I've tried changing the cell format of some number values to text, so the numbers are not read and calculated in to certain formulas, but they're still included in the calculation. I need all values to display in the spreadsheet, but I need exclude a range that would vary.
Is it possible to just change the cell format, so numbers are ignored by a formula?
How can I drop the whole number part of a number and leaving only the decimal part of the number. Then multiply the decimal part of the number with a number. Then repeat this in a sequence. The object is to convert Lat and Long decimals to Hr. Min. Sec.
eg. 53.535663 .535663*60=32.13978 .13978*60=8 53 32 8
eg. 113.352640 .352640*60=21.1584 .1584*60=9 113 21 9
eg. 113.306579 .306579*60=18.39474 .39474*60=23 113 18 23
I have a list in Excel with several hundred 8 digit ID numbers in column D. Column C contains the total number of hours the student employee worked. Column E needs to calculate using two different equations depending on if the ID number in column D is a manager's. If the ID number is an employee the total hours worked is divided by 8. IF the ID number represents a manager the total hours worked is divided by 4. I've attempted this by using an array for the manager ID list and also using VLookup without success.
In essence I need to loop through column D, check which type of ID number is present, and then enter the correct formula in column E.
I have a formula that will be used by others to obtain a certain result by altering a number in the formula. What I would like to do is make that number obvious as the one that can be changed. The formula reads - "=(M48+P48+Q48)*0.08453-(((J48+K48)*$K$4)*0.1)" -what I would like to do is color the 0.08453 in the Formula Bar so it stands out.
View 4 Replies View RelatedIn column A I have
A1 = Monday
A2 = Tuesday
A3 = Wednesday
A4 = Thursday
A5 = Friday
B1 – B5 contains values, one of which is zero (b2)
I need to take the value in B5 then divide it by the average of B1:B4, however I need it to ignore the zero
I am trying to figure out how to ignore a #VALUE! error in my OR formula. I am using this formula for conditional formatting and I don't want to correct the error because I am using the errored out cells as a fourth conditional format since you can only use three in excel. This is my formlua:
=OR(N4>0,O4>0,P4>0,Q4>0,R4>0,L4>0,Q4>0,K4>0)
How can I modify this formula so that the whole formula doesn't error out if one of the cells has #VALUE! in it?
I am making a summery table of lots of soil contaminant data.
In my summery table, for each determinand I want the average value automatically taken from data from a number of other tables within this same spreadsheet.
For example, for pH- I would average the pH value found in each table, from cell D6, G24 and AB9.
The problem:
Out of the three tables where I take each pH value from, on occasions only one will have a value- the other two will be "0".
How do I ensure that, when averages are taken, it will always ignore '0' values?
I have a data set for a call centre that displays each staff member's daily call numbers across two different call types (Call Type 1, Call Type 2) - staff only work on one particular call type each day. I would like to create two pivot charts, one with daily/weekly/monthly averages for Call Type 1, and one for Call Type 2.
On the Call Type 1 pivot chart, is there any way to exclude staff members who only work on Call Type 2 by ignoring zero values and not displaying their name on the horizontal axis? Currently, if a staff member was working on Call Type 2, they will still display in the Call Type 1 chart as a gap. I have read in other forums that you can set a minimum value on standard Excel charts, but I can't see how to do this on a Pivot Chart.
having a different calculations performed within a Textbox on a Userform depending on the selection made in a Combo Box. This was answered here.
Perform Calculation In Textbox On Userform
I have another question regarding this problem, however the thread is closed so I have posted a new thread.
The original question was answered and the solution works very well,however I now need to be able to use the selection from two (2) comboboxes to initiate the various calculations in a similar vain.
have a look at the original thread to get an idea of what I am looking for here.
I have tried many configurations of various code, all of which works to an extent buts which falls over in certain circumstances.
I am trying to display result of risk assessment matrix in excel. I have three columns PROBABILITY , IMPACT and RISK RATING (probability *impact).
