Excel 2007 :: How To Ignore Zero Values And Associated Julian Date
Jan 15, 2013
Using Excel 2007
I have a table of four columns
First column is the Julian Date 1-365
The others are summarys per Julian date
Some Julian dates don't have any date to summarize
When charting How can I ignore the zero values and the associated Julian date, without literally removing each and every row manually that has no data?
So I am pulling some data fields from a pivot table....most of the cells will be a zero....but for the ones that populate text, I want to concatenate the words together with a comma in between into the AN cell at the far right and ignore the zero cells....
I work with several dates in Excel 2007. What forumula can I put in a blank cell that would change the below "Start Date" to 3/1/12 if the date displayed is less than 3/1/12? Also, if a cell in the "Start Date" column is blank, how can I populate a blank cell with a specified date value such as 3/31/12?
I'm a Marine Officer in Iraq and one of my reports requires me to determine how many days have elapsed since the last time one of my helicopters has flown. We utilize Julian Dates to refer to aircraft fly dates and one of my reporting requirements is to note any aircraft that haven't flown in 30 or more days. Essentially, I want to count how many aircraft haven't flown within the last 30 days. Cell D4 has my current Julian Date (let's say 07070). I have a cell range of D7 through D22 that lists all of the last days that my aircraft have flown. I would like to have a formula that counts the long term down aircraft. I tried something similar to this:
Using Excel 2003. I have a data range for a graph. The values in the cells are the results of a simple If function - If(m28>0,n28,0). The results are taken from a larger data input exercise. But, the graph line (a simple graph!) plots the FALSE value (0) when I would like there to really be no value & hence no plotted point if the result is FALSE.
how to convert the JD Edwards Julian date format into standard Gregorian date, and can it be done using VBA? Note that the JD Edwards Julian date is different than the standard Julian Date and uses 6 digits instead of 7.
I have a table of data (total 142 rows). Column contains dates, in the format dd-mmm-yyyy.
I tried to filter using DATE FILTERS->EQUALS and in the custom filter window, I chose EQUALS then picked a date from the date picker icon. The date I picked was 5/4/2009 (this is May 4, 2009, formatted automaticall by excel as m/d/yyyy).
When I clicked OK, nothing showed up despite the fact that there are 6 occurences of May 4, 2009 (formatted as dd-mmm-yyyy in the data table)
So my questions are:
1. Is this due to the formatting?
2. Is there a way to change the date format supplied by the date picker?
I want to create an excel sheet so that I can price out computer hardware so that I can see what it will cost compared to what we would sell it for I have the basic idea laid out but I'm running into a problem with cells that don't have any information in for pricing. I get a "#DIV/0!" for the formula that i have worked out.
I don't want to change the information in the cells that I have for pricing I just want it to show 0 and call it good. The other isssuse that i'm have at the bottom of the page I'm trying to show the totals for everything.
I did a simple (=F4:F34) to Show the total of all the information in the column but it's showing up "#VALUE!" I know that this is from the earlier error so if I could be shown how to make these errors go away that'd be great the final product that I would like to have is I want to use a macro to transport some of the information to a word document so that I can print it off and show our customers a quote without them being able to see the cost on everything.
I am working with excel 2007 in windows 7. I am working with small animals that have been outfitted with a RFID (radio-frequency ID) tags with unique UID codes. In a sheet called Tag_info I have a list of the unique UID's of the tags that are in use along with a number of parameters (the colony in which the animal with this tag is situated, if it was treated with something, its age etc). I left out most of the parameters because they aren't relevant to my question, but it looks like this with each UID only once in the list:
A B C
1 UID Colony Treatment
[Code] ........
In a 2nd sheet, a ton of data is saved by the scanners that read the tags as the animals pass by scanners in a number of locations. The relevant data for my problem is basicly the timestamp (UTCTime_Rounded). Since animals pass by the same scanners multiple times, and scanners may read the same 'passing' as multiple signals the column with UID's here contains tons of duplicates (unlike in the Tag_info sheet where every UID is only displayed once). Once again, I left out the irrelevant data for simplification so that the data looks like this:
A B C D
1 UID Address UTCTime_Rounded Age at read
[Code] ........
So finally, what am I looking for? I want a formula to look up the UID's from the Tag_info sheet to find and return the first and the last timestamp (UTCTime_Rounded) for that UID in the RFID_Scan_values sheet.
So that formula basicly has to return the min and max values for UTCTime_Rounded, for each of the UID's in Tag_info. The output would look like this (I did it manually for this dummy dataset since I didn't get any formula to work yet):
A B C D
1 UID Colony Treatment First scanned
[Code] ........
Tag info And then a similar column for the Last scanned, max values.
