if I use the following formulae in A1 and fill it down, I get the serialization 1,2,3....etc. =(INT((ROW()-1)/1)+1)*1
But if I begin formulae at A11 and fill down, I get 11,12,13.....etc. Now I type 1 in A11, how do I modify the formula so that A12 will be 2, A13 will be 3, A14 will be 4 and so on ?
I have a requirement where I want my list should auto increment with number only.
For example: I want to fill below text in cell and when I drag the cell( Along the column A) and fill the rows downward it should automaticallly incremented.
Data in one cell say (A1) is like 001_TCO_CM, now I want to drag data present in cell A1 and wants data in cell A2, A3, A4 etc... it should get increment like
A2 = 002_TCO_CM
A3 = 003_TCO_CM
A4 = 004_TCO_CM
and so on...any method or way present in Excel 2003 so that my series should get auto filled.
I have a spreadsheet with 2100 rows. I am trying to fill one column with a numbering system that fills the same number in for 21 cells and then increases by one. For example:
when a user answers yes to a question a ref number is generated. Which works fine. The problem that im having is when a no is changed to yes the ref numbers get incremented but they all get misaligned.
Not sure if the tabel will come out right when i post it.
Where the no has changed to yes it has changed all the ref numbers below the no
I've created a spreadsheet that tracks problems using an assigned problem number. Attached is the spreadsheet.
I need assistance in inserting a new row and incrementing the sequential number after pressing the "Get/Assign New NCR Number" button. I am successful at getting a new row added, but am not able to increment the number. In addition, I would also like to have the table locked so that no deleting or amending the sequential number is allowed.
way to do this in plain excel (no macros, I have sufficient knowledge to do it in VBA but certain circumstances do not allow me to).
I want to insert a relative formula into a cell based on a condition.
For instance, I have a number N=10 (changeable). And the following cells with corresponding formula: A1=1 A2=A1+1 A3=A2+1 ........
Is there a way to automatically insert that relative formula to the next cell until its value is larger than N? I don't want to use IF and then copy to 65000 rows either, it will create blank cells that I don't want to be there (and it affects the printout as well as the scroll on the right).
In sheet1, (B2 & C2) are the numbers entered by the user. After they entered, it will create rows of table according to the number of groups they entered on the respective sheets.
I’m using this code to change the value of an active cell with a spinner named: 1.
Private Sub Worksheet_SelectionChange(ByVal Target As Range) Dim lNum As Long If IsNumeric(Target) Then lNum = Target If lNum = Target And Target >= 0 Then With Me.Shapes("1").ControlFormat .LinkedCell = vbNullString .Value = Target .LinkedCell = Target.Address End With Else Me.Shapes("1").ControlFormat.LinkedCell = vbNullString End If End If End Sub
The problem is, that whenever I click or activate a cell its value automatically changes to 0. The spinner works just fine modifying the value of the activated cell. The problem is that this code somehow causes all the decimals such as 0,3 0,1 or 0,8, entered manually, to change to 0. This way only integral numbers, such as 1, 45 or 100 are accepted. I must truly say I have no [no need to swear - mod] idea how to fix these problems meaning the automatically inserted 0 and the fact that the sheet doesn’t accept decimals changing them to an integral number.
I was recently issued an alphanumeric range that I would like excel to manage for me. The alphanumeric numbers contain 5 characters. The basic pattern starts zero to nine, then A-Z, then 10. For example, A0500 through A0509, A050A-A050Z, A0510-9, A051A-A051Z, A0520-A0529, etc.
Is it possible to increment / decrement cells using wild characters? I've found myself needing to increment values at different position, for e.g. :
ABC-###-FR05-AB ABC-222-FR##-AB C##445-KJ
where I would want to be incrementing # placeholders. It would help if I can give it a start number, and the increment amount (which can be different than 1).
What about possibly extending it a bit more to include two or more place holders at the same time as follows:
ABC##- FR*** (where # would have its own starting number and increment value, and * would have its own).
I am working on a sheet that has dynamic data saved. For any new value, a new row is inserted. I want to add a counter or more like an index so that I can see the number of the rows. I know that excel has is on the side but, I want to be able to make calculations. Like average of the numbers. Lets say I have 512 rows added. I want to be able (automatically via vba) to set the average with a sum of the values/ 512 which will be the number of the code I am asking. So I want a code that will start with the number 1 at (lets say) cell B2 and it will go like B3=2, B4=3.... any time a new row with data is added.
