In column A I have
A1 = Monday
A2 = Tuesday
A3 = Wednesday
A4 = Thursday
A5 = Friday
B1 – B5 contains values, one of which is zero (b2)
I need to take the value in B5 then divide it by the average of B1:B4, however I need it to ignore the zero
I am making a summery table of lots of soil contaminant data.
In my summery table, for each determinand I want the average value automatically taken from data from a number of other tables within this same spreadsheet.
For example, for pH- I would average the pH value found in each table, from cell D6, G24 and AB9.
The problem:
Out of the three tables where I take each pH value from, on occasions only one will have a value- the other two will be "0".
How do I ensure that, when averages are taken, it will always ignore '0' values?
E11 through E24 contains numbers and a few errors (#N/A) that need to persist (the errors need to show).
E10 needs to show the average of the numbers that are in E11 through E24, and just ignore the errors.
I have many columns like that - where the errors need to show and I need to show an average of the number/values that do appear, ignoring the errors.
I have specific cells A5, C5, D5, F5, H5 that I require and average value for but need to ignore those cells that have a zero value in the averaging.
View 5 Replies View RelatedI am doing an average of a column of cells. How do I tell excel to ignore the blank cells in the column and not calculate them in the average?
View 9 Replies View Relatedi get a problem in preparing a roster i went to ignore blank cells in calculating rank. and also i went to make the sum to be empty is one of the cells in a range is zero
View 1 Replies View RelatedI am trying to figure out how to ignore a #VALUE! error in my OR formula. I am using this formula for conditional formatting and I don't want to correct the error because I am using the errored out cells as a fourth conditional format since you can only use three in excel. This is my formlua:
=OR(N4>0,O4>0,P4>0,Q4>0,R4>0,L4>0,Q4>0,K4>0)
How can I modify this formula so that the whole formula doesn't error out if one of the cells has #VALUE! in it?
I have a data set for a call centre that displays each staff member's daily call numbers across two different call types (Call Type 1, Call Type 2) - staff only work on one particular call type each day. I would like to create two pivot charts, one with daily/weekly/monthly averages for Call Type 1, and one for Call Type 2.
On the Call Type 1 pivot chart, is there any way to exclude staff members who only work on Call Type 2 by ignoring zero values and not displaying their name on the horizontal axis? Currently, if a staff member was working on Call Type 2, they will still display in the Call Type 1 chart as a gap. I have read in other forums that you can set a minimum value on standard Excel charts, but I can't see how to do this on a Pivot Chart.
I've tried changing the cell format of some number values to text, so the numbers are not read and calculated in to certain formulas, but they're still included in the calculation. I need all values to display in the spreadsheet, but I need exclude a range that would vary.
Is it possible to just change the cell format, so numbers are ignored by a formula?
Using Excel 2003. I have a data range for a graph. The values in the cells are the results of a simple If function - If(m28>0,n28,0). The results are taken from a larger data input exercise. But, the graph line (a simple graph!) plots the FALSE value (0) when I would like there to really be no value & hence no plotted point if the result is FALSE.
View 4 Replies View RelatedUsing Excel 2007
I have a table of four columns
First column is the Julian Date 1-365
The others are summarys per Julian date
Some Julian dates don't have any date to summarize
When charting How can I ignore the zero values and the associated Julian date, without literally removing each and every row manually that has no data?
I have in column D starting D9, I have numbers starting at 1, and may finish at 100. But there could be duplicates, 1,2,3,3,4,5,6,6,7,7,8,9,10,10,11,12,13,.........
I would like to only copy the range D9 to H (End of column D), ignoring all the duplicate numbers, to another sheet.
So on the second sheet, it would be 1,2,3,4,5,6...... with the data copied from E,F,G and H.
Is there a formula that would allow you to take the average of all values within a range but not count the zero values? I thought something like this might work but it's not. Neither one worked.
=AVERAGEIF($E$4:$E$34,">0")
=AVERAGEIF(E4:E34,">0")
I have a list of values on my spreadsheet in a similiar order to this:
17.91
16.59
15.00
14.86
13.56
12.17
11.01
0.0
I use the average function to work out an average for all the values, but since the value of 0.0 is showing i should not include this as an average. the range of values above (8) will always be the same for the month - so i need to find a way of omitting the 0 value without keep changing the formula
I have a column with values from P2 to P3077. I need a formula that would average values from P2:P6, P7:P11, P12:P16 and so on till the end (that is 5 data points each time till the end).
View 2 Replies View RelatedColumn B: The day of the week that the date is, Sunday, Monday, etc.
Column C: Every date in 2008
Column D: my data (the number to be averaged)
What I need the formula to do:
Look in Column B for every instance of "Sunday", and count them up (they count only if the data in column D is not 0) and use that number to average the number in column D
So if I have 52 Sundays and we are only 4 weeks into the year and the 4 data points are 50, 100, 75, 25. The average will be 62.5 instead of 4.8 (divided by 52).