Sheet1ABCDEF1THE SUM OF2GAME NUMBERSINDIVIDUAL 3GAME NUMBER41101928=152112029=263122130=374132231=485142332=596152433=6107162534=7118172635=81291827369Excel 2007
Sheet1HIJKLMN12Last Nights Fantasy 5 Numbers3411/11/12051922293256sum of 7digits/#5142589pattern21110101112Full PkgAll Possible Patterns of 13CombinationsSum Of Digits1415129,0241111116193,536211101736,288221001816,12831100191,728320002028841000Excel 2007
Need a formula in Cols J7:N7 to return the sum of the values input in J4:N4 as a single digit. The table in the first image shows what the results should be.
Is there any formula that I can use when working with a specific date range and if someone's birthday falls in that range a certain text or value would be displayed? For example I want to create a spreadsheet for my soccer players and have them sorted into teams according to their birthdays. So if their birthday falls into the following date range: 08/01/05-07/01/07 a U-8 or U-10 would be displayed in the corresponding cell. I tried working with the IF function.
User of Excel in Office 2007. However, I for statistics about how my Bitcoin Device's works and decrypts Bitcoins per day for trends and statistics, and so on
Now while I was away so had the power gone, and for almost 24 hours so stood all still, I would now like to outline in red the date / dates where I have zero or very low running time for specific date, but I can only change Fragen for all dates, not individual dates.
The stack's not exist in the data value is equal to zero (null) where by I want to be able to get the date in red color, and possibly also in bold. see print screen below.
I am trying to find a way in Excel 2007 to convert the date from US format to UK format, I tried to change it by using [right click=>Format cell=>Select Date=>Select the first option in Type:*14-03-01=>OK], but I doesn't work , the attached file are presenting the date in US format.
In column B3:B367, I have dates for every day of the year. In column D3:D367, I have body weight for every day of the year. This gets filled in on a daily basis.
What I'm looking to do:
1. Find the first daily weight for the month. 2. Find today's weight. 3. See if today's weight falls within the specified month. 4. Compare the first daily weight of the month with today's weight.
I am able to accomplish #1 with LOOKUP, #2 with LOOKUP, and #4 with IF/THEN. For the life of me, I cannot comprehend how to do #3.
I have 50 000+ rows that covers fiscal years from 2006 to 2014 and I want to calculate how many unique clients are there per asset type per fiscal year. In addition, the results table needs to adjust to filters i would use on the raw data..
I am using Excel 2007. I have a table with department names and the number of employees in each department. Currently, I'm using the formula :
=SUM(C12,C16,C20,C24,C28,C32,C36,C40,C44)
However, if another section is added to the database I have to update each formula. I'm looking for a way to get my totals no matter how many sections I add to the table.
I have a workbook with several tabs. the first tab is a data input sheet: subtotals from this sheet get posted to cells on the other sheets. at the top of the Data sheet is a drop down validation list that the user will select the next month from. On each of the other sheets, is a grid with calendar months down the left hand side and years across the top:
I am trying to figure out a simple method to check whether there is data on any of the four other sheets in the spot corresponding to the month selected by the user on the Data tab. the format of the validation list dates are dd/mm/yyyy in cell B2 on the data tab.
I have 4 different excel files in C:Reports (SupplierA.xls, SupplierB.xls, SupplierC.xls and SupplierD.xls) all with a page called "Summary" (like below) in a set range A2:F5.
I also have a summary excel file in C:Totals called "Supplier Totals" that has a summary page that I want to total up all my suppliers A, B, C and D (same as above A2:F2). How can do this in VBA?
In the workbook the sheet names are month names e.g. july,august,September etc and 1st of each month is to be entered in a cell in each the sheets. By some trial and error I wrote this macro
VB: Sub test() Dim j As Integer, monthnr As Long, monthname As String For j = 1 To Worksheets.Count
[Code]....
This worked in July sheet it is written as 7/1/2013 and in august sheet it is 8/1/2013 etc Then I shortened the macro like thlis
VB: Sub test() Dim dte As Date dte = "july" & "/1/2013" Range("A1") = dte End Sub
It worked. Even if I use shortened 3 letter form of month like "Jul" or "aug" then also it works
But if type on the spreadsheet itself ="july"/1/2013 It Gives value error.
Perhaps it works only in vba and not spreadsheet.
I accept nobody is going to use "july" & "/1/2013" instead of 7/1/2013 But this will be useful if sheet names are month names so that when we write the date we can use sheet names Mine excel 2007 and windows 7.
I have an Excel report that I import from IBM Clear Quest tool (Web App). A field, 'Submit_date' in this report has data in the following format:
'Jan 12, 2012 12:00:00 AM'
If I double-click in the cell the cursor is after the AM. When I click outside of the cell, the date time stamp changes to 1/12/2012.
My question is, how to change the entire column so that all data gets converted to short date (mm/dd/yyyy) and thereby making it a data sortable field.
I select the date from drop down calendar in excel and linked with one cell. when i use the date in vlookup formula it does not work due to linked cell date format.