I have a excel file to print label on a label printer.I've added additional file in this message.I'm printing different numbers of labels with this file.for example, if I print 10 pieces of labels, I want to write 1/10 , 2/10 , 3/10 etc. on each label.I finded a vb code to print this work but not exactly the way I want.I would ask one of excel guru's to look at my file.
to copying a formula from one column to the next adjacent column and also incrementing the 2 numeric values inside the formula. Please see attached sample.
One value increments with each new column whereas the other increments with each new row. Please see attached sample.
And in the last row there is the average formula which must copy the new column and average the new column.
I tried to create a Macro in attached but it did not work with formulas.
I am trying to get my invoice sheet to automatically increment the invoice number when I open the workbook. I know it is in the code i.e. private sub? but it doesnt seem to work.
I am trying to increment a row when i copy it across columns. I have searched for a couple hours on how to do this, but I have not come up with a solution that I can understand that works for my situation.
I found this page, but I guess I am too novice to comprehend it. [url]
I would like the number in this formula to increment when i copy it to the adjacent column.
I have to put different ticket numbers for a company with some code. At present, I am manually copying and pasting data (which is too difficult as sometimes, tickets may be more than 300). So, suggest some easy way out, keeping in mind that I am new to Excel. I want this as output.
Company Name= New Horizons Code=CS/02 Number of Tickets=1/300
Here, I want to increment number of tickets automatically like 1/300, 2/300, 3/300 till 300/300 and all the other entities like Company name and code should remain same. My rest of data remains same except number of tickets through out. I also have to print same data.
What I'm trying to do is from a template worksheet that I have in a workbook with other worksheets, I'm trying to come up with code that will create a new worksheet based on the template (copy), increment the invoice number, and rename the worksheet tab to be "Invoice # xxxx" (new invoice number from prev. step.).
I have figured out how to use a button on the template to execute, but as I said my VBA skills are lacking to say the least.
I am creating a spreadsheet which creates a bulk of data from a front sheet.
The question is: Is there a way to automatically copy a fixed formula for 100 cells using one fixed cell reference such as $A$1 and then automatically after 100 cells replace $A$1 with $A$2, after another 100 with $A$3 and so on?
Explanation with Example:
For example, Sheet1 contains the words "Green Tree" in Cell A1 and Sheet2 will then place "Green Tree" into 100 different sentences such as:
Plant a Green Tree Grow a Green Tree today
This would be created with the formula ="Grow a "&'Sheet1'!$A$1& " today"
After 100 different variations using the formula I want to change that formula to reference cell A2 on Sheet1.
I know if I place "Red Tree" in Cell A2 and use the formula ="Grow a "&'Sheet1'!$A$2& " today" I can do this manually using find and replace for the 100 cells, but I want to do this for 100 different variations of Green Tree to create a 10,000 different sentences so I'd need to find and replace 100 times!
I would like to be able to enter a number in cell a1. Let's say 44.2. I want that number to actually be locked in as 100'-0" in cell b1. Below in the next row I want to enter another number, lets say that one is 41.5 into cell a2. And then I want the cell b2 to return the difference in feet and inches. So ultimately the only cells that I will entering data into is in column a and column b would just return information.
The other thing I am trying to figure out is a formula for converting decimal feet to feet and inches (which I have found) but a formula that is less than 40 characters.
Im trying to enter an employees name into a data list. I have a program that generates a list including their employee number into column B. I want to write something to put the employee name into column C. Im working with 60+ employees so i dont think if statements will work? anyway to reference a chart or table with the numbers and names on it?
I am entering values in columns AV and BD of the attached spreadsheet. Rather than manually editing each value to adopt the decimal place value of the adjacent cell is there a formula that can achieve this before the value is entered? The decimal place values are determined using a VLOOKUP table (column3) on the NES tab.
Is there a function in excel that alerts you if you have entered a number (or word!) more than an agreed amount of times?? e.g. If you have agreed not to input the number 7 more than 3 times in a selected range, but then do so, will excel inform you??
I want to pick the last number entered in column and put it in a formula. Is there an easy way to do this, or do I have to stack a lot of IFs in a string.
I have been working on a spreadsheet with 3 sheets and have done everything except the last function which I just can't work out. Data is entered on the first sheet in a list with an item number, description, dates etc and then finally, if they are a certain type of item, a variation, a 'variation number' in a column.
The next sheet is then called 'variations' and here starts my problem. I want to have a formula that picks up if a variation number has been entered on sheet one in the 'variation number' column and if so, add that item into this sheet, in order.
So to summarise, I need sheet 2 to search on sheet 1 in a specific column for numbers 1-30(ish) for a series of items. I then need sheet 2 to list each of these in order, copying over each item that goes with the number from sheet 1 in the same format.