Probability = Very Low(1), Low(2), Medium (3), High (4), Very High (5)
Impact = Low(1), Medium(2), High(3)
Risk Rating = Low (value between 1 -3), Medium (value between 4 - 6), High (value between 7 - 15)
Is there any way that I just use TEXT in the cell (visible to user) and excel does its magic in the background using the numbers that I have for each TEXT? I don't want to display numbers.
Why the following (do it in the immediate pane) gets the wrong answer in VBA.
[Code] .....
this should return 0.1 but what you get is
9.99999999999996E-02
I am working up a workbook template that will be used to process survey results. The way I ultimatley want it to work is that the user can paste data from another application into a worksheet in Excel, and then view analysed results on a second sheet (which are processed via formulae on a third, hidden sheet).
The problem I have is this: the data from the program that's capturing them are text values. For example, column B contains answers to a question where participants rate an experience, and the values are either "Excellent", "Good", "Fair", "Poor", "Awful". I want these to be converted to numerical values, on a scale where "Excellent" = 5 and "Awful" = 1, so that I can then average these.
So, the question is: Can I somehow tell Excel that "Excellent" = 5 and "Good" = 4 etc, and then use AVERAGE(B:B) on the text data and get a number back?
I did think of having an intermediate sheet that used VLOOKUP to create a copy of the first sheet (where the user pastes the text data) with the text replaced by numbers. But, because I don't know in advance how many rows will contain data (i.e. how many survey results there will be), I have to assume on the high side and copy down 50,000 rows. But, this takes ages to calculate.
Using Excel 2003. I have a data range for a graph. The values in the cells are the results of a simple If function - If(m28>0,n28,0). The results are taken from a larger data input exercise. But, the graph line (a simple graph!) plots the FALSE value (0) when I would like there to really be no value & hence no plotted point if the result is FALSE.
View 4 Replies View RelatedUsing Excel 2007
I have a table of four columns
First column is the Julian Date 1-365
The others are summarys per Julian date
Some Julian dates don't have any date to summarize
When charting How can I ignore the zero values and the associated Julian date, without literally removing each and every row manually that has no data?
The sheet has a price list (I attached the sheet). its a width x height(drop) format. If width or height <= minimum width/height then use the minimum listed. if width or height > minimum <=maximum then lookup in table next heightest value. here is the complication. any oversized items are priced as roundup((size -biggest size) / (biggest - second biggest size),0) * ( price of biggest-price of second biggest). so if my widths are
4600 4700 4800
10 25 35
and I am pricing 5050 I would do :-
calculate howmuch its oversize
5050-4800 = 250
Calculate the difference in the last 2 sizes
4800-4700 = 100
Calculate the rounded up multiples
250/100=2.5 rounded up = 3...........
I have a list of grades they are 3a, 3b, 3c, 4a, 4b, 4c, etc up to 7a. An a is one grade than a b, and a b is one grade higher than a c. In one test a student may score a 4b and in another a 4a. I need a way to calculate the difference in "grades" e.g if a student scores a 4a in test 1 and a 5c in test 2 the difference is 1.
Is there a way I can do this using custom formatting or will I have to assign values to the grades and insert extra columns to do the calculations. I need the simpliest way as I have to disseminate to my staff in my department.
I have in column D starting D9, I have numbers starting at 1, and may finish at 100. But there could be duplicates, 1,2,3,3,4,5,6,6,7,7,8,9,10,10,11,12,13,.........
I would like to only copy the range D9 to H (End of column D), ignoring all the duplicate numbers, to another sheet.
So on the second sheet, it would be 1,2,3,4,5,6...... with the data copied from E,F,G and H.
I have a column of numbers and want to make sure everything has been entered correctly from our scanning software. Basically, I want to automatically highlight any cell that has any letter in it (e.g. z12o2 instead of 21202 or R705 instead of 5705), ignoring any cells that contain only numbers. I haven't had any luck using conditions based on formulas like =ISTEXT.
