
Private Sub Worksheet_Change(ByVal Target As Range)
'Debug.Print Target.Text & " " & Target.Value & " " & Target.Value2
Dim vVal
'If Target.Cells.Count > 1 Then Exit Sub
If Intersect(Target, Range("C9:D28")) Is Nothing _
And Intersect(Target, Range("G9:H28")) Is Nothing _
And Intersect(Target, Range("K9:L28")) Is Nothing _
And Intersect(Target, Range("O9:P28")) Is Nothing _
And Intersect(Target, Range("S9:T28")) Is Nothing _
And Intersect(Target, Range("W9:X28")) Is Nothing _......
Formula that will convert uppercase words longer than three letters, into lowercase. Leaving the rest of the string unchanged?
For example,
Mary and John at IBM thought this was a GREAT OPPORTUNITY. Becomes:
Mary and John at IBM thought this was a great opportunity.
I have also tried using more func's REGEX.SUBSTITUTE but I couldn't get that to work either!
Is it possible to have this type of case sensitive sorting (first all words beginning with a capital later and then all cells beginning with a lowercase letter):
A
B
C
D
E
F
G
a
b
c
d
e
f
g
I have created a text convertor which will convert any text into upper case or lowercase (not very complex but very handy!) Is there anyway way that when text is in uppercase and I convert it to lower case that it makes every character after a full stop in upper case
Example
DAVID WAS NOT WELL. HE WENT HOME
to
David was not well. He went home
I currently get
david was not well. he went home.
combine 2 cells containing text the convert all to lowercase
i.e. in say A1 John, B1 Smith
convert this to c1 johnsmith
this is to me used as a user name generator
then in cell d1 create a 5 digit unique number (password)
Is there a way to get Excel to automatically change the first letter of single word entry to lowercase in each cell of the first row of my worksheet leaving the case the same for all other letters?
View 5 Replies View Relatedi have a list of 2000 fields which have the same format IE "AB10014"
I need to remove the "AB" from every field and leave the #.
Besides putting a space and running text to columns I'm not sure how.
I have words in cell range (i.e. A1:A1000) and I want them to became upper letters.
Excel forum to EXCEL FORUM
how can I seperate small and big letters from one collumn, example:
NAME
name
NAME
NAME
name
name
Is there a VBA command to get the letters, instead of the numbers, of the column of a selected cell?
I have to letter a list whihc means setting up a loop using character codes.
I may have to go into double letters so I am working on how I would set up the loop for if and when it gets past 90 and starts on double letters. so far the highest is the letter "U"
of course the easiest would be to pick up a column value as a letter
NT values do not get a number
A_____ _____NT###
B_____1_______C####
C_____2_______RMK###
D____ _______NT####
i am guessing the loop might involve some arithmetic test between the count and the character set 65-90. or maybe a mod thing.
I am currently using an Intersect statement in a worksheet module to perform two things:
1. Insert a time stamp into row 2 when row 1 has a price inserted
2.To clear that time stamp if the price is deleted at some later date.
My problem is with the time stamp value being deleted by the user.
If I try to clear the price (now that the time cell =empty) I get a Runtime error 91 - Object Variable or With block variable not set.
I would like to convert this code to a select case statement but I'm not sure how to do this in this situation. Would error coding be appropriate in this instance?
I have found a very useful UDF for removing non-alpha characters from strings. (See below, Credit for posting to Stanley D Grom - Ozgrid post ΄Removing Non-alpha Characters From Text΄).
Option Explicit
Private Function RemoveCharacters(InString As String) As String
Dim intLoopCounter As Integer
Dim intStringLength As Integer
Dim intASCIIVal As Integer
intStringLength = Len(InString)
InString = LCase(InString)
For intLoopCounter = 1 To intStringLength
intASCIIVal = Asc(Mid(InString, intLoopCounter, 1))
If intASCIIVal >= 97 And intASCIIVal <= 122 Then
RemoveCharacters = RemoveCharacters + Mid(InString, intLoopCounter, 1)
End If
Next intLoopCounter
End Function
Two requests:
1. Could the UDF be modified such that any part of a string contained within brackets is also removed (e.g. "NLGA High Street (West-Enfield), EN6" becomes "nlgahighstreeten")?