I was wondering if anyone could help me with the following problem:
I have a clumn of numbers, let's say 100 numbers. I want to extend the column to 200 numbers (spread it out so to say). One way is to insert the average of two adjacent numbers between them, but how would I do that in Excel?
I would like cell B2 to show the average of the next 5 non blank values in row 2 (C2-Z2). The problem is there are varying blank cells (non data points) depending on each row. So i need the forumula to account for just the first 5 immediate non blank cells.
View 14 Replies View RelatedI have a table of data covering the last 9 months based on values automatically collated from 15 minute intevals.
The date/time is in column A (01/01/2009 00:00) with the data collected in column D.
My wish is to get the average daily data from column D and I am slowly losing my head!!!
Is there anyway of getting a formula to auto-average the daily values bearing in mind there are currently 96 daily entries.
I have tried converting the first 5 digits of column A to numeric (i.e. 31894 for 01/01) then trying to write a formula saying =average(D1:D24577,if(range="31894",1)).
I can now see a simpler way but am so confused after an hour or so of trying.
Each day has 96 readings so I need an auto adding formula. average column cell A would say =average(D1:D96).
Is there are way to have the cell below auto-update itself to look at the next 96 values and so on and so forth?
away to average non 0 values from selected cells. So if the cell value is 0 do not include it in the denominator
This is what I'm trying, but I get error "#value!"
=SUM(H25,H21,H17,H13)/(--(SUMPRODUCT((H130*1),--(H170*1),--((H210*1)),(H250*1))))
I have Column A which is an Employees birth Year, Column B which is salary, and Column C which is a list of Years.
I need a formula to read the Year in Column C, refer to Column A finding all the rows that match that year, than refer to Column B (salaries) and find the average of the salaries.
I am trying to do a stock ( goods) inventry for a catering industry, meaning most good swill keep havinf cost prices changing.
I am trying to use a LIFO system. To achieve the end result, i am trying an average formula and i am trying something as follows:
=SUMIF(I4:I20,">0",I4:I20)/COUNTIF(I4:I20,">0")
To try it out, i created a similar page with the same amounts but using a normal multiplication and division formula, the totals dont marry.
Members in our club enter competitions each month and receive scores. I want to be able to average the top five scores from the last ten competitions each member entered, keeping in mind that not all members enter all competitions and will score 0 in this situation.
Its easy if members enter every competition, but I want a formula that will work also for when members may only enter 10 of the last say 15 competitions and I still need to find the average of the top 5 scores.
Member Name is in A1, and then scores are in A2-A25.
I created a pivot table in which sales amounts are represented and a derived table in which market share percentages are showed. Now i am looking for a formula that is able to calculate average market share values. Depending on which country i selected in the pivot table and which category, the number of active companies are changed. How can i formulate this formula to calculate average market share percentages in a certain period. check out my attached file to clarify the situation.
View 2 Replies View RelatedI need to get the average of every 6 cells, but the first value of each group of 6 is the last of the previous group. I'd also like the output to be displayed beside the last value in each group. i.e.
CELL B7 =AVERAGE(A2:A7)
CELL B12 =AVERAGE(A7:A12)
CELL B17 =AVERAGE(A12:A17)
etc.
I saw this "=AVERAGE(OFFSET(A$1,(ROW()-ROW(B$1))*10,,10,))" in another post which seems similar but how to modify it.
I have a table full of phone numbers and call durations.
In A2:A6160, I have 162 different phone numbers and in U2:U6160, I have the call durations for calls made to those numbers.
In a separate spreadsheet, I have each number listed in Column A and in Column D, I want to display the average call duration for each of the numbers.
Book7.xlsx
The workbook is attached.
Columns B,C,D,E have the desired result in row 18.
What I want the formula to do is starting from row 13, go up and average the next 7 values that are not blank. If its easier, the starting point could be row 4 and I could adjust my data.
I have a list of groundwater level values in 800 different wells that were measured in April and October of each year from 1982-present. The problem is that they are listed in order:
Date ELV
04/16/1981120.37
09/17/1981119.25
04/10/1982120.52
10/10/1982118.1
04/10/1983124.36
10/10/1983120.43
etc....
I want a formula that will average all the April values and another one that will average all the October values.
I have 4 columns of data, and need to average values that correspond to certain criteria from the other 3 columns. Attached is an example of my data and the desired output. The averages need to come from non-blank cells from Inputs 1 and 2 that match the criteria from the Name column.
View 5 Replies View RelatedI have lists of numbers in a columns and would like to elliminate high outlier values in each column. Each list is different so there's no way to just set a max value and say that any value above it is an outlier. What I'd like to do is to average the top 5 or so max values for example, and then say that any vale above this average is an outlier. So a formula such as =average (max1,max2,max3,max4,max5) would work if it's possible to derive max1, max2 and so on. Or maybe there's a different way of accomplishing this?
View 3 Replies View Related