View 2 Replies View RelatedI have this formula which is counting the number of cells in a column that fall within each calender month.
However, if there is a formula at the bottom of column B and C that yield a "", the formula breaks.
In my workbook, B/C:133 have a formula =""
I will need the formula in column E to work if there is a formula that yields a "" in column B and C.
I have a large amount of data and I'm trying to count how many unique values I have in one column. I also want to know how many times each duplicate appears. I tried using a pivot table but it's not working for me.
I also tried the following formula: =SUM(IF(FREQUENCY(H:H,H:H)>0,1)) but it's not quite working.
I am trying to come up with a macro that selects values from one sheet and inserts them into another sheet. The number of values will change each time based on the user's entry, as well as the number of times that each entry should be pasted.
For example:
Entry: X | Y | Z
Number of Times to be Inserted to New Sheet 3 | 2 | 1
Result:
X X X Y Y Z
I have spent a while trying to figure it out, however the best I can come up with is using an array, but I can only get one value from the array to paste multiple times:
(*Note: In my testing, I didn't insert into new sheet or set up the array to handle different values, I was just trying to get the basic idea to work)
Dim A(1, 3) As Variant
A(1, 1) = Range("C3").Value
A(1, 2) = Range("D3").Value
A(1, 3) = Range("E3").Value
[Code].....
What I have In Column B, I have the datesIn Column I, I have engineers name What I need I want a macro to generate Serial Nos. (1,2,3....... n) in column A If an only if the date in column B is today's date and the engineer's name matches with the PC's username
The following is my code
[Code] ....
Above code runs without errors but does nothing.
I have 12 columns of data. In those 12 columns of data I have 3 digit numeric IDs. I want to count the unique number of IDs for each row. I have about 14K rows.
What would be the best way to do so?
Some rules about how the data is stored. I have 12 columns of data with anywhere from 1 to 12 columns having data for each respondent. Data always fills left to right and never skips columns.
I have attached an example file that represents how the data is stored and the output I would like (Unique Count).
I have used the formatting option to make numbers that once appeared as 1, 2, 3, 13, etc into four digit numbers, to appear as 3001, 3002, etc.
The problem is, I have other data whose original values are the 3000 formats, and Excel won't combine the two or sort them correctly.
Is there a way I can format it to change the actual value?
I am trying to figure the sum of cells B12:B28. However some of the cells in the range have a #N/A error due to a VLOOKUP function that is pulling data from a different sheet. Currently the data it is pulling is a blank cell, but will at some point have a value in it. How can I make the SUM function ignore the #N/A?
View 5 Replies View RelatedI have a column of numbers that are calculated by a formula that doesn't always come up with an answer and returns the value #NUM!. See the attached XLS. The answer to the sum function is always #NUM! if a #NUM! is included in column of values put into the SUM function. I currently work around this issue by redoing the column with the SUM statement to avoid the #NUM!'s. Is there a logical test that can be applied to solve this issue? an I add another column that reset the #NUM! to ZERO and then SUM that column?
View 4 Replies View RelatedI want formula to leave cell empty if there is 0 somewhere but to real value if there is something else.
So far I figured how to do the first part.
=IF(A1;"0";"")
I have Dynamic named ranges (SUMPV)
SUMPV is range I31:I300
I use the following formula to sum up.
=SUM(SUMPV)
The problem is that sume cells night produce #value thus giving an error in the Sum formula.
I tried the =SUMIF(SUMPV,"#N/A") but not working..
I am using a lookup function to return nalues to a column. Some of the values returned are ### and I cannot SUM this column. I either need to adjust the lookup formula to not return ### or adjust the SUM function to ignore ###.
View 5 Replies View RelatedI need the folwing formula to ignore any 0 in column Q, and rank only values of 1 or greater.
=RANK(Q6,$Q$6:$Q$20,1)