2. Can an argument be added to the format of the UDF, such that numbers (0 to 9) are either included or excluded (e.g. RemoveCharacters(A1,1) where the argument ΄1΄ would include any numbers (0 to 9), so "NLGA2003 High Street (West-Enfield), EN6" becomes "nlga2003highstreeten6")? ΄blank΄or ΄0΄would exclude these numbers, i.e. would return "nlgahighstreeten"
I'm trying to set up an if statement that will recognize that if a cell is FHR it will do something...but if it's PHR it will do something else. I think I found the place where I keep getting an error but I'm not sure how to go about fixing the issue.
View 2 Replies View RelatedI am attempting to use a previously Set variable as part of the next Set statement, pretty unsuccessfully at present.
My purpose is trying to look up
Code:
tb_SelJobID.Value
from a userform in Col Z then look across the row to Cols D,I,N,S & W (different types of work) to see if
Code:
TbSelYr.Value
matches the year selected then insert a formula in the row to the left. Then loop down to the FinalRow.
Currently my Set Found1 statement does not recognise my Found10 value. I know it will be my syntax as it always is. I have cut down the following code to display where the problem areas are, Found1 thru 5.
Code:
Sub CmdGo3_Click()
Dim Row As Range
Dim FinalRow As Long
Dim Found1, Found2, Found3, Found4, Found5, Found10 As Range
Application.ScreenUpdating = False
[code]....
Windows 7 with Excel 2010
I have an Excel Sheet which I use as Database. The database has 11 columns and I insert data with the following function:
Code:
Sub testInsert()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim i As Integer
Dim strTest As String
strTest = "test"
[Code] .......
Now I want to retrieve this data. i.e. I want all F1 where F2 and F3 are 0 AND I want them ordered descending. I'm trying to achieve this with:
Code:
Sub testSelect()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim mrs As New ADODB.Recordset
Dim strTest As String
strTest = "test"
[Code] ....
The result I am getting looks like this:
9
8
7
6
5
4
3
2
15
14
13
12
11
10
1
I assume, that the data is interpreted as String instead of an integer. But I explicitely stated the data as Integer when storing the data into the DB.
I have created a very long switch statement, which is too long to be placed in one row in VBA. I have attempted to put a space and underscore at the end of one line and continue the statement on the row below by placing a comma at the start of the second line. VBA will accept my efforts, but when I run the statement in the immediate window, the following error appears.
"Invalid procedure call or argument"
I understand that there are certain rules where I can split a switch statement onto two lines, yet I do not know what they may be.
I am looking to have one formula containing two If Statements that minus.
=IF(B6="investment",C6,0)-IF(B7="gross",C6,0)
So the result of If Statement 1 minus the result of If Statement 2.
What I am seeing at the moment in the cell is FALSE and what I want to see is the sum.
If A1 shows 10:00am and A2 shows 4:00pm, then A3 calculates the total number of hours: =(A2-A1)*24
But if A1 shows "Off," then A3 shows 0: =IF(A1="Off",0,(A2-A1)*24)
Now, if I want to change "(A2-A1)*24" to another if-statement, how do I do this? I can always set up a hidden cell (A4) that contains the results of the first if-statement, and then say: =IF(A1="Off",0,A4). But can I do this without going through all the trouble of setting up hidden cells?
Each row represents a call. If a call in column A equals "CW" and it has the highest duration (H:MM:SS) value in column B, then provide me the date (MM/DD/YYYY) for that call that is stated in column C.
i.e.
Column A --- Column B ---- Column C
AB ------------ 0:02:22 ----- 04/14/2007
CW ----------- 0:03:13 ----- 04/16/2007
CW ----------- 0:01:42 ----- 04/13/2007
Thus, the value that should be returned is "04/16/2007".
I have a problem with a formula inserted with control+shift+enter
The formula is
MEAN(IF(' VALIDATION'!$G$2:$G$59999=D30;'VALIDATION'!$E$2:$E$59999))
In the Validation sheet I have the column G with values 0 and 1, and another column E with numeric values.
Changing the value of cell D30, the formula will calculate the mean of the values in column E that have a value equal to D30 in column G.
The problem is that this function works when D30=1 and not when d30=0, in this case the formula returns N/D.
I have tried using also text values instead of 1 and the formula works . The problem is only when D30 is 0